Diff: conf_EPD.h

Revision:

0:9297e33f50cf

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/conf_EPD.h	Tue Jul 22 11:59:06 2014 +0000
@@ -0,0 +1,84 @@
+/**
+* \file
+*
+* \brief The EPD configurations
+*
+* Copyright (c) 2012-2014 Pervasive Displays Inc. All rights reserved.
+*
+*  Authors: Pervasive Displays Inc.
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*  1. Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*  2. Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef CONF_EPD_H_INCLUDED
+#define CONF_EPD_H_INCLUDED
+
+/** Define EPD_KIT_TOOL_FUNCTIONS if the code will work with EPD Kit Tool.
+ * \note Comment out the #define below if you won't work with EPD Kit tool and
+ *       just want to show two images change alternately by predefined image array.
+ */
+//#define EPD_KIT_TOOL_FUNCTIONS
+
+/** \brief Supported COG version
+ *
+ * \note
+ * - place the value here to assign which COG driving waveform will be used.
+ * - Options are COG_V110_G1 and COG_V230_G2 */
+//#define COG_V110_G1
+#define COG_V230_G2
+
+/** The SPI frequency of this kit (8MHz) */
+#define COG_SPI_baudrate 8000000
+
+/** Define the number of ram buffer for system packet used interchangeably*/
+#define BUFFER_SIZE	1
+
+/** System Packet length=6~64, maximum=64.
+* The payload length of MSP430 LaunchPad is 32 bytes only.
+* ========================
+* | Byte | Name          |
+* |------|---------------|
+* | 0    | Packet Header |
+* | 1    | Packet Length |
+* | 2-3  | Kit ID        |
+* | 4    | Command Type  |
+* | 5-62 | Data          |
+* | 63   | CRC           |
+*/
+#define PAYLOAD_SIZE 32
+
+/** Firmware version to display on EPD Kit Tool  */
+#define EPD_KIT_TOOL_VERSION	"1.11 "
+
+/** \brief Kit ID for recognizing by EPD Kit Tool
+ *
+ * \note
+ * - High byte is IC vendor, low byte is the name of supported development kit
+ * - Texas Instruments=01, MSP430 LaunchPad=01 */
+#define EPD_KIT_TOOL_ID			(uint16_t)0x0101
+
+#endif /* CONF_EPD_H_INCLUDED */
+
+
+