File content as of revision 0:19e20135917b:

/* Copyright (c) 2010-2011 mbed.org, MIT License
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
* and associated documentation files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

#ifndef __LCD_DISCO_F469NI_H
#define __LCD_DISCO_F469NI_H

#ifdef TARGET_DISCO_F469NI

#include "mbed.h"
#include "stm32469i_discovery_lcd.h"

/*
  This class drives the LCD display (xxxxxx) present on DISCO_F469NI board.

  Usage:

  #include "mbed.h"
  #include "LCD_DISCO_F469NI.h"

  LCD_DISCO_F469NI lcd;

  int main()
  {
      lcd.Clear(LCD_COLOR_BLUE);
      lcd.SetBackColor(LCD_COLOR_BLUE);
      lcd.SetTextColor(LCD_COLOR_WHITE);
      lcd.DisplayStringAt(0, LINE(5), (uint8_t *)"HELLO", CENTER_MODE);
      while(1)
      {
      }
  }
*/
class LCD_DISCO_F469NI
{
  
public:
  //! Constructor
  LCD_DISCO_F469NI();

  //! Destructor
  ~LCD_DISCO_F469NI();


  /**
    * @brief  Initializes the DSI LCD.
    * @param  None
    * @retval LCD state
    */
  uint8_t Init(void);

  /**
    * @brief  Initializes the DSI LCD. 
    * The initialization is done as below:
    *     - DSI PLL initialization
    *     - DSI initialization
    *     - LTDC initialization
    *     - OTM8009A LCD Display IC Driver initialization
    * @param  None
    * @retval LCD state
    */
  uint8_t InitEx(LCD_OrientationTypeDef orientation);

  /**
    * @brief  BSP LCD Reset
    *         Hw reset the LCD DSI activating its XRES signal (active low for some time);
    *         and desactivating it later.
    *         This signal is only cabled on Discovery Rev B and beyond.
    */
  void Reset(void);

  /**
    * @brief  Gets the LCD X size.
    * @retval Used LCD X size
    */
  uint32_t GetXSize(void);

  /**
    * @brief  Gets the LCD Y size.
    * @retval Used LCD Y size
    */
  uint32_t GetYSize(void);

  /**
    * @brief  Set the LCD X size.
    * @param  imageWidthPixels : uint32_t image width in pixels unit
    * @retval None
    */
  void SetXSize(uint32_t imageWidthPixels);

  /**
    * @brief  Set the LCD Y size.
    * @param  imageHeightPixels : uint32_t image height in lines unit
    */
  void SetYSize(uint32_t imageHeightPixels);

  /**
    * @brief  Initializes the LCD layers.
    * @param  LayerIndex: Layer foreground or background
    * @param  FB_Address: Layer frame buffer
    * @retval None
    */
  void LayerDefaultInit(uint16_t LayerIndex, uint32_t FB_Address);

  /**
    * @brief  Selects the LCD Layer.
    * @param  LayerIndex: Layer foreground or background
    */
  void SelectLayer(uint32_t LayerIndex);

  /**
    * @brief  Sets an LCD Layer visible
    * @param  LayerIndex: Visible Layer
    * @param  State: New state of the specified layer
    *          This parameter can be one of the following values:
    *            @arg  ENABLE
    *            @arg  DISABLE
    */
  void SetLayerVisible(uint32_t LayerIndex, FunctionalState State);

  /**
    * @brief  Configures the transparency.
    * @param  LayerIndex: Layer foreground or background.
    * @param  Transparency: Transparency
    *           This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF
    */
  void SetTransparency(uint32_t LayerIndex, uint8_t Transparency);

  /**
    * @brief  Sets an LCD layer frame buffer address.
    * @param  LayerIndex: Layer foreground or background
    * @param  Address: New LCD frame buffer value
    */
  void SetLayerAddress(uint32_t LayerIndex, uint32_t Address);

  /**
    * @brief  Sets display window.
    * @param  LayerIndex: Layer index
    * @param  Xpos: LCD X position
    * @param  Ypos: LCD Y position
    * @param  Width: LCD window width
    * @param  Height: LCD window height
    */
  void SetLayerWindow(uint16_t LayerIndex, uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height);

  /**
    * @brief  Configures and sets the color keying.
    * @param  LayerIndex: Layer foreground or background
    * @param  RGBValue: Color reference
    */
  void SetColorKeying(uint32_t LayerIndex, uint32_t RGBValue);

  /**
    * @brief  Disables the color keying.
    * @param  LayerIndex: Layer foreground or background
    */
  void ResetColorKeying(uint32_t LayerIndex);

  /**
    * @brief  Sets the LCD text color.
    * @param  Color: Text color code ARGB(8-8-8-8);
    */
  void SetTextColor(uint32_t Color);

  /**
    * @brief  Gets the LCD text color.
    * @retval Used text color.
    */
  uint32_t GetTextColor(void);

  /**
    * @brief  Sets the LCD background color.
    * @param  Color: Layer background color code ARGB(8-8-8-8);
    */
  void SetBackColor(uint32_t Color);

  /**
    * @brief  Gets the LCD background color.
    * @retval Used background color
    */
  uint32_t GetBackColor(void);

  /**
    * @brief  Sets the LCD text font.
    * @param  fonts: Layer font to be used
    */
  void SetFont(sFONT *fonts);

  /**
    * @brief  Gets the LCD text font.
    * @retval Used layer font
    */
  sFONT *GetFont(void);

  /**
    * @brief  Reads an LCD pixel.
    * @param  Xpos: X position
    * @param  Ypos: Y position
    * @retval RGB pixel color
    */
  uint32_t ReadPixel(uint16_t Xpos, uint16_t Ypos);

  /**
    * @brief  Clears the whole currently active layer of LTDC.
    * @param  Color: Color of the background
    */
  void Clear(uint32_t Color);

  /**
    * @brief  Clears the selected line in currently active layer.
    * @param  Line: Line to be cleared
    */
  void ClearStringLine(uint32_t Line);

  /**
    * @brief  Displays one character in currently active layer.
    * @param  Xpos: Start column address
    * @param  Ypos: Line where to display the character shape.
    * @param  Ascii: Character ascii code
    *           This parameter must be a number between Min_Data = 0x20 and Max_Data = 0x7E
    */
  void DisplayChar(uint16_t Xpos, uint16_t Ypos, uint8_t Ascii);

  /**
    * @brief  Displays characters in currently active layer.
    * @param  Xpos: X position (in pixel);
    * @param  Ypos: Y position (in pixel);
    * @param  Text: Pointer to string to display on LCD
    * @param  Mode: Display mode
    *          This parameter can be one of the following values:
    *            @arg  CENTER_MODE
    *            @arg  RIGHT_MODE
    *            @arg  LEFT_MODE
    */
  void DisplayStringAt(uint16_t Xpos, uint16_t Ypos, uint8_t *Text, Text_AlignModeTypdef Mode);

  /**
    * @brief  Displays a maximum of 60 characters on the LCD.
    * @param  Line: Line where to display the character shape
    * @param  ptr: Pointer to string to display on LCD
    */
  void DisplayStringAtLine(uint16_t Line, uint8_t *ptr);

  /**
    * @brief  Draws an horizontal line in currently active layer.
    * @param  Xpos: X position
    * @param  Ypos: Y position
    * @param  Length: Line length
    */
  void DrawHLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length);

  /**
    * @brief  Draws a vertical line in currently active layer.
    * @param  Xpos: X position
    * @param  Ypos: Y position
    * @param  Length: Line length
    */
  void DrawVLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length);

  /**
    * @brief  Draws an uni-line (between two points); in currently active layer.
    * @param  x1: Point 1 X position
    * @param  y1: Point 1 Y position
    * @param  x2: Point 2 X position
    * @param  y2: Point 2 Y position
    */
  void DrawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);

  /**
    * @brief  Draws a rectangle in currently active layer.
    * @param  Xpos: X position
    * @param  Ypos: Y position
    * @param  Width: Rectangle width
    * @param  Height: Rectangle height
    */
  void DrawRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height);

  /**
    * @brief  Draws a circle in currently active layer.
    * @param  Xpos: X position
    * @param  Ypos: Y position
    * @param  Radius: Circle radius
    */
  void DrawCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius);

  /**
    * @brief  Draws an poly-line (between many points); in currently active layer.
    * @param  Points: Pointer to the points array
    * @param  PointCount: Number of points
    */
  void DrawPolygon(pPoint Points, uint16_t PointCount);

  /**
    * @brief  Draws an ellipse on LCD in currently active layer.
    * @param  Xpos: X position
    * @param  Ypos: Y position
    * @param  XRadius: Ellipse X radius
    * @param  YRadius: Ellipse Y radius
    */
  void DrawEllipse(int Xpos, int Ypos, int XRadius, int YRadius);

  /**
    * @brief  Draws a bitmap picture loaded in the internal Flash (32 bpp); in currently active layer.
    * @param  Xpos: Bmp X position in the LCD
    * @param  Ypos: Bmp Y position in the LCD
    * @param  pbmp: Pointer to Bmp picture address in the internal Flash
    */
  void DrawBitmap(uint32_t Xpos, uint32_t Ypos, uint8_t *pbmp);

  /**
    * @brief  Draws a full rectangle in currently active layer.
    * @param  Xpos: X position
    * @param  Ypos: Y position
    * @param  Width: Rectangle width
    * @param  Height: Rectangle height
    */
  void FillRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height);

  /**
    * @brief  Draws a full circle in currently active layer.
    * @param  Xpos: X position
    * @param  Ypos: Y position
    * @param  Radius: Circle radius
    */
  void FillCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius);

  /**
    * @brief  Draws a full poly-line (between many points); in currently active layer.
    * @param  Points: Pointer to the points array
    * @param  PointCount: Number of points
    */
  void FillPolygon(pPoint Points, uint16_t PointCount);

  /**
    * @brief  Draws a full ellipse in currently active layer.
    * @param  Xpos: X position
    * @param  Ypos: Y position
    * @param  XRadius: Ellipse X radius
    * @param  YRadius: Ellipse Y radius
    */
  void FillEllipse(int Xpos, int Ypos, int XRadius, int YRadius);

  /**
    * @brief  Switch back on the display if was switched off by previous call of DisplayOff();.
    *         Exit DSI ULPM mode if was allowed and configured in Dsi Configuration.
    */
  void DisplayOn(void);

  /**
    * @brief  Switch Off the display.
    *         Enter DSI ULPM mode if was allowed and configured in Dsi Configuration.
    */
  void DisplayOff(void);

  /**
    * @brief  Draws a pixel on LCD.
    * @param  Xpos: X position
    * @param  Ypos: Y position
    * @param  RGB_Code: Pixel color in ARGB mode (8-8-8-8);
    */
  void DrawPixel(uint16_t Xpos, uint16_t Ypos, uint32_t RGB_Code);

private:

};

#else
#error "This class must be used with DISCO_F469NI board only."
#endif // TARGET_DISCO_F469NI

#endif