Diff: main.cpp

Revision:

0:54828b08e71d

diff -r 000000000000 -r 54828b08e71d main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Wed Nov 20 08:26:28 2013 +0000
@@ -0,0 +1,228 @@
+/******************************************************************************
+ * Includes
+ *****************************************************************************/
+#include "mbed.h"
+#include "XBee.h"
+
+/******************************************************************************
+ * Typedefs and defines
+ *****************************************************************************/
+
+// define NODE_IS_COORDINATOR if this board should act
+// as XBee coordinator. Make sure it is undefined it the board
+// should act as End-Device
+#define NODE_IS_COORDINATOR (1)
+
+#define CMD_BTN_MSG (0)
+#define CMD_ACK_MSG (1)
+
+/******************************************************************************
+ * Local variables
+ *****************************************************************************/
+
+static XBee xbee(P0_4, P0_0, P0_17, P0_7); //tx,rx,reset,sleep
+
+static Serial pc(USBTX, USBRX); // tx, rx
+
+// all LEDs active low
+static DigitalOut xbeeInitLed(D13);
+static DigitalOut remoteBtnLed(D12);
+static DigitalOut ackLed(D11);
+static DigitalOut led4(D10);
+
+static DigitalIn button(D3);
+static bool xbeeIsUp = false;
+
+/******************************************************************************
+ * Local functions
+ *****************************************************************************/
+
+static void xbeeDeviceUp(void) {
+    xbeeIsUp = true;
+}
+
+static void xbeeDeviceDown(void) {
+    xbeeIsUp = false;
+}
+
+static void xbeeNodeFound(void) {
+    uint32_t addrHi = 0;
+    uint32_t addrLo = 0;
+    uint8_t rssi = 0;
+
+    xbee.getRemoteAddress(&addrHi, &addrLo);
+    xbee.getRssi(&rssi);
+
+    pc.printf("XBee: node found: hi=%lx, lo=%lx, rssi=%d\n",
+            addrHi, addrLo, rssi);
+}
+
+static void xbeeTxStat(void) {
+
+    uint8_t frameId = 0;
+    XBee::XBeeTxStatus status = XBee::TxStatusOk;
+
+    xbee.getTxStatus(&frameId, &status);
+
+    pc.printf("XBee: Tx Stat. Id=%u, status=%d\n", frameId, (int)status);
+}
+
+
+
+static void xbeeDataAvailable(void) {
+    char* data = NULL;
+    char ackMsg = CMD_ACK_MSG;
+    uint8_t frameId = 0;
+    uint8_t len = 0;
+    uint32_t addrHi = 0;
+    uint32_t addrLo = 0;
+    uint8_t rssi = 0;
+
+    xbee.getRemoteAddress(&addrHi, &addrLo);
+    xbee.getData(&data, &len);
+    xbee.getRssi(&rssi);
+
+    pc.printf("XBee: Data available: len=%d hi=%lx, lo=%lx, rssi=%d\n",
+            (int)len, addrHi, addrLo, rssi);
+
+    if (len > 0) {
+
+        switch(data[0]) {
+        case CMD_BTN_MSG:
+            if (len > 1) {
+                // change led to indicate button state
+                remoteBtnLed = ((data[1] == 1) ? 1 : 0);
+
+
+                // Send an ACK directly to the remote node (only for
+                // buttons state == 0)
+                if (data[1] == 0) {
+                    xbee.send(addrHi, addrLo, &ackMsg, 1, &frameId);
+                }
+            }
+            break;
+        case CMD_ACK_MSG:
+            for (int i = 0; i < 3; i++) {
+                ackLed = 0;
+                wait_ms(100);
+                ackLed = 1;
+                wait_ms(100);
+            }
+            break;
+        }
+
+    }
+
+}
+
+static bool xbeeInit()
+{
+    xbee.registerCallback(xbeeDeviceUp, XBee::CbDeviceUp);
+    xbee.registerCallback(xbeeDeviceDown, XBee::CbDeviceDown);
+    xbee.registerCallback(xbeeNodeFound, XBee::CbNodeFound);
+    xbee.registerCallback(xbeeTxStat, XBee::CbTxStat);
+    xbee.registerCallback(xbeeDataAvailable, XBee::CbDataAvailable);
+
+#ifdef NODE_IS_COORDINATOR
+    XBee::XBeeError err = xbee.init(XBee::Coordinator, "EAEA");
+#else
+    XBee::XBeeError err = xbee.init(XBee::EndDevice, "EAEA");
+#endif
+    if (err != XBee::Ok) {
+        return false;
+    }
+
+    return true;
+
+}
+
+static void reportInitFailed() {
+    while (true) {
+        xbeeInitLed = !xbeeInitLed;
+        wait_ms(200);
+    }
+}
+
+static void ledInit() {
+    xbeeInitLed = 0;  // turn on
+    remoteBtnLed = 1; // turn off
+    ackLed = 1;       // turn off
+    led4 = 1;         // turn off
+}
+
+
+/******************************************************************************
+ * Main function
+ *****************************************************************************/
+
+int main() {
+
+    /*
+     * For this example to work at least two boards with XBee nodes must
+     * be available; one which is configured as Coordinator and another
+     * which is configured as End-Device.
+     *
+     * LED1 shows the state of XBee initialization. This LED is turned
+     * on when initialization starts and turned off when initialization
+     * is ready and the device us up. If initialization fails LED1
+     * will blink.
+     *
+     * When the Push-button on the LPC4088 QuickStart Board is pushed
+     * a message will be broadcasted. The board(s) that receives the message
+     * will show the state of the remote board's button by turning LED2
+     * on or off.
+     *
+     * The board that receives the button state message will send back
+     * an ACK message (only for button down). The board that receives
+     * the ACK message will blink with LED3. This can be used to verify
+     * that a board that is not close to you actually received a message
+     * without having to look at that board's LED2.
+     */
+
+    int buttonState = 1;
+    char data[2];
+    uint8_t frameId = 0;
+
+    // pull-up must be enabled for button
+    button.mode(PullUp);
+
+    ledInit();
+
+    pc.printf("Initializing\n");
+    if (!xbeeInit()) {
+        reportInitFailed();
+    }
+
+    // Wait until XBee node is reported to be up.
+    // - For End-device this means that the node is associated with a
+    //   coordinator
+    // - For a coordinator this means that the node is initialized and ready
+    pc.printf("Wait until up\n");
+    while(!xbeeIsUp) {
+        xbee.process();
+    }
+
+    // turn off led to indicate initialization is okay and node is up
+    xbeeInitLed = 1;
+
+    pc.printf("Node is Up\n");
+    while (1) {
+
+        if (button != buttonState) {
+            buttonState = button;
+
+            data[0] = CMD_BTN_MSG;
+            data[1] = buttonState;
+
+            // Send the button state. In this example we are broadcasting the
+            // message to all nodes on the same network (PAN ID). In reality
+            // direct messaging is preferred.
+            xbee.send(XBEE_ADDRHI_BROADCAST, XBEE_ADDRLO_BROADCAST,
+                    data, 2, &frameId);
+        }
+
+
+        xbee.process();
+
+    }
+}