Revision 83:8a40adfe8776, committed 2014-04-28

Comitter:

bogdanm

Date:

Mon Apr 28 17:39:05 2014 +0100

Parent:

82:6473597d706e

Child:

84:0b3ab51c8877

Commit message:

Release 83 of the mbed library

Main changes:

- updated tests
- K64F TCP/IP support
- lots of fixes in various targets

Changed in this revision

--- a/BusIn.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/BusIn.h	Mon Apr 28 17:39:05 2014 +0100
@@ -51,7 +51,13 @@
      *   An integer with each bit corresponding to the value read from the associated DigitalIn pin
      */
     int read();
-
+    
+    /** Set the input pin mode
+     *
+     *  @param mode PullUp, PullDown, PullNone
+     */
+    void mode(PinMode pull);
+	
 #ifdef MBED_OPERATORS
     /** A shorthand for read()
      */

--- a/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device.h	Mon Apr 28 17:39:05 2014 +0100
@@ -49,7 +49,7 @@
 
 #define DEVICE_DEBUG_AWARENESS  0
 
-#define DEVICE_STDIO_MESSAGES   0
+#define DEVICE_STDIO_MESSAGES   1
 
 #define DEVICE_ERROR_RED        1
 

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/common/phyksz8081/fsl_phy_driver.h	Mon Apr 28 17:39:05 2014 +0100
@@ -0,0 +1,190 @@
+/*
+ * Copyright (c) 2013 - 2014, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __FSL_PHY_DRIVER_H__
+#define __FSL_PHY_DRIVER_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "fsl_enet_driver.h"
+/*! 
+ * @addtogroup phy_driver
+ * @{
+ */
+
+/*! @file*/
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+/*! @brief Defines the PHY return status. */
+typedef enum _phy_status
+{
+    kStatus_PHY_Success = 0, /*!< Success*/
+    kStatus_PHY_InvaildInput = 1, /*!< Invalid PHY input parameter*/
+    kStatus_PHY_TimeOut = 2,  /*!< PHY timeout*/
+    kStatus_PHY_Fail = 3  /*!< PHY fail*/	
+} phy_status_t;
+
+/*! @brief Defines the ENET timeout.*/
+typedef enum _phy_timeout
+{
+    kPhyTimeout = 0x10000, /*!< ENET resets timeout.*/
+} phy_timeout_t;
+
+/*! @brief Defines the PHY register.*/
+typedef enum _enet_phy_register
+{
+    kEnetPhyCR = 0, /*!< PHY control register */
+    kEnetPhySR = 1, /*!< PHY status register*/
+    kEnetPhyId1 = 2, /*!< PHY identification register 1*/
+    kEnetPhyId2 = 3, /*!< PHY identification register 2*/
+    kEnetPhyCt2 = 0x1e /*!< PHY control2 register*/
+} enet_phy_register_t;
+
+/*! @brief Defines the control flag.*/
+typedef enum _enet_phy_control
+{
+    kEnetPhyAutoNeg = 0x1000,/*!< ENET PHY auto negotiation control*/
+    kEnetPhySpeed = 0x2000, /*! ENET PHY speed control*/
+    kEnetPhyLoop = 0x4000, /*!< ENET PHY loop control*/
+    kEnetPhyReset = 0x8000, /*!< ENET PHY reset control*/
+    kEnetPhy10HalfDuplex = 0x01, /*!< ENET PHY 10 M half duplex*/
+    kEnetPhy100HalfDuplex = 0x02,/*!< ENET PHY 100 M half duplex*/
+    kEnetPhy10FullDuplex = 0x05,/*!< ENET PHY 10 M full duplex*/
+    kEnetPhy100FullDuplex = 0x06/*!< ENET PHY 100 M full duplex*/
+} enet_phy_control_t;
+
+/*! @brief Defines the PHY link speed. */
+typedef enum _enet_phy_speed
+{
+    kEnetSpeed10M = 0,   /*!< ENET PHY 10 M speed*/
+    kEnetSpeed100M = 1  /*!< ENET PHY 100 M speed*/
+} enet_phy_speed_t;
+
+/*! @brief Defines the PHY link duplex.*/
+typedef enum _enet_phy_duplex
+{
+    kEnetHalfDuplex = 0, /*!< ENET PHY half duplex*/
+    kEnetFullDuplex = 1  /*!< ENET PHY full duplex*/
+} enet_phy_duplex_t;
+
+/*! @brief Defines the PHY status.*/
+typedef enum _enet_phy_status
+{
+    kEnetPhyLinkStatus = 0x4,  /*!< ENET PHY link status bit*/
+    kEnetPhyAutoNegAble = 0x08, /*!< ENET PHY auto negotiation ability*/
+    kEnetPhyAutoNegComplete = 0x20, /*!< ENET PHY auto negotiation complete*/
+    kEnetPhySpeedDulpexMask = 0x07 /*!< ENET PHY speed mask on status register 2*/
+} enet_phy_status_t;
+
+/*! @brief Defines the basic PHY application.*/
+typedef struct ENETPhyApi
+{
+    uint32_t (* phy_auto_discover)(enet_dev_if_t * enetIfPtr);/*!< PHY auto discover*/
+    uint32_t (* phy_init)(enet_dev_if_t * enetIfPtr);/*!< PHY initialize*/
+    uint32_t (* phy_get_link_speed)(enet_dev_if_t * enetIfPtr, enet_phy_speed_t *speed);/*!< Get PHY speed*/
+    uint32_t (* phy_get_link_status)(enet_dev_if_t * enetIfPtr, bool *status);/*! Get PHY link status*/
+    uint32_t (* phy_get_link_duplex)(enet_dev_if_t * enetIfPtr, enet_phy_duplex_t *duplex);/*!< Get PHY link duplex*/
+} enet_phy_api_t;
+
+/*******************************************************************************
+ * Global variables
+ ******************************************************************************/
+extern const enet_phy_api_t g_enetPhyApi;
+
+/*******************************************************************************
+ * API 
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*! 
+  * @name PHY Driver
+  * @{
+  */
+
+/*!
+ * @brief Initializes PHY.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */
+uint32_t phy_init(enet_dev_if_t * enetIfPtr);
+
+/*!
+ * @brief PHY address auto discover.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */
+uint32_t phy_auto_discover(enet_dev_if_t * enetIfPtr);
+
+/*!
+ * @brief Gets the PHY link speed.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param status The link speed of PHY.
+ * @return The execution status.
+ */
+uint32_t phy_get_link_speed(enet_dev_if_t * enetIfPtr, enet_phy_speed_t *status);
+
+/*!
+ * @brief Gets the PHY link status.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param status The link on or down status of the PHY.
+ * @return The execution status.
+ */
+uint32_t phy_get_link_status(enet_dev_if_t * enetIfPtr, bool *status);
+
+/*!
+ * @brief Gets the PHY link duplex.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param status The link duplex status of PHY.
+ * @return The execution status.
+ */
+uint32_t phy_get_link_duplex(enet_dev_if_t * enetIfPtr, enet_phy_duplex_t *status);
+
+/* @} */
+
+#if defined(__cplusplus)
+extern }
+#endif
+
+/*! @}*/
+
+#endif /* __FSL_PHY_DRIVER_H__ */
+/*******************************************************************************
+ * EOF
+ ******************************************************************************/
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/drivers/enet/fsl_enet_driver.h	Mon Apr 28 17:39:05 2014 +0100
@@ -0,0 +1,947 @@
+/*
+ * Copyright (c) 2013 - 2014, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __FSL_ENET_DRIVER_H__
+#define __FSL_ENET_DRIVER_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "fsl_enet_hal.h"
+#include "fsl_os_abstraction.h"
+/*! 
+ * @addtogroup enet_driver
+ * @{
+ */
+
+/*******************************************************************************
+ * Definitions
+
+ ******************************************************************************/
+/*! @brief Defines the approach: ENET interrupt handler do receive */
+#define ENET_RECEIVE_ALL_INTERRUPT  0
+
+/*! @brief Defines the statistic enable macro.*/
+#define ENET_ENABLE_DETAIL_STATS    0
+
+/*! @brief Defines the alignment operation.*/
+#define ENET_ALIGN(x,align)        ((unsigned int)((x) + ((align)-1)) & (unsigned int)(~(unsigned int)((align)- 1)))
+
+#if FSL_FEATURE_ENET_SUPPORT_PTP
+/*! @brief Defines the PTP IOCTL macro.*/
+typedef enum _enet_ptp_ioctl
+{
+    kEnetPtpGetRxTimestamp = 0,    /*!< ENET PTP gets receive timestamp*/
+    kEnetPtpGetTxTimestamp,        /*!< ENET PTP gets transmit timestamp*/
+    kEnetPtpGetCurrentTime,        /*!< ENET PTP gets current time*/
+    kEnetPtpSetCurrentTime,        /*!< ENET PTP sets current time*/
+    kEnetPtpFlushTimestamp,        /*!< ENET PTP flushes timestamp*/
+    kEnetPtpCorrectTime,           /*!< ENET PTP time correction*/
+    kEnetPtpSendEthernetPtpV2,     /*!< ENET PTPv2 sends Ethernet frame*/
+    kEnetPtpReceiveEthernetPtpV2   /*!< ENET PTPv2 receives with Ethernet frame*/
+} enet_ptp_ioctl_t;
+
+/*! @brief Defines the PTP message buffer number.*/
+typedef enum _enet_ptp_buffer_number
+{
+    kEnetPtpL2bufferNumber = 10,  /*!< PTP layer2 frame buffer number*/
+    kEnetPtpRingNumber = 25       /*!< PTP Ring buffer number*/
+} enet_ptp_buffer_number_t;
+
+/*! @brief Defines the ENET PTP message related constant.*/
+typedef enum _enet_ptp_event_type
+{
+     kEnetPtpSourcePortIdLen = 10,  /*!< PTP message sequence id length*/
+     kEnetPtpEventMsgType = 3,      /*!< PTP event message type*/
+     kEnetPtpEventPort = 319,       /*!< PTP event port number*/
+     kEnetPtpGnrlPort = 320         /*!< PTP general port number*/
+} enet_ptp_event_type_t;
+
+/*! @brief Defines all ENET PTP content offsets in the IPv4 PTP UDP/IP multicast message.*/
+typedef enum _enet_ipv4_ptp_content_offset
+{
+    kEnetPtpIpVersionOffset = 0xe,   /*!< IPv4 PTP message IP version offset*/
+    kEnetPtpUdpProtocolOffset = 0x17,/*!< IPv4 PTP message UDP protocol offset*/
+    kEnetPtpUdpPortOffset = 0x24,    /*!< IPv4 PTP message UDP port offset*/
+    kEnetPtpUdpMsgTypeOffset = 0x2a, /*!< IPv4 PTP message UDP message type offset*/
+    kEnetPtpUdpVersionoffset = 0x2b, /*!< IPv4 PTP message UDP version offset*/
+    kEnetPtpUdpClockIdOffset = 0x3e, /*!< IPv4 PTP message UDP clock id offset*/
+    kEnetPtpUdpSequenIdOffset = 0x48,/*!< IPv4 PTP message UDP sequence id offset*/
+    kEnetPtpUdpCtlOffset = 0x4a      /*!< IPv4 PTP message UDP control offset*/
+} enet_ipv4_ptp_content_offset_t;
+
+/*! @brief Defines all ENET PTP content offset in THE IPv6 PTP UDP/IP multicast message.*/
+typedef enum _enet_ipv6_ptp_content_offset
+{
+    kEnetPtpIpv6UdpProtocolOffset = 0x14,  /*!< IPv6 PTP message UDP protocol offset*/
+    kEnetPtpIpv6UdpPortOffset = 0x38,      /*!< IPv6 PTP message UDP port offset*/
+    kEnetPtpIpv6UdpMsgTypeOffset = 0x3e,   /*!< IPv6 PTP message UDP message type offset*/
+    kEnetPtpIpv6UdpVersionOffset = 0x3f,   /*!< IPv6 PTP message UDP version offset*/
+    kEnetPtpIpv6UdpClockIdOffset = 0x52,   /*!< IPv6 PTP message UDP clock id offset*/
+    kEnetPtpIpv6UdpSequenceIdOffset = 0x5c,/*!< IPv6 PTP message UDP sequence id offset*/
+    kEnetPtpIpv6UdpCtlOffset = 0x5e        /*!< IPv6 PTP message UDP control offset*/
+} enet_ipv6_ptp_content_offset_t;
+
+/*! @brief Defines all ENET PTP content offset in the PTP Layer2 Ethernet message.*/
+typedef enum _enet_ethernet_ptp_content_offset
+{
+    kEnetPtpEtherPktTypeOffset = 0x0c,   /*!< PTPv2 message Ethernet packet type offset*/
+    kEnetPtpEtherMsgTypeOffset = 0x0e,   /*!< PTPv2 message Ethernet message type offset*/
+    kEnetPtpEtherVersionOffset = 0x0f,   /*!< PTPv2 message Ethernet version type offset*/
+    kEnetPtpEtherClockIdOffset = 0x22,   /*!< PTPv2 message Ethernet clock id offset*/
+    kEnetPtpEtherSequenceIdOffset = 0x2c,/*!< PTPv2 message Ethernet sequence id offset*/
+    kEnetPtpEtherCtlOffset = 0x2e        /*!< PTPv2 message Ethernet control offset*/
+} enet_ethernet_ptp_content_offset_t;
+
+/*! @brief Defines the 1588 timer parameters.*/
+typedef enum _enet_ptp_timer_wrap_period
+{
+    kEnetPtpAtperVaule = 1000000000, /*!< PTP timer wrap around one second */
+    kEnetBaseIncreaseUnit = 2        /*!< PTP timer adjusts clock and increases value to 2*/
+} enet_ptp_timer_wrap_period_t;
+#endif
+
+/*! @brief Defines the interrupt source index for the interrupt vector change table.*/
+typedef enum _enet_interrupt_number
+{
+    kEnetTstimerInt = 0, /*!< Timestamp interrupt*/
+    kEnetTsAvailInt, /*!< TS-avail interrupt*/
+    kEnetWakeUpInt,  /*!< Wakeup interrupt*/
+    kEnetPlrInt,     /*!< Plr interrupt*/
+    kEnetUnInt,      /*!< Un interrupt*/
+    kEnetRlInt,      /*!< RL interrupt*/
+    kEnetLcInt,      /*!< LC interrupt*/
+    kEnetEberrInt,   /*!< Eberr interrupt*/
+    kEnetMiiInt,     /*!< MII interrupt*/
+    kEnetRxbInt ,    /*!< Receive byte interrupt*/
+    kEnetRxfInt,    /*!< Receive frame interrupt*/
+    kEnetTxbInt,    /*!< Transmit byte interrupt*/
+    kEnetTxfInt,    /*!< Transmit frame interrupt*/
+    kEnetGraInt,    /*!< Gra interrupt*/
+    kEnetBabtInt,   /*!< Babt interrupt*/
+    kEnetBabrInt,   /*!< Babr interrupt*/
+    kEnetIntNum     /*!< Interrupt number*/
+} enet_interrupt_number_t;
+
+/*! @brief Defines the ENET main constant.*/
+typedef enum _enet_frame_max
+{
+    kEnetMaxTimeout = 0x10000,    /*!< Maximum timeout*/
+    kEnetMaxFrameSize = 1518,     /*!< Maximum frame size*/
+    kEnetMaxFrameVlanSize = 1522, /*!< Maximum VLAN frame size*/
+    kEnetMaxFrameDateSize = 1500, /*!< Maximum frame data size*/
+    kEnetMaxFrameBdNumbers = 7,   /*!< Maximum buffer descriptor numbers of a frame*/
+    kEnetFrameFcsLen = 4,         /*!< FCS length*/
+    kEnetEthernetHeadLen = 14     /*!< Ethernet Frame header length*/
+} enet_frame_max_t;
+
+/*! @brief Defines the CRC data for a hash value calculation.*/
+typedef enum _enet_crc_parameter
+{
+    kEnetCrcData = 0xFFFFFFFFU,  /*!< CRC-32 maximum data */
+    kEnetCrcOffset = 8,          /*!< CRC-32 offset2*/
+    kEnetCrcMask1 = 0x3F         /*!< CRC-32 mask*/
+} enet_crc_parameter_t;
+
+/*! @brief Defines the ENET protocol type and main parameters.*/
+typedef enum _enet_protocol_type
+{
+    kEnetProtocolIeee8023 = 0x88F7,  /*!< Packet type Ethernet ieee802.3*/
+    kEnetProtocolIpv4 = 0x0800,      /*!< Packet type IPv4*/
+    kEnetProtocolIpv6 = 0x86dd,      /*!< Packet type IPv6*/
+    kEnetProtocol8021QVlan = 0x8100, /*!< Packet type VLAN*/
+    kEnetPacketUdpVersion = 0x11,    /*!< UDP protocol type*/
+    kEnetPacketIpv4Version = 0x4,    /*!< Packet IP version IPv4*/
+    kEnetPacketIpv6Version = 0x6     /*!< Packet IP version IPv6*/
+} enet_protocol_type_t;
+
+/*! @brief Defines the ENET MAC control Configure*/
+typedef enum _enet_mac_control_flag
+{
+    kEnetSleepModeEnable = 0x1, /*!< ENET control sleep mode Enable*/
+    kEnetPayloadlenCheckEnable = 0x2, /*!< ENET receive payload length check Enable*/
+    kEnetRxFlowControlEnable = 0x4, /*!< ENET flow control, receiver detects PAUSE frames and stops transmitting data when a PAUSE frame is detected*/
+    kEnetRxCrcFwdEnable = 0x8, /*!< Received frame crc is stripped from the frame*/
+    kEnetRxPauseFwdEnable = 0x10,/*!< Pause frames are forwarded to the user application*/
+    kEnetRxPadRemoveEnable = 0x20, /*!< Padding is removed from received frames*/
+    kEnetRxBcRejectEnable = 0x40, /*!< Broadcast frame reject*/
+    kEnetRxPromiscuousEnable = 0x80, /*!< Promiscuous mode enabled*/
+    kEnetRxMiiLoopback = 0x100, /*!< MAC MII loopback mode*/
+} enet_mac_control_flag_t;
+
+/*! @brief Defines the multicast group structure for the ENET device. */
+typedef struct ENETMulticastGroup
+{
+    enetMacAddr groupAdddr;        /*!< Multicast group address*/
+    uint32_t hash;                 /*!< Hash value of the multicast group address*/
+    struct ENETMulticastGroup *next; /*!< Pointer of the next group structure*/
+    struct ENETMulticastGroup *prv;  /*!< Pointer of the previous structure*/
+} enet_multicast_group_t;
+
+/*! @brief Defines the receive buffer descriptor configure structure.*/
+typedef struct ENETRxBdConfig
+{
+    uint8_t *rxBdPtrAlign;      /*!< Aligned receive buffer descriptor pointer */
+    uint8_t *rxBufferAlign;     /*!< Aligned receive data buffer pointer */
+    uint8_t *rxLargeBufferAlign; /*!< Aligned receive large data buffer pointer*/
+    uint8_t rxBdNum;             /*!< Aligned receive buffer descriptor pointer*/
+    uint8_t rxBufferNum;         /*!< Receive buffer number*/
+    uint8_t rxLargeBufferNum;    /*!< Large receive buffer number*/
+    uint32_t rxLargeBufferSizeAlign; /*!< Aligned large receive buffer size*/
+}enet_rxbd_config_t;
+
+/*! @brief Defines the transmit buffer descriptor configure structure.*/
+typedef struct ENETTxBdConfig
+{
+    uint8_t *txBdPtrAlign;      /*!< Aligned transmit buffer descriptor pointer*/
+    uint8_t *txBufferAlign;     /*!< Aligned transmit buffer descriptor pointer*/
+    uint8_t txBufferNum;         /*!< Transmit buffer number*/
+    uint32_t txBufferSizeAlign;  /*!< Aligned transmit buffer size*/
+}enet_txbd_config_t;
+
+/*! @brief Defines the basic configuration structure for the ENET device.*/
+typedef struct ENETMacConfig
+{
+    uint16_t rxBufferSize;  /*!< Receive buffer size*/
+    uint16_t rxLargeBufferNumber; /*!< Receive large buffer number; Needed only when the BD size is smaller than the maximum frame length.*/
+    uint16_t rxBdNumber;    /*!< Receive buffer descriptor number*/
+    uint16_t txBdNumber;    /*!< Transmit buffer descriptor number*/
+    enetMacAddr macAddr;    /*!< MAC hardware address*/
+    enet_config_rmii_t rmiiCfgMode;/*!< RMII configure mode*/
+    enet_config_speed_t speed;     /*!< Speed configuration*/
+    enet_config_duplex_t duplex;   /*!< Duplex configuration*/
+    /*!< Mac control configure, it is recommended to use enet_mac_control_flag_t
+       it is special control set for loop mode, sleep mode, crc forward/terminate etc*/
+    uint32_t macCtlConfigure; 
+    bool isTxAccelEnabled;/*!< Switcher to enable transmit accelerator*/
+    bool isRxAccelEnabled;/*!< Switcher to enable receive accelerator*/
+    bool isStoreAndFwEnabled;  /*!< Switcher to enable store and forward*/
+    enet_config_rx_accelerator_t rxAcceler; /*!< Receive accelerator configure*/
+    enet_config_tx_accelerator_t txAcceler; /*!< Transmit accelerator configure*/
+    bool isVlanEnabled;    /*!< Switcher to enable VLAN frame*/
+    bool isPhyAutoDiscover;/*!< Switcher to use PHY auto discover*/
+    uint32_t miiClock;     /*!< MII speed*/
+#if FSL_FEATURE_ENET_SUPPORT_PTP
+    uint16_t ptpRingBufferNumber; /*!< PTP ring buffer number*/
+    bool isSlaveModeEnabled;      /*!< PTP timer configuration*/
+#endif
+} enet_mac_config_t;
+
+/*! @brief Defines the basic configuration for PHY.*/
+typedef struct ENETPhyConfig
+{
+    uint8_t phyAddr;    /*!< PHY address*/
+    bool isLoopEnabled; /*!< Switcher to enable the HY loop mode*/
+} enet_phy_config_t;
+
+#if FSL_FEATURE_ENET_SUPPORT_PTP
+/*! @brief Defines the  ENET Mac PTP timestamp structure.*/
+typedef struct ENETMacPtpTime
+{
+    uint64_t second;     /*!< Second*/
+    uint32_t nanosecond; /*!< Nanosecond*/
+} enet_mac_ptp_time_t;
+
+/*! @brief Defines the ENET PTP timer drift structure.*/
+typedef struct ENETPtpDrift
+{
+    int32_t drift;    /*!< Drift for the PTP timer to adjust*/
+} enet_ptp_drift_t;
+
+/*! @brief Defines the ENET MAC PTP time parameter.*/
+typedef struct ENETPtpMasterTimeData
+{
+    uint8_t masterPtpInstance;/*!< PTP master timer instance*/
+    uint64_t second;          /*!< PTP master timer second */
+} enet_ptp_master_time_data_t;
+
+/*! @brief Defines the structure for the ENET PTP message data and timestamp data.*/
+typedef struct ENETMacPtpTsData
+{
+    uint8_t version;              /*!< PTP version*/
+    uint8_t sourcePortId[kEnetPtpSourcePortIdLen];/*!< PTP source port ID*/
+    uint16_t sequenceId;          /*!< PTP sequence ID*/
+    uint8_t messageType;          /*!< PTP message type*/
+    enet_mac_ptp_time_t timeStamp;/*!< PTP timestamp*/
+} enet_mac_ptp_ts_data_t;
+
+/*! @brief Defines the ENET PTP ring buffer structure for the PTP message timestamp store.*/
+typedef struct ENETMacPtpTsRing
+{
+    uint32_t front; /*!< The first index of the ring*/
+    uint32_t end;   /*!< The end index of the ring*/
+    uint32_t size;  /*!< The size of the ring*/
+    enet_mac_ptp_ts_data_t *ptpTsDataPtr;/*!< PTP message data structure*/
+} enet_mac_ptp_ts_ring_t;
+
+/*! @brief Defines the ENET packet for the PTP version2 message using the layer2 Ethernet frame.*/
+typedef struct ENETPtpL2packet
+{
+    uint8_t packet[kEnetMaxFrameDateSize]; /*!< Buffer for ptpv2 message*/
+    uint16_t length;                       /*!< PTP message length*/
+} enet_ptp_l2packet_t;
+
+/*! @brief Defines the ENET PTPv2 packet queue using the layer2 Ethernet frame.*/
+typedef struct ENETPtpL2queue
+{
+    enet_ptp_l2packet_t l2Packet[kEnetPtpL2bufferNumber]; /*!< PTP layer2 packet*/
+    uint16_t writeIdex;          /*!< Queue write index*/
+    uint16_t readIdx;            /*!< Queue read index*/
+} enet_ptp_l2queue_t;
+
+/*! @brief Defines the ENET PTP layer2 Ethernet frame structure.*/
+typedef struct ENETPtpL2Ethernet
+{
+    uint8_t *ptpMsg;     /*!< PTP message*/
+    uint16_t length;     /*!< Length of the PTP message*/
+    enetMacAddr hwAddr;  /*!< Destination hardware address*/
+} enet_ptp_l2_ethernet_t;
+
+/*! @brief Defines the ENET PTP buffer structure for all 1588 data.*/
+typedef struct ENETPrivatePtpBuffer
+{
+    enet_mac_ptp_ts_ring_t rxTimeStamp;/*!< Data structure for receive message*/
+    enet_mac_ptp_ts_ring_t txTimeStamp;/*!< Data structure for transmit timestamp*/
+    enet_ptp_l2queue_t *l2QueuePtr;    /*!< Data structure for layer2 Ethernet queue*/
+    uint64_t masterSecond;             /*!< PTP time second when it's master time*/
+} enet_private_ptp_buffer_t;
+#endif
+
+/*! @brief Defines the ENET header structure. */
+typedef struct ENETEthernetHeader
+{
+    enetMacAddr destAddr;  /*!< Destination address */
+    enetMacAddr sourceAddr;/*!< Source address*/
+    uint16_t type;         /*!< Protocol type*/
+} enet_ethernet_header_t;
+
+/*! @brief Defines the ENET VLAN frame header structure. */
+typedef struct ENET8021vlanHeader
+{
+    enetMacAddr destAddr;  /*!< Destination address */
+    enetMacAddr sourceAddr;/*!< Source address*/
+    uint16_t tpidtag;      /*!< ENET 8021tag header tag region*/
+    uint16_t othertag;     /*!< ENET 8021tag header type region*/
+    uint16_t type;         /*!< Protocol type*/
+} enet_8021vlan_header_t;
+
+/*! @brief Defines the ENET MAC context structure for the buffer address, buffer descriptor address, etc.*/
+typedef struct ENETMacContext
+{
+    uint8_t *rxBufferPtr;   /*!< Receive buffer pointer*/
+    uint8_t *rxLargeBufferPtr; /*!< Receive large buffer descriptor*/
+    uint8_t *txBufferPtr;   /*!< Transmit buffer pointer*/
+    uint8_t *rxBdBasePtr;   /*!< Receive buffer descriptor base address pointer*/
+    uint8_t *rxBdCurPtr;    /*!< Current receive buffer descriptor pointer*/
+    uint8_t *rxBdDirtyPtr;  /*!< Receive dirty buffer descriptor*/
+    uint8_t *txBdBasePtr;   /*!< Transmit buffer descriptor base address pointer*/
+    uint8_t *txBdCurPtr;    /*!< Current transmit buffer descriptor pointer*/
+    uint8_t *txBdDirtyPtr;  /*!< Last cleaned transmit buffer descriptor pointer*/
+    bool  isTxFull;         /*!< Transmit buffer descriptor full*/
+    bool  isRxFull;         /*!< Receive buffer descriptor full*/
+    uint32_t bufferdescSize;         /*!< ENET buffer descriptor size*/
+    uint16_t rxBufferSizeAligned;      /*!< Receive buffer alignment size*/
+#if FSL_FEATURE_ENET_SUPPORT_PTP
+    enet_private_ptp_buffer_t privatePtp;/*!< PTP private buffer*/
+#endif
+} enet_mac_context_t;
+
+/*! @brief Defines the ENET packets statistic structure.*/
+typedef struct ENETMacStats
+{
+    uint32_t statsRxTotal;   /*!< Total number of receive packets*/
+    uint32_t statsRxMissed;  /*!< Total number of receive packets*/
+    uint32_t statsRxDiscard; /*!< Receive discarded with error */
+    uint32_t statsRxError;   /*!< Receive discarded with error packets*/
+    uint32_t statsTxTotal;   /*!< Total number of transmit packets*/
+    uint32_t statsTxMissed;  /*!< Transmit missed*/
+    uint32_t statsTxDiscard; /*!< Transmit discarded with error */
+    uint32_t statsTxError;   /*!< Transmit error*/
+    uint32_t statsRxAlign;   /*!< Receive non-octet alignment*/
+    uint32_t statsRxFcs;     /*!< Receive CRC error*/
+    uint32_t statsRxTruncate;/*!< Receive truncate*/
+    uint32_t statsRxLengthGreater;  /*!< Receive length greater than RCR[MAX_FL] */
+    uint32_t statsRxCollision;      /*!< Receive collision*/
+    uint32_t statsRxOverRun;        /*!< Receive over run*/
+    uint32_t statsTxOverFlow;       /*!< Transmit overflow*/
+    uint32_t statsTxLateCollision;  /*!< Transmit late collision*/
+    uint32_t statsTxExcessCollision;/*!< Transmit excess collision*/
+    uint32_t statsTxUnderFlow;      /*!< Transmit under flow*/
+    uint32_t statsTxLarge;          /*!< Transmit large packet*/
+    uint32_t statsTxSmall;          /*!< Transmit small packet*/
+} enet_stats_t;
+
+/*! @brief Defines the ENET MAC packet buffer structure.*/
+typedef struct ENETMacPacketBuffer
+{
+    uint8_t *data;
+    uint16_t length;
+} enet_mac_packet_buffer_t;
+
+#if ENET_RECEIVE_ALL_INTERRUPT
+typedef uint32_t (* enet_netif_callback_t)(void *enetPtr, enet_mac_packet_buffer_t *packetBuffer);
+#endif
+
+/*! @brief Defines the ENET device data structure for the ENET.*/
+typedef struct ENETDevIf
+{
+    struct ENETDevIf *next; /*!< Next device structure address*/
+    void *netIfPtr;           /*!< Store the connected  upper layer in the structure*/
+#if ENET_RECEIVE_ALL_INTERRUPT
+    void *enetNetifService;   /*!< Service function*/
+#endif
+    enet_multicast_group_t *multiGroupPtr; /*!< Multicast group chain*/
+    uint32_t deviceNumber;    /*!< Device number*/
+    bool isInitialized;       /*!< Device initialized*/
+    uint16_t maxFrameSize;  /*!< MAC maximum frame size*/
+    enet_mac_config_t *macCfgPtr;/*!< MAC configuration structure*/
+    enet_phy_config_t *phyCfgPtr;/*!< PHY configuration structure*/
+    const struct ENETMacApi *macApiPtr;   /*!< MAC application interface structure*/
+    void *phyApiPtr;             /*!< PHY application interface structure*/
+    enet_mac_context_t *macContextPtr; /*!< MAC context pointer*/
+#if ENET_ENABLE_DETAIL_STATS
+    enet_stats_t stats;                /*!< Packets statistic*/
+#endif
+#if ENET_RECEIVE_ALL_INTERRUPT
+    enet_netif_callback_t  enetNetifcall;  /*!< Receive callback function to the upper layer*/
+#else
+    event_object_t enetReceiveSync;     /*!< Receive sync signal*/
+#endif
+    lock_object_t enetContextSync;     /*!< Sync signal*/
+} enet_dev_if_t;
+
+/*! @brief Defines the basic application for the ENET device.*/
+typedef struct ENETMacApi
+{
+    uint32_t (* enet_mac_init)(enet_dev_if_t * enetIfPtr, enet_rxbd_config_t *rxbdCfg, enet_txbd_config_t *txbdCfg);/*!< MAC initialize interface*/
+    uint32_t (* enet_mac_deinit)(enet_dev_if_t * enetIfPtr);/*!< MAC close interface*/
+    uint32_t (* enet_mac_send)(enet_dev_if_t * enetIfPtr, uint8_t *packet, uint32_t size);/*!< MAC send packets*/
+#if !ENET_RECEIVE_ALL_INTERRUPT
+    uint32_t (* enet_mac_receive)(enet_dev_if_t * enetIfPtr, enet_mac_packet_buffer_t *packBuffer);/*!< MAC receive interface*/
+#endif
+    uint32_t (* enet_mii_read)(uint32_t instance, uint32_t phyAddr, uint32_t phyReg, uint32_t *dataPtr);/*!< MII reads PHY*/
+    uint32_t (* enet_mii_write)(uint32_t instance, uint32_t phyAddr, uint32_t phyReg, uint32_t data);/*!< MII writes PHY*/
+    uint32_t (* enet_add_multicast_group)(uint32_t instance, enet_multicast_group_t *multiGroupPtr, uint8_t *groupAddr);/*!< Add multicast group*/
+    uint32_t (* enet_leave_multicast_group)(uint32_t instance, enet_multicast_group_t *multiGroupPtr, uint8_t *groupAddr);/*!< Leave multicast group*/
+} enet_mac_api_t;
+
+/*******************************************************************
+* Global variables
+ 
+***********************************************************************/
+extern const enet_mac_api_t g_enetMacApi;
+
+/*******************************************************************************
+ * API 
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*! 
+  * @name ENET Driver
+  * @{
+  */
+
+
+#if FSL_FEATURE_ENET_SUPPORT_PTP
+/*!
+ * @brief Initializes the ENET PTP context structure with the basic configuration.
+ *
+ * @param macContextPtr The pointer to the ENET MAC macContext structure.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_init(enet_private_ptp_buffer_t *privatePtpPtr, uint32_t ptpRxBufferNum, enet_mac_ptp_ts_data_t *ptpTsRxDataPtr, uint32_t ptpTxBufferNum, enet_mac_ptp_ts_data_t *ptpTsTxDataPtr);
+  
+/*!
+ * @brief Initializes the ENET PTP timer with the basic configuration.
+ *
+ * After the PTP starts, the 1588 timer also starts running. If the user wants the 1588 timer
+ * as the slave, enable the isSlaveEnabled flag.
+ *
+ * @param instance The ENET instance number.
+ * @param ptpCfgPtr The pointer to the basic PTP timer configuration structure.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_start(uint32_t instance, bool isSlaveEnabled);
+
+/*!
+ * @brief Parses the ENET packet. 
+ *
+ * Parses the ENET message and checks if it is a PTP message. If it is a PTP message,
+ * the message is stored in the PTP information structure. Message parsing 
+ * decides whether timestamp processing is done after that.
+ *
+ * @param packet The ENET packet.
+ * @param ptpTsPtr The pointer to the PTP data structure.
+ * @param isPtpMsg The PTP message flag.
+ * @param isFastEnabled The fast operation flag. If set, only check if it is a ptp message
+ *        and doesn't store any ptp message.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_parse(uint8_t *packet, enet_mac_ptp_ts_data_t *ptpTsPtr, bool *isPtpMsg, bool isFastEnabled);
+
+/*!
+ * @brief Gets the current value of the ENET PTP time.
+ *
+ * @param ptpTimerPtr The PTP timer structure.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_get_time(enet_mac_ptp_time_t *ptpTimerPtr);
+
+/*!
+ * @brief Sets the current value of the ENET PTP time.
+ *
+ * @param ptpTimerPtr The PTP timer structure.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_set_time(enet_mac_ptp_time_t *ptpTimerPtr);
+
+/*!
+ * @brief Adjusts the ENET PTP time.
+ *
+ * @param instance The ENET instance number.
+ * @param drift The PTP timer drift value.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_correction_time(uint32_t instance, int32_t drift);
+
+
+/*!
+ * @brief Stores the transmit timestamp.
+ *
+ * @param ptpBuffer The PTP buffer pointer.
+ * @param bdPtr The current transmit buffer descriptor.
+ * @return The execution status.
+ */	
+uint32_t enet_ptp_store_tx_timestamp(enet_private_ptp_buffer_t *ptpBuffer,void *bdPtr);
+
+/*!
+ * @brief Stores receive timestamp.
+ *
+ * @param ptpBuffer The PTP buffer pointer.
+ * @param packet The current receive packet.
+ * @param bdPtr The current receive buffer descriptor.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_store_rx_timestamp(enet_private_ptp_buffer_t *ptpBuffer, uint8_t *packet, void *bdPtr);
+
+/*!
+ * @brief Initializes the buffer queue for the PTP layer2 Ethernet packets.
+ *
+ * @param ptpBuffer The PTP buffer pointer.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_l2queue_init(enet_private_ptp_buffer_t *ptpBuffer, enet_ptp_l2queue_t *ptpL2QuePtr);
+
+/*!
+ * @brief Adds the PTP layer2 Ethernet packet to the PTP Ethernet packet queue.
+ *
+ * @param ptpQuePtr The ENET private ptp layer2 buffer queue structure pointer.
+ * @param packet The packet buffer pointer.
+ * @param length The packet length. 
+ * @return The execution status.
+ */
+uint32_t enet_ptp_service_l2packet(enet_ptp_l2queue_t * ptpQuePtr, uint8_t *packet, uint16_t length);
+
+/*!
+ * @brief Sends the PTP layer2 Ethernet packet to the Net.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param paramPtr The buffer from upper layer. 
+ * @return The execution status.
+ */
+uint32_t enet_ptp_send_l2packet(enet_dev_if_t * enetIfPtr, void *paramPtr);
+
+/*!
+ * @brief Receives the PTP layer2 Ethernet packet from the Net.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param paramPtr The buffer receive from net and will send to upper layer. 
+ * @return The execution status.
+ */
+uint32_t enet_ptp_receive_l2packet(enet_dev_if_t * enetIfPtr,void *paramPtr);
+
+/*!
+ * @brief Provides the handler for the 1588 stack to do PTP IOCTL.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param commandId The command id.
+ * @param inOutPtr The data buffer. 
+ * @return The execution status.
+ */
+uint32_t enet_ptp_ioctl(enet_dev_if_t * enetIfPtr, uint32_t commandId, void *inOutPtr);
+
+/*!
+ * @brief Stops the ENET PTP timer.
+ *
+ * @param instance The ENET instance number.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_stop(uint32_t instance);
+
+/*!
+ * @brief Checks whether the PTP ring buffer is full.
+ *
+ * @param ptpTsRingPtr The ENET PTP timestamp ring.
+ * @return True if the PTP ring buffer is full. Otherwise, false.
+ */
+bool enet_ptp_ring_is_full(enet_mac_ptp_ts_ring_t *ptpTsRingPtr);
+
+/*!
+ * @brief Updates the latest ring buffers.
+ *
+ * Adds the PTP message data to the PTP ring buffers and increases the 
+ * PTP ring buffer index.
+ *
+ * @param ptpTsRingPtr The ENET PTP timestamp ring.
+ * @param data The PTP data buffer.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_ring_update(enet_mac_ptp_ts_ring_t *ptpTsRingPtr, enet_mac_ptp_ts_data_t *data);
+
+/*!
+ * @brief Searches the element in ring buffers with the message ID and Clock ID.
+ *
+ * @param ptpTsRingPtr The ENET PTP timestamp ring.
+ * @param data The PTP data buffer.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_ring_search(enet_mac_ptp_ts_ring_t *ptpTsRingPtr, enet_mac_ptp_ts_data_t *data);
+
+/*!
+ * @brief Calculates the ENET PTP ring buffer index.
+ *
+ * @param size The ring size.
+ * @param curIdx The current ring index.
+ * @param offset The offset index.
+ * @return The execution status.
+ */
+static inline uint32_t enet_ptp_ring_index(uint32_t size, uint32_t curIdx, uint32_t offset)
+{
+    return ((curIdx + offset) % size);
+}
+
+/*!
+ * @brief Frees all ring buffers.
+ *
+ * @param enetContextPtr The ENET MAC context buffer.
+ * @return The execution status.
+ */
+uint32_t enet_ptp_deinit(enet_mac_context_t *enetContextPtr);
+
+/*!
+ * @brief The ENET PTP time interrupt handler.
+ *
+ * @param enetIfPtr The ENET context structure pointer.
+ */
+void enet_mac_ts_isr(void *enetIfPtr);
+#endif
+/*!
+ * @brief(R)MII Read function.
+ *
+ * @param instance The ENET instance number.
+ * @param phyAddr The PHY address.
+ * @param phyReg The PHY register.
+ * @param dataPtr The data read from MII.
+ * @return The execution status.
+ */
+uint32_t enet_mii_read(uint32_t instance, uint32_t phyAddr, uint32_t phyReg, uint32_t *dataPtr);
+
+/*!
+ * @brief(R)MII Read function.
+ *
+ * @param instance The ENET instance number.
+ * @param phyAddr The PHY address.
+ * @param phyReg The PHY register.
+ * @param data The data write to MII.
+ * @return The execution status.
+ */
+uint32_t enet_mii_write(uint32_t instance, uint32_t phyAddr, uint32_t phyReg, uint32_t data);
+
+/*!
+ * @brief Initializes  ENET buffer descriptors.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */
+uint32_t enet_mac_bd_init(enet_dev_if_t * enetIfPtr);
+
+/*!
+ * @brief Initializes the ENET MAC MII(MDC/MDIO) interface.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */
+uint32_t enet_mac_mii_init(enet_dev_if_t * enetIfPtr);
+
+/*!
+ * @brief Initialize the ENET receive buffer descriptors.
+ *
+ * If you open ENET_RECEIVE_ALL_INTERRUPT to do receive 
+ * data buffer numbers can be the same as the receive descriptor numbers. 
+ * But if you close ENET_RECEIVE_ALL_INTERRUPT and choose polling receive 
+ * frames please make sure the receive data buffers are more than 
+ * buffer descriptor numbers to guarantee a good performance.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param rxbdCfg The receive buffer descriptor configuration. 
+ * @return The execution status.
+ */
+uint32_t enet_mac_rxbd_init(enet_dev_if_t * enetIfPtr, enet_rxbd_config_t *rxbdCfg);
+
+/*!
+ * @brief Deinitialize the ENET receive buffer descriptors.
+ *
+ * Deinitialize the ENET receive buffer descriptors. 
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */ 
+
+uint32_t enet_mac_rxbd_deinit(enet_dev_if_t * enetIfPtr);
+
+/*!
+ * @brief Initialize the ENET transmit buffer descriptors.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param txbdCfg The transmit buffer descriptor configuration. 
+ * @return The execution status.
+ */
+uint32_t enet_mac_txbd_init(enet_dev_if_t * enetIfPtr, enet_txbd_config_t *txbdCfg);
+
+/*!
+ * @brief Deinitialize the ENET transmit buffer descriptors.
+ *
+ * Deinitialize the ENET transmit buffer descriptors. 
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */ 
+uint32_t enet_mac_txbd_deinit(enet_dev_if_t * enetIfPtr);
+
+/*!
+ * @brief Initializes ENET MAC FIFO and accelerator with the basic configuration.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */
+uint32_t enet_mac_configure_fifo_accel(enet_dev_if_t * enetIfPtr);
+
+/*!
+ * @brief the ENET controller with the basic configuration.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */
+uint32_t enet_mac_configure_controller(enet_dev_if_t * enetIfPtr);
+
+/*!
+ * @brief Deinit the ENET device.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */
+uint32_t enet_mac_deinit(enet_dev_if_t * enetIfPtr);
+
+#if !ENET_RECEIVE_ALL_INTERRUPT
+/*!
+ * @brief Updates the receive buffer descriptor.
+ *
+ * This updates the used receive buffer descriptor ring to
+ * ensure that the used BDS is correctly used again. It  cleans 
+ * the status region and sets the control region of the used receive buffer 
+ * descriptor. If the isBufferUpdate flag is set, the data buffer in the
+ * buffer descriptor is updated.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param isBufferUpdate The data buffer update flag.
+ * @return The execution status.
+ */
+uint32_t enet_mac_update_rxbd(enet_dev_if_t * enetIfPtr, bool isBufferUpdate);
+#else
+/*!
+ * @brief Updates the receive buffer descriptor.
+ *
+ * Clears the status region and sets the control region of the current receive buffer 
+ * descriptor to ensure that it is  used correctly again. It  increases the buffer 
+ * descriptor index to the next buffer descriptor.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */
+uint32_t enet_mac_update_rxbd(enet_dev_if_t * enetIfPtr);
+#endif
+/*!
+ * @brief Processes the ENET receive frame error statistics.
+ *
+ * This interface gets the error statistics of the received frame.
+ * Because the error information is in the last BD of a frame, this interface
+ * should be called when processing the last BD of a frame.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param data The current control and status data of the buffer descriptor.
+ * @return The frame error status.
+ *         - True if the frame has an error. 
+ *         - False if the frame does not have an error.
+ */
+bool enet_mac_rx_error_stats(enet_dev_if_t * enetIfPtr, uint32_t data);
+
+/*!
+ * @brief Processes the ENET transmit frame statistics.
+ *
+ * This interface gets the error statistics of the transmit frame.
+ * Because the error information is in the last BD of a frame, this interface
+ * should be called when processing the last BD of a frame.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param curBd The current buffer descriptor.
+ */
+void enet_mac_tx_error_stats(enet_dev_if_t * enetIfPtr,void *curBd);
+
+/*!
+ * @brief ENET transmit buffer descriptor cleanup.
+ *
+ * First, store the transmit frame error statistic and PTP timestamp of the transmitted packets. 
+ * Second, clean up the used transmit buffer descriptors.
+ * If the PTP 1588 feature is open, this interface  captures the 1588 timestamp. 
+ * It is called by the transmit interrupt handler.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */
+uint32_t enet_mac_tx_cleanup(enet_dev_if_t * enetIfPtr);
+#if !ENET_RECEIVE_ALL_INTERRUPT
+/*!
+ * @brief Receives ENET packets.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param packBuffer The received data buffer.
+ * @return The execution status.
+ */
+uint32_t enet_mac_receive(enet_dev_if_t * enetIfPtr, enet_mac_packet_buffer_t *packBuffer);
+#else
+/*!
+ * @brief Receives ENET packets.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @return The execution status.
+ */
+uint32_t enet_mac_receive(enet_dev_if_t * enetIfPtr);
+#endif
+/*!
+ * @brief Transmits ENET packets.
+ *
+ * @param enetIfPtr The ENET context structure.
+ * @param packet The frame to be transmitted.
+ * @param size The frame size.
+ * @return The execution status.
+ */
+uint32_t enet_mac_send(enet_dev_if_t * enetIfPtr, uint8_t *packet, uint32_t size);
+
+/*!
+ * @brief The ENET receive interrupt handler.
+ *
+ * @param enetIfPtr The ENET context structure pointer.
+ */
+void enet_mac_rx_isr(void *enetIfPtr);
+
+/*!
+ * @brief The ENET transmit interrupt handler.
+ *
+ * @param enetIfPtr The ENET context structure pointer.
+ */
+void enet_mac_tx_isr(void *enetIfPtr);
+
+/*!
+ * @brief Calculates the CRC hash value.
+ *
+ * @param address The ENET MAC hardware address.
+ * @param crcVlaue The calculated CRC value of the Mac address.
+ */
+void enet_mac_calculate_crc32(enetMacAddr address, uint32_t *crcValue);
+
+/*!
+ * @brief Adds the ENET device to a multicast group.
+ *
+ * @param instance The ENET instance number.
+ * @param multiGroupPtr The ENET multicast group structure.
+ * @param address The ENET MAC hardware address.
+ * @return The execution status.
+ */
+uint32_t enet_mac_add_multicast_group(uint32_t instance, enet_multicast_group_t *multiGroupPtr, enetMacAddr address);
+
+/*!
+ * @brief Moves the ENET device from a multicast group.
+ *
+ * @param instance The ENET instance number.
+ * @param multiGroupPtr The ENET multicast group structure.
+ * @param address The ENET MAC hardware address.
+ * @return The execution status.
+ */
+uint32_t enet_mac_leave_multicast_group(uint32_t instance, enet_multicast_group_t *multiGroupPtr, enetMacAddr address);
+
+/*!
+ * @brief Initializes the ENET with the basic configuration.
+ *
+ * @param enetIfPtr The pointer to the basic configuration structure.
+ * @return The execution status.
+ */
+uint32_t enet_mac_init(enet_dev_if_t * enetIfPtr, enet_rxbd_config_t *rxbdCfg,
+                            enet_txbd_config_t *txbdCfg);
+
+/*!
+ * @brief Enqueues a data buffer to the buffer queue.
+ *
+ * @param queue The buffer queue.
+ * @param buffer The buffer to add to the buffer queue.
+ */
+void enet_mac_enqueue_buffer( void **queue, void *buffer);
+
+/*!
+ * @brief Dequeues a buffer from the buffer queue.
+ *
+ * @param queue The buffer queue.
+ * @return The dequeued data buffer.
+ */
+void *enet_mac_dequeue_buffer( void **queue);
+
+/* @} */
+
+#if defined(__cplusplus)
+extern }
+#endif
+
+/*! @}*/
+
+#endif /* __FSL_ENET_DRIVER_H__ */
+/*******************************************************************************
+ * EOF
+ ******************************************************************************/
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/drivers/interrupt/fsl_interrupt_features.h	Mon Apr 28 17:39:05 2014 +0100
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2013 - 2014, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __FSL_INTERRUPT_FEATURES_H__
+#define __FSL_INTERRUPT_FEATURES_H__
+
+#if (defined(CPU_MKL25Z32VFM4) || defined(CPU_MKL25Z64VFM4) || defined(CPU_MKL25Z128VFM4) || \
+     defined(CPU_MKL25Z32VFT4) || defined(CPU_MKL25Z64VFT4) || defined(CPU_MKL25Z128VFT4) || \
+     defined(CPU_MKL25Z32VLH4) || defined(CPU_MKL25Z64VLH4) || defined(CPU_MKL25Z128VLH4) || \
+     defined(CPU_MKL25Z32VLK4) || defined(CPU_MKL25Z64VLK4) || defined(CPU_MKL25Z128VLK4))
+    #define FSL_FEATURE_INTERRUPT_IRQ_MAX (31)
+    #define FSL_FEATURE_INTERRUPT_IRQ_MIN (-14)
+#elif (defined(CPU_MK70FN1M0VMJ12) || defined(CPU_MK70FX512VMJ12) || \
+       defined(CPU_MK70FN1M0VMJ15) || defined(CPU_MK70FX512VMJ15))
+    #define FSL_FEATURE_INTERRUPT_IRQ_MAX (105)
+    #define FSL_FEATURE_INTERRUPT_IRQ_MIN (-14)
+#elif (defined(CPU_MK64FX512VDC12) || defined(CPU_MK64FN1M0VDC12) || defined(CPU_MK64FX512VLL12) || \
+    defined(CPU_MK64FN1M0VLL12) || defined(CPU_MK64FX512VLQ12) || defined(CPU_MK64FN1M0VLQ12) || \
+    defined(CPU_MK64FX512VMD12) || defined(CPU_MK64FN1M0VMD12))
+    #define FSL_FEATURE_INTERRUPT_IRQ_MAX (85)
+    #define FSL_FEATURE_INTERRUPT_IRQ_MIN (-14)
+#elif  (defined(CPU_MK22FN512VDC12))
+    #define FSL_FEATURE_INTERRUPT_IRQ_MAX (85)
+    #define FSL_FEATURE_INTERRUPT_IRQ_MIN (-14)
+#else
+    #error "No valid CPU defined"
+#endif
+
+#endif /* __FSL_INTERRUPT_FEATURES_H__*/
+/*******************************************************************************
+ * EOF
+ ******************************************************************************/
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/drivers/interrupt/fsl_interrupt_manager.h	Mon Apr 28 17:39:05 2014 +0100
@@ -0,0 +1,142 @@
+/*
+ * Copyright (c) 2013 - 2014, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#if !defined(__FSL_INTERRUPT_MANAGER_H__)
+#define __FSL_INTERRUPT_MANAGER_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <assert.h>
+#include "fsl_interrupt_features.h"
+#include "device/fsl_device_registers.h"
+
+/*! @addtogroup interrupt_manager*/
+/*! @{*/
+
+/*! @file*/
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*! @name interrupt_manager APIs*/
+/*@{*/
+
+/*!
+ * @brief Installs an interrupt handler routine for a given IRQ number. 
+ *
+ * This function lets the application  register/replace the interrupt 
+ * handler for a specified IRQ number. The IRQ number is different than the vector
+ * number. IRQ 0  starts from the vector 16 address. See a chip-specific reference
+ * manual for details and the  startup_MKxxxx.s file for each chip
+ * family to find out the default interrupt handler for each device. This
+ * function converts the IRQ number to the vector number by adding 16 to
+ * it. 
+ *
+ * @param irqNumber IRQ number
+ * @param handler   Interrupt handler routine address pointer
+ */
+void interrupt_register_handler(IRQn_Type irqNumber, void (*handler)(void));
+
+/*!
+ * @brief Enables an interrupt for a given IRQ number. 
+ *
+ * This function  enables the individual interrupt for a specified IRQ
+ * number. It calls the system NVIC API to access the interrupt control
+ * register. The input IRQ number does not include the core interrupt, only
+ * the peripheral interrupt, from 0 to a maximum supported IRQ.
+ *
+ * @param irqNumber IRQ number
+ */
+static inline void interrupt_enable(IRQn_Type irqNumber)
+{
+    /* check IRQ number */
+    assert(0 <= irqNumber);
+    assert(irqNumber <= FSL_FEATURE_INTERRUPT_IRQ_MAX);
+
+    /* call core API to enable the IRQ*/
+    NVIC_EnableIRQ(irqNumber);
+}
+
+/*!
+ * @brief Disables an interrupt for a given IRQ number. 
+ *
+ * This function  enables the individual interrupt for a specified IRQ
+ * number. It  calls the system NVIC API to access the interrupt control
+ * register.
+ *
+ * @param irqNumber IRQ number
+ */
+static inline void interrupt_disable(IRQn_Type irqNumber)
+{
+    /* check IRQ number */
+    assert(0 <= irqNumber);
+    assert(irqNumber <= FSL_FEATURE_INTERRUPT_IRQ_MAX);
+
+    /* call core API to disable the IRQ*/
+    NVIC_DisableIRQ(irqNumber);
+}
+
+/*!
+ * @brief Enables system interrupt.
+ *
+ * This function  enables the global interrupt by calling the core API.
+ *
+ */
+void interrupt_enable_global(void);
+
+/*!
+ * @brief Disable system interrupt. 
+ *
+ * This function  disables the global interrupt by calling the core API.
+ *
+ */
+void interrupt_disable_global(void);
+
+/*@}*/
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*! @}*/
+
+#endif /* __FSL_INTERRUPT_MANAGER_H__*/
+/*******************************************************************************
+ * EOF
+ ******************************************************************************/
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/drivers/pit/fsl_pit_driver.h	Mon Apr 28 17:39:05 2014 +0100
@@ -0,0 +1,240 @@
+/*
+ * Copyright (c) 2013 - 2014, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __FSL_PIT_DRIVER_H__
+#define __FSL_PIT_DRIVER_H__
+ 
+#include <stdint.h>
+#include <stdbool.h>
+#include "fsl_pit_hal.h"
+ 
+/*!
+ * @addtogroup pit_driver
+ * @{
+ */
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*!
+ * @brief PIT timer configuration structure
+ *
+ * Define structure PitConfig and use pit_init_channel() to make necessary
+ * initializations. You may also use remaining functions for PIT configuration.
+ *
+ * @note the timer chain feature is not valid in all devices, please check 
+ * fsl_pit_features.h for accurate setting. If it's not valid, the value set here
+ * will be bypassed inside function pit_init_channel(). 
+ */
+typedef struct PitUserConfig {
+    bool isInterruptEnabled;  /*!< Timer interrupt 0-disable/1-enable*/
+    bool isTimerChained;      /*!< Chained with previous timer, 0-not/1-chained*/
+    uint32_t periodUs;        /*!< Timer period in unit of microseconds*/
+} pit_user_config_t;
+
+/*! @brief PIT ISR callback function typedef */
+typedef void (*pit_isr_callback_t)(void);
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+ 
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @name Initialize and Shutdown
+ * @{
+ */
+
+/*!
+ * @brief Initialize PIT module.
+ * 
+ * This function must be called before calling all the other PIT driver functions.
+ * This function un-gates the PIT clock and enables the PIT module. The isRunInDebug
+ * passed into function will affect all timer channels. 
+ *
+ * @param isRunInDebug Timers run or stop in debug mode.
+ *        - true:  Timers continue to run in debug mode.
+ *        - false: Timers stop in debug mode.
+ */
+void pit_init_module(bool isRunInDebug);
+
+/*!
+ * @brief Initialize PIT channel.
+ * 
+ * This function initialize PIT timers by channel. Pass in timer number and its
+ * config structure. Timers do not start counting by default after calling this
+ * function. Function pit_timer_start must be called to start timer counting. 
+ * Call pit_set_timer_period_us to re-set the period.
+ *
+ * Here is an example demonstrating how to define a PIT channel config structure:
+   @code
+   pit_user_config_t pitTestInit = {
+        .isInterruptEnabled = true,
+        // Only takes effect when chain feature is available.
+        // Otherwise, pass in arbitrary value(true/false).
+        .isTimerChained = false, 
+        // In unit of microseconds.
+        .periodUs = 1000,
+   };
+   @endcode
+ *
+ * @param timer Timer channel number.
+ * @param config PIT channel configuration structure.
+ */
+void pit_init_channel(uint32_t timer, const pit_user_config_t * config);
+
+/*!
+ * @brief Disable PIT module and gate control.
+ *
+ * This function disables all PIT interrupts and PIT clock. It then gates the
+ * PIT clock control. pit_init_module must be called if you want to use PIT again.
+ */
+void pit_shutdown(void);
+
+/* @} */
+
+/*!
+ * @name Timer Start and Stop 
+ * @{
+ */
+
+/*!
+ * @brief Start timer counting.
+ *
+ * After calling this function, timers load period value, count down to 0 and
+ * then load the respective start value again. Each time a timer reaches 0,
+ * it generates a trigger pulse and sets the timeout interrupt flag.
+ *
+ * @param timer Timer channel number.
+ */
+void pit_timer_start(uint32_t timer);
+
+/*!
+ * @brief Stop timer counting.
+ *
+ * This function stops every timer counting. Timers reload their periods
+ * respectively after the next time they call pit_timer_start.
+ *
+ * @param timer Timer channel number.
+ */
+void pit_timer_stop(uint32_t timer);
+
+/* @} */
+
+/*!
+ * @name Timer Period
+ * @{
+ */
+
+/*!
+ * @brief Set timer period in microsecond units.
+ *
+ * The period range depends on the frequency of PIT source clock. If the required period
+ * is out of range, use the lifetime timer, if applicable. 
+ * 
+ * @param timer Timer channel number.
+ * @param us Timer period in microseconds.
+ */
+void pit_set_timer_period_us(uint32_t timer, uint32_t us);
+
+/*!
+ * @brief Read current timer value in microsecond units.
+ * 
+ * This function returns an absolute time stamp in microsecond units.
+ * One common use of this function is to measure the running time of a part of
+ * code. Call this function at both the beginning and end of code; the time
+ * difference between these two time stamps is the running time (Make sure the 
+ * running time will not exceed the timer period). The time stamp returned is
+ * up-counting.
+ *
+ * @param timer Timer channel number.
+ * @return Current timer value in microseconds.
+ */
+uint32_t pit_read_timer_us(uint32_t timer);
+
+#if FSL_FEATURE_PIT_HAS_LIFETIME_TIMER
+/*!
+ * @brief Set lifetime timer period.
+ * 
+ * Timer 1 must be chained with timer 0 before using the lifetime timer. The period
+ * range is restricted by "period * pitSourceClock < max of an uint64_t integer",
+ * or it may cause an overflow and be unable to set the correct period.
+ *
+ * @param period Lifetime timer period in microseconds.
+ */
+void pit_set_lifetime_timer_period_us(uint64_t us);
+
+/*!
+ * @brief Read current lifetime value in microseconds.
+ *
+ * This feature returns an absolute time stamp in microsecond units. The time stamp 
+ * value will not exceed the timer period. The timer is up-counting.
+ *
+ * @return Current lifetime timer value in microseconds.
+ */
+uint64_t pit_read_lifetime_timer_us(void);
+#endif /*FSL_FEATURE_PIT_HAS_LIFETIME_TIMER*/
+
+/* @} */
+
+/*!
+ * @name ISR Callback Function 
+ * @{
+ */
+
+/*!
+ * @brief Register pit isr callback function. 
+ *
+ * System default ISR interfaces are already defined in fsl_pit_irq.c. Users 
+ * can either edit these ISRs or use this function to register a callback
+ * function. The default ISR runs the callback function if there is one
+ * installed.
+ *
+ * @param timer    Timer channel number.
+ * @param function Pointer to pit isr callback function.
+ */
+void pit_register_isr_callback_function(uint32_t timer, pit_isr_callback_t function);
+
+/* @} */
+
+#if defined(__cplusplus)
+}
+#endif
+ 
+/*! @}*/
+ 
+#endif /* __FSL_PIT_DRIVER_H__*/
+/*******************************************************************************
+ * EOF
+ ******************************************************************************/
+

--- a/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/enet/fsl_enet_features.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/enet/fsl_enet_features.h	Mon Apr 28 17:39:05 2014 +0100
@@ -31,13 +31,18 @@
 #define __FSL_ENET_FEATURES_H__
 
 
-#if defined(CPU_MK63FN1M0VMD12) || defined(CPU_MK63FN1M0VMD12WS) || defined(CPU_MK64FN1M0VMD12) || defined(CPU_MK64FX512VMD12)
-    #define FSL_FEATURE_ENET_DMA_BIG_ENDIAN_ONLY             (1)
+#if defined(CPU_MK63FN1M0VMD12) || defined(CPU_MK63FN1M0VMD12WS)
+  #define FSL_FEATURE_ENET_DMA_BIG_ENDIAN_ONLY             (1)
+	#define FSL_FEATURE_ENET_SUPPORT_PTP                     (0)
+	#define FSL_FEATURE_ENET_INTERRUPT_COUNT                 (4)
+	#define FSL_FEATURE_ENET_PTP_TIMER_CHANNEL_INTERRUPT     (0)
+#elif  defined(CPU_MK64FN1M0VMD12) || defined(CPU_MK64FX512VMD12)
+  #define FSL_FEATURE_ENET_DMA_BIG_ENDIAN_ONLY             (0)
 	#define FSL_FEATURE_ENET_SUPPORT_PTP                     (0)
 	#define FSL_FEATURE_ENET_INTERRUPT_COUNT                 (4)
 	#define FSL_FEATURE_ENET_PTP_TIMER_CHANNEL_INTERRUPT     (0)
 #elif defined(CPU_MK70FN1M0VMJ12)
-    #define FSL_FEATURE_ENET_DMA_BIG_ENDIAN_ONLY             (1)
+  #define FSL_FEATURE_ENET_DMA_BIG_ENDIAN_ONLY             (1)
 	#define FSL_FEATURE_ENET_SUPPORT_PTP                     (0)
 	#define FSL_FEATURE_ENET_INTERRUPT_COUNT                 (4)
 #else

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/utilities/fsl_os_abstraction.h	Mon Apr 28 17:39:05 2014 +0100
@@ -0,0 +1,572 @@
+/*
+ * Copyright (c) 2013 - 2014, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#if !defined(__FSL_OS_ABSTRACTION_H__)
+#define __FSL_OS_ABSTRACTION_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <stdlib.h>
+
+#if defined __CC_ARM
+#define inline      __inline
+#endif
+
+/*!
+ * @addtogroup os_abstraction
+ * @{
+ */
+
+/*! @brief Status values to be returned by functions. */
+typedef enum
+{
+    kSuccess = 0,  /*!< Functions work correctly.                   */
+    kError,        /*!< Functions work failed.                      */
+    kTimeout,      /*!< Timeout occurs while waiting for an object. */
+    kIdle          /*!< Can not get the object in non-blocking mode.*/
+}fsl_rtos_status;
+
+/*! @brief The event flags are set or not.*/
+typedef enum
+{
+    kFlagNotSet = 0, /*!< The flags checked are set.     */
+    kFlagSet         /*!< The flags checked are not set. */
+}event_status;
+
+/*! @brief The event flags are cleared automatically or manually.*/
+typedef enum
+{
+    kEventAutoClr = 0, /*!< The flags of the event will be cleared automatically. */
+    kEventManualClr    /*!< The flags of the event will be cleared manually.      */
+}event_clear_type;
+
+// Temporary "fix", until the proper macros are integrated in the on-line build system
+#define FSL_RTOS_MBED
+
+/* Include required header file based on RTOS selection */
+#if defined (FSL_RTOS_MQX)
+    /*! @brief Macro to set message queue copy messages to internal memory or not. */
+    #define __FSL_RTOS_MSGQ_COPY_MSG__  1
+    #include "fsl_os_abstraction_mqx.h"
+
+#elif defined (FSL_RTOS_FREE_RTOS)
+    #define __FSL_RTOS_MSGQ_COPY_MSG__  1
+    #include "fsl_os_abstraction_free_rtos.h"
+
+#elif defined (FSL_RTOS_UCOSII)
+    #define __FSL_RTOS_MSGQ_COPY_MSG__  1
+    #include "fsl_os_abstraction_ucosii.h"
+
+#elif defined (FSL_RTOS_UCOSIII)
+    #define __FSL_RTOS_MSGQ_COPY_MSG__  1
+    #include "fsl_os_abstraction_ucosiii.h"
+
+#elif defined (FSL_RTOS_CMSIS)
+    #define __FSL_RTOS_MSGQ_COPY_MSG__  0
+    #include "fsl_os_abstraction_cmsis.h"
+
+#elif defined (FSL_RTOS_MBED)
+    #define __FSL_RTOS_MSGQ_COPY_MSG__  1
+    #include "fsl_os_abstraction_mbed.h"
+
+#else
+    #define __FSL_RTOS_MSGQ_COPY_MSG__  1
+    #include "fsl_os_abstraction_bm.h"
+#endif
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @name Synchronization
+ * @{
+ */
+
+/*!
+ * @brief Initialize a synchronization object to a given state.
+ *
+ * @param obj The sync object to initialize.
+ * @param initValue The initial value the object will be set to.
+ * 
+ * @retval kSuccess The object was successfully created.
+ * @retval kError Invalid parameter or no more objects can be created.
+ */
+fsl_rtos_status sync_create(sync_object_t *obj, uint8_t initValue);
+
+/*!
+ * @brief Wait for the synchronization object.
+ *
+ * This function checks the sync object's counting value, if it is
+ * positive, decreases it and returns kSuccess, otherwise, timeout will be
+ * used for wait.
+ *
+ * @param obj Pointer to the synchronization object.
+ * @param timeout The maximum number of milliseconds to wait for the object to be signalled.
+ *      Pass the #kSyncWaitForever constant to wait indefinitely for someone to signal the object.
+ *      A value of 0 should not be passed to this function. Instead, use sync_poll for
+ *      a non blocking check.
+ *
+ * @retval kSuccess The object was signalled.
+ * @retval kTimeout A timeout occurred.
+ * @retval kError An incorrect parameter was passed.
+ * @retval kIdle The object has not been signalled.
+ *
+ * @note There could be only one process waiting for the object at the same time.
+ */
+fsl_rtos_status sync_wait(sync_object_t *obj, uint32_t timeout);
+
+/*!
+ * @brief Checks a synchronization object's status.
+ *
+ * This function is used to poll a sync object's status.
+ * If the sync object's counting value is positive, decrease it and return
+ * kSuccess. If the object's counting value is 0, the function will
+ * return kIdle immediately
+ *
+ * @param obj The synchronization object.
+ *
+ * @retval kSuccess The object was signalled.
+ * @retval kIdle The object was not signalled.
+ * @retval kError An incorrect parameter was passed.
+ */
+fsl_rtos_status sync_poll(sync_object_t *obj);
+
+/*!
+ * @brief Signal for someone waiting on the synchronization object to wake up.
+ *
+ * This function should not be called from an ISR.
+ *
+ * @param obj The synchronization object to signal.
+ * 
+ * @retval kSuccess The object was successfully signaled.
+ * @retval kError The object can not be signaled or invalid parameter.
+ */
+fsl_rtos_status sync_signal(sync_object_t *obj);
+
+/*!
+ * @brief Signal for someone waiting on the synchronization object to wake up.
+ *
+ * This function should only be called from an ISR.
+ *
+ * @param obj The synchronization object to signal.
+ * 
+ * @retval kSuccess The object was successfully signaled.
+ * @retval kError The object can not be signaled or invalid parameter.
+ */
+fsl_rtos_status sync_signal_from_isr(sync_object_t *obj);
+
+/*!
+ * @brief Destroy a previously created synchronization object.
+ *
+ * @param obj The synchronization object to destroy.
+ * 
+ * @retval kSuccess The object was successfully destroyed.
+ * @retval kError Object destruction failed.
+ */
+fsl_rtos_status sync_destroy(sync_object_t *obj);
+
+/* @} */
+
+/*!
+ * @name Resource locking
+ * @{
+ */
+
+/*!
+ * @brief Initialize a locking object.
+ *
+ * @param obj The lock object to initialize.
+ *
+ * @retval kSuccess The lock is created successfully.
+ * @retval kError Tke lock creation failed.
+ */
+fsl_rtos_status lock_create(lock_object_t *obj);
+
+/*!
+ * @brief Wait for the object to be unlocked and lock it.
+ *
+ * This function will wait for some time or wait forever if could not get the lock.
+ *
+ * @param obj The locking object.
+ * @param timeout The maximum number of milliseconds to wait for the mutex.
+ *      Pass the #kSyncWaitForever constant to wait indefinitely for someone to unlock the object.
+ *      A value of 0 should not be passed to this function. Instead, use lock_poll for a non
+ *      blocking check.
+ *
+ * @retval kSuccess The lock was obtained.
+ * @retval kTimeout A timeout occurred.
+ * @retval kError An incorrect parameter was passed.
+ */
+fsl_rtos_status lock_wait(lock_object_t *obj, uint32_t timeout);
+
+/*!
+ * @brief Checks if a locking object can be locked and locks it if possible.
+ *
+ * This function returns instantly if could not get the lock.
+ *
+ * @param obj The locking object.
+ *
+ * @retval kSuccess The lock was obtained.
+ * @retval kIdle The lock could not be obtained.
+ * @retval kError An incorrect parameter was passed.
+ *
+ * @note There could be only one process waiting for the object at the same time.
+ * For RTOSes, wait for a lock recursively by one task is not supported.
+ *
+ */
+fsl_rtos_status lock_poll(lock_object_t *obj);
+
+/*!
+ * @brief Unlock a previously locked object.
+ *
+ * @param obj The locking object to unlock.
+ * 
+ * @retval kSuccess The object was successfully unlocked.
+ * @retval kError The object can not be unlocked or invalid parameter.
+ */
+fsl_rtos_status lock_release(lock_object_t *obj);
+
+/*!
+ * @brief Destroy a previously created locking object.
+ *
+ * @param obj The locking object to destroy.
+ * 
+ * @retval kSuccess The object was successfully destroyed.
+ * @retval kError Object destruction failed.
+ */
+fsl_rtos_status lock_destroy(lock_object_t *obj);
+
+/* @} */
+
+/*!
+ * @name Event signaling
+ * @{
+ */
+
+/*!
+ * @brief Initializes the event object.
+ *
+ * When the object is created, the flags is 0.
+ *
+ * @param obj Pointer to the event object to initialize.
+ * @param clearType The event is auto-clear or manual-clear.
+ *
+ * @retval kSuccess The object was successfully created.
+ * @retval kError Incorrect parameter or no more objects can be created.
+ */
+fsl_rtos_status event_create(event_object_t *obj, event_clear_type clearType);
+
+/*!
+ * @brief Wait for any event flags to be set.
+ *
+ * This function will wait for some time or wait forever if no flags are set. Any flags set
+ * will wake up the function.
+ *
+ * @param obj The event object.
+ * @param timeout The maximum number of milliseconds to wait for the event.
+ *      Pass the #kSyncWaitForever constant to wait indefinitely. A value of 0 should not be passed 
+ *      to this function.
+ * @param setFlags Pointer to receive the flags that were set.
+ *
+ * @retval kSuccess An event was set.
+ * @retval kTimeout A timeout occurred.
+ * @retval kError An incorrect parameter was passed.
+ */
+fsl_rtos_status event_wait(event_object_t *obj, uint32_t timeout, event_group_t *setFlags);
+
+/*!
+ * @brief Set one or more event flags of an event object.
+ *
+ * This function should not be called from an ISR.
+ *
+ * @param obj The event object.
+ * @param flags Event flags to be set.
+ *
+ * @retval kSuccess The flags were successfully set.
+ * @retval kError An incorrect parameter was passed.
+ *
+ * @note There could be only one process waiting for the event.
+ *
+ */
+fsl_rtos_status event_set(event_object_t *obj, event_group_t flags);
+
+/*!
+ * @brief Set one or more event flags of an event object.
+ *
+ * This function should only be called from an ISR.
+ *
+ * @param obj The event object.
+ * @param flags Event flags to be set.
+ *
+ * @retval kSuccess The flags were successfully set.
+ * @retval kError An incorrect parameter was passed.
+ */
+fsl_rtos_status event_set_from_isr(event_object_t *obj, event_group_t flags);
+
+/*!
+ * @brief Clear one or more events of an event object.
+ *
+ * This function should not be called from an ISR.
+ *
+ * @param obj The event object.
+ * @param flags Event flags to be clear.
+ *
+ * @retval kSuccess The flags were successfully cleared.
+ * @retval kError An incorrect parameter was passed.
+ */
+fsl_rtos_status event_clear(event_object_t *obj, event_group_t flags);
+
+/*!
+ * @brief Check the flags are set or not.
+ *
+ * @param obj The event object.
+ * @param flag The flag to check.
+ *
+ * @retval kFlagsSet The flags checked are set.
+ * @retval kFlagsNotSet The flags checked are not set or got an error.
+ */
+event_status event_check_flags(event_object_t *obj, event_group_t flag);
+
+/*!
+ * @brief Destroy a previously created event object.
+ *
+ * @param obj The event object to destroy.
+ * 
+ * @retval kSuccess The object was successfully destroyed.
+ * @retval kError Event destruction failed.
+ */
+fsl_rtos_status event_destroy(event_object_t *obj);
+/* @} */
+
+/*!
+ * @name Thread management
+ * @{
+ */
+
+/*!
+ * @brief Create a task.
+ *
+ * This function is wrapped by the macro task_create. Generally, this function is for
+ * internal use only, applications must use FSL_RTOS_TASK_DEFINE to define resources for
+ * task statically then use task_create to create task. If applications have prepare
+ * the resouces for task dynamically, they can use this function to create the task.
+ *
+ * @param task The task function.
+ * @param name The name of this task.
+ * @param stackSize The stack size in byte.
+ * @param stackMem Pointer to the stack. For bare metal, MQX and FreeRTOS, this could be NULL.
+ * @param priority Initial priority of the task.
+ * @param param Pointer to be passed to the task when it is created.
+ * @param usesFloat This task will use float register or not.
+ * @param handler Pointer to the task handler.
+ *
+ * @retval kSuccess The task was successfully created.
+ * @retval kError The task could not be created.
+ *
+ * @note Different tasks can not use the same task function.
+ */
+fsl_rtos_status __task_create(task_t task, uint8_t *name, uint16_t stackSize,
+                              task_stack_t *stackMem, uint16_t priority,
+                              void *param, bool usesFloat, task_handler_t *handler);
+
+/*!
+ * @brief Destroy a previously created task.
+ * @note Depending on the RTOS, task resources may or may not be automatically freed,
+ *       and this function may not return if the current task is destroyed.
+ *
+ * @param handler The handler of the task to destroy. Returned by the task_create function.
+ * 
+ * @retval kSuccess The task was successfully destroyed.
+ * @retval kError Task destruction failed or invalid parameter.
+ */
+fsl_rtos_status task_destroy(task_handler_t handler);
+/* @} */
+
+/*!
+ * @name Message queues
+ * @{
+ */
+
+/*!
+ * @brief Initialize the message queue.
+ *
+ * This function will initialize the message queue that declared previously.
+ * Here is an example demonstrating how to use:
+   @code
+   msg_queue_handler_t handler;
+   MSG_QUEUE_DECLARE(my_message, msg_num, msg_size);
+   handler = msg_queue_create(&my_message, msg_num, msg_size);
+   @endcode
+ *
+ * @param queue The queue declared through the MSG_QUEUE_DECLARE macro.
+ * @param number The number of elements in the queue.
+ * @param size Size of every elements in words.
+ * 
+ * @retval Handler to access the queue for put and get operations. If message queue
+ *         created failed, return 0.
+ */
+msg_queue_handler_t msg_queue_create(msg_queue_t *queue, uint16_t number, uint16_t size);
+
+/*!
+ * @brief Introduce an element at the tail of the queue.
+ *
+ * @param handler Queue handler returned by the msg_queue_create function.
+ * @param item Pointer to the element to be introduced in the queue.
+ * 
+ * @retval kSuccess Element successfully introduced in the queue.
+ * @retval kError The queue was full or an invalid parameter was passed.
+ */
+fsl_rtos_status msg_queue_put(msg_queue_handler_t handler, msg_queue_item_t item);
+
+/*!
+ * @brief Read and remove an element at the head of the queue.
+ *
+ * @param handler Queue handler returned by the msg_queue_create function.
+ * @param item Pointer to store a pointer to the element of the queue.
+ * @param timeout In case the queue is empty, the number of milliseconds to
+ *        wait for an element to be introduced into the queue. Use 0 to return
+ *        immediately or #kSyncWaitForever to wait indefinitely.
+ * 
+ * @retval kSuccess Element successfully obtained from the queue.
+ * @retval kTimeout If a timeout was specified, the queue remained empty after timeout.
+ * @retval kError The queue was empty or the handler was invalid.
+ * @retval kIdle The queue was empty and the timeout has not expired.
+ *
+ * @note There should be only one process waiting on the queue.
+ */
+fsl_rtos_status msg_queue_get(msg_queue_handler_t handler,
+                              msg_queue_item_t   *item,
+                              uint32_t            timeout);
+
+/*!
+ * @brief Discards all elements in the queue and leaves the queue empty.
+ *
+ * @param handler Queue handler returned by the msg_queue_create function.
+ * 
+ * @retval kSuccess Queue successfully emptied.
+ * @retval kError Emptying queue failed.
+ */
+fsl_rtos_status msg_queue_flush(msg_queue_handler_t handler);
+
+/*!
+ * @brief Destroy a previously created queue.
+ *
+ * @param handler Queue handler returned by the msg_queue_create function.
+ * 
+ * @retval kSuccess The queue was successfully destroyed.
+ * @retval kError Message queue destruction failed.
+ */
+fsl_rtos_status msg_queue_destroy(msg_queue_handler_t handler);
+
+/* @} */
+
+#ifndef FSL_RTOS_MBED
+/*!
+ * @name Memory Management
+ * @{
+ */
+
+/*!
+ * @brief Reserves the requested amount of memory in bytes.
+ *
+ * @param size Amount of bytes to reserve.
+ *
+ * @retval Pointer to the reserved memory. NULL if memory could not be allocated.
+ */
+void * mem_allocate(size_t size);
+
+/*!
+ * @brief Reserves the requested amount of memory in bytes and initializes it to 0.
+ *
+ * @param size Amount of bytes to reserve.
+ *
+ * @retval Pointer to the reserved memory. NULL if memory could not be allocated.
+ */
+void * mem_allocate_zero(size_t size);
+
+/*!
+ * @brief Releases the memory previously reserved.
+ *
+ * @param ptr Pointer to the start of the memory block previously reserved.
+ *
+ * @retval kSuccess Memory correctly released.
+ */
+fsl_rtos_status mem_free(void *ptr);
+#endif
+
+/* @} */
+
+/*!
+ * @name Time management
+ * @{
+ */
+
+/*!
+ * @brief Delays execution for a number of milliseconds.
+ *
+ * @param delay The time in milliseconds to wait.
+ */
+void time_delay(uint32_t delay);
+
+/* @} */
+
+/*!
+ * @name Interrupt management
+ * @{
+ */
+
+/*!
+ * @brief Install interrupt handler.
+ *
+ * @param irqNumber IRQ number of the interrupt.
+ * @param handler The interrupt handler to install.
+ *
+ * @retval kSuccess Handler is installed successfully.
+ * @retval kSuccess Handler could not be installed.
+ */
+fsl_rtos_status interrupt_handler_register(int32_t irqNumber, void (*handler)(void));
+
+/* @} */
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*! @}*/
+
+#endif /* __FSL_OS_ABSTRACTION_H__ */
+/*******************************************************************************
+ * EOF
+ ******************************************************************************/
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/utilities/fsl_os_abstraction_mbed.h	Mon Apr 28 17:39:05 2014 +0100
@@ -0,0 +1,38 @@
+/* fsl_os_mbed_abstraction.h */
+/* Copyright (C) 2012 mbed.org, MIT License
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+ * and associated documentation files (the "Software"), to deal in the Software without restriction,
+ * including without limitation the rights to use, copy, modify, merge, publish, distribute,
+ * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all copies or
+ * substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+ * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef FSL_OS_ABSTRACTION_MBED_H_
+#define FSL_OS_ABSTRACTION_MBED_H_
+
+// This is not really an "abstraction", but rather a set of quick&dirty
+// defines to allow the KSDK to compile. Currently, this is relevant only
+// in the context of the ENET driver (fsl_enet_driver.c)
+
+typedef int event_object_t;
+typedef int lock_object_t;
+typedef void sync_object_t;
+typedef unsigned int event_group_t;
+typedef int task_t;
+typedef void task_stack_t;
+typedef int task_handler_t;
+typedef int msg_queue_handler_t;
+typedef void msg_queue_t;
+typedef int msg_queue_item_t;
+
+#endif // #ifdef FSL_OS_ABSTRACTION_MBED_H_

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/utilities/sw_timer.h	Mon Apr 28 17:39:05 2014 +0100
@@ -0,0 +1,191 @@
+/*
+ * Copyright (c) 2013 - 2014, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#if !defined(__SW_TIMER_H__)
+#define __SW_TIMER_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/*! @addtogroup sw_timer Software Timer
+ * @brief This module is used to interface with Abstract Timer HAL to generate periodical timeouts
+ * required through different modules of the AOA protocol. This block will be based on 1ms
+ * ticks for all the timeout calculations. The HAL Interface block used to communicate with
+ * this must have the same 1ms timeout configured. This module can generate different
+ * software timer channels based on the same 1ms.
+ */
+/*! @{*/
+
+/*! Definition of the possible status of a software channel timer. */
+typedef enum SwTimerChannelStatus
+{
+    kSwTimerChannelExpired       = 0x00, /*!< Indicates the timer channel has counted the given ms*/
+    kSwTimerChannelStillCounting = 0x01, /*!< Indicates the timeout of the channel has not expired
+                                              and the timer is still counting.*/
+    kSwTimerChannelIsDisable     = 0x02, /*!< Indicates the timer channel is not reserved. */
+    kSwTimerChannelNotAvailable  = 0xFF  /*!< Indicates there are not available channels to reserve
+                                              or the requested channel is not available.*/
+}sw_timer_channel_status_t;
+
+/*! List of status and errors. */
+enum _sw_timer_errors
+{
+    kSwTimerStatusSuccess,           /*!< The execution was successful.*/
+    kSwTimerStatusFail,              /*!< The execution failed.*/
+    kSwTimerStatusInvalidChannel     /*!< The given channel is not valid. Valid channels are 0 to
+                                          (SW_TIMER_NUMBER_CHANNELS - 1). */
+};
+
+/*!
+ * Data type of the counter of each timer channel. If it is an int8_t the counter will count
+ * up to 127ms, int16_t up to 32767ms and int32_t up to 2147483647ms.
+ */
+typedef int32_t time_counter_t;
+
+/*! Max timeout value according to size of the time counter */
+enum sw_timer_timeouts
+{
+    kSwTimerMaxTimeout = 2147483647
+};
+
+/*!
+ * Data type of the free running counter. This data type should be unsigned and will count up to
+ * 255ms if it is uint8_t, 65535ms for uint16_t and 4294967295ms for uint32_t.
+ */
+typedef uint32_t time_free_counter_t;
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief Initializes the software timer module. Prepares variables and HAL layer to provide timer 
+ *        services. Starts the free running counter which will be available to get its value any 
+ *        time while the service is running; it is useful whenever a module wants to keep track of 
+ *        time, but do not wants to reserve a channel.
+ * 
+ * @return status_t        Returns software timer status after initialization.
+ * @retval kSwTimerStatusSuccess  The initialization was successful and the software timer is ready 
+ *                                to provide services.
+ * @retval kSwTimerStatusFail     The initialization failed.
+ */
+uint32_t sw_timer_init_service(void);
+
+/*!
+ * @brief Deinitializes the software timer module. Shutdown HAL layer, so no timer service can be
+ *        provided after the execution of this function.
+ * 
+ * @return void
+ */
+void sw_timer_shutdown_service(void);
+
+/*!
+ * @brief Reserves a free timer channel to be used by any module and returns its identifier.
+ * 
+ * @return uint8_t        Returns the number of the channel that was reserved.
+ * @retval Any value between 0 and SW_TIMER_NUMBER_CHANNELS is a valid channel. It indicates the 
+ *         channel was reserved and can be used.
+ * @retval kSwTimerChannelNotAvailable  If there is not any available channel, because all 
+ *                                         channels are already reserved.
+ */
+uint8_t sw_timer_reserve_channel(void);
+
+/*!
+ * @brief Returns the actual status of the given timer channel. The timer has to be previously
+ *        started to return a valid status.
+ *
+ * @param timerChannel    [in] Indicates the timer channel which status is going to be returned.
+ * 
+ * @return sw_timer_channel_status_t     Current status of the given timer channel.
+ * @retval kSwTimerChannelExpired        Indicates the timer channel has counted the given ms.
+ * @retval kSwTimerChannelStillCounting  Indicates the timeout of the channel has not expired and 
+                                         the timer is still counting.
+ * @retval kSwTimerChannelIsDisable      Indicates the timer channel is not reserved.
+ * @retval kSwTimerChannelNotAvailable   Indicates the timer channel is invalid.
+ */
+sw_timer_channel_status_t sw_timer_get_channel_status(uint8_t timerChannel);
+
+/*!
+ * @brief Starts the count down of the given timer channel. The timer channel has to be previously
+ *        reserved.
+ *
+ * @param timerChannel    [in] Indicates the timer channel that is going to be started.
+ * @param timeout         [in] Time in ms that the timer channel will count. The timeout should be 
+                               a multiple of count unit of the timer, otherwise it will be taken 
+                               the integer part of the division and the exact count will not be
+                               achieved
+ * 
+ * @return status_t                        Reports failures in the execution of the function.
+ * @retval kSwTimerStatusSuccess           A channel was started successfully.
+ * @retval kSwTimerStatusInvalidChannel    The timer channel is invalid, it does not exist.
+ */
+uint32_t sw_timer_start_channel(uint8_t timerChannel, time_counter_t timeout);
+
+/*!
+ * @brief Releases the given timer channel, so it can be used by someone else.
+ *
+ * @param timerChannel    [in] Identifier of the timer channel.
+ * 
+ * @return status_t                        Reports failures in the execution of the function.
+ * @retval kSwTimerStatusSuccess           A channel was released successfully.
+ * @retval kSwTimerStatusInvalidChannel    The timer channel is invalid, it does not exist.
+ */
+uint32_t sw_timer_release_channel(uint8_t timerChannel);
+
+/*!
+ * @brief Gets the current value of the free running counter. Any module can keep track of the time
+ *        by reading this counter and calculates time difference. No reservation of timer channel
+ *        is needed. Consider for calculations that when the counter overflows it will start from
+ *        0 again.
+ * 
+ * @return time_free_counter_t  Returns current count of the free running counter.
+ */
+time_free_counter_t sw_timer_get_free_counter(void);
+
+/*!
+ * @brief This function is called every 1ms by the interruption and update count down values of all
+ *        timer channels.
+ * 
+ * @return void
+ */
+void sw_timer_update_counters(void);
+
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+/*! @}*/
+/*Group sw_timer*/
+
+#endif  /* __SW_TIMER_H__ */
+/*******************************************************************************
+ * EOF
+ ******************************************************************************/
+

Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed

Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/startup_MK64F12.o has changed

Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/system_MK64F12.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/startup_MKL05Z4.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/system_MKL05Z4.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/startup_MKL05Z4.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/system_MKL05Z4.o has changed

Binary file TARGET_KL05Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed

Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed

Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/startup_MKL25Z4.o has changed

Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/system_MKL25Z4.o has changed

Binary file TARGET_KL25Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed

Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed

Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/startup_MKL46Z4.o has changed

Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/system_MKL46Z4.o has changed

Binary file TARGET_KL46Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed

Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed

Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/system_LPC11xx.o has changed

Binary file TARGET_LPC1114/TOOLCHAIN_GCC_ARM/libmbed.a has changed

--- a/TARGET_LPC11U24/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_401/PinNames.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_LPC11U24/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_401/PinNames.h	Mon Apr 28 17:39:05 2014 +0100
@@ -151,6 +151,9 @@
     D12 = P0_8,
     D13 = P1_29, // P0_9 for Arch V1.0
 
+    D14 = P0_5,
+    D15 = P0_4,
+
     A0 = P0_11,
     A1 = P0_12,
     A2 = P0_13,
@@ -158,6 +161,9 @@
     A4 = P0_16,
     A5 = P0_22,
 
+    I2C_SCL = D15,
+    I2C_SDA = D14,
+
     // Not connected
     NC = (int)0xFFFFFFFF,
 } PinName;

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/startup_LPC11xx.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed

Binary file TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/libmbed.a has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/startup_LPC11xx.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_ARM/libmbed.a has changed

Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_CR/libmbed.a has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/startup_LPC11xx.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_ARM/libmbed.a has changed

Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_CR/libmbed.a has changed

Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/startup_LPC13xx.o has changed

Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/system_LPC13Uxx.o has changed

Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/startup_LPC15xx.o has changed

Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/system_LPC15xx.o has changed

--- a/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/TARGET_MBED_LPC1768/PinNames.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/TARGET_MBED_LPC1768/PinNames.h	Mon Apr 28 17:39:05 2014 +0100
@@ -106,6 +106,9 @@
     A4 = P1_30,
     A5 = P1_31,
 
+    I2C_SCL = D15,
+    I2C_SDA = D14,
+
     // Not connected
     NC = (int)0xFFFFFFFF
 } PinName;

Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/startup_LPC17xx.o has changed

Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/system_LPC17xx.o has changed

Binary file TARGET_LPC1768/TOOLCHAIN_GCC_ARM/libmbed.a has changed

Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/libmbed.a has changed

Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CS/libmbed.a has changed

Binary file TARGET_LPC1768/TOOLCHAIN_IAR/board.o has changed

Binary file TARGET_LPC1768/TOOLCHAIN_IAR/cmsis_nvic.o has changed

Binary file TARGET_LPC1768/TOOLCHAIN_IAR/mbed.a has changed

Binary file TARGET_LPC1768/TOOLCHAIN_IAR/retarget.o has changed

Binary file TARGET_LPC1768/TOOLCHAIN_IAR/startup_LPC17xx.o has changed

Binary file TARGET_LPC1768/TOOLCHAIN_IAR/system_LPC17xx.o has changed

Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/core_arm7.o has changed

Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/system_LPC23xx.o has changed

Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/vector_functions.o has changed

Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/vector_realmonitor.o has changed

Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/vector_table.o has changed

Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/startup_LPC407x_8x_177x_8x.o has changed

Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/sys_helper.o has changed

Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/system_LPC407x_8x_177x_8x.o has changed

Binary file TARGET_LPC4088/TOOLCHAIN_GCC_ARM/libmbed.a has changed

Binary file TARGET_LPC4088/TOOLCHAIN_GCC_CR/libmbed.a has changed

Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/startup_LPC8xx.o has changed

Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/system_LPC8xx.o has changed

Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed

Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed

--- a/TARGET_NUCLEO_F030R8/TARGET_STM/TARGET_NUCLEO_F030R8/PeripheralNames.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F030R8/TARGET_STM/TARGET_NUCLEO_F030R8/PeripheralNames.h	Mon Apr 28 17:39:05 2014 +0100
@@ -67,7 +67,9 @@
 typedef enum {
     TIM_3 = (int)TIM3_BASE,
     TIM_14 = (int)TIM14_BASE,
-    TIM_16 = (int)TIM16_BASE
+    TIM_15 = (int)TIM15_BASE,
+    TIM_16 = (int)TIM16_BASE,
+    TIM_17 = (int)TIM17_BASE
 } PWMName;
 
 #ifdef __cplusplus

--- a/TARGET_NUCLEO_F030R8/TARGET_STM/TARGET_NUCLEO_F030R8/PinNames.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F030R8/TARGET_STM/TARGET_NUCLEO_F030R8/PinNames.h	Mon Apr 28 17:39:05 2014 +0100
@@ -158,7 +158,7 @@
     SPI_MISO    = PA_6,
     SPI_SCK     = PA_5,
     SPI_CS      = PB_6,
-    PWM_OUT     = PB_3,
+    PWM_OUT     = PC_7,
 
     // Not connected
     NC = (int)0xFFFFFFFF

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/startup_stm32f030.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_adc.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_can.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_cec.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_comp.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_crc.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_crs.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_dac.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_dbgmcu.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_dma.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_exti.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_flash.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_gpio.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_i2c.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_iwdg.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_misc.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_pwr.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_rcc.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_rtc.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_spi.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_syscfg.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_tim.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_usart.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_wwdg.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/system_stm32f0xx.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/startup_stm32f030.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_adc.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_can.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_cec.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_comp.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_crc.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_crs.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_dac.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_dbgmcu.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_dma.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_exti.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_flash.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_gpio.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_i2c.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_iwdg.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_misc.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_pwr.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_rcc.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_rtc.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_spi.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_syscfg.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_tim.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_usart.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_wwdg.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/system_stm32f0xx.o has changed

--- a/TARGET_NUCLEO_F030R8/stm32f0xx.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx.h	Mon Apr 28 17:39:05 2014 +0100
@@ -137,7 +137,7 @@
    Timeout value 
    */
 #if !defined  (HSE_STARTUP_TIMEOUT)
-#define HSE_STARTUP_TIMEOUT   ((uint16_t)0x5000) /*!< Time out for HSE start up */
+#define HSE_STARTUP_TIMEOUT   ((uint16_t)1000) /*!< Time out for HSE start up */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**

--- a/TARGET_NUCLEO_F030R8/system_stm32f0xx.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F030R8/system_stm32f0xx.h	Mon Apr 28 17:39:05 2014 +0100
@@ -94,6 +94,8 @@
   
 extern void SystemInit(void);
 extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
 /**
   * @}
   */

--- a/TARGET_NUCLEO_F103RB/TARGET_STM/TARGET_NUCLEO_F103RB/PeripheralNames.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F103RB/TARGET_STM/TARGET_NUCLEO_F103RB/PeripheralNames.h	Mon Apr 28 17:39:05 2014 +0100
@@ -37,13 +37,13 @@
 #endif
 
 typedef enum {
-    ADC_1 = (int)ADC1_BASE,
-    ADC_2 = (int)ADC2_BASE
+    ADC_1 = (int)ADC1_BASE
 } ADCName;
 
 typedef enum {
     UART_1 = (int)USART1_BASE,  
-    UART_2 = (int)USART2_BASE
+    UART_2 = (int)USART2_BASE,
+    UART_3 = (int)USART3_BASE
 } UARTName;
 
 #define STDIO_UART_TX  PA_2
@@ -61,6 +61,7 @@
 } I2CName;
 
 typedef enum {
+    PWM_1 = (int)TIM1_BASE,
     PWM_2 = (int)TIM2_BASE,
     PWM_3 = (int)TIM3_BASE,
     PWM_4 = (int)TIM4_BASE

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/misc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/startup_stm32f10x_md.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_adc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_bkp.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_can.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_cec.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_crc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_dac.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_dbgmcu.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_dma.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_exti.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_flash.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_fsmc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_gpio.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_i2c.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_iwdg.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_pwr.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_rcc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_rtc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_sdio.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_spi.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_tim.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_usart.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_wwdg.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/system_stm32f10x.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/misc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/startup_stm32f10x_md.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_adc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_bkp.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_can.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_cec.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_crc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_dac.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_dbgmcu.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_dma.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_exti.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_flash.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_fsmc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_gpio.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_i2c.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_iwdg.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_pwr.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_rcc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_rtc.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_sdio.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_spi.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_tim.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_usart.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_wwdg.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/system_stm32f10x.o has changed

--- a/TARGET_NUCLEO_F103RB/system_stm32f10x.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F103RB/system_stm32f10x.h	Mon Apr 28 17:39:05 2014 +0100
@@ -93,6 +93,8 @@
   
 extern void SystemInit(void);
 extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
 /**
   * @}
   */

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/startup_stm32f302x8.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_adc.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_can.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_comp.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_crc.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_dac.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_dbgmcu.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_dma.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_exti.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_flash.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_gpio.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_hrtim.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_i2c.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_iwdg.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_misc.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_opamp.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_pwr.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_rcc.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_rtc.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_spi.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_syscfg.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_tim.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_usart.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_wwdg.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/system_stm32f30x.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/startup_stm32f302x8.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_adc.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_can.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_comp.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_crc.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_dac.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_dbgmcu.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_dma.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_exti.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_flash.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_gpio.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_hrtim.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_i2c.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_iwdg.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_misc.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_opamp.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_pwr.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_rcc.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_rtc.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_spi.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_syscfg.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_tim.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_usart.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_wwdg.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/system_stm32f30x.o has changed

--- a/TARGET_NUCLEO_F302R8/system_stm32f30x.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F302R8/system_stm32f30x.h	Mon Apr 28 17:39:05 2014 +0100
@@ -65,6 +65,7 @@
   
 extern void SystemInit(void);
 extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
 
 /**
   * @}

--- a/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/PeripheralNames.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/PeripheralNames.h	Mon Apr 28 17:39:05 2014 +0100
@@ -41,7 +41,7 @@
 } ADCName;
 
 typedef enum {
-    UART_1 = (int)USART1_BASE,  
+    UART_1 = (int)USART1_BASE,
     UART_2 = (int)USART2_BASE,
     UART_6 = (int)USART6_BASE
 } UARTName;

--- a/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_object.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_object.h	Mon Apr 28 17:39:05 2014 +0100
@@ -50,8 +50,7 @@
 static inline void gpio_write(gpio_t *obj, int value) {
     if (value) {
         *obj->reg_set = obj->mask;
-    }
-    else {
+    } else {
         *obj->reg_clr = obj->mask;
     }
 }

--- a/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/objects.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/objects.h	Mon Apr 28 17:39:05 2014 +0100
@@ -49,7 +49,7 @@
 struct port_s {
     PortName port;
     uint32_t mask;
-    PinDirection direction;  
+    PinDirection direction;
     __IO uint32_t *reg_in;
     __IO uint32_t *reg_out;
 };
@@ -65,7 +65,7 @@
     uint32_t baudrate;
     uint32_t databits;
     uint32_t stopbits;
-    uint32_t parity; 
+    uint32_t parity;
 };
 
 struct spi_s {

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/startup_stm32f401xe.o has changed

--- a/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f401xe.sct	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f401xe.sct	Mon Apr 28 17:39:05 2014 +0100
@@ -27,7 +27,8 @@
 ; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
-LR_IROM1 0x08000000 0x80000  {    ; load region size_region (512K)
+; STM32F401RE: 512KB FLASH + 96KB SRAM
+LR_IROM1 0x08000000 0x80000  {    ; load region size_region
 
   ER_IROM1 0x08000000 0x80000  {  ; load address = execution address
    *.o (RESET, +First)

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.o has changed

--- a/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f401xe.sct	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f401xe.sct	Mon Apr 28 17:39:05 2014 +0100
@@ -27,7 +27,8 @@
 ; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
-LR_IROM1 0x08000000 0x80000  {    ; load region size_region (512K)
+; STM32F401RE: 512KB FLASH + 96KB SRAM
+LR_IROM1 0x08000000 0x80000  {    ; load region size_region
 
   ER_IROM1 0x08000000 0x80000  {  ; load address = execution address
    *.o (RESET, +First)

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed

--- a/TARGET_NUCLEO_F401RE/stm32f4xx.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F401RE/stm32f4xx.h	Mon Apr 28 17:39:05 2014 +0100
@@ -196,6 +196,10 @@
   * @}
   */
 
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
 
 #ifdef __cplusplus
 }

--- a/TARGET_NUCLEO_F401RE/stm32f4xx_hal_conf.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F401RE/stm32f4xx_hal_conf.h	Mon Apr 28 17:39:05 2014 +0100
@@ -103,7 +103,7 @@
 #endif /* HSE_VALUE */
 
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)50)   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
@@ -116,6 +116,14 @@
 #endif /* HSI_VALUE */
 
 /**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+/**
   * @brief External clock source for I2S peripheral
   *        This value is used by the I2S HAL module to compute the I2S clock source 
   *        frequency, this source is inserted directly through I2S_CKIN pad. 
@@ -131,7 +139,8 @@
 /**
   * @brief This is the HAL system configuration section
   */     
-#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */           
+#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)3)    /*!< tick interrupt priority */            
 #define  USE_RTOS                     0     
 #define  PREFETCH_ENABLE              1              
 #define  INSTRUCTION_CACHE_ENABLE     1

--- a/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc.h	Mon Apr 28 17:39:05 2014 +0100
@@ -190,7 +190,7 @@
 
 
 #define DBP_TIMEOUT_VALUE          ((uint32_t)100)
-#define LSE_TIMEOUT_VALUE          ((uint32_t)5000)
+#define LSE_TIMEOUT_VALUE          ((uint32_t)100)
 /**
   * @}
   */

--- a/TARGET_NUCLEO_F401RE/system_stm32f4xx.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/TARGET_NUCLEO_F401RE/system_stm32f4xx.h	Mon Apr 28 17:39:05 2014 +0100
@@ -32,8 +32,8 @@
   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
-  ******************************************************************************  
-  */ 
+  ******************************************************************************
+  */
 
 /** @addtogroup CMSIS
   * @{

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/board.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/misc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/startup_stm32l1xx_hd.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_adc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_aes.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_aes_util.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_comp.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_crc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_dac.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_dbgmcu.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_dma.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_exti.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_flash.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_flash_ramfunc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_fsmc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_gpio.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_i2c.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_iwdg.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_lcd.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_opamp.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_pwr.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_rcc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_rtc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_sdio.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_spi.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_syscfg.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_tim.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_usart.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_wwdg.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/sys.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/system_stm32l1xx.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/misc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/startup_stm32l1xx_hd.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_adc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_aes.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_aes_util.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_comp.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_crc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_dac.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_dbgmcu.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_dma.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_exti.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_flash.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_flash_ramfunc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_fsmc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_gpio.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_i2c.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_iwdg.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_lcd.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_opamp.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_pwr.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_rcc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_rtc.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_sdio.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_spi.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_syscfg.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_tim.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_usart.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_wwdg.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/system_stm32l1xx.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/board.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/mbed.ar has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/retarget.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/startup_LPC17xx.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/sys.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/system_LPC17xx.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_ARM/libmbed.a has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/libmbed.a has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CS/libmbed.a has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/board.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/cmsis_nvic.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/mbed.a has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/mbed_overrides.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/retarget.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/startup_LPC17xx.o has changed

Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/system_LPC17xx.o has changed

--- a/mbed.h	Mon Apr 07 18:28:36 2014 +0100
+++ b/mbed.h	Mon Apr 28 17:39:05 2014 +0100
@@ -16,7 +16,7 @@
 #ifndef MBED_H
 #define MBED_H
 
-#define MBED_LIBRARY_VERSION 81
+#define MBED_LIBRARY_VERSION 83
 
 #include "platform.h"