Rick McConney / Mbed 2 deprecated AvnetATT_shape_hackathon

This program simply connects to a HTS221 I2C device to proximity sensor

Dependencies:   FXOS8700CQ mbed

Revisions of main.cpp

Revision Date Message Actions
37:ee01f752524a 2016-09-21 v3 close and reopen socket to recover File  Diff  Annotate
36:f8d96ff1dd1b 2016-09-21 v2 File  Diff  Annotate
35:2e864bae3af0 2016-09-19 proximity sensors working File  Diff  Annotate
34:029e07b67a41 2016-07-23 Fixed the char to be * char myJsonResponse[512];; File  Diff  Annotate
26:8d6e7e7cdcae 2016-07-13 Merged in my changes with Stefan's (hopefully correctly) File  Diff  Annotate
25:e7996d22a7e6 2016-07-13 Only do 1 socket open (before was doing open -> write -> read -> close. So now do 1 open then write -> read -> write -> read ... File  Diff  Annotate
23:d6ceeb6d85ed 2016-07-13 Added text to config_me. Also moved the sensor update definition there. File  Diff  Annotate
21:d0038d14ee7c 2016-07-13 Cleaned up config_me.h a little and added some comments for the user variables. More comments need to be added. Cleaned up some of my unused debug code at the bottom of main(). File  Diff  Annotate
20:27a4f27254d0 2016-07-13 Set LED to RED for initialization, then BLUE after once the WNC is setup for internet comms, then GREEN after a response comes back from the server.; ; Then the LED is never touched and any incoming flow commands will set the color going forward. File  Diff  Annotate
19:f89baed3bd6f 2016-07-13 Right before the SOCKCONN during the WNC software initialization once in a while the WNC seems to be dropping a char that is sent to it, 'A' specifically. So I put in 2 "AT" commands right before the SOCKCONN and that seems to clean it up. File  Diff  Annotate
18:b08471eb1d1c 2016-07-13 Add a 3 sec delay between afterWNC hardware init is done and before the AT sockets commands are sent to the WNC. File  Diff  Annotate
17:38a8cc0c6ba5 2016-07-13 Updated power-up sequence per WNC. File  Diff  Annotate
16:17c5916f2d12 2016-07-13 Merged LED and JSON changes with power-up changes File  Diff  Annotate
15:61df4a452d38 2016-07-13 Added JSON parsing and displaying the LED color File  Diff  Annotate
14:0c353e212296 2016-07-13 Pulled in Steve Martin's new WNC initialization code.; Also removed the while(1) in case init fails, now it just continues to retry the initialization. File  Diff  Annotate
12:7c94ec5069dc 2016-07-12 Fixed GET string format and added 3 options for the sensors to be read. File  Diff  Annotate
11:e6602513730f 2016-07-12 Fixed I2C issues. ; a) Removed stop between HTS221 address and read; b) The latest MBED uses the slave address differently from the legacy. Stick with the old for now and fixed the HTS221 address to BF instead of 5F.; c) Made I2C definitions externs. File  Diff  Annotate
8:b08ec94d9e9f 2016-07-11 changed to serial File  Diff  Annotate
7:489835c87d95 2016-07-11 Changed device ID to serial File  Diff  Annotate
6:713b4cbf1a7d 2016-07-11 Slowed down enhanced Steve's send cmd, wait for response when sending to the wnc uart. 1mS in between every char now. File  Diff  Annotate
5:3417b6a84ee3 2016-07-11 Fixed get string to work proper with ATT test flow. File  Diff  Annotate
4:f83bedd9cab4 2016-07-11 Added a sensors file that will write the FRDM-K64F motion sensor and the values from the SiLabs PMOD into a structure. File  Diff  Annotate
3:26b3cc155f39 2016-07-10 Stefan added:; 1) Flow_parameters.h; 2) ms timer tick currently expires every 5 seconds; 3) function to parse values into sensor structure File  Diff  Annotate
2:0e2ef866af95 2016-07-10 Adding in WNC code from Fred File  Diff  Annotate
1:af7a42f7d465 2016-07-09 Adding string encode/decode; File  Diff  Annotate
0:9d5134074d84 2016-07-08 Initial version of AT&T_Avnet Shape Hackathon WNC Shield board File  Diff  Annotate