GNSS

Dependents:   ublox-at-cellular-interface-ext

Fork of ublox-at-cellular-interface by u-blox

Revision:
0:7ccf0e7e8a83
Child:
1:bc228becc45d
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/UbloxATCellularInterface.h	Mon Jun 12 21:32:21 2017 +0000
@@ -0,0 +1,625 @@
+/* Copyright (c) 2017 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef _UBLOX_CELLULAR_DRIVER_GEN_AT_DATA_
+#define _UBLOX_CELLULAR_DRIVER_GEN_AT_DATA_
+
+#include "ublox_modem_driver/UbloxCellularBase.h"
+#include "netsocket/CellularBase.h"
+#include "NetworkStack.h"
+
+/** UbloxATCellularInterface class.
+ *
+ *  This uses the cellular-tuned IP stack that
+ *  is on-board the cellular modem instead of the
+ *  LWIP stack on the mbed MCU.
+ *
+ *  There are three advantages to using this mechanism:
+ *
+ *  1.  Since the modem interface remains in AT mode
+ *      throughout, it is possible to continue using
+ *      any AT commands (e.g. send SMS, use the module's
+ *      file system, etc.) while the connection is up.
+ *
+ *  2.  The UbloxATCellularInterfaceExt class can
+ *      be used to perform very simple HTTP and FTP
+ *      operations using the modem's on-board clients.
+ *
+ *  3.  LWIP is not required (and hence RAM is saved).
+ *
+ *  The disadvantage is that some additional parsing
+ *  (at the AT interface) has to go on in order to exchange
+ *  IP packets, so this is less efficient under heavy loads.
+ *  Also TCP Server and getting/setting of socket options is
+ *  currently not supported.
+ */
+
+// Forward declaration
+class NetworkStack;
+
+/*
+ * NOTE: order is important in the inheritance below!  PAL takes this class
+ * and casts it to CellularInterface and so CellularInterface has to be first
+ * in the last for that to work.
+ */
+
+/** UbloxATCellularInterface class.
+ *
+ *  This class implements the network stack interface into the cellular
+ *  modems on the C030 and C027 boards for 2G/3G/4G modules using
+ *  the IP stack running on the cellular module.
+ */
+class UbloxATCellularInterface : public CellularBase, public NetworkStack, virtual public UbloxCellularBase  {
+
+public:
+    /** Constructor.
+     *
+     * @param tx       the UART TX data pin to which the modem is attached.
+     * @param rx       the UART RX data pin to which the modem is attached.
+     * @param baud     the UART baud rate.
+     * @param debug_on true to switch AT interface debug on, otherwise false.
+     */
+     UbloxATCellularInterface(PinName tx = MDMTXD,
+                              PinName rx = MDMRXD,
+                              int baud = MBED_CONF_UBLOX_CELL_BAUD_RATE,
+                              bool debug_on = false);
+
+     /* Destructor.
+      */
+     virtual ~UbloxATCellularInterface();
+
+    /** The amount of extra space needed in terms of AT interface
+     * characters to get a chunk of user data (i.e. one UDP packet
+     * or a portion of a TCP packet) across the AT interface.
+     */
+    #define AT_PACKET_OVERHEAD 77
+
+    /** The profile to use (on board the modem).
+     */
+    #define PROFILE "0"
+
+    /** Translates a host name to an IP address with specific IP version.
+     *
+     *  The host name may be either a domain name or an IP address. If the
+     *  host name is an IP address, no network transactions will be performed.
+     *
+     *  If no stack-specific DNS resolution is provided, the host name
+     *  will be resolved using a UDP socket on the stack.
+     *
+     *  @param host     Host name to resolve.
+     *  @param address  Destination for the host SocketAddress.
+     *  @param version  IP version of address to resolve, NSAPI_UNSPEC indicates
+     *                  version is chosen by the stack (defaults to NSAPI_UNSPEC).
+     *  @return         0 on success, negative error code on failure.
+     */
+    virtual nsapi_error_t gethostbyname(const char *host,
+                                        SocketAddress *address,
+                                        nsapi_version_t version = NSAPI_UNSPEC);
+
+    /** Set the authentication scheme.
+     *
+     *  @param auth      The authentication scheme, chose from
+     *                   NSAPI_SECURITY_NONE, NSAPI_SECURITY_PAP,
+     *                   NSAPI_SECURITY_CHAP or NSAPI_SECURITY_UNKNOWN;
+     *                   use NSAPI_SECURITY_UNKNOWN to try all of none,
+     *                   PAP and CHAP.
+     */
+    virtual void set_authentication(nsapi_security_t auth);
+
+    /** Set the cellular network credentials.
+     *
+     *  Please check documentation of connect() for default behaviour of APN settings.
+     *
+     *  @param apn      Access point name.
+     *  @param uname    Optionally, user name.
+     *  @param pwd      Optionally, password.
+     */
+    virtual void set_credentials(const char *apn, const char *uname = 0,
+                                 const char *pwd = 0);
+
+    /** Set the PIN code for the SIM card.
+     *
+     *  @param sim_pin      PIN for the SIM card.
+     */
+    virtual void set_sim_pin(const char *sim_pin);
+
+    /** Connect to the cellular network and start the interface.
+     *
+     *  Attempts to connect to a cellular network.  Note: if init() has
+     *  not been called beforehand, connect() will call it first.
+     *
+     *  @param sim_pin     PIN for the SIM card.
+     *  @param apn         Optionally, access point name.
+     *  @param uname       Optionally, user name.
+     *  @param pwd         Optionally, password.
+     *  @return            NSAPI_ERROR_OK on success, or negative error code on failure.
+     */
+    virtual nsapi_error_t connect(const char *sim_pin, const char *apn = 0,
+                                  const char *uname = 0, const char *pwd = 0);
+
+    /** Attempt to connect to the cellular network.
+     *
+     *  Brings up the network interface. Connects to the cellular radio
+     *  network and then brings up IP stack on the cellular modem to be used
+     *  indirectly via AT commands, rather than LWIP.  Note: if init() has
+     *  not been called beforehand, connect() will call it first.
+     *  NOTE: even a failed attempt to connect will cause the modem to remain
+     *  powered up.  To power it down, call deinit().
+     *
+     *  For APN setup, default behaviour is to use 'internet' as APN string
+     *  and assuming no authentication is required, i.e., user name and password
+     *  are not set. Optionally, a database lookup can be requested by turning
+     *  on the APN database lookup feature. The APN database is by no means
+     *  exhaustive (feel free to submit a pull request with additional values).
+     *  It contains a short list of some public APNs with publicly available
+     *  user names and passwords (if required) in some particular countries only.
+     *  Lookup is done using IMSI (International mobile subscriber identifier).
+     *
+     *  The preferred method is to setup APN using 'set_credentials()' API.
+     *
+     *  If you find that the AT interface returns "CONNECT" but shortly afterwards
+     *  drops the connection then 99% of the time this will be because the APN
+     *  is incorrect.
+     *
+     *  @return            0 on success, negative error code on failure.
+     */
+    virtual nsapi_error_t connect();
+
+    /** Attempt to disconnect from the network.
+     *
+     *  Brings down the network interface.
+     *  Does not bring down the Radio network.
+     *
+     *  @return            0 on success, negative error code on failure.
+     */
+    virtual nsapi_error_t disconnect();
+
+    /** Adds or removes a SIM facility lock.
+     *
+     * Can be used to enable or disable SIM PIN check at device startup.
+     *
+     * @param set          Can be set to true if the SIM PIN check is supposed
+     *                     to be enabled and vice versa.
+     * @param immediate    If true, change the SIM PIN now, else set a flag
+     *                     and make the change only when connect() is called.
+     *                     If this is true and init() has not been called previously,
+     *                     it will be called first.
+     * @param sim_pin      The current SIM PIN, must be a const.  If this is not
+     *                     provided, the SIM PIN must have previously been set by a
+     *                     call to set_sim_pin().
+     * @return             0 on success, negative error code on failure.
+     */
+    nsapi_error_t set_sim_pin_check(bool set, bool immediate = false,
+                                    const char *sim_pin = NULL);
+
+    /** Change the PIN for the SIM card.
+     *
+     * Provide the new PIN for your SIM card with this API.  It is ONLY possible to
+     * change the SIM PIN when SIM PIN checking is ENABLED.
+     *
+     * @param new_pin    New PIN to be used in string format, must be a const.
+     * @param immediate  If true, change the SIM PIN now, else set a flag
+     *                   and make the change only when connect() is called.
+     *                   If this is true and init() has not been called previously,
+     *                   it will be called first.
+     * @param old_pin    Old PIN, must be a const.  If this is not provided, the SIM PIN
+     *                   must have previously been set by a call to set_sim_pin().
+     * @return           0 on success, negative error code on failure.
+     */
+    nsapi_error_t set_new_sim_pin(const char *new_pin, bool immediate = false,
+                                  const char *old_pin = NULL);
+
+    /** Check if the connection is currently established or not.
+     *
+     * @return          True if connected to a data network, otherwise false.
+     */
+    virtual bool is_connected();
+
+    /** Get the local IP address
+     *
+     *  @return         Null-terminated representation of the local IP address
+     *                  or null if no IP address has been received.
+     */
+    virtual const char *get_ip_address();
+
+    /** Get the local network mask.
+     *
+     *  @return         Null-terminated representation of the local network mask
+     *                  or null if no network mask has been received.
+     */
+    virtual const char *get_netmask();
+
+    /** Get the local gateways.
+     *
+     *  @return         Null-terminated representation of the local gateway
+     *                  or null if no network mask has been received.
+     */
+    virtual const char *get_gateway();
+
+    /** Call back in case connection is lost.
+     *
+     * @param cb     The function to call.
+     */
+    void connection_status_cb(Callback<void(nsapi_error_t)> cb);
+
+protected:
+
+    /** Socket "unused" value.
+     */
+    #define SOCKET_UNUSED -1
+
+    /** Socket timeout value in milliseconds.
+     * Note: the sockets layer above will retry the
+     * call to the functions here when they return NSAPI_ERROR_WOULD_BLOCK
+     * and the user has set a larger timeout or full blocking.
+     */
+    #define SOCKET_TIMEOUT 1000
+
+    /** The maximum number of bytes in a packet that can be written
+     * to the AT interface in one go.
+     */
+    #define MAX_WRITE_SIZE 1024
+
+    /** The maximum number of bytes in a packet that can be read from
+     * from the AT interface in one go.
+     */
+    #define MAX_READ_SIZE 1024
+
+    /** Management structure for sockets.
+     */
+    typedef struct {
+        int modem_handle;  //!< The modem's handle for the socket.
+        volatile nsapi_size_t pending; //!< The number of received bytes pending.
+        void (*callback)(void *); //!< A callback for events.
+        void *data; //!< A data pointer that must be passed to the callback.
+    } SockCtrl;
+
+    /** Sockets storage.
+     */
+    SockCtrl _sockets[7];
+
+    /** Storage for a single IP address.
+     */
+    char *_ip;
+
+    /** The APN to use.
+     */
+    const char *_apn;
+
+    /** The user name to use.
+     */
+    const char *_uname;
+
+    /** The password to use.
+     */
+    const char *_pwd;
+
+    /** The type of authentication to use.
+     */
+    nsapi_security_t _auth;
+
+    /** Get the next set of credentials from the database.
+     */
+    virtual void get_next_credentials(const char * config);
+
+    /** Activate one of the on-board modem's connection profiles.
+     *
+     * @param apn      The APN to use.
+     * @param username The user name to use.
+     * @param password The password to use.
+     * @param auth     The authentication method to use
+     *                 (NSAPI_SECURITY_NONE, NSAPI_SECURITY_PAP,
+     *                 NSAPI_SECURITY_CHAP or NSAPI_SECURITY_UNKNOWN).
+     * @return         True if successful, otherwise false.
+     */
+    virtual bool activate_profile(const char* apn, const char* username,
+                                  const char* password, nsapi_security_t auth);
+
+    /** Activate a profile using the existing external connection.
+     *
+     * @return true if successful, otherwise false.
+     */
+    virtual bool activate_profile_reuse_external(void);
+
+    /** Activate a profile based on connection ID.
+     *
+     * @param cid       The connection ID.
+     * @param apn       The APN to use.
+     * @param username  The user name to use.
+     * @param password  The password to use.
+     * @param auth      The authentication method to use.
+     * @return          True if successful, otherwise false.
+     */
+    virtual bool activate_profile_by_cid(int cid, const char* apn, const char* username,
+                                         const char* password, nsapi_security_t auth);
+
+    /** Connect the on board IP stack of the modem.
+     *
+     * @return         True if successful, otherwise false.
+     */
+    virtual bool connect_modem_stack();
+
+    /** Disconnect the on board IP stack of the modem.
+     *
+     * @return         True if successful, otherwise false.
+     */
+    virtual bool disconnect_modem_stack();
+
+    /** Provide access to the NetworkStack object
+     *
+     *  @return        The underlying NetworkStack object.
+     */
+    virtual NetworkStack *get_stack();
+
+protected:
+
+    /** Open a socket.
+     *
+     *  Creates a network socket and stores it in the specified handle.
+     *  The handle must be passed to following calls on the socket.
+     *
+     *  @param handle   Destination for the handle to a newly created socket.
+     *  @param proto    Protocol of socket to open, NSAPI_TCP or NSAPI_UDP.
+     *  @return         0 on success, negative error code on failure.
+     */
+    virtual nsapi_error_t socket_open(nsapi_socket_t *handle,
+                                      nsapi_protocol_t proto);
+
+    /** Close a socket.
+     *
+     *  Closes any open connection and deallocates any memory associated
+     *  with the socket.
+     *
+     *  @param handle   Socket handle.
+     *  @return         0 on success, negative error code on failure.
+     */
+    virtual nsapi_error_t socket_close(nsapi_socket_t handle);
+
+    /** Bind a specific port to a socket.
+     *
+     *  Binding a socket specifies port on which to receive
+     *  data. The IP address is ignored.  Note that binding
+     *  a socket involves closing it and reopening and so the
+     *  bind operation should be carried out before any others.
+     *
+     *  @param handle   Socket handle.
+     *  @param address  Local address to bind (of which only the port is used).
+     *  @return         0 on success, negative error code on failure.
+     */
+    virtual nsapi_error_t socket_bind(nsapi_socket_t handle,
+                                      const SocketAddress &address);
+
+    /** Connects TCP socket to a remote host.
+     *
+     *  Initiates a connection to a remote server specified by the
+     *  indicated address.
+     *
+     *  @param handle   Socket handle.
+     *  @param address  The SocketAddress of the remote host.
+     *  @return         0 on success, negative error code on failure.
+     */
+    virtual nsapi_error_t socket_connect(nsapi_socket_t handle,
+                                         const SocketAddress &address);
+
+    /** Send data over a TCP socket.
+     *
+     *  The socket must be connected to a remote host. Returns the number of
+     *  bytes sent from the buffer.  This class sets no upper buffer limit on
+     *  buffer size and the maximum packet size is not connected with the
+     *  platform.buffered-serial-txbuf-size/platform.buffered-serial-rxbuf-size
+     *  definitions.
+     *
+     *  @param handle   Socket handle.
+     *  @param data     Buffer of data to send to the host.
+     *  @param size     Size of the buffer in bytes.
+     *  @return         Number of sent bytes on success, negative error
+     *                  code on failure.
+     */
+    virtual nsapi_size_or_error_t socket_send(nsapi_socket_t handle,
+                                              const void *data, nsapi_size_t size);
+
+    /** Send a packet over a UDP socket.
+     *
+     *  Sends data to the specified address. Returns the number of bytes
+     *  sent from the buffer.
+     *
+     *  PACKET SIZES: the maximum packet size that can be sent in a single
+     *  UDP packet is limited by the configuration value
+     *  platform.buffered-serial-txbuf-size (defaults to 256).
+     *  The maximum UDP packet size is:
+     *
+     *  platform.buffered-serial-txbuf-size - AT_PACKET_OVERHEAD
+     *
+     *  ...with a limit of 1024 bytes (at the AT interface). So, to allow sending
+     *  of a 1024 byte UDP packet, edit your mbed_app.json to add a target override
+     *  setting platform.buffered-serial-txbuf-size to 1101.  However, for
+     *  UDP packets, 508 bytes is considered a more realistic size, taking into
+     *  account fragmentation sizes over the public internet, which leads to a
+     *  platform.buffered-serial-txbuf-size/platform.buffered-serial-rxbuf-size
+     *  setting of 585.
+     *
+     *  If size is larger than this limit, the data will be split across separate
+     *  UDP packets.
+     *
+     *  @param handle   Socket handle.
+     *  @param address  The SocketAddress of the remote host.
+     *  @param data     Buffer of data to send to the host.
+     *  @param size     Size of the buffer in bytes.
+     *  @return         Number of sent bytes on success, negative error
+     *                  code on failure.
+     */
+    virtual nsapi_size_or_error_t socket_sendto(nsapi_socket_t handle,
+                                                const SocketAddress &address,
+                                                const void *data,
+                                                nsapi_size_t size);
+
+    /** Receive data over a TCP socket.
+     *
+     *  The socket must be connected to a remote host. Returns the number of
+     *  bytes received into the buffer.  This class sets no upper limit on the
+     *  buffer size and the maximum packet size is not connected with the
+     *  platform.buffered-serial-txbuf-size/platform.buffered-serial-rxbuf-size
+     *  definitions.
+     *
+     *  @param handle   Socket handle.
+     *  @param data     Destination buffer for data received from the host.
+     *  @param size     Size of the buffer in bytes.
+     *  @return         Number of received bytes on success, negative error
+     *                  code on failure.
+     */
+    virtual nsapi_size_or_error_t socket_recv(nsapi_socket_t handle,
+                                              void *data, nsapi_size_t size);
+
+    /** Receive a packet over a UDP socket.
+     *
+     *  Receives data and stores the source address in address if address
+     *  is not NULL. Returns the number of bytes received into the buffer.
+     *
+     *  PACKET SIZES: the maximum packet size that can be retrieved in a
+     *  single call to this method is limited by the configuration value
+     *  platform.buffered-serial-rxbuf-size (default 256).  The maximum
+     *  UDP packet size is:
+     *
+     *  platform.buffered-serial-rxbuf-size - AT_PACKET_OVERHEAD
+     *
+     *  ...with a limit of 1024 (at the AT interface). So to allow reception of a
+     *  1024 byte UDP packet in a single call, edit your mbed_app.json to add a
+     *  target override setting platform.buffered-serial-rxbuf-size to 1101.
+     *
+     *  If the received packet is larger than this limit, any remainder will
+     *  be returned in subsequent calls to this method.  Once a single UDP
+     *  packet has been received, this method will return.
+     *
+     *  @param handle   Socket handle.
+     *  @param address  Destination for the source address or NULL.
+     *  @param data     Destination buffer for data received from the host.
+     *  @param size     Size of the buffer in bytes.
+     *  @return         Number of received bytes on success, negative error
+     *                  code on failure.
+     */
+    virtual nsapi_size_or_error_t socket_recvfrom(nsapi_socket_t handle,
+                                                  SocketAddress *address,
+                                                  void *data, nsapi_size_t size);
+
+    /** Register a callback on state change of the socket.
+     *
+     *  The specified callback will be called on state changes such as when
+     *  the socket can recv/send/accept successfully and on when an error
+     *  occurs. The callback may also be called spuriously without reason.
+     *
+     *  The callback may be called in an interrupt context and should not
+     *  perform expensive operations such as recv/send calls.
+     *
+     *  @param handle   Socket handle.
+     *  @param callback Function to call on state change.
+     *  @param data     Argument to pass to callback.
+     */
+    virtual void socket_attach(nsapi_socket_t handle, void (*callback)(void *),
+                               void *data);
+
+    /** Listen for connections on a TCP socket.
+     *
+     *  Marks the socket as a passive socket that can be used to accept
+     *  incoming connections.
+     *
+     *  @param handle   Socket handle.
+     *  @param backlog  Number of pending connections that can be queued
+     *                  simultaneously, defaults to 1.
+     *  @return         0 on success, negative error code on failure.
+     */
+    virtual nsapi_error_t socket_listen(nsapi_socket_t handle, int backlog);
+
+    /** Accepts a connection on a TCP socket.
+     *
+     *  The server socket must be bound and set to listen for connections.
+     *  On a new connection, creates a network socket and stores it in the
+     *  specified handle. The handle must be passed to following calls on
+     *  the socket.
+     *
+     *  A stack may have a finite number of sockets, in this case
+     *  NSAPI_ERROR_NO_SOCKET is returned if no socket is available.
+     *
+     *  This call is non-blocking. If accept would block,
+     *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
+     *
+     *  @param server   Socket handle to server to accept from.
+     *  @param handle   Destination for a handle to the newly created socket.
+     *  @param address  Destination for the remote address or NULL.
+     *  @return         0 on success, negative error code on failure.
+     */
+    virtual nsapi_error_t socket_accept(nsapi_socket_t server,
+                                        nsapi_socket_t *handle,
+                                        SocketAddress *address = 0);
+
+    /**  Set stack-specific socket options.
+     *
+     *  The setsockopt allow an application to pass stack-specific hints
+     *  to the underlying stack. For unsupported options,
+     *  NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.
+     *
+     *  @param handle   Socket handle.
+     *  @param level    Stack-specific protocol level.
+     *  @param optname  Stack-specific option identifier.
+     *  @param optval   Option value.
+     *  @param optlen   Length of the option value.
+     *  @return         0 on success, negative error code on failure.
+     */
+    virtual nsapi_error_t setsockopt(nsapi_socket_t handle, int level,
+                                     int optname, const void *optval,
+                                     unsigned optlen);
+
+    /**  Get stack-specific socket options.
+     *
+     *  The getstackopt allow an application to retrieve stack-specific hints
+     *  from the underlying stack. For unsupported options,
+     *  NSAPI_ERROR_UNSUPPORTED is returned and optval is unmodified.
+     *
+     *  @param handle   Socket handle.
+     *  @param level    Stack-specific protocol level.
+     *  @param optname  Stack-specific option identifier.
+     *  @param optval   Destination for option value.
+     *  @param optlen   Length of the option value.
+     *  @return         0 on success, negative error code on failure.
+     */
+    virtual nsapi_error_t getsockopt(nsapi_socket_t handle, int level,
+                                     int optname, void *optval,
+                                     unsigned *optlen);
+
+private:
+
+    // u_ added to namespace us somewhat as this darned macro
+    // is defined by everyone and their dog
+    #define u_stringify(a) str(a)
+    #define str(a) #a
+
+    bool _sim_pin_check_change_pending;
+    bool _sim_pin_check_change_pending_enabled_value;
+    bool _sim_pin_change_pending;
+    const char *_sim_pin_change_pending_new_pin_value;
+    Thread event_thread;
+    void handle_event();
+    SockCtrl * find_socket(int modem_handle = SOCKET_UNUSED);
+    void clear_socket(SockCtrl * socket);
+    bool check_socket(SockCtrl * socket);
+    int nsapi_security_to_modem_security(nsapi_security_t nsapi_security);
+    Callback<void(nsapi_error_t)> _connection_status_cb;
+    void UUSORD_URC();
+    void UUSORF_URC();
+    void UUSOCL_URC();
+    void UUPSDD_URC();
+};
+
+#endif // _UBLOX_CELLULAR_DRIVER_GEN_AT_DATA_
+