These are the examples provided for [[/users/frank26080115/libraries/LPC1700CMSIS_Lib/]] Note, the entire "program" is not compilable!
I2C/pca8581_polling/pca8581_test.c
- Committer:
- frank26080115
- Date:
- 2011-03-20
- Revision:
- 0:bf7b9fba3924
File content as of revision 0:bf7b9fba3924:
/***********************************************************************//** * @file pca8581_test.c * @purpose An example of I2C using polling mode to test the I2C driver. * Using EEPROM PCA8581 to transfer a number of data byte. * @version 2.0 * @date 21. May. 2010 * @author NXP MCU SW Application Team *--------------------------------------------------------------------- * Software that is described herein is for illustrative purposes only * which provides customers with programming information regarding the * products. This software is supplied "AS IS" without any warranties. * NXP Semiconductors assumes no responsibility or liability for the * use of the software, conveys no license or title under any patent, * copyright, or mask work right to the product. NXP Semiconductors * reserves the right to make changes in the software without * notification. NXP Semiconductors also make no representation or * warranty that such application will be suitable for the specified * use without further testing or modification. **********************************************************************/ #include "lpc17xx_i2c.h" #include "lpc17xx_libcfg.h" #include "lpc17xx_pinsel.h" #include "debug_frmwrk.h" /* Example group ----------------------------------------------------------- */ /** @defgroup I2C_pca8581_polling pca8581_polling * @ingroup I2C_Examples * @{ */ /************************** PRIVATE DEFINITIONS *************************/ /** Used I2C device definition, should be 0 or 2 */ #define USEDI2CDEV 0 /* Definition of internal register of EEPROM PCA8581 */ /* 7 bit address */ #define PCA8581_SLVADDR (0xA0>>1) #if (USEDI2CDEV == 0) #define I2CDEV LPC_I2C0 #elif (USEDI2CDEV == 2) #define I2CDEV LPC_I2C2 #else #error "I2C device not defined!" #endif /************************** PRIVATE VARIABLES *************************/ uint8_t menu1[] = "********************************************************************************\n\r" "Hello NXP Semiconductors \n\r" "I2C demo \n\r" "\t - MCU: LPC17xx \n\r" "\t - Core: ARM Cortex-M3 \n\r" "\t - Communicate via: UART0 - 115.2 kbps \n\r" " An example of I2C using polling mode to test the I2C driver \n\r" " EEPROM PCA8581 to transfer a number of data byte \n\r" "********************************************************************************\n\r"; uint8_t menu2[] = "Demo terminated! \n\r"; /* Data using for transferring to PCA8581 */ uint8_t pca8581_wrdat[] = { (0x01<<3), // Memory Address, data will be written at this address // This internal memory address should be 8-byte alignment 0x00, // Data 0 0x11, // Data 1 0x22, // Data 2 0x33, // Data 3 0x44, // Data 4 0x55, // Data 5 0x66, // Data 6 0x77, // Data 7 }; uint8_t pca8581_rddat[] = { // Don't use Memory address here, the Memory address to read // is the same as Memory Address to write. 0x00, // Data 0 0x00, // Data 1 0x00, // Data 2 0x00, // Data 3 0x00, // Data 4 0x00, // Data 5 0x00, // Data 6 0x00, // Data 7 }; /* Transmit setup */ I2C_M_SETUP_Type txsetup; /* Receive setup */ I2C_M_SETUP_Type rxsetup; /************************** PRIVATE FUNCTIONS *************************/ int32_t PCA8581_Write(void); int32_t PCA8581_Read(void); void print_menu(void); void Error_Loop(uint32_t ErrorCode); /*-------------------------PRIVATE FUNCTIONS------------------------------*/ /*********************************************************************//** * @brief Write a number of data byte into EEPROM PCA8581 * @param[in] None * @return 0: if success, otherwise (-1) returned. **********************************************************************/ int32_t PCA8581_Write(void) { txsetup.sl_addr7bit = PCA8581_SLVADDR; txsetup.tx_data = pca8581_wrdat; txsetup.tx_length = sizeof(pca8581_wrdat); txsetup.rx_data = NULL; txsetup.rx_length = 0; txsetup.retransmissions_max = 3; if (I2C_MasterTransferData(I2CDEV, &txsetup, I2C_TRANSFER_POLLING) == SUCCESS){ return (0); } else { return (-1); } } /*********************************************************************//** * @brief Read a number of data byte from EEPROM PCA8581 * @param[in] None * @return 0: if success, otherwise (-1) returned. **********************************************************************/ int32_t PCA8581_Read(void) { rxsetup.sl_addr7bit = PCA8581_SLVADDR; rxsetup.tx_data = pca8581_wrdat; // Get address to read at writing address rxsetup.tx_length = 1; rxsetup.rx_data = pca8581_rddat; rxsetup.rx_length = sizeof(pca8581_rddat); rxsetup.retransmissions_max = 3; if (I2C_MasterTransferData(I2CDEV, &rxsetup, I2C_TRANSFER_POLLING) == SUCCESS){ return (0); } else { return (-1); } } /*********************************************************************//** * @brief Print Welcome menu * @param[in] none * @return None **********************************************************************/ void print_menu(void) { _DBG_(menu1); } /*********************************************************************//** * @brief A subroutine that will be called if there's any error * on I2C operation * @param[in] ErrorCode Error Code Input * @return None **********************************************************************/ void Error_Loop(uint32_t ErrorCode) { uint32_t test; // for testing purpose test = ErrorCode; /* * Insert your code here... */ while(1); } /*-------------------------MAIN FUNCTION------------------------------*/ /*********************************************************************//** * @brief c_entry: Main program body * @param[in] None * @return int **********************************************************************/ int c_entry(void) { PINSEL_CFG_Type PinCfg; uint32_t tmp; uint8_t *dp, *sp; /* Initialize debug via UART0 * 115200bps * 8 data bit * No parity * 1 stop bit * No flow control */ debug_frmwrk_init(); // print welcome screen print_menu(); /* * Init I2C pin connect */ PinCfg.OpenDrain = 0; PinCfg.Pinmode = 0; #if (USEDI2CDEV == 0) PinCfg.Funcnum = 1; PinCfg.Pinnum = 27; PinCfg.Portnum = 0; PINSEL_ConfigPin(&PinCfg); PinCfg.Pinnum = 28; PINSEL_ConfigPin(&PinCfg); #elif (USEDI2CDEV == 2) PinCfg.Funcnum = 2; PinCfg.Pinnum = 10; PinCfg.Portnum = 0; PINSEL_ConfigPin(&PinCfg); PinCfg.Pinnum = 11; PINSEL_ConfigPin(&PinCfg); #endif /* I2C block ------------------------------------------------------------------- */ // Initialize I2C peripheral I2C_Init(I2CDEV, 200000); /* Enable I2C1 operation */ I2C_Cmd(I2CDEV, ENABLE); /* Transmit data ---------------------------------------------------------- */ _DBG_("Sending..."); if (PCA8581_Write() == (-1)){ _DBG_("Error while sending data"); Error_Loop(txsetup.status); } _DBG_("Complete!"); // wait for a while for (tmp = 0x100000; tmp; tmp--); /* Receive data ---------------------------------------------------------- */ _DBG_("Reading..."); if (PCA8581_Read() == (-1)){ _DBG_("Error while reading data"); Error_Loop(rxsetup.status); } _DBG_("Complete!"); // Verify data dp = pca8581_rddat; sp = pca8581_wrdat; sp += 1; // Offset +1 for (tmp = sizeof(pca8581_rddat); tmp; tmp--){ if (*dp++ != *sp++){ _DBG_("Verify Data error!"); break; } } tmp++; /* Loop forever */ while(1); return 1; } /* With ARM and GHS toolsets, the entry point is main() - this will allow the linker to generate wrapper code to setup stacks, allocate heap area, and initialize and copy code and data segments. For GNU toolsets, the entry point is through __start() in the crt0_gnu.asm file, and that startup code will setup stacks and data */ int main(void) { return c_entry(); } #ifdef DEBUG /******************************************************************************* * @brief Reports the name of the source file and the source line number * where the CHECK_PARAM error has occurred. * @param[in] file Pointer to the source file name * @param[in] line assert_param error line source number * @return None *******************************************************************************/ void check_failed(uint8_t *file, uint32_t line) { /* User can add his own implementation to report the file name and line number, ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ /* Infinite loop */ while(1); } #endif /* * @} */