3.5" inch TFT LCD Display Module 480X320 driven with FSMC.

TFT LCD Display Module 480X320 driven with FSMC

I have recently bought a 3.5" inch TFT LCD Touch Screen Display Module 480X320 with a www.mcufriend.com label on the back side. The display was equipped with an 8bit parallel interface. First I decided to test it with the UniGraphic library using the BUS_8 protocol. The display was very slow but improved when I switched to the PAR_8 protocol. Because I heard about the possibility to use a Flexible Static Memory Controller (FSMC), built into some STM MCU's, to drive LCD's (read/write to LCD's memory rather than to an external SRAM) I thought it would be a fun to try it out.

https://os.mbed.com/media/uploads/hudakz/lcd_3.5_tft_480x320_mcufriend_front.png

Below is the brief story of what I did:

  • Selected FSMC in the Connectivity category and configured it as below: https://os.mbed.com/media/uploads/hudakz/arch_max_fsmc_conf.png
  • Let the STM32CubeIDE generate the code (files).
  • Created a new program for the Seeed Arch Max target in the Mbed Online Compiler by selecting a mbed os blinky template.
  • Replaced the main.cpp with the main.c content of the STM32CubeIDE project.
  • Copy & Pasted the other files with codes from the STM32CubeIDE project to the online compiler project.
  • Renamed and modified:
    "stm32f4xx_it.h" to "stm32f4xx_it_msp.h"
    "stm32f4xx_it.c" to "stm32f4xx_it_msp.c"
  • Added the UniGraphic library to the online compiler project.
  • Extended the UniGraphic library with a FSMC_8 protocol and replaced the TFT::set_orientation(int orient) function with the one used by mcufriend for arduino.
  • Modified the main.cpp as needed.
https://os.mbed.com/media/uploads/hudakz/stm32f407vet6_st-link03.pnghttps://os.mbed.com/media/uploads/hudakz/lcd_3.5_tft_480x320_mcufriend_back.png


Wiring

STM32F407VETFT LCD module
+3.3V3V3
GNDGND
PB_12LCD_RST
GNDLCD_CS
PD_13 (RS)LCD_RS
PD_5 (WR)LCD_WR
PD_4 (RD)LCD_RD
PD_14 (DB00)LCD_D0
PD_15 (DB01)LCD_D1
PD_0 (DB02)LCD_D2
PD_1 (DB03)LCD_D3
PE_7 (DB04)LCD_D4
PE_8 (DB05)LCD_D5
PE_9 (DB06)LCD_D6
PE_10 (DB07)LCD_D7



Results
Execution times
Used protocolBUS_8FSMC_8
Operation \ Timemsms
Clear2283.98038.454
Plot192.06611.365
8bit BMP63.80541.338
Large Font163.8727.895
Sparce pixels2072.265/1458.05174.107/52.168
16bit BMP2288.58959.904
Committer:
hudakz
Date:
Sun May 10 10:44:31 2020 +0000
Revision:
0:fa952828e34c
3.5" inch TFT LCD Display Module 480X320 driven with FSMC.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
hudakz 0:fa952828e34c 1 #ifndef PAR16_H
hudakz 0:fa952828e34c 2 #define PAR16_H
hudakz 0:fa952828e34c 3
hudakz 0:fa952828e34c 4 #include "mbed.h"
hudakz 0:fa952828e34c 5 #include "Protocols.h"
hudakz 0:fa952828e34c 6
hudakz 0:fa952828e34c 7 #if DEVICE_PORTINOUT
hudakz 0:fa952828e34c 8
hudakz 0:fa952828e34c 9 //#include "GraphicsDisplay.h"
hudakz 0:fa952828e34c 10
hudakz 0:fa952828e34c 11 /** Parallel 16bit interface
hudakz 0:fa952828e34c 12 */
hudakz 0:fa952828e34c 13 class PAR16 : public Protocols
hudakz 0:fa952828e34c 14 {
hudakz 0:fa952828e34c 15 public:
hudakz 0:fa952828e34c 16
hudakz 0:fa952828e34c 17 /** Create a PAR16 display interface with a GPIO port and 5 control pins
hudakz 0:fa952828e34c 18 *
hudakz 0:fa952828e34c 19 * @param port GPIO port to use
hudakz 0:fa952828e34c 20 * @param CS pin connected to CS of display
hudakz 0:fa952828e34c 21 * @param reset pin connected to RESET of display
hudakz 0:fa952828e34c 22 * @param DC pin connected to data/command of display
hudakz 0:fa952828e34c 23 * @param WR pin connected to SDI of display
hudakz 0:fa952828e34c 24 * @param RD pin connected to RS of display
hudakz 0:fa952828e34c 25 */
hudakz 0:fa952828e34c 26 PAR16(PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD);
hudakz 0:fa952828e34c 27
hudakz 0:fa952828e34c 28 protected:
hudakz 0:fa952828e34c 29
hudakz 0:fa952828e34c 30 /** Send 8bit command to display controller
hudakz 0:fa952828e34c 31 *
hudakz 0:fa952828e34c 32 * @param cmd: byte to send
hudakz 0:fa952828e34c 33 *
hudakz 0:fa952828e34c 34 */
hudakz 0:fa952828e34c 35 virtual void wr_cmd8(unsigned char cmd);
hudakz 0:fa952828e34c 36
hudakz 0:fa952828e34c 37 /** Send 8bit data to display controller
hudakz 0:fa952828e34c 38 *
hudakz 0:fa952828e34c 39 * @param data: byte to send
hudakz 0:fa952828e34c 40 *
hudakz 0:fa952828e34c 41 */
hudakz 0:fa952828e34c 42 virtual void wr_data8(unsigned char data);
hudakz 0:fa952828e34c 43
hudakz 0:fa952828e34c 44 /** Send 2x8bit command to display controller
hudakz 0:fa952828e34c 45 *
hudakz 0:fa952828e34c 46 * @param cmd: halfword to send
hudakz 0:fa952828e34c 47 * @note 2cycles using pins[7:0]
hudakz 0:fa952828e34c 48 */
hudakz 0:fa952828e34c 49 virtual void wr_cmd16(unsigned short cmd);
hudakz 0:fa952828e34c 50
hudakz 0:fa952828e34c 51 /** Send 2x8bit data to display controller
hudakz 0:fa952828e34c 52 *
hudakz 0:fa952828e34c 53 * @param data: halfword to send
hudakz 0:fa952828e34c 54 * @note 2cycles using pins[7:0], only gram write cmd uses pins[15:8]
hudakz 0:fa952828e34c 55 */
hudakz 0:fa952828e34c 56 virtual void wr_data16(unsigned short data);
hudakz 0:fa952828e34c 57
hudakz 0:fa952828e34c 58 /** Send 16bit pixeldata to display controller
hudakz 0:fa952828e34c 59 *
hudakz 0:fa952828e34c 60 * @param data: halfword to send
hudakz 0:fa952828e34c 61 * @note here using all pins[15:0]
hudakz 0:fa952828e34c 62 */
hudakz 0:fa952828e34c 63 virtual void wr_gram(unsigned short data);
hudakz 0:fa952828e34c 64
hudakz 0:fa952828e34c 65 /** Send same 16bit pixeldata to display controller multiple times
hudakz 0:fa952828e34c 66 *
hudakz 0:fa952828e34c 67 * @param data: halfword to send
hudakz 0:fa952828e34c 68 * @param count: how many
hudakz 0:fa952828e34c 69 * @note here using all pins[15:0]
hudakz 0:fa952828e34c 70 */
hudakz 0:fa952828e34c 71 virtual void wr_gram(unsigned short data, unsigned int count);
hudakz 0:fa952828e34c 72
hudakz 0:fa952828e34c 73 /** Send array of pixeldata shorts to display controller
hudakz 0:fa952828e34c 74 *
hudakz 0:fa952828e34c 75 * @param data: unsigned short pixeldata array
hudakz 0:fa952828e34c 76 * @param lenght: lenght (in shorts)
hudakz 0:fa952828e34c 77 * @note here using all pins[15:0]
hudakz 0:fa952828e34c 78 */
hudakz 0:fa952828e34c 79 virtual void wr_grambuf(unsigned short* data, unsigned int lenght);
hudakz 0:fa952828e34c 80
hudakz 0:fa952828e34c 81 /** Read 16bit pixeldata from display controller (with dummy cycle)
hudakz 0:fa952828e34c 82 *
hudakz 0:fa952828e34c 83 * @param convert true/false. Convert 18bit to 16bit, some controllers returns 18bit
hudakz 0:fa952828e34c 84 * @returns 16bit color
hudakz 0:fa952828e34c 85 */
hudakz 0:fa952828e34c 86 virtual unsigned short rd_gram(bool convert);
hudakz 0:fa952828e34c 87
hudakz 0:fa952828e34c 88 /** Read 4x8bit register data (with dummy cycle)
hudakz 0:fa952828e34c 89 * @param reg the register to read
hudakz 0:fa952828e34c 90 * @returns data as uint
hudakz 0:fa952828e34c 91 *
hudakz 0:fa952828e34c 92 */
hudakz 0:fa952828e34c 93 virtual unsigned int rd_reg_data32(unsigned char reg);
hudakz 0:fa952828e34c 94
hudakz 0:fa952828e34c 95 /** Read 3x8bit ExtendedCommands register data
hudakz 0:fa952828e34c 96 * @param reg the register to read
hudakz 0:fa952828e34c 97 * @returns data as uint
hudakz 0:fa952828e34c 98 * @note EXTC regs (0xB0 to 0xFF) are read/write registers, for Parallel mode directly accessible in both directions
hudakz 0:fa952828e34c 99 */
hudakz 0:fa952828e34c 100 virtual unsigned int rd_extcreg_data32(unsigned char reg, unsigned char SPIreadenablecmd);
hudakz 0:fa952828e34c 101
hudakz 0:fa952828e34c 102 /** ILI932x specific, does a dummy read cycle, number of bits is protocol dependent
hudakz 0:fa952828e34c 103 * for PAR protocols: a signle RD bit toggle
hudakz 0:fa952828e34c 104 * for SPI8: 8clocks
hudakz 0:fa952828e34c 105 * for SPI16: 16 clocks
hudakz 0:fa952828e34c 106 */
hudakz 0:fa952828e34c 107 virtual void dummyread ();
hudakz 0:fa952828e34c 108
hudakz 0:fa952828e34c 109 /** ILI932x specific, select register for a successive write or read
hudakz 0:fa952828e34c 110 *
hudakz 0:fa952828e34c 111 * @param reg register to be selected
hudakz 0:fa952828e34c 112 * @param forread false = a write next (default), true = a read next
hudakz 0:fa952828e34c 113 * @note forread only used by SPI protocols
hudakz 0:fa952828e34c 114 */
hudakz 0:fa952828e34c 115 virtual void reg_select(unsigned char reg, bool forread =false);
hudakz 0:fa952828e34c 116
hudakz 0:fa952828e34c 117 /** ILI932x specific, write register with data
hudakz 0:fa952828e34c 118 *
hudakz 0:fa952828e34c 119 * @param reg register to write
hudakz 0:fa952828e34c 120 * @param data 16bit data
hudakz 0:fa952828e34c 121 */
hudakz 0:fa952828e34c 122 virtual void reg_write(unsigned char reg, unsigned short data);
hudakz 0:fa952828e34c 123
hudakz 0:fa952828e34c 124 /** ILI932x specific, read register
hudakz 0:fa952828e34c 125 *
hudakz 0:fa952828e34c 126 * @param reg register to be read
hudakz 0:fa952828e34c 127 * @returns 16bit register value
hudakz 0:fa952828e34c 128 */
hudakz 0:fa952828e34c 129 virtual unsigned short reg_read(unsigned char reg);
hudakz 0:fa952828e34c 130
hudakz 0:fa952828e34c 131 /** HW reset sequence (without display init commands)
hudakz 0:fa952828e34c 132 */
hudakz 0:fa952828e34c 133 virtual void hw_reset();
hudakz 0:fa952828e34c 134
hudakz 0:fa952828e34c 135 /** Set ChipSelect high or low
hudakz 0:fa952828e34c 136 * @param enable 0/1
hudakz 0:fa952828e34c 137 */
hudakz 0:fa952828e34c 138 virtual void BusEnable(bool enable);
hudakz 0:fa952828e34c 139
hudakz 0:fa952828e34c 140
hudakz 0:fa952828e34c 141
hudakz 0:fa952828e34c 142 private:
hudakz 0:fa952828e34c 143
hudakz 0:fa952828e34c 144 PortInOut _port;
hudakz 0:fa952828e34c 145 DigitalOut _CS;
hudakz 0:fa952828e34c 146 DigitalOut _reset;
hudakz 0:fa952828e34c 147 DigitalOut _DC;
hudakz 0:fa952828e34c 148 DigitalOut _WR;
hudakz 0:fa952828e34c 149 DigitalOut _RD;
hudakz 0:fa952828e34c 150
hudakz 0:fa952828e34c 151 };
hudakz 0:fa952828e34c 152 #endif
hudakz 0:fa952828e34c 153
hudakz 0:fa952828e34c 154 #endif