Diff: DmTftSsd2119.cpp

Revision:

7:6cd8c36cbdb3

Parent:

0:d6ff5fa503e8

--- a/DmTftSsd2119.cpp	Fri May 23 08:10:09 2014 +0000
+++ b/DmTftSsd2119.cpp	Fri Jul 04 09:26:32 2014 +0000
@@ -49,30 +49,24 @@
 }
 
 void DmTftSsd2119::sendCommand(uint8_t index) {
-  // cbi(_pinCS, _bitmaskCS);
   cbi(_pinDC, _bitmaskDC);
 
-  writeBus(0x00); // Temp
+  writeBus(0x00);
   writeBus(index);
-  // sbi(_pinCS, _bitmaskCS);
 }
 
 void DmTftSsd2119::send8BitData(uint8_t data) {
-  //cbi(_pinCS, _bitmaskCS);
   sbi(_pinDC, _bitmaskDC);
   writeBus(data);
-  //sbi(_pinCS, _bitmaskCS);
 }
 
 void DmTftSsd2119::sendData(uint16_t data) {
   uint8_t dh = data>>8;
   uint8_t dl = data&0xff;
 
-  //cbi(_pinCS, _bitmaskCS);
   sbi(_pinDC, _bitmaskDC);
   writeBus(dh);
   writeBus(dl);
-  //sbi(_pinCS, _bitmaskCS);
 }
 
 void DmTftSsd2119::setAddress(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1) {
@@ -115,8 +109,6 @@
   sbi(_pinCS, _bitmaskCS);
 }
 
-
-
 void DmTftSsd2119::init(void) {
   setTextColor(BLACK, WHITE);
 #if defined (DM_TOOLCHAIN_ARDUINO)
@@ -161,7 +153,7 @@
   sendCommand(0x11);    // Entry Mode ,SET LCM interface Mode.
   sendData(0x6870);     //  SET 65K colors,MCU interface Mode.TypeB ,ID=11 AM=0 the address counter is updated in the horizontal direction.
 
-  sendCommand(0x15);    // Generic Interface Control. DOCLK，HSYNC，VSYNC，DE
+  sendCommand(0x15);    // Generic Interface Control. DOCLK，HSYNC，VSYNC，DE
   sendData(0x0000);
 
   sendCommand(0x01);    // Driver Output Control
@@ -174,25 +166,25 @@
   sendData(0x0000);     // The valid range is from 1 to 240
      
   // LCD POWER CONTROL
-  sendCommand(0x03);    // Power Control 1, VGH，VGL
-  sendData(0x6A38);     // Set dct=fline*4, VGH=2 x VCIX2 + VCI,VGL=-(VGH) + VCix2, DC=Fline × 8, AP=Medium to large   
+  sendCommand(0x03);    // Power Control 1, VGH，VGL
+  sendData(0x6A38);     // Set dct=fline*4, VGH=2 x VCIX2 + VCI,VGL=-(VGH) + VCix2, DC=Fline × 8, AP=Medium to large   
    
   sendCommand(0X0B);    // Frame Cycle Control.
   sendData(0x5308);     // SET NO SDT=1 clock cycle (POR) ,Sets the equalizing period,    
 
-  sendCommand(0x0C);    // Power Control 2 设VCIX2 电压
+  sendCommand(0x0C);    // Power Control 2 VCIX2
   sendData(0x0003);     // Adjust VCIX2 output voltage=5.7V
 
   sendCommand(0x0D);    // Set amplitude magnification of VLCD63     
   sendData(0x000A);     // vlcd63=VREF(2.0V)* 2.335V
 
-  sendCommand(0x0E);    // SET VCOMG VDV .设VCOM电压
+  sendCommand(0x0E);    // SET VCOMG VDV .VCOM
   sendData(0x2B00);     // SET VCOMG=1,VCOM=VLCD63*  //2A 
 
   sendCommand(0X0F);    // Gate Scan Position.
   sendData(0x0000);     // The valid range is from 1 to 240.   
 
-  sendCommand(0x1E);    // SET nOTP VCOMH ,设VCOMH电压
+  sendCommand(0x1E);    // SET nOTP VCOMH ,VCOMH
   sendData(0x00B7);     // SET nOTP=0, VCOMH=VLCD63* //B8
 
   sendCommand(0x25);    // Frame Frequency Control
@@ -204,9 +196,8 @@
   sendCommand(0x27);    // Analog setting
   sendData(0x0078);
 
-  //
-  sendCommand(0x12);    // Sleep mode
-  sendData(0xD999);   
+//  sendCommand(0x12);    // Sleep mode
+//  sendData(0xD999);   
 
   // SET WINDOW
   sendCommand(0x4E);    // Ram Address Set
@@ -263,5 +254,3 @@
 /*********************************************************************************************************
   END FILE
 *********************************************************************************************************/
-
-