Frank 26080115
These are the examples provided for [[/users/frank26080115/libraries/LPC1700CMSIS_Lib/]] Note, the entire "program" is not compilable!
LCD/NOKIA6610_LCD/abstract.h@0:bf7b9fba3924, 2011-03-20 (annotated)
- Committer:
- frank26080115
- Date:
- Sun Mar 20 05:38:56 2011 +0000
- Revision:
- 0:bf7b9fba3924
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| frank26080115 | 0:bf7b9fba3924 | 1 | ******************** (C) COPYRIGHT 2010 NXPSemiconductors ******************* |
| frank26080115 | 0:bf7b9fba3924 | 2 | * @file LCD\NOKIA6610_LCD\abstract.txt |
| frank26080115 | 0:bf7b9fba3924 | 3 | * @author NXP MCU SW Application Team |
| frank26080115 | 0:bf7b9fba3924 | 4 | * @version 2.0 |
| frank26080115 | 0:bf7b9fba3924 | 5 | * @date |
| frank26080115 | 0:bf7b9fba3924 | 6 | * @brief Description of the LCD NOKIA6610 example. |
| frank26080115 | 0:bf7b9fba3924 | 7 | ****************************************************************************** |
| frank26080115 | 0:bf7b9fba3924 | 8 | * Software that is described herein is for illustrative purposes only |
| frank26080115 | 0:bf7b9fba3924 | 9 | * which provides customers with programming information regarding the |
| frank26080115 | 0:bf7b9fba3924 | 10 | * products. This software is supplied "AS IS" without any warranties. |
| frank26080115 | 0:bf7b9fba3924 | 11 | * NXP Semiconductors assumes no responsibility or liability for the |
| frank26080115 | 0:bf7b9fba3924 | 12 | * use of the software, conveys no license or title under any patent, |
| frank26080115 | 0:bf7b9fba3924 | 13 | * copyright, or mask work right to the product. NXP Semiconductors |
| frank26080115 | 0:bf7b9fba3924 | 14 | * reserves the right to make changes in the software without |
| frank26080115 | 0:bf7b9fba3924 | 15 | * notification. NXP Semiconductors also make no representation or |
| frank26080115 | 0:bf7b9fba3924 | 16 | * warranty that such application will be suitable for the specified |
| frank26080115 | 0:bf7b9fba3924 | 17 | * use without further testing or modification. |
| frank26080115 | 0:bf7b9fba3924 | 18 | ****************************************************************************** |
| frank26080115 | 0:bf7b9fba3924 | 19 | |
| frank26080115 | 0:bf7b9fba3924 | 20 | @Example description: |
| frank26080115 | 0:bf7b9fba3924 | 21 | Purpose: |
| frank26080115 | 0:bf7b9fba3924 | 22 | This example describes how to use LCD NOKIA6610 on IAR-LPC1768-KS board |
| frank26080115 | 0:bf7b9fba3924 | 23 | Process: |
| frank26080115 | 0:bf7b9fba3924 | 24 | This example use LCD NOKIA6610 driver library that deriverd from IAR. |
| frank26080115 | 0:bf7b9fba3924 | 25 | Using SPI protocol to communicate with LCD controller chip. |
| frank26080115 | 0:bf7b9fba3924 | 26 | It starts by show NXP icon. |
| frank26080115 | 0:bf7b9fba3924 | 27 | LCD operation can be controlled by using: |
| frank26080115 | 0:bf7b9fba3924 | 28 | - AN_TRIM: ADC potentiometer - increase/decrease LCD backlight or contrast. |
| frank26080115 | 0:bf7b9fba3924 | 29 | - BUT1: used to adjust backlight. |
| frank26080115 | 0:bf7b9fba3924 | 30 | - BUT2: used to adjust LCD contrast. |
| frank26080115 | 0:bf7b9fba3924 | 31 | |
| frank26080115 | 0:bf7b9fba3924 | 32 | @Directory contents: |
| frank26080115 | 0:bf7b9fba3924 | 33 | \EWARM: includes EWARM (IAR) project and configuration files |
| frank26080115 | 0:bf7b9fba3924 | 34 | \Keil: includes RVMDK (Keil)project and configuration files |
| frank26080115 | 0:bf7b9fba3924 | 35 | |
| frank26080115 | 0:bf7b9fba3924 | 36 | drv_glcd_cbcf.h: Graphic LCD configuration file |
| frank26080115 | 0:bf7b9fba3924 | 37 | drv_glcd.h/.c: Graphic LCD driver |
| frank26080115 | 0:bf7b9fba3924 | 38 | glcd_ll.h/.c: Graphic LCD low level functions |
| frank26080115 | 0:bf7b9fba3924 | 39 | lcdtest.c: Main program |
| frank26080115 | 0:bf7b9fba3924 | 40 | lpc17xx_libcfg.h: Library configuration file - include needed driver library for this example |
| frank26080115 | 0:bf7b9fba3924 | 41 | NXP_logo.h/.c: NXP icon data |
| frank26080115 | 0:bf7b9fba3924 | 42 | Terminal_9_12x6: font (12x6) data |
| frank26080115 | 0:bf7b9fba3924 | 43 | makefile: Example's makefile (to build with GNU toolchain) |
| frank26080115 | 0:bf7b9fba3924 | 44 | |
| frank26080115 | 0:bf7b9fba3924 | 45 | |
| frank26080115 | 0:bf7b9fba3924 | 46 | @How to run: |
| frank26080115 | 0:bf7b9fba3924 | 47 | Hardware configuration: |
| frank26080115 | 0:bf7b9fba3924 | 48 | This example was tested only on: |
| frank26080115 | 0:bf7b9fba3924 | 49 | IAR LPC1768 KickStart vers.A |
| frank26080115 | 0:bf7b9fba3924 | 50 | These jumpers must be configured as following: |
| frank26080115 | 0:bf7b9fba3924 | 51 | - PWR_SEL: depend on power source |
| frank26080115 | 0:bf7b9fba3924 | 52 | - DBG_EN : ON |
| frank26080115 | 0:bf7b9fba3924 | 53 | - Remain jumpers: OFF |
| frank26080115 | 0:bf7b9fba3924 | 54 | |
| frank26080115 | 0:bf7b9fba3924 | 55 | Running mode: |
| frank26080115 | 0:bf7b9fba3924 | 56 | This example can run only on ROM mode. |
| frank26080115 | 0:bf7b9fba3924 | 57 | |
| frank26080115 | 0:bf7b9fba3924 | 58 | Note: If want to burn hex file to board by using Flash Magic, these jumpers need |
| frank26080115 | 0:bf7b9fba3924 | 59 | to be connected: |
| frank26080115 | 0:bf7b9fba3924 | 60 | - MCB1700 with LPC1768 ver.1: |
| frank26080115 | 0:bf7b9fba3924 | 61 | + RST: ON |
| frank26080115 | 0:bf7b9fba3924 | 62 | + ISP: ON |
| frank26080115 | 0:bf7b9fba3924 | 63 | - IAR LPC1768 KickStart vers.A: |
| frank26080115 | 0:bf7b9fba3924 | 64 | + RST_E: ON |
| frank26080115 | 0:bf7b9fba3924 | 65 | + ISP_E: ON |
| frank26080115 | 0:bf7b9fba3924 | 66 | |
| frank26080115 | 0:bf7b9fba3924 | 67 | (Please reference "LPC1000 Software Development Toolchain" - chapter 4 "Creating and working with |
| frank26080115 | 0:bf7b9fba3924 | 68 | LPC1000CMSIS project" for more information) |
| frank26080115 | 0:bf7b9fba3924 | 69 | |
| frank26080115 | 0:bf7b9fba3924 | 70 | Step to run: |
| frank26080115 | 0:bf7b9fba3924 | 71 | - Step 1: Build example. |
| frank26080115 | 0:bf7b9fba3924 | 72 | - Step 2: Burn hex file into board (if run on ROM mode) |
| frank26080115 | 0:bf7b9fba3924 | 73 | - Step 3: Configure hardware as above instruction |
| frank26080115 | 0:bf7b9fba3924 | 74 | - Step 4: Hit reset button to run example: |
| frank26080115 | 0:bf7b9fba3924 | 75 | + It shows NXP icon first. |
| frank26080115 | 0:bf7b9fba3924 | 76 | + Hit "BUT1" if want to adjust backlight, then turn ADC potentiometer AN_TRIM to |
| frank26080115 | 0:bf7b9fba3924 | 77 | change LCD backlight. |
| frank26080115 | 0:bf7b9fba3924 | 78 | + Hit "BUT2" if want to adjust contrast, then turn ADC potentiometer AN_TRIM to |
| frank26080115 | 0:bf7b9fba3924 | 79 | change LCD contrast. |
| frank26080115 | 0:bf7b9fba3924 | 80 | |
| frank26080115 | 0:bf7b9fba3924 | 81 | (Pls see "LPC17xx Example Description" document - chapter "Examples > LCD > NOKIA6610_LCD" |
| frank26080115 | 0:bf7b9fba3924 | 82 | for more details) |
| frank26080115 | 0:bf7b9fba3924 | 83 | |
| frank26080115 | 0:bf7b9fba3924 | 84 | @Tip: |
| frank26080115 | 0:bf7b9fba3924 | 85 | - Open \EWARM\*.eww project file to run example on IAR |
| frank26080115 | 0:bf7b9fba3924 | 86 | - Open \RVMDK\*.uvproj project file to run example on Keil |