Eliott Fersko
libmDot0mbed5
Fork of
libmDot-mbed5
by 
MultiTech
Diff: mDot.h
- Revision:
- 10:27dafba9fe19
- Parent:
- 9:ec2fffe31793
- Child:
- 11:d8464345e1f1
diff -r ec2fffe31793 -r 27dafba9fe19 mDot.h
--- a/mDot.h Tue Nov 10 14:44:36 2015 -0600
+++ b/mDot.h Wed Dec 02 15:19:12 2015 -0600
@@ -76,7 +76,9 @@
PinName _wakeup_pin;
typedef enum {
- OFF, ON, BLINK,
+ OFF,
+ ON,
+ BLINK,
} state;
public:
@@ -105,39 +107,71 @@
} mdot_ret_code;
enum JoinMode {
- MANUAL, OTA, AUTO_OTA
+ MANUAL,
+ OTA,
+ AUTO_OTA
};
enum Mode {
- COMMAND_MODE, SERIAL_MODE
+ COMMAND_MODE,
+ SERIAL_MODE
};
enum RX_Output {
- HEXADECIMAL, BINARY
+ HEXADECIMAL,
+ BINARY
};
enum DataRates {
- SF_12, SF_11, SF_10, SF_9, SF_8, SF_7, SF_7H, SF_50
+ SF_12,
+ SF_11,
+ SF_10,
+ SF_9,
+ SF_8,
+ SF_7,
+ SF_7H,
+ SF_50
};
enum FrequencyBands {
- FB_868, FB_915
+ FB_868,
+ FB_915
};
enum FrequencySubBands {
- FSB_ALL, FSB_1, FSB_2, FSB_3, FSB_4, FSB_5, FSB_6, FSB_7, FSB_8
+ FSB_ALL,
+ FSB_1,
+ FSB_2,
+ FSB_3,
+ FSB_4,
+ FSB_5,
+ FSB_6,
+ FSB_7,
+ FSB_8
};
enum JoinByteOrder {
- LSB, MSB
+ LSB,
+ MSB
};
enum wakeup_mode {
- RTC_ALARM, INTERRUPT
+ RTC_ALARM,
+ INTERRUPT,
+ RTC_ALARM_OR_INTERRUPT
};
enum UserBackupRegs {
- UBR0, UBR1, UBR2, UBR3, UBR4, UBR5, UBR6, UBR7, UBR8, UBR9
+ UBR0,
+ UBR1,
+ UBR2,
+ UBR3,
+ UBR4,
+ UBR5,
+ UBR6,
+ UBR7,
+ UBR8,
+ UBR9
};
typedef struct {
@@ -274,7 +308,7 @@
/** Set frequency sub band
* only applicable if frequency band is set for United States (FB_915)
- * sub band 0 will allow the radio to use all 64 channels
+ * sub band 0 will allow the radio to use all 64 channels
* sub band 1 - 8 will allow the radio to use the 8 channels in that sub band
* for use with Conduit gateway and MTAC_LORA, use sub bands 1 - 8, not sub band 0
* @param band the sub band to use (0 - 8)
@@ -288,6 +322,8 @@
uint8_t getFrequencySubBand();
/** Enable/disable public network mode
+ * JoinDelay will be set to (public: 5s, private: 1s) and
+ * RxDelay will be set to 1s both can be adjusted afterwards
* @param on should be true to enable public network mode
* @returns MDOT_OK if success
*/
@@ -303,6 +339,31 @@
*/
std::vector<uint8_t> getDeviceId();
+ /** Get the device port to be used for lora application data (1-223)
+ * @returns port
+ */
+ uint8_t getAppPort();
+
+ /** Set the device port to be used for lora application data (1-223)
+ * @returns MDOT_OK if success
+ */
+ int32_t setAppPort(uint8_t port);
+
+ /** Set the device class A, B or C
+ * @returns MDOT_OK if success
+ */
+ int32_t setClass(std::string newClass);
+
+ /** Get the device class A, B or C
+ * @returns MDOT_OK if success
+ */
+ std::string getClass();
+
+ /** Get the max packet length with current settings
+ * @returns max packet length
+ */
+ uint8_t getMaxPacketLength();
+
/** Set network address
* for use with MANUAL network join mode, will be assigned in OTA & AUTO_OTA modes
* @param addr a vector of 4 bytes
@@ -510,13 +571,54 @@
*/
uint32_t getNextTxMs();
+ /** Get join delay in seconds
+ * Public network defaults to 5 seconds
+ * Private network defaults to 1 second
+ * @returns number of seconds before join accept message is expected
+ */
+ uint8_t getJoinDelay();
+
+ /** Set join delay in seconds
+ * Public network defaults to 5 seconds
+ * Private network defaults to 1 second
+ * @param delay number of seconds before join accept message is expected
+ * @return MDOT_OK if success
+ */
+ uint32_t setJoinDelay(uint8_t delay);
+
+ /** Get rx delay in seconds
+ * Defaults to 1 second
+ * @returns number of seconds before response message is expected
+ */
+ uint8_t getRxDelay();
+
+ /** Set rx delay in seconds
+ * Defaults to 1 second
+ * @param delay number of seconds before response message is expected
+ * @return MDOT_OK if success
+ */
+ uint32_t setRxDelay(uint8_t delay);
+
+ /** Get preserve session to save network session info through reset or power down in AUTO_OTA mode
+ * Defaults to off
+ * @returns true if enabled
+ */
+ bool getPreserveSession();
+
+ /** Set preserve session to save network session info through reset or power down in AUTO_OTA mode
+ * Defaults to off
+ * @param enable
+ * @return MDOT_OK if success
+ */
+ uint32_t setPreserveSession(bool enable);
+
/** Get data pending
* only valid after sending data to the gateway
* @returns true if server has available packet(s)
*/
bool getDataPending();
- /** Get transmitting
+ /** Get transmitting
* @returns true if currently transmitting
*/
bool getIsTransmitting();
@@ -621,7 +723,6 @@
*/
int32_t recv(std::vector<uint8_t>& data);
-
/** Ping
* status will be MDOT_OK if ping succeeded
* @returns ping_response struct containing status, RSSI, and SNR
@@ -639,15 +740,14 @@
std::string getLastError();
/** Go to sleep
- * @param interval the number of seconds to sleep before waking up if wakeup_mode == RTC_ALARM, else ignored
- * @param wakeup_mode RTC_ALARM, INTERRUPT
+ * @param interval the number of seconds to sleep before waking up if wakeup_mode == RTC_ALARM or RTC_ALARM_OR_INTERRUPT, else ignored
+ * @param wakeup_mode RTC_ALARM, INTERRUPT, RTC_ALARM_OR_INTERRUPT
* if RTC_ALARM the real time clock is configured to wake the device up after the specified interval
* if INTERRUPT the device will wake up on the rising edge of the interrupt pin
+ * if RTC_ALARM_OR_INTERRUPT the device will wake on the first event to occur
* @param deepsleep if true go into deep sleep mode (lowest power, all memory and registers are lost, peripherals turned off)
* else go into sleep mode (low power, memory and registers are maintained, peripherals stay on)
*
- * ** CURRENTLY ONLY DEEPSLEEP MODE IS AVAILABLE **
- *
* in sleep mode, the device can be woken up on any of the XBEE pins or by the RTC alarm
* in deepsleep mode, the device can only be woken up using the WKUP pin (PA0, XBEE_DIO7) or by the RTC alarm
*/
@@ -853,7 +953,6 @@
// Convert pin name DIO2-DI8 to string
static std::string pinName2Str(PinName name);
-
uint64_t crc64(uint64_t crc, const unsigned char *s, uint64_t l);
// MTS_RADIO_DEBUG_COMMANDS
@@ -868,7 +967,6 @@
std::map<uint8_t, uint8_t> dumpRegisters();
void eraseFlash();
-
// deprecated - use setWakeInterval
int32_t setSerialWakeInterval(const uint32_t& interval);
// deprecated - use getWakeInterval