fahim alavi / ublox-cellular-base

edrx

UbloxCellularBase.h@23:eaab8e812a5d, 2019-05-03 (annotated)

Committer:
wajahat.abbas@u-blox.com
Date:
Fri May 03 13:43:49 2019 +0500
Revision:
23:eaab8e812a5d
Parent:
22:779971811c46
Child:
24:e26a6ab0dd75
Added PSM support for R412M

Who changed what in which revision?

UserRevisionLine numberNew contents of line
RobMeades 0:5cffef3371f6 1 /* Copyright (c) 2017 ARM Limited
RobMeades 0:5cffef3371f6 2 *
RobMeades 0:5cffef3371f6 3 * Licensed under the Apache License, Version 2.0 (the "License");
RobMeades 0:5cffef3371f6 4 * you may not use this file except in compliance with the License.
RobMeades 0:5cffef3371f6 5 * You may obtain a copy of the License at
RobMeades 0:5cffef3371f6 6 *
RobMeades 0:5cffef3371f6 7 * http://www.apache.org/licenses/LICENSE-2.0
RobMeades 0:5cffef3371f6 8 *
RobMeades 0:5cffef3371f6 9 * Unless required by applicable law or agreed to in writing, software
RobMeades 0:5cffef3371f6 10 * distributed under the License is distributed on an "AS IS" BASIS,
RobMeades 0:5cffef3371f6 11 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
RobMeades 0:5cffef3371f6 12 * See the License for the specific language governing permissions and
RobMeades 0:5cffef3371f6 13 * limitations under the License.
RobMeades 0:5cffef3371f6 14 */
RobMeades 0:5cffef3371f6 15
rob.meades@u-blox.com 1:5aaecf2572dc 16 #ifndef _UBLOX_CELLULAR_BASE_
rob.meades@u-blox.com 1:5aaecf2572dc 17 #define _UBLOX_CELLULAR_BASE_
RobMeades 0:5cffef3371f6 18
RobMeades 0:5cffef3371f6 19 #include "mbed.h"
RobMeades 14:e420232ee4e7 20 #include "mbed_toolchain.h" // for MBED_DEPRECATED
RobMeades 0:5cffef3371f6 21 #include "ATCmdParser.h"
RobMeades 0:5cffef3371f6 22 #include "FileHandle.h"
RobMeades 0:5cffef3371f6 23
RobMeades 0:5cffef3371f6 24 /**********************************************************************
RobMeades 0:5cffef3371f6 25 * CLASSES
RobMeades 0:5cffef3371f6 26 **********************************************************************/
RobMeades 0:5cffef3371f6 27
RobMeades 0:5cffef3371f6 28 /** UbloxCellularBase class.
RobMeades 0:5cffef3371f6 29 *
RobMeades 0:5cffef3371f6 30 * This class provides all the base support for generic u-blox modems
RobMeades 0:5cffef3371f6 31 * on C030 and C027 boards: module identification, power-up, network
RobMeades 0:5cffef3371f6 32 * registration, etc.
RobMeades 0:5cffef3371f6 33 */
RobMeades 0:5cffef3371f6 34 class UbloxCellularBase {
RobMeades 0:5cffef3371f6 35
RobMeades 0:5cffef3371f6 36 public:
RobMeades 0:5cffef3371f6 37 /** Circuit Switched network registration status (CREG Usage).
RobMeades 0:5cffef3371f6 38 * UBX-13001820 - AT Commands Example Application Note (Section 7.10.3).
RobMeades 0:5cffef3371f6 39 */
RobMeades 0:5cffef3371f6 40 typedef enum {
RobMeades 0:5cffef3371f6 41 CSD_NOT_REGISTERED_NOT_SEARCHING = 0,
RobMeades 0:5cffef3371f6 42 CSD_REGISTERED = 1,
RobMeades 0:5cffef3371f6 43 CSD_NOT_REGISTERED_SEARCHING = 2,
RobMeades 0:5cffef3371f6 44 CSD_REGISTRATION_DENIED = 3,
RobMeades 0:5cffef3371f6 45 CSD_UNKNOWN_COVERAGE = 4,
RobMeades 0:5cffef3371f6 46 CSD_REGISTERED_ROAMING = 5,
RobMeades 0:5cffef3371f6 47 CSD_SMS_ONLY = 6,
RobMeades 0:5cffef3371f6 48 CSD_SMS_ONLY_ROAMING = 7,
RobMeades 0:5cffef3371f6 49 CSD_CSFB_NOT_PREFERRED = 9
RobMeades 0:5cffef3371f6 50 } NetworkRegistrationStatusCsd;
RobMeades 0:5cffef3371f6 51
RobMeades 0:5cffef3371f6 52 /** Packet Switched network registration status (CGREG Usage).
RobMeades 0:5cffef3371f6 53 * UBX-13001820 - AT Commands Example Application Note (Section 18.27.3).
RobMeades 0:5cffef3371f6 54 */
RobMeades 0:5cffef3371f6 55 typedef enum {
RobMeades 0:5cffef3371f6 56 PSD_NOT_REGISTERED_NOT_SEARCHING = 0,
RobMeades 0:5cffef3371f6 57 PSD_REGISTERED = 1,
RobMeades 0:5cffef3371f6 58 PSD_NOT_REGISTERED_SEARCHING = 2,
RobMeades 0:5cffef3371f6 59 PSD_REGISTRATION_DENIED = 3,
RobMeades 0:5cffef3371f6 60 PSD_UNKNOWN_COVERAGE = 4,
RobMeades 0:5cffef3371f6 61 PSD_REGISTERED_ROAMING = 5,
RobMeades 0:5cffef3371f6 62 PSD_EMERGENCY_SERVICES_ONLY = 8
RobMeades 0:5cffef3371f6 63 } NetworkRegistrationStatusPsd;
RobMeades 0:5cffef3371f6 64
RobMeades 0:5cffef3371f6 65 /** EPS network registration status (CEREG Usage).
RobMeades 0:5cffef3371f6 66 * UBX-13001820 - AT Commands Example Application Note (Section 18.36.3).
RobMeades 0:5cffef3371f6 67 */
RobMeades 0:5cffef3371f6 68 typedef enum {
RobMeades 0:5cffef3371f6 69 EPS_NOT_REGISTERED_NOT_SEARCHING = 0,
RobMeades 0:5cffef3371f6 70 EPS_REGISTERED = 1,
RobMeades 0:5cffef3371f6 71 EPS_NOT_REGISTERED_SEARCHING = 2,
RobMeades 0:5cffef3371f6 72 EPS_REGISTRATION_DENIED = 3,
RobMeades 0:5cffef3371f6 73 EPS_UNKNOWN_COVERAGE = 4,
RobMeades 0:5cffef3371f6 74 EPS_REGISTERED_ROAMING = 5,
RobMeades 0:5cffef3371f6 75 EPS_EMERGENCY_SERVICES_ONLY = 8
RobMeades 0:5cffef3371f6 76 } NetworkRegistrationStatusEps;
RobMeades 0:5cffef3371f6 77
wajahat.abbas@u-blox.com 23:eaab8e812a5d 78 /** modem PSM states.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 79 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 80 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 81 typedef enum {
wajahat.abbas@u-blox.com 23:eaab8e812a5d 82 AWAKE = 0,
wajahat.abbas@u-blox.com 23:eaab8e812a5d 83 ASLEEP = 1
wajahat.abbas@u-blox.com 23:eaab8e812a5d 84 } ModemPSMState;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 85
RobMeades 0:5cffef3371f6 86 /** Initialise the modem, ready for use.
RobMeades 0:5cffef3371f6 87 *
RobMeades 0:5cffef3371f6 88 * @param pin PIN for the SIM card.
RobMeades 0:5cffef3371f6 89 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 90 */
RobMeades 0:5cffef3371f6 91 bool init(const char *pin = 0);
RobMeades 0:5cffef3371f6 92
RobMeades 0:5cffef3371f6 93 /** Perform registration with the network.
RobMeades 0:5cffef3371f6 94 *
RobMeades 0:5cffef3371f6 95 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 96 */
RobMeades 0:5cffef3371f6 97 bool nwk_registration();
RobMeades 0:5cffef3371f6 98
RobMeades 0:5cffef3371f6 99 /** True if the modem is registered for circuit
RobMeades 0:5cffef3371f6 100 * switched data, otherwise false.
RobMeades 0:5cffef3371f6 101 */
RobMeades 0:5cffef3371f6 102 bool is_registered_csd();
RobMeades 0:5cffef3371f6 103
RobMeades 0:5cffef3371f6 104 /** True if the modem is registered for packet
RobMeades 0:5cffef3371f6 105 * switched data, otherwise false.
RobMeades 0:5cffef3371f6 106 */
RobMeades 0:5cffef3371f6 107 bool is_registered_psd();
RobMeades 0:5cffef3371f6 108
RobMeades 0:5cffef3371f6 109 /** True if the modem is registered for enhanced
RobMeades 0:5cffef3371f6 110 * packet switched data (i.e. LTE and beyond),
RobMeades 0:5cffef3371f6 111 * otherwise false.
RobMeades 0:5cffef3371f6 112 */
RobMeades 0:5cffef3371f6 113 bool is_registered_eps();
RobMeades 0:5cffef3371f6 114
RobMeades 0:5cffef3371f6 115 /** Perform deregistration from the network.
RobMeades 0:5cffef3371f6 116 *
RobMeades 0:5cffef3371f6 117 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 118 */
RobMeades 0:5cffef3371f6 119 bool nwk_deregistration();
RobMeades 0:5cffef3371f6 120
RobMeades 0:5cffef3371f6 121 /** Put the modem into its lowest power state.
RobMeades 0:5cffef3371f6 122 */
RobMeades 0:5cffef3371f6 123 void deinit();
RobMeades 0:5cffef3371f6 124
RobMeades 0:5cffef3371f6 125 /** Set the PIN code for the SIM card.
RobMeades 0:5cffef3371f6 126 *
RobMeades 0:5cffef3371f6 127 * @param pin PIN for the SIM card.
RobMeades 0:5cffef3371f6 128 */
RobMeades 0:5cffef3371f6 129 void set_pin(const char *pin);
RobMeades 0:5cffef3371f6 130
RobMeades 0:5cffef3371f6 131 /** Enable or disable SIM pin checking.
RobMeades 0:5cffef3371f6 132 *
RobMeades 0:5cffef3371f6 133 * @param enableNotDisable true if SIM PIN checking is to be enabled,
RobMeades 0:5cffef3371f6 134 * otherwise false.
RobMeades 0:5cffef3371f6 135 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 136 */
RobMeades 0:5cffef3371f6 137 bool sim_pin_check_enable(bool enableNotDisable);
RobMeades 0:5cffef3371f6 138
RobMeades 0:5cffef3371f6 139 /** Change the SIM pin.
RobMeades 0:5cffef3371f6 140 *
RobMeades 0:5cffef3371f6 141 * @param new_pin the new PIN to use.
RobMeades 0:5cffef3371f6 142 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 143 */
RobMeades 0:5cffef3371f6 144 bool change_sim_pin(const char *new_pin);
RobMeades 0:5cffef3371f6 145
fahim alavi 11:57f64bc518c0 146 /** Get the IMEI.
fahim alavi 11:57f64bc518c0 147 *
fahim alavi 11:57f64bc518c0 148 * @return true if successful, otherwise false.
fahim alavi 11:57f64bc518c0 149 */
RobMeades 14:e420232ee4e7 150 MBED_DEPRECATED("This method is now replaced by const char * imei(), please use that instead")
fahim alavi 12:aa3cbc3f88c5 151 bool get_imei(char *imei_to_send, int size);
fahim alavi 11:57f64bc518c0 152
RobMeades 14:e420232ee4e7 153 /** Get the IMEI of the module.
RobMeades 14:e420232ee4e7 154 *
RobMeades 14:e420232ee4e7 155 * @return a pointer to the IMEI as a null-terminated string.
RobMeades 14:e420232ee4e7 156 */
RobMeades 14:e420232ee4e7 157 const char *imei();
RobMeades 14:e420232ee4e7 158
RobMeades 14:e420232ee4e7 159 /** Get the Mobile Equipment ID (which may be the same as the IMEI).
RobMeades 14:e420232ee4e7 160 *
RobMeades 14:e420232ee4e7 161 * @return a pointer to the Mobile Equipment ID as a null-terminated string.
RobMeades 14:e420232ee4e7 162 */
RobMeades 14:e420232ee4e7 163 const char *meid();
RobMeades 14:e420232ee4e7 164
RobMeades 14:e420232ee4e7 165 /** Get the IMSI of the SIM.
RobMeades 14:e420232ee4e7 166 *
RobMeades 14:e420232ee4e7 167 * @return a pointer to the IMSI as a null-terminated string.
RobMeades 14:e420232ee4e7 168 */
RobMeades 14:e420232ee4e7 169 const char *imsi();
RobMeades 14:e420232ee4e7 170
RobMeades 14:e420232ee4e7 171 /** Get the ICCID of the SIM.
RobMeades 14:e420232ee4e7 172 *
RobMeades 14:e420232ee4e7 173 * @return a pointer to the ICCID as a null-terminated string.
RobMeades 14:e420232ee4e7 174 */
RobMeades 14:e420232ee4e7 175 const char *iccid();
RobMeades 14:e420232ee4e7 176
RobMeades 14:e420232ee4e7 177 /** Get the RSSI.
RobMeades 14:e420232ee4e7 178 *
RobMeades 14:e420232ee4e7 179 * @return the RSSI in dBm. If it is not possible to obtain an
RobMeades 14:e420232ee4e7 180 * RSSI reading at the time (e.g. because the modem is in
RobMeades 14:e420232ee4e7 181 * data mode rather than AT command mode) then 0 is returned.
RobMeades 14:e420232ee4e7 182 */
RobMeades 14:e420232ee4e7 183 int rssi();
RobMeades 14:e420232ee4e7 184
wajahat.abbas@u-blox.com 20:31d5e048fbfa 185 /** RAT values for +URAT command
wajahat.abbas@u-blox.com 20:31d5e048fbfa 186 * R412M only supports value 7 (CatM1), 8 (NB1), and 9 (GPRS)
wajahat.abbas@u-blox.com 20:31d5e048fbfa 187 */
wajahat.abbas@u-blox.com 20:31d5e048fbfa 188 typedef enum {
wajahat.abbas@u-blox.com 20:31d5e048fbfa 189 GSM_GPRS_EGPRS = 0,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 190 GSM_UMTS = 1,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 191 UMTS = 2,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 192 URAT_LTE = 3,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 193 GSM_UMTS_LTE = 4,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 194 GSM_LTE = 5,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 195 UMTS_LTE = 6,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 196 LTE_CATM1 = 7,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 197 LTE_CATNB1 = 8,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 198 GPRS_EGPRS = 9,
wajahat.abbas@u-blox.com 22:779971811c46 199 NOT_USED = -1
wajahat.abbas@u-blox.com 20:31d5e048fbfa 200 } RAT;
wajahat.abbas@u-blox.com 20:31d5e048fbfa 201
wajahat.abbas@u-blox.com 20:31d5e048fbfa 202 #ifdef TARGET_UBLOX_C030_R41XM
wajahat.abbas@u-blox.com 20:31d5e048fbfa 203 /** Supported MNO profiles for SARA-R4.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 204 */
wajahat.abbas@u-blox.com 20:31d5e048fbfa 205 typedef enum {
wajahat.abbas@u-blox.com 20:31d5e048fbfa 206 SW_DEFAULT = 0,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 207 SIM_ICCID = 1,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 208 ATT = 2,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 209 VERIZON = 3,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 210 TELSTRA = 4,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 211 TMO = 5,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 212 CT = 6,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 213 VODAFONE = 19,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 214 TELUS = 21,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 215 DT = 31,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 216 STANDARD_EU = 100
wajahat.abbas@u-blox.com 20:31d5e048fbfa 217 } MNOProfile;
wajahat.abbas@u-blox.com 20:31d5e048fbfa 218
wajahat.abbas@u-blox.com 20:31d5e048fbfa 219 #if MBED_CONF_UBLOX_CELL_DEFAULT_MNO_PROFILE
wajahat.abbas@u-blox.com 20:31d5e048fbfa 220 #define DEFAULT_MNO_PROFILE (MNOProfile)MBED_CONF_UBLOX_CELL_DEFAULT_MNO_PROFILE
wajahat.abbas@u-blox.com 20:31d5e048fbfa 221 #else
wajahat.abbas@u-blox.com 20:31d5e048fbfa 222 #define DEFAULT_MNO_PROFILE SW_DEFAULT
wajahat.abbas@u-blox.com 20:31d5e048fbfa 223 #endif
wajahat.abbas@u-blox.com 20:31d5e048fbfa 224
wajahat.abbas@u-blox.com 21:98aea8f49cd8 225 /** Reads the current MNO profile from modem and sets it to user specified profile.
wajahat.abbas@u-blox.com 21:98aea8f49cd8 226 * User can also specify profile in mbed_lib.json file and call set_mno_profile without any arguments.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 227 *
wajahat.abbas@u-blox.com 21:98aea8f49cd8 228 * Note: MNO profile should only be set in detached state and a reboot is required for settings to take effect
wajahat.abbas@u-blox.com 21:98aea8f49cd8 229 *
wajahat.abbas@u-blox.com 21:98aea8f49cd8 230 * @param profile MNO profile to use
wajahat.abbas@u-blox.com 20:31d5e048fbfa 231 * @return true if operation was successful, false if there was an error
wajahat.abbas@u-blox.com 20:31d5e048fbfa 232 */
wajahat.abbas@u-blox.com 20:31d5e048fbfa 233 bool set_mno_profile(MNOProfile profile = DEFAULT_MNO_PROFILE);
wajahat.abbas@u-blox.com 20:31d5e048fbfa 234
wajahat.abbas@u-blox.com 20:31d5e048fbfa 235 /** Get current MNO profile.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 236 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 237 * @param profile pointer to variable that can hold the value for returned profile
wajahat.abbas@u-blox.com 20:31d5e048fbfa 238 * @return true if operation was successful, false if there was an error
wajahat.abbas@u-blox.com 20:31d5e048fbfa 239 */
wajahat.abbas@u-blox.com 22:779971811c46 240 bool get_mno_profile(int *profile);
wajahat.abbas@u-blox.com 20:31d5e048fbfa 241 #endif
wajahat.abbas@u-blox.com 20:31d5e048fbfa 242
wajahat.abbas@u-blox.com 20:31d5e048fbfa 243 /** Set Radio Access Technology on modem.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 244 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 245 * Note: RAT should only be set in detached state and a reboot is required for settings to take effect
wajahat.abbas@u-blox.com 20:31d5e048fbfa 246 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 247 * @param selected_rat Radio Access Technology to use
wajahat.abbas@u-blox.com 20:31d5e048fbfa 248 * @param preferred_rat Radio Access Technology to use if selected_rat is not available
wajahat.abbas@u-blox.com 20:31d5e048fbfa 249 * @param second_preferred_rat Radio Access Technology to use if selected_rat and preferred_rat are not available
wajahat.abbas@u-blox.com 20:31d5e048fbfa 250 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 251 * @return true if successful, otherwise false.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 252 */
wajahat.abbas@u-blox.com 20:31d5e048fbfa 253 bool set_modem_rat(RAT selected_rat, RAT preferred_rat = NOT_USED, RAT second_preferred_rat = NOT_USED);
wajahat.abbas@u-blox.com 20:31d5e048fbfa 254
wajahat.abbas@u-blox.com 20:31d5e048fbfa 255 /** Get last saved values for RAT using +URAT read command. Note: The current selected RAT is indicated by DeviceInfo.rat
wajahat.abbas@u-blox.com 20:31d5e048fbfa 256 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 257 * @param selected_rat pointer to variable that can hold the value for selected_rat
wajahat.abbas@u-blox.com 20:31d5e048fbfa 258 * @param preferred_rat pointer to variable that can hold the value for preferred_rat
wajahat.abbas@u-blox.com 20:31d5e048fbfa 259 * @param second_preferred_rat pointer to variable that can hold the value for second_preferred_rat
wajahat.abbas@u-blox.com 20:31d5e048fbfa 260 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 261 * Note: NOT_USED will be returned in the variables if dual or tri modes are not enabled.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 262 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 263 * @return true if successful, otherwise false.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 264 */
wajahat.abbas@u-blox.com 22:779971811c46 265 bool get_modem_rat(int *selected_rat, int *preferred_rat, int *second_preferred_rat);
wajahat.abbas@u-blox.com 20:31d5e048fbfa 266
wajahat.abbas@u-blox.com 23:eaab8e812a5d 267 /** reboot the modem using AT+CFUN=15. Application should call init() or connect() before making any other API calls.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 268 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 269 * @return true if successful, otherwise false.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 270 */
wajahat.abbas@u-blox.com 20:31d5e048fbfa 271 bool reboot_modem();
wajahat.abbas@u-blox.com 23:eaab8e812a5d 272
wajahat.abbas@u-blox.com 23:eaab8e812a5d 273 #ifdef TARGET_UBLOX_C030_R412M
wajahat.abbas@u-blox.com 23:eaab8e812a5d 274 /** Important: Callback function is executed in context of AT parser so a user should not issue any AT commands from inside the callback.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 275 * It is recommended to set a flag/event/signal in callback and application can use that to wake up the modem and re-initialize it
wajahat.abbas@u-blox.com 23:eaab8e812a5d 276 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 277 * application callback for modem going in to PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 278 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 279 * @param func callback function to be executed when modem is going in to PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 280 * @param param parameter to be passed to callback function.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 281 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 282 void attach_cb_psm_going_in(Callback<void(void*)> func, void *param)
wajahat.abbas@u-blox.com 23:eaab8e812a5d 283 {
wajahat.abbas@u-blox.com 23:eaab8e812a5d 284 _func_psm_going_in = func;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 285 _cb_param_psm_going_in = param;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 286 }
wajahat.abbas@u-blox.com 23:eaab8e812a5d 287
wajahat.abbas@u-blox.com 23:eaab8e812a5d 288 /** Important: Callback function is executed in context of AT parser so a user should not issue any AT commands from inside the callback.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 289 * It is recommended to set a flag/event/signal in callback and application can use that to wake up the modem and re-initialize it
wajahat.abbas@u-blox.com 23:eaab8e812a5d 290 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 291 * application callback for modem coming out of PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 292 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 293 * @param func callback function to be executed when modem is coming out of PSM sleep.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 294 * @param param parameter to be passed to callback function.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 295 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 296 void attach_cb_psm_coming_out(Callback<void(void*)> func, void *param)
wajahat.abbas@u-blox.com 23:eaab8e812a5d 297 {
wajahat.abbas@u-blox.com 23:eaab8e812a5d 298 _func_psm_coming_out = func;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 299 _cb_param_psm_coming_out = param;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 300 }
wajahat.abbas@u-blox.com 23:eaab8e812a5d 301
wajahat.abbas@u-blox.com 23:eaab8e812a5d 302 /** de-register the application callback for modem going in to PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 303 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 304 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 305 void detach_cb_psm_going_in()
wajahat.abbas@u-blox.com 23:eaab8e812a5d 306 {
wajahat.abbas@u-blox.com 23:eaab8e812a5d 307 _func_psm_going_in = NULL;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 308 _cb_param_psm_going_in = NULL;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 309 }
wajahat.abbas@u-blox.com 23:eaab8e812a5d 310
wajahat.abbas@u-blox.com 23:eaab8e812a5d 311 /** de-register application callback for modem coming out of PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 312 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 313 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 314 void detach_cb_psm_coming_out()
wajahat.abbas@u-blox.com 23:eaab8e812a5d 315 {
wajahat.abbas@u-blox.com 23:eaab8e812a5d 316 _func_psm_coming_out = NULL;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 317 _cb_param_psm_coming_out = NULL;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 318 }
wajahat.abbas@u-blox.com 23:eaab8e812a5d 319
wajahat.abbas@u-blox.com 23:eaab8e812a5d 320 /** Enable or disable the 3GPP PSM.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 321 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 322 * Note: Application should reboot the module after enabling PSM in order to enter PSM state. (reboot_modem())
wajahat.abbas@u-blox.com 23:eaab8e812a5d 323 * Note: Modem can be woken up by toggling the power-on signal. (wakeup_modem())
wajahat.abbas@u-blox.com 23:eaab8e812a5d 324 * Note: When device enters PSM, all connections(PPP, sockets) and settings that are not saved in NV memory(ATE0, CREG etc) are lost.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 325 * host application should be prepared to re-initialize the modem and re-establish the connections.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 326 * Note: PSM is disabled if both periodic_time and active_time are 0.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 327 * Note: Not all variants/firmware versions support PSM URCs and in that case function will return false.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 328 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 329 * PSM string encoding code is borrowed from AT_CellularPower.cpp
wajahat.abbas@u-blox.com 23:eaab8e812a5d 330 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 331 * @param periodic_time requested periodic TAU in seconds.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 332 * @param active_time requested active time in seconds.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 333 * @param func callback function to execute when modem goes to sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 334 * @param ptr parameter to callback function
wajahat.abbas@u-blox.com 23:eaab8e812a5d 335 * @return True if successful, otherwise false.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 336 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 337 bool set_power_saving_mode(int periodic_tau, int active_time);
wajahat.abbas@u-blox.com 23:eaab8e812a5d 338
wajahat.abbas@u-blox.com 23:eaab8e812a5d 339 /** Reads the 3GPP PSM status (enabled or disabled) and returns assigned periodic tau and active time values.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 340 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 341 * @param status 0: PSM disabled, 1: PSM enabled
wajahat.abbas@u-blox.com 23:eaab8e812a5d 342 * @param periodic_tau assigned periodic TAU in seconds.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 343 * @param active_time assigned active time in seconds
wajahat.abbas@u-blox.com 23:eaab8e812a5d 344 * @return True if command successful, otherwise false.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 345 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 346 bool get_power_saving_mode(int *status, int *periodic_tau, int *active_time);
wajahat.abbas@u-blox.com 23:eaab8e812a5d 347
wajahat.abbas@u-blox.com 23:eaab8e812a5d 348 /** Wake up the modem from PSM. Ref to comment on set_power_saving_mode, application should call init() or connect()
wajahat.abbas@u-blox.com 23:eaab8e812a5d 349 * before making any other API calls.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 350 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 351 void wakeup_modem();
wajahat.abbas@u-blox.com 23:eaab8e812a5d 352
wajahat.abbas@u-blox.com 23:eaab8e812a5d 353 /** True if the modem is not in PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 354 * otherwise false.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 355 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 356 bool is_modem_awake();
wajahat.abbas@u-blox.com 23:eaab8e812a5d 357 #endif
wajahat.abbas@u-blox.com 23:eaab8e812a5d 358
RobMeades 0:5cffef3371f6 359 protected:
RobMeades 0:5cffef3371f6 360
RobMeades 0:5cffef3371f6 361 #define OUTPUT_ENTER_KEY "\r"
RobMeades 0:5cffef3371f6 362
RobMeades 0:5cffef3371f6 363 #if MBED_CONF_UBLOX_CELL_GEN_DRV_AT_PARSER_BUFFER_SIZE
RobMeades 0:5cffef3371f6 364 #define AT_PARSER_BUFFER_SIZE MBED_CONF_UBLOX_CELL_GEN_DRV_AT_PARSER_BUFFER_SIZE
RobMeades 0:5cffef3371f6 365 #else
RobMeades 0:5cffef3371f6 366 #define AT_PARSER_BUFFER_SIZE 256
RobMeades 0:5cffef3371f6 367 #endif
RobMeades 0:5cffef3371f6 368
RobMeades 0:5cffef3371f6 369 #if MBED_CONF_UBLOX_CELL_GEN_DRV_AT_PARSER_TIMEOUT
RobMeades 0:5cffef3371f6 370 #define AT_PARSER_TIMEOUT MBED_CONF_UBLOX_CELL_GEN_DRV_AT_PARSER_TIMEOUT
RobMeades 0:5cffef3371f6 371 #else
RobMeades 0:5cffef3371f6 372 #define AT_PARSER_TIMEOUT 8*1000 // Milliseconds
RobMeades 0:5cffef3371f6 373 #endif
RobMeades 0:5cffef3371f6 374
RobMeades 0:5cffef3371f6 375 /** A string that would not normally be sent by the modem on the AT interface.
RobMeades 0:5cffef3371f6 376 */
RobMeades 0:5cffef3371f6 377 #define UNNATURAL_STRING "\x01"
RobMeades 0:5cffef3371f6 378
RobMeades 0:5cffef3371f6 379 /** Supported u-blox modem variants.
RobMeades 0:5cffef3371f6 380 */
RobMeades 0:5cffef3371f6 381 typedef enum {
RobMeades 0:5cffef3371f6 382 DEV_TYPE_NONE = 0,
RobMeades 0:5cffef3371f6 383 DEV_SARA_G35,
RobMeades 0:5cffef3371f6 384 DEV_LISA_U2,
RobMeades 0:5cffef3371f6 385 DEV_LISA_U2_03S,
RobMeades 0:5cffef3371f6 386 DEV_SARA_U2,
fahim alavi 11:57f64bc518c0 387 DEV_SARA_R4,
RobMeades 0:5cffef3371f6 388 DEV_LEON_G2,
RobMeades 0:5cffef3371f6 389 DEV_TOBY_L2,
RobMeades 0:5cffef3371f6 390 DEV_MPCI_L2
RobMeades 0:5cffef3371f6 391 } DeviceType;
RobMeades 0:5cffef3371f6 392
RobMeades 0:5cffef3371f6 393 /** Network registration status.
RobMeades 0:5cffef3371f6 394 * UBX-13001820 - AT Commands Example Application Note (Section 4.1.4.5).
RobMeades 0:5cffef3371f6 395 */
RobMeades 0:5cffef3371f6 396 typedef enum {
RobMeades 0:5cffef3371f6 397 GSM = 0,
RobMeades 0:5cffef3371f6 398 COMPACT_GSM = 1,
RobMeades 0:5cffef3371f6 399 UTRAN = 2,
RobMeades 0:5cffef3371f6 400 EDGE = 3,
RobMeades 0:5cffef3371f6 401 HSDPA = 4,
RobMeades 0:5cffef3371f6 402 HSUPA = 5,
RobMeades 0:5cffef3371f6 403 HSDPA_HSUPA = 6,
fahimalavi 10:c4281fa79b8f 404 LTE = 7,
fahim alavi 12:aa3cbc3f88c5 405 EC_GSM_IoT = 8,
fahim alavi 12:aa3cbc3f88c5 406 E_UTRAN_NB_S1 = 9
RobMeades 0:5cffef3371f6 407 } RadioAccessNetworkType;
RobMeades 0:5cffef3371f6 408
RobMeades 0:5cffef3371f6 409 /** Info about the modem.
RobMeades 0:5cffef3371f6 410 */
RobMeades 0:5cffef3371f6 411 typedef struct {
RobMeades 0:5cffef3371f6 412 DeviceType dev;
RobMeades 0:5cffef3371f6 413 char iccid[20 + 1]; //!< Integrated Circuit Card ID.
RobMeades 0:5cffef3371f6 414 char imsi[15 + 1]; //!< International Mobile Station Identity.
RobMeades 0:5cffef3371f6 415 char imei[15 + 1]; //!< International Mobile Equipment Identity.
RobMeades 0:5cffef3371f6 416 char meid[18 + 1]; //!< Mobile Equipment IDentifier.
RobMeades 0:5cffef3371f6 417 volatile RadioAccessNetworkType rat; //!< Type of network (e.g. 2G, 3G, LTE).
RobMeades 0:5cffef3371f6 418 volatile NetworkRegistrationStatusCsd reg_status_csd; //!< Circuit switched attach status.
RobMeades 0:5cffef3371f6 419 volatile NetworkRegistrationStatusPsd reg_status_psd; //!< Packet switched attach status.
RobMeades 0:5cffef3371f6 420 volatile NetworkRegistrationStatusEps reg_status_eps; //!< Evolved Packet Switched (e.g. LTE) attach status.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 421 #ifdef TARGET_UBLOX_C030_R412M
wajahat.abbas@u-blox.com 23:eaab8e812a5d 422 volatile ModemPSMState modem_psm_state; //!< last known modem PSM state
wajahat.abbas@u-blox.com 23:eaab8e812a5d 423 #endif
RobMeades 0:5cffef3371f6 424 } DeviceInfo;
RobMeades 0:5cffef3371f6 425
RobMeades 0:5cffef3371f6 426 /* IMPORTANT: the variables below are available to
RobMeades 0:5cffef3371f6 427 * classes that inherit this in order to keep things
RobMeades 0:5cffef3371f6 428 * simple. However, ONLY this class should free
RobMeades 0:5cffef3371f6 429 * any of the pointers, or there will be havoc.
RobMeades 0:5cffef3371f6 430 */
RobMeades 0:5cffef3371f6 431
RobMeades 0:5cffef3371f6 432 /** Point to the instance of the AT parser in use.
RobMeades 0:5cffef3371f6 433 */
RobMeades 0:5cffef3371f6 434 ATCmdParser *_at;
RobMeades 0:5cffef3371f6 435
RobMeades 0:5cffef3371f6 436 /** The current AT parser timeout value.
RobMeades 0:5cffef3371f6 437 */
RobMeades 0:5cffef3371f6 438 int _at_timeout;
RobMeades 0:5cffef3371f6 439
RobMeades 0:5cffef3371f6 440 /** File handle used by the AT parser.
RobMeades 0:5cffef3371f6 441 */
RobMeades 0:5cffef3371f6 442 FileHandle *_fh;
RobMeades 0:5cffef3371f6 443
RobMeades 0:5cffef3371f6 444 /** The mutex resource.
RobMeades 0:5cffef3371f6 445 */
RobMeades 0:5cffef3371f6 446 Mutex _mtx;
RobMeades 0:5cffef3371f6 447
RobMeades 0:5cffef3371f6 448 /** General info about the modem as a device.
RobMeades 0:5cffef3371f6 449 */
RobMeades 0:5cffef3371f6 450 DeviceInfo _dev_info;
RobMeades 0:5cffef3371f6 451
RobMeades 0:5cffef3371f6 452 /** The SIM PIN to use.
RobMeades 0:5cffef3371f6 453 */
RobMeades 0:5cffef3371f6 454 const char *_pin;
RobMeades 0:5cffef3371f6 455
RobMeades 0:5cffef3371f6 456 /** Set to true to spit out debug traces.
RobMeades 0:5cffef3371f6 457 */
RobMeades 0:5cffef3371f6 458 bool _debug_trace_on;
rob.meades@u-blox.com 4:2e640a101db1 459
rob.meades@u-blox.com 4:2e640a101db1 460 /** The baud rate to the modem.
rob.meades@u-blox.com 4:2e640a101db1 461 */
rob.meades@u-blox.com 4:2e640a101db1 462 int _baud;
RobMeades 0:5cffef3371f6 463
RobMeades 0:5cffef3371f6 464 /** True if the modem is ready register to the network,
RobMeades 0:5cffef3371f6 465 * otherwise false.
RobMeades 0:5cffef3371f6 466 */
RobMeades 0:5cffef3371f6 467 bool _modem_initialised;
RobMeades 0:5cffef3371f6 468
RobMeades 0:5cffef3371f6 469 /** True it the SIM requires a PIN, otherwise false.
RobMeades 0:5cffef3371f6 470 */
RobMeades 0:5cffef3371f6 471 bool _sim_pin_check_enabled;
RobMeades 0:5cffef3371f6 472
RobMeades 0:5cffef3371f6 473 /** Sets the modem up for powering on
RobMeades 0:5cffef3371f6 474 *
RobMeades 0:5cffef3371f6 475 * modem_init() is equivalent to plugging in the device, e.g., attaching power and serial port.
RobMeades 0:5cffef3371f6 476 * Uses onboard_modem_api.h where the implementation of onboard_modem_api is provided by the target.
RobMeades 0:5cffef3371f6 477 */
RobMeades 0:5cffef3371f6 478 virtual void modem_init();
RobMeades 0:5cffef3371f6 479
RobMeades 0:5cffef3371f6 480 /** Sets the modem in unplugged state
RobMeades 0:5cffef3371f6 481 *
RobMeades 0:5cffef3371f6 482 * modem_deinit() will be equivalent to pulling the plug off of the device, i.e., detaching power
RobMeades 0:5cffef3371f6 483 * and serial port. This puts the modem in lowest power state.
RobMeades 0:5cffef3371f6 484 * Uses onboard_modem_api.h where the implementation of onboard_modem_api is provided by the target.
RobMeades 0:5cffef3371f6 485 */
RobMeades 0:5cffef3371f6 486 virtual void modem_deinit();
RobMeades 0:5cffef3371f6 487
RobMeades 0:5cffef3371f6 488 /** Powers up the modem
RobMeades 0:5cffef3371f6 489 *
RobMeades 0:5cffef3371f6 490 * modem_power_up() is equivalent to pressing the soft power button.
RobMeades 0:5cffef3371f6 491 * The driver may repeat this if the modem is not responsive to AT commands.
RobMeades 0:5cffef3371f6 492 * Uses onboard_modem_api.h where the implementation of onboard_modem_api is provided by the target.
RobMeades 0:5cffef3371f6 493 */
RobMeades 0:5cffef3371f6 494 virtual void modem_power_up();
RobMeades 0:5cffef3371f6 495
RobMeades 0:5cffef3371f6 496 /** Powers down the modem
RobMeades 0:5cffef3371f6 497 *
RobMeades 0:5cffef3371f6 498 * modem_power_down() is equivalent to turning off the modem by button press.
RobMeades 0:5cffef3371f6 499 * Uses onboard_modem_api.h where the implementation of onboard_modem_api is provided by the target.
RobMeades 0:5cffef3371f6 500 */
RobMeades 0:5cffef3371f6 501 virtual void modem_power_down();
RobMeades 0:5cffef3371f6 502
RobMeades 0:5cffef3371f6 503 /* Note: constructor and destructor protected so that this
RobMeades 0:5cffef3371f6 504 * class can only ever be inherited, never used directly.
RobMeades 0:5cffef3371f6 505 */
RobMeades 0:5cffef3371f6 506 UbloxCellularBase();
RobMeades 0:5cffef3371f6 507 ~UbloxCellularBase();
RobMeades 0:5cffef3371f6 508
RobMeades 0:5cffef3371f6 509 /** Initialise this class.
RobMeades 0:5cffef3371f6 510 *
RobMeades 0:5cffef3371f6 511 * @param tx the UART TX data pin to which the modem is attached.
RobMeades 0:5cffef3371f6 512 * @param rx the UART RX data pin to which the modem is attached.
RobMeades 0:5cffef3371f6 513 * @param baud the UART baud rate.
RobMeades 0:5cffef3371f6 514 * @param debug_on true to switch AT interface debug on, otherwise false.
RobMeades 0:5cffef3371f6 515 *
RobMeades 0:5cffef3371f6 516 * Note: it would be more natural to do this in the constructor
RobMeades 0:5cffef3371f6 517 * however, to avoid the diamond of death, this class is only
RobMeades 0:5cffef3371f6 518 * every inherited virtually. Classes that are inherited virtually
RobMeades 0:5cffef3371f6 519 * do not get passed parameters in their constructor and hence
RobMeades 0:5cffef3371f6 520 * classInit() must be called separately by the first one to wake
RobMeades 0:5cffef3371f6 521 * the beast.
RobMeades 0:5cffef3371f6 522 */
RobMeades 0:5cffef3371f6 523 void baseClassInit(PinName tx = MDMTXD,
RobMeades 0:5cffef3371f6 524 PinName rx = MDMRXD,
RobMeades 0:5cffef3371f6 525 int baud = MBED_CONF_UBLOX_CELL_BAUD_RATE,
RobMeades 0:5cffef3371f6 526 bool debug_on = false);
RobMeades 0:5cffef3371f6 527
RobMeades 0:5cffef3371f6 528 /** Set the AT parser timeout.
RobMeades 0:5cffef3371f6 529 */
RobMeades 0:5cffef3371f6 530 void at_set_timeout(int timeout);
RobMeades 0:5cffef3371f6 531
RobMeades 0:5cffef3371f6 532 /** Read up to size characters from buf
RobMeades 0:5cffef3371f6 533 * or until the character "end" is reached, overwriting
RobMeades 0:5cffef3371f6 534 * the newline with 0 and ensuring a terminator
RobMeades 0:5cffef3371f6 535 * in all cases.
RobMeades 0:5cffef3371f6 536 *
RobMeades 0:5cffef3371f6 537 * @param buf the buffer to write to.
RobMeades 0:5cffef3371f6 538 * @param size the size of the buffer.
RobMeades 0:5cffef3371f6 539 * @param end the character to stop at.
RobMeades 0:5cffef3371f6 540 * @return the number of characters read,
RobMeades 0:5cffef3371f6 541 * not including the terminator.
RobMeades 0:5cffef3371f6 542 */
RobMeades 0:5cffef3371f6 543 int read_at_to_char(char * buf, int size, char end);
RobMeades 0:5cffef3371f6 544
RobMeades 0:5cffef3371f6 545 /** Powers up the modem.
RobMeades 0:5cffef3371f6 546 *
RobMeades 0:5cffef3371f6 547 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 548 */
RobMeades 0:5cffef3371f6 549 bool power_up();
RobMeades 0:5cffef3371f6 550
RobMeades 0:5cffef3371f6 551 /** Power down the modem.
RobMeades 0:5cffef3371f6 552 */
RobMeades 0:5cffef3371f6 553 void power_down();
RobMeades 0:5cffef3371f6 554
RobMeades 0:5cffef3371f6 555 /** Lock a mutex when accessing the modem.
RobMeades 0:5cffef3371f6 556 */
RobMeades 0:5cffef3371f6 557 void lock(void) { _mtx.lock(); }
RobMeades 0:5cffef3371f6 558
RobMeades 0:5cffef3371f6 559 /** Helper to make sure that lock unlock pair is always balanced
RobMeades 0:5cffef3371f6 560 */
RobMeades 0:5cffef3371f6 561 #define LOCK() { lock()
RobMeades 0:5cffef3371f6 562
RobMeades 0:5cffef3371f6 563 /** Unlock the modem when done accessing it.
RobMeades 0:5cffef3371f6 564 */
RobMeades 0:5cffef3371f6 565 void unlock(void) { _mtx.unlock(); }
RobMeades 0:5cffef3371f6 566
RobMeades 0:5cffef3371f6 567 /** Helper to make sure that lock unlock pair is always balanced
RobMeades 0:5cffef3371f6 568 */
RobMeades 0:5cffef3371f6 569 #define UNLOCK() } unlock()
RobMeades 0:5cffef3371f6 570
RobMeades 0:5cffef3371f6 571 /** Set the device identity in _dev_info
RobMeades 0:5cffef3371f6 572 * based on the ATI string returned by
RobMeades 0:5cffef3371f6 573 * the module.
RobMeades 0:5cffef3371f6 574 *
RobMeades 0:5cffef3371f6 575 * @return true if dev is a known value,
RobMeades 0:5cffef3371f6 576 * otherwise false.
RobMeades 0:5cffef3371f6 577 */
RobMeades 0:5cffef3371f6 578 bool set_device_identity(DeviceType *dev);
RobMeades 0:5cffef3371f6 579
RobMeades 0:5cffef3371f6 580 /** Perform any modem initialisation that is
RobMeades 0:5cffef3371f6 581 * specialised by device type.
RobMeades 0:5cffef3371f6 582 *
RobMeades 0:5cffef3371f6 583 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 584 */
RobMeades 0:5cffef3371f6 585 bool device_init(DeviceType dev);
RobMeades 0:5cffef3371f6 586
RobMeades 0:5cffef3371f6 587 /** Set up the SIM.
RobMeades 0:5cffef3371f6 588 *
RobMeades 0:5cffef3371f6 589 * @return true if successful, otherwiss false.
RobMeades 0:5cffef3371f6 590 */
RobMeades 0:5cffef3371f6 591 bool initialise_sim_card();
RobMeades 0:5cffef3371f6 592
wajahat.abbas@u-blox.com 23:eaab8e812a5d 593 #ifdef TARGET_UBLOX_C030_R412M
wajahat.abbas@u-blox.com 23:eaab8e812a5d 594 /** Converts the given uint to binary string. Fills the given str starting from [0] with the number of bits defined by bit_cnt
wajahat.abbas@u-blox.com 23:eaab8e812a5d 595 * For example uint_to_binary_string(9, str, 10) would fill str "0000001001"
wajahat.abbas@u-blox.com 23:eaab8e812a5d 596 * For example uint_to_binary_string(9, str, 3) would fill str "001"
wajahat.abbas@u-blox.com 23:eaab8e812a5d 597 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 598 * @param num uint to converts to binary string
wajahat.abbas@u-blox.com 23:eaab8e812a5d 599 * @param str buffer for converted binary string
wajahat.abbas@u-blox.com 23:eaab8e812a5d 600 * @param str_size size of the str buffer
wajahat.abbas@u-blox.com 23:eaab8e812a5d 601 * @param bit_cnt defines how many bits are filled to buffer started from lsb
wajahat.abbas@u-blox.com 23:eaab8e812a5d 602 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 603 void uint_to_binary_str(uint32_t num, char* str, int str_size, int bit_cnt);
wajahat.abbas@u-blox.com 23:eaab8e812a5d 604 #endif
wajahat.abbas@u-blox.com 23:eaab8e812a5d 605
RobMeades 0:5cffef3371f6 606 private:
RobMeades 0:5cffef3371f6 607
RobMeades 0:5cffef3371f6 608 void set_nwk_reg_status_csd(int status);
RobMeades 0:5cffef3371f6 609 void set_nwk_reg_status_psd(int status);
RobMeades 0:5cffef3371f6 610 void set_nwk_reg_status_eps(int status);
RobMeades 0:5cffef3371f6 611 void set_rat(int AcTStatus);
RobMeades 0:5cffef3371f6 612 bool get_iccid();
RobMeades 0:5cffef3371f6 613 bool get_imsi();
RobMeades 0:5cffef3371f6 614 bool get_imei();
RobMeades 0:5cffef3371f6 615 bool get_meid();
RobMeades 0:5cffef3371f6 616 bool set_sms();
RobMeades 0:5cffef3371f6 617 void parser_abort_cb();
RobMeades 0:5cffef3371f6 618 void CMX_ERROR_URC();
RobMeades 0:5cffef3371f6 619 void CREG_URC();
RobMeades 0:5cffef3371f6 620 void CGREG_URC();
RobMeades 0:5cffef3371f6 621 void CEREG_URC();
RobMeades 0:5cffef3371f6 622 void UMWI_URC();
wajahat.abbas@u-blox.com 23:eaab8e812a5d 623 #ifdef TARGET_UBLOX_C030_R412M
wajahat.abbas@u-blox.com 23:eaab8e812a5d 624 void UUPSMR_URC();
wajahat.abbas@u-blox.com 23:eaab8e812a5d 625 bool _psm_status;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 626 void *_cb_param_psm_going_in;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 627 Callback<void(void*)> _func_psm_going_in; /**< Callback. */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 628 void *_cb_param_psm_coming_out;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 629 Callback<void(void*)> _func_psm_coming_out; /**< Callback. */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 630 void set_modem_psm_state(int state);
wajahat.abbas@u-blox.com 23:eaab8e812a5d 631 #endif
RobMeades 0:5cffef3371f6 632 };
RobMeades 0:5cffef3371f6 633
rob.meades@u-blox.com 1:5aaecf2572dc 634 #endif // _UBLOX_CELLULAR_BASE_
RobMeades 0:5cffef3371f6 635