Diff: Components/Common/io.h

Revision:

2:123b894b49dd

Parent:

1:9e4eb47092ed

--- a/Components/Common/io.h	Mon May 30 11:09:05 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,150 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    io.h
-  * @author  MCD Application Team
-  * @version V4.0.1
-  * @date    21-July-2015
-  * @brief   This file contains all the functions prototypes for the IO driver.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __IO_H
-#define __IO_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include <stdint.h>
-
-/** @addtogroup BSP
-  * @{
-  */
-
-/** @addtogroup Components
-  * @{
-  */
-    
-/** @addtogroup IO
-  * @{
-  */
-
-/** @defgroup IO_Exported_Types
-  * @{
-  */
-
-/**
-  * @brief  IO Bit SET and Bit RESET enumeration
-  */
-typedef enum
-{
-  IO_PIN_RESET = 0,
-  IO_PIN_SET
-}IO_PinState;
-
-typedef enum
-{
-   IO_MODE_INPUT = 0,   /* input floating */
-   IO_MODE_OUTPUT,      /* output Push Pull */
-   IO_MODE_IT_RISING_EDGE,   /* float input - irq detect on rising edge */
-   IO_MODE_IT_FALLING_EDGE,  /* float input - irq detect on falling edge */
-   IO_MODE_IT_LOW_LEVEL,     /* float input - irq detect on low level */
-   IO_MODE_IT_HIGH_LEVEL,    /* float input - irq detect on high level */
-   /* following modes only available on MFX*/
-   IO_MODE_ANALOG,           /* analog mode */
-   IO_MODE_OFF,              /* when pin isn't used*/
-   IO_MODE_INPUT_PU,         /* input with internal pull up resistor */
-   IO_MODE_INPUT_PD,         /* input with internal pull down resistor */
-   IO_MODE_OUTPUT_OD,          /* Open Drain output without internal resistor */
-   IO_MODE_OUTPUT_OD_PU,       /* Open Drain output with  internal pullup resistor */
-   IO_MODE_OUTPUT_OD_PD,       /* Open Drain output with  internal pulldown resistor */
-   IO_MODE_OUTPUT_PP,          /* PushPull output without internal resistor */
-   IO_MODE_OUTPUT_PP_PU,       /* PushPull output with  internal pullup resistor */
-   IO_MODE_OUTPUT_PP_PD,       /* PushPull output with  internal pulldown resistor */
-   IO_MODE_IT_RISING_EDGE_PU,   /* push up resistor input - irq on rising edge  */
-   IO_MODE_IT_RISING_EDGE_PD,   /* push dw resistor input - irq on rising edge  */
-   IO_MODE_IT_FALLING_EDGE_PU,  /* push up resistor input - irq on falling edge */
-   IO_MODE_IT_FALLING_EDGE_PD,  /* push dw resistor input - irq on falling edge */
-   IO_MODE_IT_LOW_LEVEL_PU,     /* push up resistor input - irq detect on low level */
-   IO_MODE_IT_LOW_LEVEL_PD,     /* push dw resistor input - irq detect on low level */
-   IO_MODE_IT_HIGH_LEVEL_PU,    /* push up resistor input - irq detect on high level */
-   IO_MODE_IT_HIGH_LEVEL_PD,    /* push dw resistor input - irq detect on high level */
-
-}IO_ModeTypedef;
-
-/** @defgroup IO_Driver_structure  IO Driver structure
-  * @{
-  */
-typedef struct
-{  
-  void       (*Init)(uint16_t);
-  uint16_t   (*ReadID)(uint16_t);
-  void       (*Reset)(uint16_t);
-  
-  void       (*Start)(uint16_t, uint32_t);
-  uint8_t    (*Config)(uint16_t, uint32_t, IO_ModeTypedef);
-  void       (*WritePin)(uint16_t, uint32_t, uint8_t);
-  uint32_t   (*ReadPin)(uint16_t, uint32_t);
-  
-  void       (*EnableIT)(uint16_t);
-  void       (*DisableIT)(uint16_t);
-  uint32_t    (*ITStatus)(uint16_t, uint32_t);
-  void       (*ClearIT)(uint16_t, uint32_t);
-    
-}IO_DrvTypeDef;
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __IO_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/