Ernest Williams
The purpose of this project was to create a system that would allow users to monitor a locked device using a Bluetooth device. This Bluetooth device will show the last user that unlocked the device, and also allows the user to unlock the device using the Bluetooth device. This device can be physically unlocked using a capacitive touch keypad sensor.
Dependencies: mbed Motor Servo
Fork of
SerialPassthrough_LPC1768
by 
jim hamblen
Revision 4:ba9100d52e48, committed 2015-04-27
- Comitter:
- mbedAustin
- Date:
- Mon Apr 27 21:32:55 2015 +0000
- Parent:
- 3:0393f97fd8cf
- Child:
- 5:96cb82af9996
- Commit message:
- esptool works! changed serial -> rawserial
Changed in this revision
| main.cpp | Show annotated file Show diff for this revision Revisions of this file |
--- a/main.cpp Mon Apr 27 21:23:36 2015 +0000
+++ b/main.cpp Mon Apr 27 21:32:55 2015 +0000
@@ -1,37 +1,37 @@
#include "mbed.h"
-RawSerial pc(USBTX, USBRX); // computer to mbed board
-RawSerial esp(D1, D0); // mbed board to target board
+// Program to use the mbed as a serial bridge
+//
+RawSerial pc(USBTX, USBRX); // tx, rx
+RawSerial dev(D1, D0); // tx, rx
-int
-main()
+void send()
{
- pc.baud(115200);
- esp.baud(115200);
- wait(0.1);
- pc.printf("\r\n########### ready ###########\r\n");
- esp.printf("AT+RST\r\n");
- while(1) {
- if(pc.readable()) {
- char c = pc.getc();
- //pc.putc(c); // echo character back to computer for sanity
- //if(c == '\r'){
-// esp.printf("\r\n");
-// }
-// else{
- esp.putc(c);
-// }
- }
- if(esp.readable()) {
- char c = esp.getc();
- //if(c == '\n'){
-// pc.printf("\\n");
-// }
-// if(c == '\r'){
-// pc.printf("\\r");
-// }
-
- pc.putc(c);
- }
+ while (pc.readable()) {
+ dev.putc(pc.getc());
}
}
+
+void recv()
+{
+ pc.putc(dev.getc());
+}
+
+int main()
+{
+ char c;
+
+ // PC serial
+ pc.baud(9600);
+ pc.attach(send, Serial::RxIrq);
+
+ // Device serial
+ dev.baud(9600);
+
+ wait(0.1);
+ dev.printf("AT+RST\r\n"); // Reset esp device
+ while(1) {
+ c = dev.getc();
+ pc.putc(c);
+ }
+}