Diff: bsp/inc/stm32l0xx_nucleo.h

Revision:

0:309c845d289d

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/bsp/inc/stm32l0xx_nucleo.h	Wed Jul 16 04:59:51 2014 +0000
@@ -0,0 +1,274 @@
+/**
+  ******************************************************************************
+  * @file    stm32l0xx_nucleo.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    22-April-2014
+  * @brief   This file contains definitions for:
+  *          - LEDs and push-button available on STM32L0XX-Nucleo Kit 
+  *            from STMicroelectronics
+  *          - LCD, joystick and microSD available on Adafruit 1.8" TFT LCD 
+  *            shield (reference ID 802)
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+  
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L0XX_NUCLEO_H
+#define __STM32L0XX_NUCLEO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal.h"
+   
+
+/** @addtogroup BSP
+  * @{
+  */
+
+/** @addtogroup STM32L0XX_NUCLEO
+  * @{
+  */
+
+/** @addtogroup STM32L0XX_NUCLEO_LOW_LEVEL
+  * @{
+  */
+      
+/** @defgroup STM32L0XX_NUCLEO_LOW_LEVEL_Exported_Types 
+  * @{
+  */ 
+typedef enum 
+{
+  L0_LED2 = 0
+} Led_TypeDef;
+
+typedef enum 
+{  
+  BUTTON_KEY = 0
+} Button_TypeDef;
+
+typedef enum 
+{  
+  BUTTON_MODE_GPIO = 0,
+  BUTTON_MODE_EXTI = 1
+} ButtonMode_TypeDef; 
+
+typedef enum 
+{ 
+  JOY_NONE  = 0,
+  JOY_SEL   = 1,
+  JOY_DOWN  = 2,
+  JOY_LEFT  = 3,
+  JOY_RIGHT = 4,
+  JOY_UP    = 5
+} JOYState_TypeDef;
+
+/**
+  * @}
+  */ 
+
+/** @defgroup STM32L0XX_NUCLEO_LOW_LEVEL_Exported_Constants 
+  * @{
+  */ 
+
+/** 
+* @brief	Define for STM32L0XX_NUCLEO board  
+  */ 
+#if !defined (USE_STM32L0XX_NUCLEO)
+ #define USE_STM32L0XX_NUCLEO
+#endif
+
+/**
+  * @}
+  */ 
+
+/** @addtogroup STM32L0XX_NUCLEO_LOW_LEVEL_LED
+  * @{
+  */
+#define LEDn                               1
+
+#define LED2_PIN                           GPIO_PIN_5
+#define LED2_GPIO_PORT                     GPIOA
+#define LED2_GPIO_CLK_ENABLE()           __GPIOA_CLK_ENABLE()  
+#define LED2_GPIO_CLK_DISABLE()          __GPIOA_CLK_DISABLE()
+  
+#define LEDx_GPIO_CLK_ENABLE(__INDEX__)   (((__INDEX__) == 0) ? LED2_GPIO_CLK_ENABLE() : 0)
+#define LEDx_GPIO_CLK_DISABLE(__INDEX__)  (((__INDEX__) == 0) ? LED2_GPIO_CLK_DISABLE() : 0)
+/**
+  * @}
+  */ 
+  
+/** @addtogroup STM32L0XX_NUCLEO_LOW_LEVEL_BUTTON
+  * @{
+  */  
+#define BUTTONn                            1
+
+/**
+  * @brief Key push-button
+  */
+#define KEY_BUTTON_PIN                         GPIO_PIN_13
+#define KEY_BUTTON_GPIO_PORT                   GPIOC
+#define KEY_BUTTON_GPIO_CLK_ENABLE()         __GPIOC_CLK_ENABLE()   
+#define KEY_BUTTON_GPIO_CLK_DISABLE()        __GPIOC_CLK_DISABLE()  
+#define KEY_BUTTON_EXTI_LINE                   GPIO_PIN_13
+#define KEY_BUTTON_EXTI_IRQn                   EXTI4_15_IRQn
+
+#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__)    (((__INDEX__) == 0) ? KEY_BUTTON_GPIO_CLK_ENABLE() : 0)
+#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__)   (((__INDEX__) == 0) ? KEY_BUTTON_GPIO_CLK_DISABLE() : 0)
+/**
+  * @}
+  */ 
+
+/** @addtogroup STM32L0XX_NUCLEO_LOW_LEVEL_BUS
+  * @{
+  */ 
+/*###################### SPI1 ###################################*/
+#define NUCLEO_SPIx                                 SPI1
+#define NUCLEO_SPIx_CLK_ENABLE()                  __SPI1_CLK_ENABLE()
+
+#define NUCLEO_SPIx_SCK_AF                          GPIO_AF0_SPI1
+#define NUCLEO_SPIx_SCK_GPIO_PORT                   GPIOA
+#define NUCLEO_SPIx_SCK_PIN                         GPIO_PIN_5
+#define NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE()         __GPIOA_CLK_ENABLE()
+#define NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE()        __GPIOA_CLK_DISABLE()
+
+#define NUCLEO_SPIx_MISO_MOSI_AF                    GPIO_AF0_SPI1
+#define NUCLEO_SPIx_MISO_MOSI_GPIO_PORT             GPIOA
+#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE()   __GPIOA_CLK_ENABLE()
+#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE()  __GPIOA_CLK_DISABLE()
+#define NUCLEO_SPIx_MISO_PIN                        GPIO_PIN_6
+#define NUCLEO_SPIx_MOSI_PIN                        GPIO_PIN_7
+/* Maximum Timeout values for flags waiting loops. These timeouts are not based
+   on accurate values, they just guarantee that the application will not remain
+   stuck if the SPI communication is corrupted.
+   You may modify these timeout values depending on CPU frequency and application
+   conditions (interrupts routines ...). */   
+#define NUCLEO_SPIx_TIMEOUT_MAX                   1000
+
+/** @addtogroup STM32L0XX_NUCLEO_LOW_LEVEL_COMPONENT
+  * @{
+  */
+
+/**
+  * @brief  SD Control Lines management
+  */
+#define SD_CS_LOW()       HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET)
+#define SD_CS_HIGH()      HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET)
+
+/**
+  * @brief  LCD Control Lines management
+  */
+#define LCD_CS_LOW()      HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET)
+#define LCD_CS_HIGH()     HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET)
+#define LCD_DC_LOW()      HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET)
+#define LCD_DC_HIGH()     HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET)
+     
+/**
+  * @brief  SD Control Interface pins
+  */
+#define SD_CS_PIN                                 GPIO_PIN_5
+#define SD_CS_GPIO_PORT                           GPIOB
+#define SD_CS_GPIO_CLK_ENABLE()                 __GPIOB_CLK_ENABLE()
+#define SD_CS_GPIO_CLK_DISABLE()                __GPIOB_CLK_DISABLE()
+
+/**
+  * @brief  LCD Control Interface pins
+  */
+#define LCD_CS_PIN                                 GPIO_PIN_6
+#define LCD_CS_GPIO_PORT                           GPIOB
+#define LCD_CS_GPIO_CLK_ENABLE()                 __GPIOB_CLK_ENABLE()
+#define LCD_CS_GPIO_CLK_DISABLE()                __GPIOB_CLK_DISABLE()
+    
+/**
+  * @brief  LCD Data/Command Interface pins
+  */
+#define LCD_DC_PIN                                 GPIO_PIN_9
+#define LCD_DC_GPIO_PORT                           GPIOA
+#define LCD_DC_GPIO_CLK_ENABLE()                 __GPIOA_CLK_ENABLE()
+#define LCD_DC_GPIO_CLK_DISABLE()                __GPIOA_CLK_DISABLE()
+
+/*##################### ADC1 ###################################*/
+/**
+  * @brief  ADC Interface pins
+  *         used to detect motion of Joystick available on Adafruit 1.8" TFT shield
+  */
+#define NUCLEO_ADCx                                 ADC1
+#define NUCLEO_ADCx_CLK_ENABLE()                  __ADC1_CLK_ENABLE()
+
+#define NUCLEO_ADCx_GPIO_PORT                       GPIOB
+#define NUCLEO_ADCx_GPIO_PIN                        GPIO_PIN_0
+#define NUCLEO_ADCx_GPIO_CLK_ENABLE()             __GPIOB_CLK_ENABLE()
+#define NUCLEO_ADCx_GPIO_CLK_DISABLE()            __GPIOB_CLK_ENABLE()
+
+/** @defgroup STM32L0XX_NUCLEO_LOW_LEVEL_Exported_Macros 
+  * @{
+  */  
+/**
+  * @}
+  */ 
+
+
+/** @defgroup STM32L0XX_NUCLEO_LOW_LEVEL_Exported_Functions 
+  * @{
+  */
+uint32_t         BSP_GetVersion(void);  
+void             BSP_LED_Init(Led_TypeDef Led);
+void             BSP_LED_On(Led_TypeDef Led);
+void             BSP_LED_Off(Led_TypeDef Led);
+void             BSP_LED_Toggle(Led_TypeDef Led);                 
+void             BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode);
+uint32_t         BSP_PB_GetState(Button_TypeDef Button);                
+uint8_t          BSP_JOY_Init(void);
+JOYState_TypeDef BSP_JOY_GetState(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L0XX_NUCLEO_H */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+    
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+