USBHost library

Dependencies:   FATFileSystem

Dependents:   Project RoboticsCatAndMouse_HumanDriver RoboticsCatAndMouse_AutonomousDriver

Fork of USBHost by mbed official

Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers USBHostHub.cpp Source File

USBHostHub.cpp

00001 /* mbed USBHost Library
00002  * Copyright (c) 2006-2013 ARM Limited
00003  *
00004  * Licensed under the Apache License, Version 2.0 (the "License");
00005  * you may not use this file except in compliance with the License.
00006  * You may obtain a copy of the License at
00007  *
00008  *     http://www.apache.org/licenses/LICENSE-2.0
00009  *
00010  * Unless required by applicable law or agreed to in writing, software
00011  * distributed under the License is distributed on an "AS IS" BASIS,
00012  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
00013  * See the License for the specific language governing permissions and
00014  * limitations under the License.
00015  */
00016 
00017 #include "USBHostHub.h"
00018 
00019 #if MAX_HUB_NB
00020 
00021 #include "USBHost.h"
00022 #include "dbg.h"
00023 
00024 #define GET_STATUS 0x00
00025 #define CLEAR_FEATURE 0x01
00026 #define GET_STATE 0x02
00027 #define SET_FEATURE 0x03
00028 #define GET_DESCRIPTOR 0x06
00029 
00030 #define PORT_CONNECTION_FEATURE     (0x00)
00031 #define PORT_ENABLE_FEATURE         (0x01)
00032 #define PORT_RESET_FEATURE          (0x04)
00033 #define PORT_POWER_FEATURE          (0x08)
00034 
00035 #define C_PORT_CONNECTION_FEATURE     (16)
00036 #define C_PORT_ENABLE_FEATURE         (17)
00037 #define C_PORT_RESET_FEATURE          (20)
00038 
00039 #define PORT_CONNECTION   (1 << 0)
00040 #define PORT_ENABLE       (1 << 1)
00041 #define PORT_SUSPEND      (1 << 2)
00042 #define PORT_OVER_CURRENT (1 << 3)
00043 #define PORT_RESET        (1 << 4)
00044 #define PORT_POWER        (1 << 8)
00045 #define PORT_LOW_SPEED    (1 << 9)
00046 
00047 #define C_PORT_CONNECTION   (1 << 16)
00048 #define C_PORT_ENABLE       (1 << 17)
00049 #define C_PORT_SUSPEND      (1 << 18)
00050 #define C_PORT_OVER_CURRENT (1 << 19)
00051 #define C_PORT_RESET        (1 << 20)
00052 
00053 USBHostHub::USBHostHub() {
00054     host = NULL;
00055     init();
00056 }
00057 
00058 void USBHostHub::init() {
00059     dev_connected = false;
00060     dev = NULL;
00061     int_in = NULL;
00062     dev_connected = false;
00063     hub_intf = -1;
00064     hub_device_found = false;
00065     nb_port = 0;
00066     hub_characteristics = 0;
00067     
00068     for (int i = 0; i < MAX_HUB_PORT; i++) {
00069         device_children[i] = NULL;
00070     }
00071 }
00072 
00073 void USBHostHub::setHost(USBHost * host_) {
00074     host = host_;
00075 }
00076 
00077 bool USBHostHub::connected()
00078 {
00079     return dev_connected;
00080 }
00081 
00082 bool USBHostHub::connect(USBDeviceConnected * dev)
00083 {   
00084     if (dev_connected) {
00085         return true;
00086     }
00087     
00088     if(host->enumerate(dev, this)) {
00089         init();
00090         return false;
00091     }
00092     
00093     if (hub_device_found) {
00094         this->dev = dev;
00095     
00096         int_in = dev->getEndpoint(hub_intf, INTERRUPT_ENDPOINT, IN);
00097         
00098         if (!int_in) {
00099             init();
00100             return false;
00101         }
00102         
00103         USB_INFO("New HUB: VID:%04x PID:%04x [dev: %p - intf: %d]", dev->getVid(), dev->getPid(), dev, hub_intf);
00104         dev->setName("Hub", hub_intf);
00105         host->registerDriver(dev, hub_intf, this, &USBHostHub::disconnect);
00106         
00107         int_in->attach(this, &USBHostHub::rxHandler);
00108         
00109         // get HUB descriptor
00110         host->controlRead(  dev, 
00111                             USB_DEVICE_TO_HOST | USB_REQUEST_TYPE_CLASS,
00112                             GET_DESCRIPTOR,
00113                             0x29 << 8, 0, buf, sizeof(HubDescriptor));
00114         nb_port = buf[2];
00115         hub_characteristics = buf[3];
00116         
00117         USB_DBG("Hub has %d port", nb_port);
00118         
00119         for (uint8_t j = 1; j <= nb_port; j++) {
00120             setPortFeature(PORT_POWER_FEATURE, j);
00121         }
00122         wait_ms(buf[5]*2);
00123         
00124         host->interruptRead(dev, int_in, buf, 1, false);
00125         dev_connected = true;
00126         return true;
00127     }
00128     
00129     return false;
00130 }
00131 
00132 void USBHostHub::disconnect() {
00133     init();
00134 }
00135 
00136 /*virtual*/ void USBHostHub::setVidPid(uint16_t vid, uint16_t pid)
00137 {
00138     // we don't check VID/PID for MSD driver
00139 }
00140 
00141 /*virtual*/ bool USBHostHub::parseInterface(uint8_t intf_nb, uint8_t intf_class, uint8_t intf_subclass, uint8_t intf_protocol) //Must return true if the interface should be parsed
00142 {
00143     if ((hub_intf == -1) &&
00144         (intf_class == HUB_CLASS) &&
00145         (intf_subclass == 0) &&
00146         (intf_protocol == 0)) {
00147         hub_intf = intf_nb;
00148         return true;
00149     }
00150     return false;
00151 }
00152 
00153 /*virtual*/ bool USBHostHub::useEndpoint(uint8_t intf_nb, ENDPOINT_TYPE type, ENDPOINT_DIRECTION dir) //Must return true if the endpoint will be used
00154 {
00155     if (intf_nb == hub_intf) {
00156         if ((type == INTERRUPT_ENDPOINT) && (dir == IN)) {
00157             hub_device_found = true;
00158             return true;
00159         }
00160     }
00161     return false;
00162 }
00163 
00164 void USBHostHub::deviceConnected(USBDeviceConnected * dev) {
00165     device_children[dev->getPort() - 1] = dev;
00166 }
00167 
00168 void USBHostHub::deviceDisconnected(USBDeviceConnected * dev) {
00169     device_children[dev->getPort() - 1] = NULL;
00170 }
00171 
00172 void USBHostHub::hubDisconnected() {
00173     for (uint8_t i = 0; i < MAX_HUB_PORT; i++) {
00174         if (device_children[i] != NULL) {
00175             host->freeDevice(device_children[i]);
00176         }
00177     }
00178 }
00179 
00180 void USBHostHub::rxHandler() {
00181     uint32_t status;
00182     if (int_in) {
00183         if (int_in->getState() == USB_TYPE_IDLE) {
00184             for (int port = 1; port <= nb_port; port++) {
00185                 status = getPortStatus(port);
00186                 USB_DBG("[hub handler hub: %d] status port %d [hub: %p]: 0x%X", dev->getHub(), port, dev, status);
00187                 
00188                 // if connection status has changed
00189                 if (status & C_PORT_CONNECTION) {
00190                     if (status & PORT_CONNECTION) {
00191                         USB_DBG("[hub handler hub: %d - port: %d] new device connected", dev->getHub(), port);
00192                         host->deviceConnected(dev->getHub() + 1, port, status & PORT_LOW_SPEED, this);
00193                     } else {
00194                         USB_DBG("[hub handler hub: %d - port: %d] device disconnected", dev->getHub(), port);
00195                         host->deviceDisconnected(dev->getHub() + 1, port, this, 0);
00196                     }
00197                     
00198                     clearPortFeature(C_PORT_CONNECTION_FEATURE, port);
00199                 }
00200                 
00201                 if (status & C_PORT_RESET) {
00202                     clearPortFeature(C_PORT_RESET_FEATURE, port);
00203                 }
00204                 
00205                 if (status & C_PORT_ENABLE) {
00206                     clearPortFeature(C_PORT_ENABLE_FEATURE, port);
00207                 }
00208                 
00209                 if ((status & PORT_OVER_CURRENT)) {
00210                     USB_ERR("OVER CURRENT DETECTED\r\n");
00211                     clearPortFeature(PORT_OVER_CURRENT, port);
00212                     host->deviceDisconnected(dev->getHub() + 1, port, this, 0);
00213                 }
00214             }
00215         }
00216         host->interruptRead(dev, int_in, buf, 1, false);
00217     }
00218 }
00219 
00220 void USBHostHub::portReset(uint8_t port) {
00221     // reset port
00222     uint32_t status;
00223     USB_DBG("reset port %d on hub: %p [this: %p]", port, dev, this)
00224     setPortFeature(PORT_RESET_FEATURE, port);
00225     while(1) {
00226         status = getPortStatus(port);
00227         if (status & (PORT_ENABLE | PORT_RESET))
00228             break;
00229         if (status & PORT_OVER_CURRENT) {
00230             USB_ERR("OVER CURRENT DETECTED\r\n");
00231             clearPortFeature(PORT_OVER_CURRENT, port);
00232             host->deviceDisconnected(dev->getHub() + 1, port, this, 0);
00233             break;
00234         }
00235         Thread::wait(10);
00236     }
00237 }
00238 
00239 void USBHostHub::setPortFeature(uint32_t feature, uint8_t port) {
00240     host->controlWrite( dev,
00241                         USB_HOST_TO_DEVICE | USB_REQUEST_TYPE_CLASS | USB_RECIPIENT_INTERFACE | USB_RECIPIENT_ENDPOINT,
00242                         SET_FEATURE,
00243                         feature,
00244                         port,
00245                         NULL,
00246                         0);
00247 }
00248 
00249 void USBHostHub::clearPortFeature(uint32_t feature, uint8_t port) {
00250     host->controlWrite( dev,
00251                         USB_HOST_TO_DEVICE | USB_REQUEST_TYPE_CLASS | USB_RECIPIENT_INTERFACE | USB_RECIPIENT_ENDPOINT,
00252                         CLEAR_FEATURE,
00253                         feature,
00254                         port,
00255                         NULL,
00256                         0);
00257 }
00258 
00259 uint32_t USBHostHub::getPortStatus(uint8_t port) {
00260     uint32_t st;
00261     host->controlRead(  dev,
00262                         USB_DEVICE_TO_HOST | USB_REQUEST_TYPE_CLASS | USB_RECIPIENT_INTERFACE | USB_RECIPIENT_ENDPOINT,
00263                         GET_STATUS,
00264                         0,
00265                         port,
00266                         (uint8_t *)&st,
00267                         4);
00268     return st;
00269 }
00270 
00271 #endif