Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of mbed by
Diff: TARGET_NUCLEO_F042K6/stm32f0xx.h
- Revision:
- 109:9296ab0bfc11
diff -r 34e6b704fe68 -r 9296ab0bfc11 TARGET_NUCLEO_F042K6/stm32f0xx.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F042K6/stm32f0xx.h Thu Oct 29 08:40:18 2015 +0000 @@ -0,0 +1,244 @@ +/** + ****************************************************************************** + * @file stm32f0xx.h + * @author MCD Application Team + * @version V2.2.2 + * @date 26-June-2015 + * @brief CMSIS STM32F0xx Device Peripheral Access Layer Header File. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The STM32F0xx device used in the target application + * - To use or not the peripherals drivers in application code(i.e. + * code will be based on direct access to peripherals registers + * rather than drivers API), this option is controlled by + * "#define USE_HAL_DRIVER" + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx + * @{ + */ + +#ifndef __STM32F0xx_H +#define __STM32F0xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32F0) +#define STM32F0 +#endif /* STM32F0 */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ + +#if !defined (STM32F030x6) && !defined (STM32F030x8) && \ + !defined (STM32F031x6) && !defined (STM32F038xx) && \ + !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \ + !defined (STM32F051x8) && !defined (STM32F058xx) && \ + !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \ + !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC) + /* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */ + /* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F038xx */ /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes) */ + #define STM32F042x6 /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F048x6 */ /*!< STM32F048xx Devices (STM32F042xx microcontrollers where the Flash memory is 32 Kbytes) */ + /* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */ + /* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */ + /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ + /* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ + /* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ + /* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */ + /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */ + /* #define STM32F091xC */ /*!< STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory is 256 Kbytes) */ + /* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + #define USE_HAL_DRIVER +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V2.2.2 + */ +#define __STM32F0xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */ +#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */ +#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */ +#define __STM32F0xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F0xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\ + |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\ + |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\ + |(__CMSIS_DEVICE_HAL_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32F030x6) + #include "stm32f030x6.h" +#elif defined(STM32F030x8) + #include "stm32f030x8.h" +#elif defined(STM32F031x6) + #include "stm32f031x6.h" +#elif defined(STM32F038xx) + #include "stm32f038xx.h" +#elif defined(STM32F042x6) + #include "stm32f042x6.h" +#elif defined(STM32F048xx) + #include "stm32f048xx.h" +#elif defined(STM32F051x8) + #include "stm32f051x8.h" +#elif defined(STM32F058xx) + #include "stm32f058xx.h" +#elif defined(STM32F070x6) + #include "stm32f070x6.h" +#elif defined(STM32F070xB) + #include "stm32f070xb.h" +#elif defined(STM32F071xB) + #include "stm32f071xb.h" +#elif defined(STM32F072xB) + #include "stm32f072xb.h" +#elif defined(STM32F078xx) + #include "stm32f078xx.h" +#elif defined(STM32F091xC) + #include "stm32f091xc.h" +#elif defined(STM32F098xx) + #include "stm32f098xx.h" +#elif defined(STM32F030xC) + #include "stm32f030xc.h" +#else + #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + ERROR = 0, + SUCCESS = !ERROR +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32f0xx_hal.h" +#endif /* USE_HAL_DRIVER */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32F0xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/