Erastus Coetzee
myeerste
Diff: main.cpp
- Revision:
- 4:6dbe7ec75eca
- Parent:
- 3:2e7c3a890019
- Child:
- 5:2384dc3e74fa
--- a/main.cpp Sat Feb 07 13:19:43 2015 +0000
+++ b/main.cpp Sat Feb 07 13:27:52 2015 +0000
@@ -1,104 +1,97 @@
#include "mbed.h"
-#ifdef TARGET_UBLOX_C027
- #include "C027_api.h"
-#else
- #error "This example is targeted for the C027 platform"
-#endif
+//#ifdef TARGET_UBLOX_C027
+#include "C027_api.h"
+//#else
+//#error "This example is targeted for the C027 platform"
+//#endif
#include "gpio_api.h"
+Serial pc(USBTX, USBRX); // tx, rx
+
DigitalOut myled (LED);
#define Generator = p36;
-//ifdef =
+//ifdef =
// PortIn p(Port2, 0x0000003F); // p21-p26
void digitalout( int Status)
- {
+{
}
float AnalogIn ( int BattV)
- {
+{
float V;
-
+
return (V);
- }
-
-int main() {
+}
+
+int main()
+{
int PowerI, LoopCounterI, PowerStatusI, Invertor1I, Invertor2I, Invertor3I, Invertor4I;
int EnableInvertorsI, NoStartI, GenStatusI, LedI, GenOn, GenOff;
float BattVoltageF;
-
+
PowerI = 0;
EnableInvertorsI = LoopCounterI = 0;
GenStatusI = PowerStatusI = NoStartI = 0;
Invertor1I = Invertor2I = Invertor3I = Invertor4I = 0;
uint32_t gpio_set(PinName pin);
+ pc.printf("Hello World!\n");
// sms ( "Startup");
// DigitalOut( LED); // set all relays off
- while(1)
- {
+ while(1) {
PowerStatusI = DigitalIn( P2_0); // get main power status
if ( PowerStatusI )
- if ( GenStatusI)
- {
- if ( LoopCounterI++ > 6000) // If power is off for 10 minutes
- {
- // sms( poweroff);
- wait( 300);
- // sms ( starting gen);
- do
- {
- LedI = !LedI;
+ if ( GenStatusI) {
+ if ( LoopCounterI++ > 6000) { // If power is off for 10 minutes
+ // sms( poweroff);
+ wait( 300);
+ // sms ( starting gen);
+ do {
+ LedI = !LedI;
// myled( LedI ); // Toggle LED
- if ( !GenStatusI ) // If no generator Voltage
- digitalout( 0); // Start Generator
- wait( 100);
- GenStatusI = DigitalIn( P2_1);
- if( GenStatusI) // check for generator Voltage = 220V
- {
- digitalout( GenOff); // stop starting generator
- // sms( GenOn);
- } else
- if ( NoStartI ++ > 30) // try for 3 seconds
- {
+ if ( !GenStatusI ) // If no generator Voltage
+ digitalout( 0); // Start Generator
+ wait( 100);
+ GenStatusI = DigitalIn( P2_1);
+ if( GenStatusI) { // check for generator Voltage = 220V
+ digitalout( GenOff); // stop starting generator
+ // sms( GenOn);
+ } else if ( NoStartI ++ > 30) { // try for 3 seconds
// sms( genrator not started);
- do
- {
+ do {
digitalout( GenOff); // Set Generator off
wait ( 400); // Wait for 2 seconds
GenStatusI = DigitalIn( P2_1);
if ( GenStatusI )
NoStartI = 0;
- } while ( NoStartI-- > 0);
-
- }
+ } while ( NoStartI-- > 0);
+
+ }
} while ( GenStatusI == 0);
- digitalout( GenOff); // set start to off
- // sms( GenStarted);
- if ( GenStatusI) // if Gen on close relays
- {
- // sms( "starting inv 1");
- // myled( myled); // set LED on
- digitalout ( 1 ); // start invertor 1
- wait ( 500);
- // sms( "Starting inv 2");
- digitalout( 2); // start invertor 2
- wait ( 500);
- // sms( "Starting inv 3");
- digitalout( 3 ); // start invertor 3
- wait ( 500);
- // sms( "Starting inv 4");
- digitalout( 4 ); // start invertor 4
- wait ( 500);
- // sms( "Starting Aircon");
- digitalout( 5 ); // start aircon
+ digitalout( GenOff); // set start to off
+ // sms( GenStarted);
+ if ( GenStatusI) { // if Gen on close relays
+ // sms( "starting inv 1");
+// myled( myled); // set LED on
+ digitalout ( 1 ); // start invertor 1
+ wait ( 500);
+ // sms( "Starting inv 2");
+ digitalout( 2); // start invertor 2
+ wait ( 500);
+ // sms( "Starting inv 3");
+ digitalout( 3 ); // start invertor 3
+ wait ( 500);
+ // sms( "Starting inv 4");
+ digitalout( 4 ); // start invertor 4
+ wait ( 500);
+ // sms( "Starting Aircon");
+ digitalout( 5 ); // start aircon
}
}
- } else if ( GenStatusI)
- {
- if ( -- LoopCounterI <= 0)
- {
+ } else if ( GenStatusI) {
+ if ( -- LoopCounterI <= 0) {
// sms( "Eskom On ");
// sms( "Aircon to Eskom");
digitalout( 0 ); // start aircon
@@ -114,20 +107,18 @@
digitalout( 3 ); // start invertor 3
wait ( 1000);
// sms( "Invertoer 4 to Eskom");
- digitalout( 4 ); // start invertor 4
- } else
- LoopCounterI = 0;
- } else
- {
+ digitalout( 4 ); // start invertor 4
+ } else
+ LoopCounterI = 0;
+ } else {
// BattVoltageF = AnalogIn( 1); // Batt V
BattVoltageF *= 0.1039;
- if ( BattVoltageF < 24.00)
- {
+ if ( BattVoltageF < 24.00) {
// sms( Voltage low);
- }
}
+ }
// myled = !myled;
wait(1000); // wait 1 sec
// myled( LedI);
- } // main loop while
+ } // main loop while
}