Elijah Orr
Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_usart.h
- Revision:
- 92:4fc01daae5a5
- Parent:
- 85:024bf7f99721
- Child:
- 93:e188a91d3eaa
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_usart.h Wed Oct 29 11:02:04 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_usart.h Thu Nov 27 13:33:22 2014 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_usart.h
* @author MCD Application Team
- * @version V1.0.0
- * @date 28-May-2014
+ * @version V1.1.0
+ * @date 03-Oct-2014
* @brief Header file of USART HAL module.
******************************************************************************
* @attention
@@ -55,6 +55,10 @@
*/
/* Exported types ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Types USART Exported Types
+ * @{
+ */
+
/**
* @brief USART Init Structure definition
@@ -68,26 +72,26 @@
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref USARTEx_Word_Length */
- uint16_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
This parameter can be a value of @ref USART_Stop_Bits */
- uint16_t Parity; /*!< Specifies the parity mode.
+ uint32_t Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref USART_Parity
@note When parity is enabled, the computed parity is inserted
at the MSB position of the transmitted data (9th bit when
the word length is set to 9 data bits; 8th bit when the
word length is set to 8 data bits). */
- uint16_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
This parameter can be a value of @ref USART_Mode */
- uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
This parameter can be a value of @ref USART_Clock_Polarity */
- uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
This parameter can be a value of @ref USART_Clock_Phase */
- uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
This parameter can be a value of @ref USART_Last_Bit */
}USART_InitTypeDef;
@@ -137,50 +141,52 @@
*/
typedef struct
{
- USART_TypeDef *Instance; /* USART registers base address */
+ USART_TypeDef *Instance; /*!< USART registers base address */
- USART_InitTypeDef Init; /* USART communication parameters */
+ USART_InitTypeDef Init; /*!< USART communication parameters */
- uint8_t *pTxBuffPtr; /* Pointer to USART Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */
- uint16_t TxXferSize; /* USART Tx Transfer size */
+ uint16_t TxXferSize; /*!< USART Tx Transfer size */
- uint16_t TxXferCount; /* USART Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< USART Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to USART Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */
- uint16_t RxXferSize; /* USART Rx Transfer size */
+ uint16_t RxXferSize; /*!< USART Rx Transfer size */
- uint16_t RxXferCount; /* USART Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< USART Rx Transfer Counter */
- uint16_t Mask; /* USART Rx RDR register mask */
+ uint16_t Mask; /*!< USART Rx RDR register mask */
- DMA_HandleTypeDef *hdmatx; /* USART Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* USART Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_USART_StateTypeDef State; /* USART communication state */
+ HAL_USART_StateTypeDef State; /*!< USART communication state */
- HAL_USART_ErrorTypeDef ErrorCode; /* USART Error code */
+ HAL_USART_ErrorTypeDef ErrorCode; /*!< USART Error code */
}USART_HandleTypeDef;
+/**
+ * @}
+ */
/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup USART_Exported_Constants
+/** @defgroup USART_Exported_Constants USART Exported constants
* @{
*/
/** @defgroup USART_Stop_Bits USART Number of Stop Bits
* @{
*/
-#define USART_STOPBITS_1 ((uint16_t)0x0000)
-#define USART_STOPBITS_0_5 ((uint16_t)USART_CR2_STOP_0)
-#define USART_STOPBITS_2 ((uint16_t)USART_CR2_STOP_1)
-#define USART_STOPBITS_1_5 ((uint16_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+#define USART_STOPBITS_1 ((uint32_t)0x0000)
+#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
((STOPBITS) == USART_STOPBITS_0_5) || \
((STOPBITS) == USART_STOPBITS_1_5) || \
@@ -192,9 +198,9 @@
/** @defgroup USART_Parity USART Parity
* @{
*/
-#define USART_PARITY_NONE ((uint16_t)0x0000)
-#define USART_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
-#define USART_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
+#define USART_PARITY_NONE ((uint32_t)0x0000)
+#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
((PARITY) == USART_PARITY_EVEN) || \
((PARITY) == USART_PARITY_ODD))
@@ -205,10 +211,10 @@
/** @defgroup USART_Mode USART Mode
* @{
*/
-#define USART_MODE_RX ((uint16_t)USART_CR1_RE)
-#define USART_MODE_TX ((uint16_t)USART_CR1_TE)
-#define USART_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
-#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
/**
* @}
*/
@@ -216,8 +222,8 @@
/** @defgroup USART_Clock USART Clock
* @{
*/
-#define USART_CLOCK_DISABLED ((uint16_t)0x0000)
-#define USART_CLOCK_ENABLED ((uint16_t)USART_CR2_CLKEN)
+#define USART_CLOCK_DISABLED ((uint32_t)0x0000)
+#define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN)
#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \
((CLOCK) == USART_CLOCK_ENABLED))
/**
@@ -227,8 +233,8 @@
/** @defgroup USART_Clock_Polarity USART Clock Polarity
* @{
*/
-#define USART_POLARITY_LOW ((uint16_t)0x0000)
-#define USART_POLARITY_HIGH ((uint16_t)USART_CR2_CPOL)
+#define USART_POLARITY_LOW ((uint32_t)0x0000)
+#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
/**
* @}
@@ -237,8 +243,8 @@
/** @defgroup USART_Clock_Phase USART Clock Phase
* @{
*/
-#define USART_PHASE_1EDGE ((uint16_t)0x0000)
-#define USART_PHASE_2EDGE ((uint16_t)USART_CR2_CPHA)
+#define USART_PHASE_1EDGE ((uint32_t)0x0000)
+#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
/**
* @}
@@ -247,8 +253,8 @@
/** @defgroup USART_Last_Bit USART Last Bit
* @{
*/
-#define USART_LASTBIT_DISABLE ((uint16_t)0x0000)
-#define USART_LASTBIT_ENABLE ((uint16_t)USART_CR2_LBCL)
+#define USART_LASTBIT_DISABLE ((uint32_t)0x0000)
+#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
((LASTBIT) == USART_LASTBIT_ENABLE))
/**
@@ -321,8 +327,8 @@
/** @defgroup USART_Request_Parameters USART Request Parameters
* @{
*/
-#define USART_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
-#define USART_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define USART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define USART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
#define IS_USART_REQUEST_PARAMETER(PARAM) (((PARAM) == USART_RXDATA_FLUSH_REQUEST) || \
((PARAM) == USART_TXDATA_FLUSH_REQUEST))
/**
@@ -340,14 +346,13 @@
/**
* @}
*/
-
-
-/* Exported macros ------------------------------------------------------------*/
-
-/** @defgroup USART_Exported_Macros
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Macros USART Exported Macros
* @{
*/
+
/** @brief Reset USART handle state
* @param __HANDLE__: USART handle.
* @retval None
@@ -355,8 +360,7 @@
#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
/** @brief Checks whether the specified USART flag is set or not.
- * @param __HANDLE__: specifies the USART Handle.
- * This parameter can be UARTx where x: 1, 2, 3 to select the USART peripheral.
+ * @param __HANDLE__: specifies the USART Handle
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg USART_FLAG_REACK: Receive enable ackowledge flag
@@ -377,8 +381,7 @@
/** @brief Enables the specified USART interrupt.
- * @param __HANDLE__: specifies the USART Handle.
- * This parameter can be UARTx where x: 1, 2, 3 to select the USART peripheral.
+ * @param __HANDLE__: specifies the USART Handle
* @param __INTERRUPT__: specifies the USART interrupt source to enable.
* This parameter can be one of the following values:
* @arg USART_IT_TXE: Transmit Data Register empty interrupt
@@ -395,7 +398,6 @@
/** @brief Disables the specified USART interrupt.
* @param __HANDLE__: specifies the USART Handle.
- * This parameter can be UARTx where x: 1, 2, 3 to select the USART peripheral.
* @param __INTERRUPT__: specifies the USART interrupt source to disable.
* This parameter can be one of the following values:
* @arg USART_IT_TXE: Transmit Data Register empty interrupt
@@ -412,8 +414,7 @@
/** @brief Checks whether the specified USART interrupt has occurred or not.
- * @param __HANDLE__: specifies the USART Handle.
- * This parameter can be USARTx where x: 1, 2 or 3
+ * @param __HANDLE__: specifies the USART Handle
* @param __IT__: specifies the USART interrupt source to check.
* This parameter can be one of the following values:
* @arg USART_IT_TXE: Transmit Data Register empty interrupt
@@ -430,7 +431,6 @@
/** @brief Checks whether the specified USART interrupt source is enabled.
* @param __HANDLE__: specifies the USART Handle.
- * This parameter can be USARTx where x: 1, 2 or 3
* @param __IT__: specifies the USART interrupt source to check.
* This parameter can be one of the following values:
* @arg USART_IT_TXE: Transmit Data Register empty interrupt
@@ -450,7 +450,6 @@
/** @brief Clears the specified USART ISR flag, in setting the proper ICR register flag.
* @param __HANDLE__: specifies the USART Handle.
- * This parameter can be USARTx where x: 1, 2 or 3
* @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
* to clear the corresponding interrupt
* This parameter can be one of the following values:
@@ -463,11 +462,10 @@
* @arg USART_CLEAR_CTSF: CTS Interrupt Clear Flag
* @retval None
*/
-#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__))
+#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
/** @brief Set a specific USART request flag.
* @param __HANDLE__: specifies the USART Handle.
- * This parameter can be USARTx where x: 1, 2 or 3
* @param __REQ__: specifies the request flag to set
* This parameter can be one of the following values:
* @arg USART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
@@ -479,18 +477,24 @@
/** @brief Enable USART
* @param __HANDLE__: specifies the USART Handle.
- * The Handle Instance can be USARTx where x: 1, 2, 3 to select the USART peripheral
* @retval None
*/
-#define __USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
/** @brief Disable USART
* @param __HANDLE__: specifies the USART Handle.
- * The Handle Instance can be USARTx where x: 1, 2, 3 to select the USART peripheral
* @retval None
*/
-#define __USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
-
+#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup USART_Private_Macros USART Private Macros
+ * @{
+ */
/** @brief Check USART Baud rate
* @param BAUDRATE: Baudrate specified by the user
@@ -499,7 +503,6 @@
* @retval Test result (TRUE or FALSE)
*/
#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
-
/**
* @}
*/
@@ -509,14 +512,31 @@
/* Exported functions --------------------------------------------------------*/
-/* Initialization and de-initialization functions ****************************/
+/** @addtogroup USART_Exported_Functions USART Exported Functions
+ * @{
+ */
+
+/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ******************************/
HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
void HAL_USART_MspInit(USART_HandleTypeDef *husart);
void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
void HAL_USART_SetConfig(USART_HandleTypeDef *husart);
HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart);
-/* IO operation functions *****************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup USART_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *******************************************************/
HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
@@ -537,8 +557,16 @@
void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
/* Peripheral Control functions ***********************************************/
+/** @addtogroup USART_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
/* Peripheral State and Error functions ***************************************/
HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
@@ -551,6 +579,14 @@
* @}
*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
#ifdef __cplusplus
}
#endif
@@ -558,3 +594,4 @@
#endif /* __STM32F0xx_HAL_USART_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+