frederic blanc
/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h substitute line 894 extern } by }
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F334R8/stm32f3xx_hal_i2s.h
- Revision:
- 86:04dd9b1680ae
- Child:
- 92:4fc01daae5a5
diff -r 024bf7f99721 -r 04dd9b1680ae TARGET_NUCLEO_F334R8/stm32f3xx_hal_i2s.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_i2s.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,440 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2s.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2S_H
+#define __STM32F3xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F301x8) || \
+ defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303xC) || defined(STM32F373xC) || \
+ defined(STM32F318xx) || \
+ defined(STM32F358xx) || defined(STM32F378xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+
+ uint32_t ClockSource; /*!< Specifies the I2S Clock Source.
+ This parameter can be a value of @ref I2S_Clock_Source */
+
+ uint32_t FullDuplexMode; /*!< Specifies the I2S FullDuplex mode.
+ This parameter can be a value of @ref I2S_FullDuplex_Mode */
+
+}I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
+ HAL_I2S_STATE_TIMEOUT = 0x06, /*!< I2S timeout state */
+ HAL_I2S_STATE_ERROR = 0x07 /*!< I2S error state */
+
+}HAL_I2S_StateTypeDef;
+
+/**
+ * @brief HAL I2S Error Code structure definition
+ */
+typedef enum
+{
+ HAL_I2S_ERROR_NONE = 0x00, /*!< No error */
+ HAL_I2S_ERROR_TIMEOUT = 0x01, /*!< Timeout error */
+ HAL_I2S_ERROR_OVR = 0x02, /*!< OVR error */
+ HAL_I2S_ERROR_UDR = 0x04, /*!< UDR error */
+ HAL_I2S_ERROR_DMA = 0x08, /*!< DMA transfer error */
+ HAL_I2S_ERROR_UNKNOW = 0x10 /*!< Unknow Error error */
+}HAL_I2S_ErrorTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+typedef struct
+{
+ SPI_TypeDef *Instance; /* I2S registers base address */
+
+ I2S_InitTypeDef Init; /* I2S communication parameters */
+
+ uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /* I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* I2S Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
+
+ __IO HAL_I2S_ErrorTypeDef ErrorCode; /* I2S Error code */
+
+}I2S_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2S_Exported_Constants
+ * @{
+ */
+
+/** @defgroup I2S_Clock_Source
+ * @{
+ */
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001)
+#define I2S_CLOCK_SYSCLK ((uint32_t)0x00000002)
+
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) || \
+ ((CLOCK) == I2S_CLOCK_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000)
+#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100)
+#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200)
+#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300)
+
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
+ ((MODE) == I2S_MODE_SLAVE_RX) || \
+ ((MODE) == I2S_MODE_MASTER_TX)|| \
+ ((MODE) == I2S_MODE_MASTER_RX))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000)
+#define I2S_STANDARD_MSB ((uint32_t)0x00000010)
+#define I2S_STANDARD_LSB ((uint32_t)0x00000020)
+#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030)
+#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0)
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
+ ((STANDARD) == I2S_STANDARD_MSB) || \
+ ((STANDARD) == I2S_STANDARD_LSB) || \
+ ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+ ((STANDARD) == I2S_STANDARD_PCM_LONG))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format
+ * @{
+ */
+#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000)
+#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001)
+#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003)
+#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005)
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
+ ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((FORMAT) == I2S_DATAFORMAT_24B) || \
+ ((FORMAT) == I2S_DATAFORMAT_32B))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000)
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K ((uint32_t)192000)
+#define I2S_AUDIOFREQ_96K ((uint32_t)96000)
+#define I2S_AUDIOFREQ_48K ((uint32_t)48000)
+#define I2S_AUDIOFREQ_44K ((uint32_t)44100)
+#define I2S_AUDIOFREQ_32K ((uint32_t)32000)
+#define I2S_AUDIOFREQ_22K ((uint32_t)22050)
+#define I2S_AUDIOFREQ_16K ((uint32_t)16000)
+#define I2S_AUDIOFREQ_11K ((uint32_t)11025)
+#define I2S_AUDIOFREQ_8K ((uint32_t)8000)
+#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+ ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+ ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_FullDuplex_Mode
+ * @{
+ */
+#define I2S_FULLDUPLEXMODE_DISABLE ((uint32_t)0x00000000)
+#define I2S_FULLDUPLEXMODE_ENABLE ((uint32_t)0x00000001)
+
+#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \
+ ((MODE) == I2S_FULLDUPLEXMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity
+ * @{
+ */
+#define I2S_CPOL_LOW ((uint32_t)0x00000000)
+#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+ ((CPOL) == I2S_CPOL_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupt_configuration_definition
+ * @{
+ */
+#define I2S_IT_TXE SPI_CR2_TXEIE
+#define I2S_IT_RXNE SPI_CR2_RXNEIE
+#define I2S_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flag_definition
+ * @{
+ */
+#define I2S_FLAG_TXE SPI_SR_TXE
+#define I2S_FLAG_RXNE SPI_SR_RXNE
+
+#define I2S_FLAG_UDR SPI_SR_UDR
+#define I2S_FLAG_OVR SPI_SR_OVR
+#define I2S_FLAG_FRE SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
+#define I2S_FLAG_BSY SPI_SR_BSY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__: I2S handle.
+ * @retval None
+ */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief Enable or disable the specified I2S interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2S flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
+ (__HANDLE__)->Instance->SR;}while(0)
+/** @brief Clears the I2S UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR)
+
+/* Include I2S HAL Extension module */
+#include "stm32f3xx_hal_i2s_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+
+/* I/O operation functions ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+/* Peripheral Control and State functions ************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+HAL_I2S_ErrorTypeDef HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F301x8) || */
+ /* defined(STM32F302x8) || defined(STM32F302xC) || */
+ /* defined(STM32F303xC) || defined(STM32F373xC) || */
+ /* defined(STM32F318xx) || */
+ /* defined(STM32F358xx) || defined(STM32F378xx) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/