Guillermo Stedile
Forked para SNOCC
Diff: RA8875.cpp
- Revision:
- 79:544eb4964795
- Parent:
- 78:faf49c381591
- Child:
- 80:cc4fab58179c
--- a/RA8875.cpp Sun Dec 28 03:14:35 2014 +0000
+++ b/RA8875.cpp Sun Dec 28 19:55:16 2014 +0000
@@ -70,13 +70,23 @@
#define POLLWAITuSec 10
// Private RawKeyMap for the Keyboard interface
-static const uint8_t KeyMap[22] = {
+static const uint8_t DefaultKeyMap[22] = {
0,
1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
11, 12, 13, 14, 15, 16, 17, 18, 19, 20,
255
};
+static const char * ErrMessages[] = {
+ "noerror", ///< no errors, command completed successfully
+ "bad_parameter", ///< one or more parameters are invalid
+ "file_not_found", ///< specified file could not be found
+ "not_bmp_format", ///< file is not a .bmp file
+ "not_ico_format", ///< file is not a .ico file
+ "not_supported_format", ///< file format is not yet supported
+ "image_too_big", ///< image is too large for the screen
+ "not_enough_ram", ///< could not allocate ram for scanline
+};
RA8875::RA8875(PinName mosi, PinName miso, PinName sclk, PinName csel, PinName reset, const char *name)
: GraphicsDisplay(name)
@@ -84,29 +94,103 @@
, cs(csel)
, res(reset)
{
- font = NULL; // no external font, use internal.
- select(false); // deselect the display
- frequency(RA8875_DEFAULT_SPI_FREQ); // data rate
- Reset();
- Power(true);
- Backlight_u8(255);
- pKeyMap = KeyMap;
-#ifdef PERF_METRICS
- performance.start();
- ClearPerformance();
-#endif
}
-
//RA8875::~RA8875()
//{
//}
+RetCode_t RA8875::init(bool poweron, int width, int height, int color_bpp)
+{
+ INFO("init(%d,%d,%d,%d)", poweron, width, height, color_bpp);
+ font = NULL; // no external font, use internal.
+ pKeyMap = DefaultKeyMap; // set default key map
+ _select(false); // deselect the display
+ frequency(RA8875_DEFAULT_SPI_FREQ); // data rate
+ Reset();
+ WriteCommand(0x88, 0x0B); // PLLC1 - Phase Lock Loop registers
+ wait_ms(1);
+ WriteCommand(0x89, 0x02);
+ wait_ms(1);
+
+ // System Config Register (SYSR)
+ if (color_bpp == 16) {
+ WriteCommand(0x10, 0x0C); // 16-bpp (65K colors) color depth, 8-bit interface
+ } else { // color_bpp == 8
+ WriteCommand(0x10, 0x00); // 8-bpp (256 colors)
+ }
+ // Pixel Clock Setting Register (PCSR)
+ WriteCommand(0x04, 0x82); // PDAT on PCLK falling edge, PCLK = 4 x System Clock
+ wait_ms(1);
+
+ // Horizontal Settings
+ WriteCommand(0x14, width/8 - 1); //HDWR//Horizontal Display Width Setting Bit[6:0]
+ WriteCommand(0x15, 0x02); //HNDFCR//Horizontal Non-Display Period fine tune Bit[3:0]
+ WriteCommand(0x16, 0x03); //HNDR//Horizontal Non-Display Period Bit[4:0]
+ WriteCommand(0x17, 0x01); //HSTR//HSYNC Start Position[4:0]
+ WriteCommand(0x18, 0x03); //HPWR//HSYNC Polarity ,The period width of HSYNC.
+
+ // Vertical Settings
+ WriteCommand(0x19, (height-1)&0xFF); //VDHR0 //Vertical Display Height Bit [7:0]
+ WriteCommand(0x1a, (height-1)>>8); //VDHR1 //Vertical Display Height Bit [8]
+ WriteCommand(0x1b, 0x0F); //VNDR0 //Vertical Non-Display Period Bit [7:0]
+ WriteCommand(0x1c, 0x00); //VNDR1 //Vertical Non-Display Period Bit [8]
+ WriteCommand(0x1d, 0x0e); //VSTR0 //VSYNC Start Position[7:0]
+ WriteCommand(0x1e, 0x06); //VSTR1 //VSYNC Start Position[8]
+ WriteCommand(0x1f, 0x01); //VPWR //VSYNC Polarity ,VSYNC Pulse Width[6:0]
+
+ if (width >= 800 && height >= 480 && color_bpp > 8) {
+ WriteCommand(0x20, 0x00); // DPCR - 1-layer mode when the resolution is too high
+ } else {
+ WriteCommand(0x20, 0x80); // DPCR - 2-layer mode
+ }
+
+ // Set display image to Blue on Black as default
+ window(0,0, width, height); // Initialize to full screen
+ SetTextCursorControl();
+ foreground(Blue);
+ background(Black);
+ cls(3);
+
+ Power(poweron);
+ if (poweron)
+ Backlight_u8(255);
+#ifdef PERF_METRICS
+ performance.start();
+ ClearPerformance();
+#endif
+ return noerror;
+}
+
+
+RetCode_t RA8875::Reset(void)
+{
+ RetCode_t ret;
+
+ ret = WriteCommand(0x01, 0x01); // Apply Display Off, Reset
+ wait_ms(2); // no idea if I need to wait, or how long
+ if (ret == noerror) {
+ ret = WriteCommand(0x01, 0x00); // Display off, Remove reset
+ wait_ms(2); // no idea if I need to wait, or how long
+ }
+ return ret;
+}
+
+
+const char * RA8875::GetErrorMessage(RetCode_t code)
+{
+ if (code >= LastErrCode)
+ code = bad_parameter;
+ return ErrMessages[code];
+}
+
+
uint16_t RA8875::GetDrawingLayer(void)
{
return (ReadCommand(0x41) & 0x01);
}
+
RetCode_t RA8875::SelectDrawingLayer(uint16_t layer)
{
unsigned char mwcr1 = ReadCommand(0x41) & ~0x01; // retain all but the currently selected layer
@@ -152,6 +236,7 @@
return noerror;
}
+
color_t RA8875::GetBackgroundTransparencyColor(void)
{
RGBQUAD q;
@@ -186,20 +271,23 @@
return WriteCommand(0xF0, value); // INT
}
+
RetCode_t RA8875::SetKeyMap(const uint8_t * CodeList)
{
pKeyMap = CodeList;
return noerror;
}
+
bool RA8875::readable(void)
{
return (ReadCommand(0xF1) & 0x10); // check KS status - true if kbhit
}
+
uint8_t RA8875::getc(void)
{
- //#define GETC_DEV
+ //#define GETC_DEV // for development
#ifdef GETC_DEV
uint8_t keyCode1, keyCode2;
#endif
@@ -270,6 +358,7 @@
return key;
}
+
#ifdef PERF_METRICS
void RA8875::ClearPerformance()
{
@@ -278,6 +367,7 @@
idletime_usec = 0;
}
+
void RA8875::RegisterPerformance(method_e method)
{
unsigned long elapsed = performance.read_us();
@@ -286,11 +376,13 @@
metrics[method] = elapsed;
}
+
void RA8875::CountIdleTime(uint32_t t)
{
idletime_usec += t;
}
+
void RA8875::ReportPerformance(Serial & pc)
{
pc.printf("\r\nPerformance Metrics\r\n");
@@ -310,13 +402,13 @@
#else
// This should be a little faster, but doesn't work...
INFO("WriteCommandW(%02X, %04X)", command, data);
- select(true);
- spiwrite(0x80);
- spiwrite(command);
- //spiwrite(0x00); // dummy
- spiwrite(data & 0xFF);
- spiwrite(data >> 8);
- select(false);
+ _select(true);
+ _spiwrite(0x80);
+ _spiwrite(command);
+ //_spiwrite(0x00); // dummy
+ _spiwrite(data & 0xFF);
+ _spiwrite(data >> 8);
+ _select(false);
#endif
return noerror;
}
@@ -324,35 +416,35 @@
RetCode_t RA8875::WriteCommand(unsigned char command, unsigned int data)
{
- select(true);
- spiwrite(0x80); // cmd: write command
- spiwrite(command);
+ _select(true);
+ _spiwrite(0x80); // cmd: write command
+ _spiwrite(command);
if (data <= 0xFF) { // only if in the valid range
- spiwrite(0x00);
- spiwrite(data);
+ _spiwrite(0x00);
+ _spiwrite(data);
}
- select(false);
+ _select(false);
return noerror;
}
RetCode_t RA8875::WriteDataW(uint16_t data)
{
- select(true);
- spiwrite(0x00); // cmd: write data
- spiwrite(data & 0xFF);
- spiwrite(data >> 8);
- select(false);
+ _select(true);
+ _spiwrite(0x00); // cmd: write data
+ _spiwrite(data & 0xFF);
+ _spiwrite(data >> 8);
+ _select(false);
return noerror;
}
RetCode_t RA8875::WriteData(unsigned char data)
{
- select(true);
- spiwrite(0x00);
- spiwrite(data);
- select(false);
+ _select(true);
+ _spiwrite(0x00);
+ _spiwrite(data);
+ _select(false);
return noerror;
}
@@ -368,10 +460,10 @@
{
unsigned char data;
- select(true);
- spiwrite(0x40);
- data = spiread();
- select(false);
+ _select(true);
+ _spiwrite(0x40);
+ data = _spiread();
+ _select(false);
return data;
}
@@ -380,11 +472,11 @@
{
uint16_t data;
- select(true);
- spiwrite(0x40);
- data = spiread();
- data |= (spiread() << 8);
- select(false);
+ _select(true);
+ _spiwrite(0x40);
+ data = _spiread();
+ data |= (_spiread() << 8);
+ _select(false);
return data;
}
@@ -393,13 +485,14 @@
{
unsigned char data;
- select(true);
- spiwrite(0xC0); // These two bits are for the special "Status Read" [STSR]
- data = spiread();
- select(false);
+ _select(true);
+ _spiwrite(0xC0); // These two bits are for the special "Status Read" [STSR]
+ data = _spiread();
+ _select(false);
return data;
}
+
/// @todo add a timeout and return false, but how long
/// to wait since some operations can be very long.
bool RA8875::_WaitWhileBusy(uint8_t mask)
@@ -416,6 +509,7 @@
return false;
}
+
/// @todo add a timeout and return false, but how long
/// to wait since some operations can be very long.
bool RA8875::_WaitWhileReg(uint8_t reg, uint8_t mask)
@@ -433,7 +527,6 @@
}
-
dim_t RA8875::fontwidth(void)
{
if (font == NULL)
@@ -670,10 +763,10 @@
WriteCommandW(0x2C, y);
} else {
WriteCommand(0x02); // RA8875 Internal Fonts
- select(true);
+ _select(true);
WriteData(c);
_WaitWhileBusy(0x80);
- select(false);
+ _select(false);
}
}
return c;
@@ -725,13 +818,13 @@
}
#else
WriteCommand(0x02);
- select(true);
+ _select(true);
while (*string != '\0') {
WriteData(*string);
++string;
_WaitWhileBusy(0x80);
}
- select(false);
+ _select(false);
#endif
}
if (font)
@@ -848,14 +941,14 @@
WriteCommand(0x40,0x00); // Graphics write mode
SetGraphicsCursor(x, y);
WriteCommand(0x02);
- select(true);
- spiwrite(0x00); // Cmd: write data
+ _select(true);
+ _spiwrite(0x00); // Cmd: write data
while (count--) {
- spiwrite(*p >> 8);
- spiwrite(*p & 0xFF);
+ _spiwrite(*p >> 8);
+ _spiwrite(*p & 0xFF);
p++;
}
- select(false);
+ _select(false);
REGISTERPERFORMANCE(PRF_PIXELSTREAM);
return(noerror);
}
@@ -870,12 +963,12 @@
WriteCommand(0x40,0x00); // Graphics write mode
SetGraphicsCursorRead(x, y);
WriteCommand(0x02);
- select(true);
- spiwrite(0x40); // Cmd: read data
- spiwrite(0x00); // dummy read
- pixel = spiread();
- pixel |= (spiread() << 8);
- select(false);
+ _select(true);
+ _spiwrite(0x40); // Cmd: read data
+ _spiwrite(0x00); // dummy read
+ pixel = _spiread();
+ pixel |= (_spiread() << 8);
+ _select(false);
REGISTERPERFORMANCE(PRF_READPIXEL);
return pixel;
}
@@ -890,15 +983,15 @@
WriteCommand(0x40,0x00); // Graphics write mode
SetGraphicsCursorRead(x, y);
WriteCommand(0x02);
- select(true);
- spiwrite(0x40); // Cmd: read data
- spiwrite(0x00); // dummy read
+ _select(true);
+ _spiwrite(0x40); // Cmd: read data
+ _spiwrite(0x00); // dummy read
while (count--) {
- pixel = spiread();
- pixel |= (spiread() << 8);
+ pixel = _spiread();
+ pixel |= (_spiread() << 8);
*p++ = pixel;
}
- select(false);
+ _select(false);
REGISTERPERFORMANCE(PRF_READPIXELSTREAM);
return noerror;
}
@@ -1188,17 +1281,6 @@
}
-RetCode_t RA8875::Reset(void)
-{
- WriteCommand(0x01, 0x01); // Apply Display Off, Reset
- wait_ms(2); // no idea if I need to wait, or how long
- WriteCommand(0x01, 0x00); // Display off, Remove reset
- wait_ms(2); // no idea if I need to wait, or how long
- init(RA8875_DISPLAY_WIDTH, RA8875_DISPLAY_HEIGHT, RA8875_COLORDEPTH_BPP);
- return noerror;
-}
-
-
RetCode_t RA8875::Backlight_u8(unsigned char brightness)
{
static bool is_enabled = false;
@@ -1327,7 +1409,7 @@
///////////////////////////////////////////////////////////////
// Private functions
-unsigned char RA8875::spiwrite(unsigned char data)
+unsigned char RA8875::_spiwrite(unsigned char data)
{
unsigned char retval;
@@ -1338,7 +1420,7 @@
}
-unsigned char RA8875::spiread(void)
+unsigned char RA8875::_spiread(void)
{
unsigned char retval;
unsigned char data = 0;
@@ -1350,65 +1432,13 @@
}
-RetCode_t RA8875::select(bool chipsel)
+RetCode_t RA8875::_select(bool chipsel)
{
cs = (chipsel == true) ? 0 : 1;
return noerror;
}
-RetCode_t RA8875::init(int width, int height, int color_bpp)
-{
- Backlight_u8(0);
- WriteCommand(0x88, 0x0B); // PLLC1 - Phase Lock Loop registers
- wait_ms(1);
- WriteCommand(0x89, 0x02);
- wait_ms(1);
-
- // System Config Register (SYSR)
- if (color_bpp == 16) {
- WriteCommand(0x10, 0x0C); // 16-bpp (65K colors) color depth, 8-bit interface
- } else { // color_bpp == 8
- WriteCommand(0x10, 0x00); // 8-bpp (256 colors)
- }
- // Pixel Clock Setting Register (PCSR)
- WriteCommand(0x04, 0x82); // PDAT on PCLK falling edge, PCLK = 4 x System Clock
- wait_ms(1);
-
- // Horizontal Settings
- WriteCommand(0x14, width/8 - 1); //HDWR//Horizontal Display Width Setting Bit[6:0]
- WriteCommand(0x15, 0x02); //HNDFCR//Horizontal Non-Display Period fine tune Bit[3:0]
- WriteCommand(0x16, 0x03); //HNDR//Horizontal Non-Display Period Bit[4:0]
- WriteCommand(0x17, 0x01); //HSTR//HSYNC Start Position[4:0]
- WriteCommand(0x18, 0x03); //HPWR//HSYNC Polarity ,The period width of HSYNC.
-
- // Vertical Settings
- WriteCommand(0x19, (height-1)&0xFF); //VDHR0 //Vertical Display Height Bit [7:0]
- WriteCommand(0x1a, (height-1)>>8); //VDHR1 //Vertical Display Height Bit [8]
- WriteCommand(0x1b, 0x0F); //VNDR0 //Vertical Non-Display Period Bit [7:0]
- WriteCommand(0x1c, 0x00); //VNDR1 //Vertical Non-Display Period Bit [8]
- WriteCommand(0x1d, 0x0e); //VSTR0 //VSYNC Start Position[7:0]
- WriteCommand(0x1e, 0x06); //VSTR1 //VSYNC Start Position[8]
- WriteCommand(0x1f, 0x01); //VPWR //VSYNC Polarity ,VSYNC Pulse Width[6:0]
-
- if (width >= 800 && height >= 480 && color_bpp > 8) {
- WriteCommand(0x20, 0x00); // DPCR - 1-layer mode when the resolution is too high
- } else {
- WriteCommand(0x20, 0x80); // DPCR - 2-layer mode
- }
-
- // Set display image to Blue on Black as default
- window(0,0, width, height); // Initialize to full screen
- SetTextCursorControl();
- foreground(Blue);
- background(Black);
- SelectDrawingLayer(1);
- cls();
- SelectDrawingLayer(0);
- cls();
- return noerror;
-}
-
RetCode_t RA8875::PrintScreen(uint16_t layer, loc_t x, loc_t y, dim_t w, dim_t h, const char *Name_BMP)
{
#if 1
@@ -1426,6 +1456,7 @@
#endif
}
+
RetCode_t RA8875::PrintScreen(loc_t x, loc_t y, dim_t w, dim_t h, const char *Name_BMP)
{
BITMAPFILEHEADER BMP_Header;
@@ -2211,7 +2242,7 @@
display.printf(" (%3d,%3d) => ", pTest[i].x, pTest[i].y);
display.line(pTest[i].x-10, pTest[i].y, pTest[i].x+10, pTest[i].y, White);
display.line(pTest[i].x, pTest[i].y-10, pTest[i].x, pTest[i].y+10, White);
- while (!display.TouchPanelRead(&x, &y))
+ while (!display.TouchPanelA2DFiltered(&x, &y))
wait_ms(20);
pSample[i].x = x;
pSample[i].y = y;
@@ -2219,7 +2250,7 @@
display.line(pTest[i].x, pTest[i].y-10, pTest[i].x, pTest[i].y+10, Black);
display.foreground(Blue);
display.printf(" (%4d,%4d)\r\n", x,y);
- while (display.TouchPanelRead(&x, &y))
+ while (display.TouchPanelA2DFiltered(&x, &y))
wait_ms(20);
wait(2);
}
@@ -2244,7 +2275,7 @@
t.start();
do {
point_t point = {0, 0};
- if (display.TouchPanelPoint(&point)) {
+ if (display.TouchPanelReadable(&point)) {
display.pixel(point.x, point.y, Red);
}
} while (t.read_ms() < 30000);
@@ -2415,4 +2446,4 @@
}
}
-#endif // TESTENABLE
\ No newline at end of file
+#endif // TESTENABLE