Revision 3:2e12e0cd1f26, committed 2018-06-01

Comitter:

xihan94

Date:

Fri Jun 01 23:23:08 2018 +0000

Parent:

1:ad1b075585bc

Child:

4:8cee5929f4d8

Commit message:

Update

Changed in this revision

--- a/MAX30101.lib	Fri Jun 01 10:05:51 2018 +0000
+++ b/MAX30101.lib	Fri Jun 01 23:23:08 2018 +0000
@@ -1,1 +1,1 @@
-https://os.mbed.com/teams/MaximIntegrated/code/MAX30101/#e7a4b17cd918
+https://os.mbed.com/teams/MaximIntegrated/code/MAX30101/#85513b7480f5

--- a/main.cpp	Fri Jun 01 10:05:51 2018 +0000
+++ b/main.cpp	Fri Jun 01 23:23:08 2018 +0000
@@ -22,10 +22,10 @@
     
     MAX30101::InterruptBitField_u interruptStatus;
     hr.getInterruptStatus(interruptStatus);
-    printf("Interrupt Status: 0x%02x\r\n", interruptStatus.all);
+//    printf("Interrupt Status: 0x%02x\r\n", interruptStatus.all);
     
     if (interruptStatus.bits.pwr_rdy == 0x1) {
-        printf("Powered on\r\n");
+//        printf("Powered on\r\n");
         
         // Soft reset
         MAX30101::ModeConfiguration_u modeConf;
@@ -37,12 +37,12 @@
         // Configure FIFO
         MAX30101::FIFO_Configuration_u fifoConf;
         hr.getFIFOConfiguration(fifoConf);
-        pc.printf("FIFO Configuration: 0x%02x\r\n", fifoConf.all);
+//        pc.printf("FIFO Configuration: 0x%02x\r\n", fifoConf.all);
           
         // Set LED power
         hr.setLEDPulseAmplitude(MAX30101::LED1_PA, 0x0C);
         hr.setLEDPulseAmplitude(MAX30101::ProxModeLED_PA, 0x19);
-        pc.printf("LED set\r\n");
+//        pc.printf("LED set\r\n");
         
         MAX30101::SpO2Configuration_u spo2Conf;
         hr.getSpO2Configuration(spo2Conf);
@@ -50,7 +50,7 @@
         spo2Conf.bits.spo2_sr = MAX30101::SR_100_Hz;
         hr.setSpO2Configuration(spo2Conf);
         hr.getSpO2Configuration(spo2Conf);
-        pc.printf("SpO2 Configuration: 0x%02x\r\n", spo2Conf.all);
+//        pc.printf("SpO2 Configuration: 0x%02x\r\n", spo2Conf.all);
         
         // Proximity settings
         hr.setProxIntThreshold(0x14);
@@ -59,20 +59,20 @@
         modeConf.all = 0;
         modeConf.bits.mode = MAX30101::HeartRateMode;
         hr.setModeConfiguration(modeConf);
-        printf("Mode set\r\n");
+//        printf("Mode set\r\n");
     }
     
     if (interruptStatus.bits.prox_int == 0x1) {
-        printf("Proximity Triggered, entered HR Mode.");
+//        printf("Proximity Triggered, entered HR Mode.");
     }
     
     if (interruptStatus.bits.ppg_rdy == 0x1) {
-        printf("PPG Ready.\r\n");
+//        printf("PPG Ready.\r\n");
         mask_ppg = 1;
     }
     
     if (interruptStatus.bits.a_full == 0x1) {
-        printf("FIFO Almost Full.\r\n");
+//        printf("FIFO Almost Full.\r\n");
         uint8_t data[FIFO_DATA_MAX];
         uint16_t readBytes = 0;
         hr.readFIFO(MAX30101::OneLedChannel, data, readBytes);
@@ -100,7 +100,7 @@
 
 // main() runs in its own thread in the OS
 int main() {
-    printf("Hello world.\r\n");
+//    printf("Hello world.\r\n");
     
     t.start(callback(&evqueue, &EventQueue::dispatch_forever));