Theo Ekelmans
14 Key poller with debouncing DEMO
Diff: main.cpp
- Revision:
- 0:acabda48796c
- Child:
- 1:6ee2362ce0fd
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sat Jan 07 00:17:15 2012 +0000
@@ -0,0 +1,322 @@
+/* -----------------------------------------------------------------------
+ 14 Key poller and debounce demo by Theo Ekelmans, Version 1.0
+ -----------------------------------------------------------------------
+
+ In this demo, banks A, C and D are push buttons, bank B are toggle switches that have a LED inside
+
+ The timer used for SampleInterval is set to 10 ms (sample time)
+
+ 2 * SampleInterval = 20ms for good quality switches, 80ms for high CPU load or really crappy switches :)
+
+ led3 on the MBED
+
+ Config your USB COM port terminal session as a VT100 terminal :)
+
+ Notes:
+ 1: The SampleCnt is 32 bit, that means every 2^32 times 10ms SampleInterval it will trigger an overflow
+ on the long vars, thats why @ 4000000000 the TimerOverflowRecover resets all counters.
+ During in that brief moment (2 miliseconds every 25 days or so), the debounce is not reliable ;)
+
+ 2: The USB COM port / VT100 terminal session hangs somtimes when you are bashing buttons like a madman,
+ the LCD however is rock solid.
+
+ */
+
+#include "mbed.h"
+#include "DigitalIn.h"
+
+//--- Defines
+#define ON 1
+#define OFF 0
+
+//ASCII commands for the VT100 terminal
+#define LF 10
+#define CLS 12
+#define CR 13
+#define BS 8
+#define ESC 27
+
+//Serial LCD - Matrix Orbital LK204 command codes
+#define CMD 254
+#define CurPos 71 //follow up by COL ROW
+
+Serial lcd(p9, p10); // tx, rx
+
+//Debounce vars
+int DebounceThreshold = 3; // 2 * SampleInterval = 20ms for good quality switches, 80ms for high CPU load or really crappy switches :)
+float SampleInterval = 0.01; // The timer for debouncing interval: 10 ms sample time
+
+unsigned long PollCount1 = 0;
+unsigned long PollCount2 = 0;
+unsigned long KillBeepAt = 0;
+char strCmd [100] = "";
+
+//Debounce vars
+unsigned long SampleCnt = 0;
+unsigned long DebounceActivationCounter = 0;
+unsigned long LastSampleA1 = 0;
+unsigned long LastSampleA2 = 0;
+unsigned long LastSampleA3 = 0;
+unsigned long LastSampleA4 = 0;
+unsigned long LastSampleB1 = 0;
+unsigned long LastSampleB2 = 0;
+unsigned long LastSampleB3 = 0;
+unsigned long LastSampleB4 = 0;
+unsigned long LastSampleC1 = 0;
+unsigned long LastSampleC2 = 0;
+unsigned long LastSampleC3 = 0;
+unsigned long LastSampleC4 = 0;
+unsigned long LastSampleD1 = 0;
+unsigned long LastSampleD2 = 0;
+
+bool LastButtonA1 = false;
+bool LastButtonA2 = false;
+bool LastButtonA3 = false;
+bool LastButtonA4 = false;
+bool LastButtonB1 = false;
+bool LastButtonB2 = false;
+bool LastButtonB3 = false;
+bool LastButtonB4 = false;
+bool LastButtonC1 = false;
+bool LastButtonC2 = false;
+bool LastButtonC3 = false;
+bool LastButtonC4 = false;
+bool LastButtonD1 = false;
+bool LastButtonD2 = false;
+
+// The switch mapping
+DigitalIn buttonA1(p11);
+DigitalIn buttonA2(p12);
+DigitalIn buttonA3(p13);
+DigitalIn buttonA4(p14);
+DigitalIn buttonB1(p15);
+DigitalIn buttonB2(p16);
+DigitalIn buttonB3(p17);
+DigitalIn buttonB4(p18);
+DigitalIn buttonC1(p21);
+DigitalIn buttonC2(p22);
+DigitalIn buttonC3(p23);
+DigitalIn buttonC4(p24);
+DigitalIn buttonD1(p28);
+DigitalIn buttonD2(p27);
+
+//Bank B Leds
+DigitalOut ledH1(p5);
+DigitalOut ledH2(p6);
+DigitalOut ledH3(p7);
+DigitalOut ledH4(p8);
+
+//MBED leds
+DigitalOut led1(LED1);
+DigitalOut led2(LED2);
+DigitalOut led3(LED3);
+DigitalOut led4(LED4);
+
+//Timer that starts the polling event
+Ticker DebounceTimer;
+
+//Beeper port
+DigitalOut Beep(p29);
+
+// Config your USB COM port terminal session as a VT100 terminal :)
+Serial usbUART ( USBTX, USBRX );
+
+// Kill tha beep....
+void KillBeep() {Beep = OFF; } // beepTimer.detach();}
+
+
+//-------------------------------------------------------------------------------------------------------
+//This is where you put your payload;
+//-------------------------------------------------------------------------------------------------------
+void PayLoadPressed(char msg[] ) { lcd.printf("%c%c%c%cA%i%i%i%iB%i%i%i%iC%i%i%i%iD%i%i\r\n@ %ld, %ld bounces\r\nKey + %s @ %ld\r\n ", CMD, CurPos, 1, 1,buttonA1.read(),buttonA2.read(),buttonA3.read(),buttonA4.read(),buttonB1.read(),buttonB2.read(),buttonB3.read(),buttonB4.read(),buttonC1.read(),buttonC2.read(),buttonC3.read(),buttonC4.read(),buttonD1.read(),buttonD2.read(), PollCount2, DebounceActivationCounter, msg, SampleCnt);};
+void PayLoadRelease(char msg[] ) { lcd.printf("%c%c%c%cA%i%i%i%iB%i%i%i%iC%i%i%i%iD%i%i\r\n@ %ld, %ld bounces\r\nKey - %s @ %ld\r\n ", CMD, CurPos, 1, 1,buttonA1.read(),buttonA2.read(),buttonA3.read(),buttonA4.read(),buttonB1.read(),buttonB2.read(),buttonB3.read(),buttonB4.read(),buttonC1.read(),buttonC2.read(),buttonC3.read(),buttonC4.read(),buttonD1.read(),buttonD2.read(), PollCount2, DebounceActivationCounter, msg, SampleCnt);};
+
+//-------------------------------------------------------------------------------------------------------
+//This routine is only needed for the demo and can be removed for runtime
+//-------------------------------------------------------------------------------------------------------
+void DeboucnceActive(char msg[], unsigned long l, unsigned long c) {
+ lcd.printf("%c%c%c%cA%i%i%i%iB%i%i%i%iC%i%i%i%iD%i%i\r\n@ %ld, %ld bounces\r\nKey - %s @ %ld\r\n%s bounced %ld x ", CMD, CurPos, 1, 1, buttonA1.read(),buttonA2.read(),buttonA3.read(),buttonA4.read(),buttonB1.read(),buttonB2.read(),buttonB3.read(),buttonB4.read(),buttonC1.read(),buttonC2.read(),buttonC3.read(),buttonC4.read(),buttonD1.read(),buttonD2.read(), PollCount2, DebounceActivationCounter, msg, SampleCnt, msg, (c - l));
+ DebounceActivationCounter ++;
+ led3 = !led3; //Blink on debounce
+ Beep = ON;
+ KillBeepAt = SampleCnt + 50; //Kill Beep in 500 Ms
+ };
+
+//----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+// Wait at least <DebounceThreshold> samples Toggle status Payload Save debounce counter Debounce active
+//----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+void keyPressedA1 ( void ) {if ((LastSampleA1 + DebounceThreshold) < SampleCnt) {LastButtonA1 = buttonA1; PayLoadPressed("F"); LastSampleA1 = SampleCnt;} else {DeboucnceActive("F", LastSampleA1, SampleCnt);};};
+void keyReleasedA1( void ) {if ((LastSampleA1 + DebounceThreshold) < SampleCnt) {LastButtonA1 = buttonA1; /*no key up event*/ LastSampleA1 = SampleCnt;} else {/*no key up debounce needed either*/ ;};};
+void keyPressedA2 ( void ) {if ((LastSampleA2 + DebounceThreshold) < SampleCnt) {LastButtonA2 = buttonA2; PayLoadPressed("G"); LastSampleA2 = SampleCnt;} else {DeboucnceActive("G", LastSampleA2, SampleCnt);};};
+void keyReleasedA2( void ) {if ((LastSampleA2 + DebounceThreshold) < SampleCnt) {LastButtonA2 = buttonA2; LastSampleA2 = SampleCnt;} else { ;};};
+void keyPressedA3 ( void ) {if ((LastSampleA3 + DebounceThreshold) < SampleCnt) {LastButtonA3 = buttonA3; PayLoadPressed("H"); LastSampleA3 = SampleCnt;} else {DeboucnceActive("H", LastSampleA3, SampleCnt);};};
+void keyReleasedA3( void ) {if ((LastSampleA3 + DebounceThreshold) < SampleCnt) {LastButtonA3 = buttonA3; LastSampleA3 = SampleCnt;} else { ;};};
+void keyPressedA4 ( void ) {if ((LastSampleA4 + DebounceThreshold) < SampleCnt) {LastButtonA4 = buttonA4; PayLoadPressed("I"); LastSampleA4 = SampleCnt;} else {DeboucnceActive("I", LastSampleA4, SampleCnt);};};
+void keyReleasedA4( void ) {if ((LastSampleA4 + DebounceThreshold) < SampleCnt) {LastButtonA4 = buttonA4; LastSampleA4 = SampleCnt;} else { ;};};
+
+//Toggle switches need a payload on the pressed and release event, and debouncing on both
+void keyPressedB1 ( void ) {if ((LastSampleB1 + DebounceThreshold) < SampleCnt) {LastButtonB1 = buttonB1; PayLoadPressed("A"); LastSampleB1 = SampleCnt;} else {DeboucnceActive("A", LastSampleB1, SampleCnt);};};
+void keyReleasedB1( void ) {if ((LastSampleB1 + DebounceThreshold) < SampleCnt) {LastButtonB1 = buttonB1; PayLoadRelease("a"); LastSampleB1 = SampleCnt;} else {DeboucnceActive("a", LastSampleB1, SampleCnt);};};
+void keyPressedB2 ( void ) {if ((LastSampleB2 + DebounceThreshold) < SampleCnt) {LastButtonB2 = buttonB2; PayLoadPressed("B"); LastSampleB2 = SampleCnt;} else {DeboucnceActive("B", LastSampleB2, SampleCnt);};};
+void keyReleasedB2( void ) {if ((LastSampleB2 + DebounceThreshold) < SampleCnt) {LastButtonB2 = buttonB2; PayLoadRelease("b"); LastSampleB2 = SampleCnt;} else {DeboucnceActive("b", LastSampleB2, SampleCnt);};};
+void keyPressedB3 ( void ) {if ((LastSampleB3 + DebounceThreshold) < SampleCnt) {LastButtonB3 = buttonB3; PayLoadPressed("C"); LastSampleB3 = SampleCnt;} else {DeboucnceActive("C", LastSampleB3, SampleCnt);};};
+void keyReleasedB3( void ) {if ((LastSampleB3 + DebounceThreshold) < SampleCnt) {LastButtonB3 = buttonB3; PayLoadRelease("c"); LastSampleB3 = SampleCnt;} else {DeboucnceActive("c", LastSampleB3, SampleCnt);};};
+void keyPressedB4 ( void ) {if ((LastSampleB4 + DebounceThreshold) < SampleCnt) {LastButtonB4 = buttonB4; PayLoadPressed("D"); LastSampleB4 = SampleCnt;} else {DeboucnceActive("D", LastSampleB4, SampleCnt);};};
+void keyReleasedB4( void ) {if ((LastSampleB4 + DebounceThreshold) < SampleCnt) {LastButtonB4 = buttonB4; PayLoadRelease("d"); LastSampleB4 = SampleCnt;} else {DeboucnceActive("d", LastSampleB4, SampleCnt);};};
+
+//Push button switches only need a payload and debouncing on the pressed event, and you can ignore the release event (C4 left on for demo purposes)
+void keyPressedC1 ( void ) {if ((LastSampleC1 + DebounceThreshold) < SampleCnt) {LastButtonC1 = buttonC1; PayLoadPressed("L"); LastSampleC1 = SampleCnt;} else {DeboucnceActive("L", LastSampleC1, SampleCnt);};};
+void keyReleasedC1( void ) {if ((LastSampleC1 + DebounceThreshold) < SampleCnt) {LastButtonC1 = buttonC1; /*no key up event*/ LastSampleC1 = SampleCnt;} else {/*no key up debounce needed either*/ ;};};
+void keyPressedC2 ( void ) {if ((LastSampleC2 + DebounceThreshold) < SampleCnt) {LastButtonC2 = buttonC2; PayLoadPressed("M"); LastSampleC2 = SampleCnt;} else {DeboucnceActive("M", LastSampleC2, SampleCnt);};};
+void keyReleasedC2( void ) {if ((LastSampleC2 + DebounceThreshold) < SampleCnt) {LastButtonC2 = buttonC2; LastSampleC2 = SampleCnt;} else { ;};};
+void keyPressedC3 ( void ) {if ((LastSampleC3 + DebounceThreshold) < SampleCnt) {LastButtonC3 = buttonC3; PayLoadPressed("N"); LastSampleC3 = SampleCnt;} else {DeboucnceActive("N", LastSampleC3, SampleCnt);};};
+void keyReleasedC3( void ) {if ((LastSampleC3 + DebounceThreshold) < SampleCnt) {LastButtonC3 = buttonC3; LastSampleC3 = SampleCnt;} else { ;};};
+void keyPressedC4 ( void ) {if ((LastSampleC4 + DebounceThreshold) < SampleCnt) {LastButtonC4 = buttonC4; PayLoadPressed("O"); LastSampleC4 = SampleCnt;} else {DeboucnceActive("O", LastSampleC4, SampleCnt);};};
+void keyReleasedC4( void ) {if ((LastSampleC4 + DebounceThreshold) < SampleCnt) {LastButtonC4 = buttonC4; PayLoadRelease("o"); LastSampleC4 = SampleCnt;} else {DeboucnceActive("o", LastSampleC4, SampleCnt);};};
+
+//Push button switches only need a payload and debouncing on the pressed event, and you can ignore the release event (C4 left on for demo purposes)
+void keyPressedD1 ( void ) {if ((LastSampleD1 + DebounceThreshold) < SampleCnt) {LastButtonD1 = buttonD1; PayLoadPressed("Q"); LastSampleD1 = SampleCnt;} else {DeboucnceActive("Q", LastSampleD1, SampleCnt);};};
+void keyReleasedD1( void ) {if ((LastSampleD1 + DebounceThreshold) < SampleCnt) {LastButtonD1 = buttonD1; /*no key up event*/ LastSampleD1 = SampleCnt;} else {/*no key up debounce needed either*/ ;};};
+void keyPressedD2 ( void ) {if ((LastSampleD2 + DebounceThreshold) < SampleCnt) {LastButtonD2 = buttonD2; PayLoadPressed("P"); LastSampleD2 = SampleCnt;} else {DeboucnceActive("P", LastSampleD2, SampleCnt);};};
+void keyReleasedD2( void ) {if ((LastSampleD2 + DebounceThreshold) < SampleCnt) {LastButtonD2 = buttonD2; PayLoadRelease("p"); LastSampleD2 = SampleCnt;} else {DeboucnceActive("P", LastSampleD2, SampleCnt);};};
+//----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+
+
+//-------------------------------------------------------------------------------------------------------
+//INIT of the buttons, since toggle switches can be ON at startup
+//-------------------------------------------------------------------------------------------------------
+void InitButtons(void) {
+
+ if (buttonA1){LastButtonA1 = true;} else {LastButtonA1 = false;};
+ if (buttonA2){LastButtonA2 = true;} else {LastButtonA2 = false;};
+ if (buttonA3){LastButtonA3 = true;} else {LastButtonA3 = false;};
+ if (buttonA4){LastButtonA4 = true;} else {LastButtonA4 = false;};
+ if (buttonB1){LastButtonB1 = true;} else {LastButtonB1 = false;};
+ if (buttonB2){LastButtonB2 = true;} else {LastButtonB2 = false;};
+ if (buttonB3){LastButtonB3 = true;} else {LastButtonB3 = false;};
+ if (buttonB4){LastButtonB4 = true;} else {LastButtonB4 = false;};
+ if (buttonC1){LastButtonC1 = true;} else {LastButtonC1 = false;};
+ if (buttonC2){LastButtonC2 = true;} else {LastButtonC2 = false;};
+ if (buttonC3){LastButtonC3 = true;} else {LastButtonC3 = false;};
+ if (buttonC4){LastButtonC4 = true;} else {LastButtonC4 = false;};
+ if (buttonD1){LastButtonD1 = true;} else {LastButtonD1 = false;};
+ if (buttonD2){LastButtonD2 = true;} else {LastButtonD2 = false;};
+
+ // Update bank B Leds (Toggle switches)
+ ledH1 = buttonB1.read();
+ ledH2 = buttonB2.read();
+ ledH3 = buttonB3.read();
+ ledH4 = buttonB4.read();
+
+}
+
+void TimerOverflowRecover (void) {
+
+ //Reset all counters
+ PollCount2 = 0;
+ PollCount1 = 0;
+ SampleCnt = 0;
+ LastSampleA1 = 0;
+ LastSampleA2 = 0;
+ LastSampleA3 = 0;
+ LastSampleA4 = 0;
+ LastSampleB1 = 0;
+ LastSampleB2 = 0;
+ LastSampleB3 = 0;
+ LastSampleB4 = 0;
+ LastSampleC1 = 0;
+ LastSampleC2 = 0;
+ LastSampleC3 = 0;
+ LastSampleC4 = 0;
+ LastSampleD1 = 0;
+ LastSampleD2 = 0;
+
+}
+
+//-------------------------------------------------------------------------------------------------------
+//The key detection routine
+//-------------------------------------------------------------------------------------------------------
+void DebounceTick() {
+
+ // XOR only traps 01 and 10 0->1 = pressed 1->0 = released
+ if (buttonA1 ^ LastButtonA1) {if (buttonA1){keyPressedA1();} else {keyReleasedA1();};};
+ if (buttonA2 ^ LastButtonA2) {if (buttonA2){keyPressedA2();} else {keyReleasedA2();};};
+ if (buttonA3 ^ LastButtonA3) {if (buttonA3){keyPressedA3();} else {keyReleasedA3();};};
+ if (buttonA4 ^ LastButtonA4) {if (buttonA4){keyPressedA4();} else {keyReleasedA4();};};
+ if (buttonB1 ^ LastButtonB1) {if (buttonB1){keyPressedB1();} else {keyReleasedB1();};};
+ if (buttonB2 ^ LastButtonB2) {if (buttonB2){keyPressedB2();} else {keyReleasedB2();};};
+ if (buttonB3 ^ LastButtonB3) {if (buttonB3){keyPressedB3();} else {keyReleasedB3();};};
+ if (buttonB4 ^ LastButtonB4) {if (buttonB4){keyPressedB4();} else {keyReleasedB4();};};
+ if (buttonC1 ^ LastButtonC1) {if (buttonC1){keyPressedC1();} else {keyReleasedC1();};};
+ if (buttonC2 ^ LastButtonC2) {if (buttonC2){keyPressedC2();} else {keyReleasedC2();};};
+ if (buttonC3 ^ LastButtonC3) {if (buttonC3){keyPressedC3();} else {keyReleasedC3();};};
+ if (buttonC4 ^ LastButtonC4) {if (buttonC4){keyPressedC4();} else {keyReleasedC4();};};
+ if (buttonD1 ^ LastButtonD1) {if (buttonD1){keyPressedD1();} else {keyReleasedD1();};};
+ if (buttonD2 ^ LastButtonD2) {if (buttonD2){keyPressedD2();} else {keyReleasedD2();};};
+
+ // Update bank B Leds (Toggle switches)
+ ledH1 = buttonB1.read();
+ ledH2 = buttonB2.read();
+ ledH3 = buttonB3.read();
+ ledH4 = buttonB4.read();
+
+ SampleCnt ++;
+
+ //Kill Beep
+ if (SampleCnt > KillBeepAt) {Beep = OFF;}
+
+ //Overflow protection
+ if (SampleCnt >= 4000000000) {TimerOverflowRecover();};
+}
+
+
+
+//-------------------------------------------------------------------------------------------------------
+// Main loop
+//-------------------------------------------------------------------------------------------------------
+int main() {
+
+ //Init Serial LCD
+ lcd.baud(115200);
+ lcd.printf("%c", CLS);
+
+ //Init USB COM port for VT100
+ usbUART.baud(115200);
+
+ //VT100 clear screen (ESC[2J) , move cursor (ESC[1;1H) to Row 1, Col 1
+ usbUART.printf("%c[2J%c[1;1H", ESC , ESC );
+
+ InitButtons();
+
+ // The timer for debouncing interval: 10 ms sample time
+ DebounceTimer.attach(&DebounceTick, SampleInterval);
+
+ //Sound a beep for 500 Ms
+ Beep = ON;
+ KillBeepAt = SampleCnt + 50;
+
+
+ PollCount1 = 0;
+ while (1) {
+
+ PollCount1 ++;
+
+ //Update terminal every 500000'th pass
+ if ( PollCount1 % 500000 == 0 ) {
+
+ PollCount1 = 0;
+ PollCount2 ++;
+
+ //Send to VT100 terminal emulator on the PC USB COM port
+ //And because i think scrolling screens are annoying, i added cursor control codes below
+ //VT100 move cursor (ESC[1;1H) to Row 1, Col 1
+ usbUART.printf("%c[1;1H", ESC );
+ usbUART.printf("A%i%i%i%i ",buttonA1.read(),buttonA2.read(),buttonA3.read(),buttonA4.read());
+ usbUART.printf("B%i%i%i%i ",buttonB1.read(),buttonB2.read(),buttonB3.read(),buttonB4.read());
+ usbUART.printf("C%i%i%i%i ",buttonC1.read(),buttonC2.read(),buttonC3.read(),buttonC4.read());
+ usbUART.printf("D%i%i @ %ld, %ld bounces",buttonD1.read(),buttonD2.read(), PollCount2, DebounceActivationCounter);
+
+ }
+
+ }
+}