Nigel Leitzell / Mbed 2 deprecated SmartPipe_HVAC_Server_RX

This program utilizes the mcr20 Thread Shield on the FRDM-K64F MCU which is a two-part workspace (HVAC Server (RX)/Probe(TX)) to handle low temperature events read at the probe(s) to prevent pipes from freezing.

Dependencies:   fsl_phy_mcr20a fsl_smac mbed-rtos mbed

Fork of mcr20_wireless_uart by NXP

Diff: main.cpp

Revision:
19:71b793021c78
Parent:
18:b02fc0e53df8
Child:
23:6f13fea3cace
--- a/main.cpp	Fri Apr 03 05:23:33 2015 +0000
+++ b/main.cpp	Sat Apr 04 22:14:14 2015 +0000
@@ -1,6 +1,28 @@
 #include "mbed.h"
 #include "rtos.h"
 
+#include "SMAC_Interface.h"
+#include "SMAC_Config.h"
+
+static uint8_t mAppSer;
+static uint8_t timePassed;       
+#ifdef VERBOSE
+static bool_t bCCAFailed;
+static bool_t bACKFailed;
+#endif
+static bool_t bTxDone;
+static bool_t bRxDone;
+static bool_t evKeyPressed;
+static bool_t bTxInProgress;
+static uint8_t gau8TxDataBuffer[gMaxSmacSDULength_c  + sizeof(rxPacket_t)];  
+static txPacket_t *gAppTxPacket;
+static rxPacket_t *gAppRxPacket;
+static txContextConfig_t txConfigContext;
+
+void InitProject(void);
+extern smacErrors_t smacToAppMlmeSap(smacToAppMlmeMessage_t* pMsg, instanceId_t instance);
+extern smacErrors_t smacToAppMcpsSap(smacToAppDataMessage_t* pMsg, instanceId_t instance);
+
 DigitalOut led1(LED1);
 InterruptIn sw2(SW2);
 uint32_t button_pressed;
@@ -31,7 +53,23 @@
 {
     Thread thread(led_thread);
     thread2 = new Thread(button_thread);
+    
+    InitSmac();
+    Smac_RegisterSapHandlers((SMAC_APP_MCPS_SapHandler_t)smacToAppMcpsSap,(SMAC_APP_MLME_SapHandler_t)smacToAppMlmeSap,0);
+    
+    InitProject();
 
+    gAppTxPacket = (txPacket_t*)gau8TxDataBuffer;   //Map TX packet to buffer
+    gAppRxPacket = (rxPacket_t*)MEM_BufferAlloc(gMaxSmacSDULength_c + sizeof(rxPacket_t));
+
+    SMACFillHeader(&(gAppTxPacket->smacHeader), gDefaultAddress_c);                  
+    
+    (void)MLMEPAOutputAdjust(gDefaultOutputPower_c);
+    (void)MLMESetChannelRequest(gDefaultChannelNumber_c);         
+    (void)MLMEConfigureTxContext(&txConfigContext);
+    gAppRxPacket->u8MaxDataLength = gMaxSmacSDULength_c;
+    (void)MLMERXEnableRequest(gAppRxPacket, 0);
+    
     button_pressed = 0;
     sw2.fall(&sw2_press);
     while (true) {
@@ -41,3 +79,75 @@
         button_pressed = 0;
     }
 }
+
+smacErrors_t smacToAppMlmeSap(smacToAppMlmeMessage_t* pMsg, instanceId_t instance)
+{
+  switch(pMsg->msgType)
+  {
+  case gMlmeEdCnf_c:
+    printf("EdCnf: \r\n");
+     //(void)OSA_EventSet(&gTaskEvent, gMlme_EdCnf_EVENT_c);
+    break;
+  case gMlmeCcaCnf_c:
+    printf("CcaCnf: \r\n");
+    //(void)OSA_EventSet(&gTaskEvent, gMlme_CcaCnf_EVENT_c);
+    break;
+  case gMlmeTimeoutInd_c:
+    printf("MlmeTimeoutInd: \r\n");
+     //(void)OSA_EventSet(&gTaskEvent, gMlme_TimeoutInd_EVENT_c);
+     break;
+  default:
+    break;
+  }
+  MEM_BufferFree(pMsg);
+  return gErrorNoError_c;
+}
+
+//(Data) Sap handler for managing data confirm and data indication
+smacErrors_t smacToAppMcpsSap(smacToAppDataMessage_t* pMsg, instanceId_t instance)
+{
+  switch(pMsg->msgType)
+  {
+  case gMcpsDataInd_c:
+    if(pMsg->msgData.dataInd.pRxPacket->rxStatus == rxSuccessStatus_c)
+    {
+      printf("McpsDataInd: \r\n");
+      //(void)OSA_EventSet(&gTaskEvent, gMcps_Ind_EVENT_c);
+    }
+    break;
+  case gMcpsDataCnf_c:
+#ifdef VERBOSE
+    if(pMsg->msgData.dataCnf.status == gErrorChannelBusy_c)
+    {
+      bCCAFailed = TRUE;
+    }
+    if(pMsg->msgData.dataCnf.status == gErrorNoAck_c)
+    {
+      bACKFailed = TRUE;
+    }
+#endif
+    printf("McpsDataCnf: \r\n");
+    //(void)OSA_EventSet(&gTaskEvent, gMcps_Cnf_EVENT_c);
+    break;
+  default:
+    break;
+  }
+  MEM_BufferFree(pMsg);
+  return gErrorNoError_c;
+}
+
+void InitProject(void)
+{   
+  /*Global Data init*/
+#ifdef VERBOSE
+  bACKFailed                        = FALSE;
+  bCCAFailed                        = FALSE;
+#endif
+  bTxInProgress                     = FALSE;
+  bTxDone                           = FALSE;
+  evKeyPressed                      = FALSE;
+  txConfigContext.autoAck           = FALSE;
+  txConfigContext.ccaBeforeTx       = FALSE;
+  txConfigContext.retryCountAckFail = 0;
+  txConfigContext.retryCountCCAFail = 0;
+}
\ No newline at end of file