boting ren
STM32746G-Discovery board drivers V1.0.0
Dependents: F746_SD_GraphicEqualizer_ren0620
Fork of
BSP_DISCO_F746NG
by 
ST
Diff: stm32746g_discovery_camera.c
- Revision:
- 1:ee089790cdbb
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32746g_discovery_camera.c Mon Jan 04 15:19:15 2016 +0000
@@ -0,0 +1,674 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_camera.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file includes the driver for Camera modules mounted on
+ * STM32746G-Discovery board.
+ @verbatim
+ How to use this driver:
+ ------------------------
+ - This driver is used to drive the camera.
+ - The OV9655 component driver MUST be included with this driver.
+
+ Driver description:
+ -------------------
+ + Initialization steps:
+ o Initialize the camera using the BSP_CAMERA_Init() function.
+ o Start the camera capture/snapshot using the CAMERA_Start() function.
+ o Suspend, resume or stop the camera capture using the following functions:
+ - BSP_CAMERA_Suspend()
+ - BSP_CAMERA_Resume()
+ - BSP_CAMERA_Stop()
+
+ + Options
+ o Increase or decrease on the fly the brightness and/or contrast
+ using the following function:
+ - BSP_CAMERA_ContrastBrightnessConfig
+ o Add a special effect on the fly using the following functions:
+ - BSP_CAMERA_BlackWhiteConfig()
+ - BSP_CAMERA_ColorEffectConfig()
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery_camera.h"
+#include "stm32746g_discovery.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_CAMERA
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Private_TypesDefinitions STM32746G_DISCOVERY_CAMERA Private Types Definitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Private_Defines STM32746G_DISCOVERY_CAMERA Private Defines
+ * @{
+ */
+#define CAMERA_VGA_RES_X 640
+#define CAMERA_VGA_RES_Y 480
+#define CAMERA_480x272_RES_X 480
+#define CAMERA_480x272_RES_Y 272
+#define CAMERA_QVGA_RES_X 320
+#define CAMERA_QVGA_RES_Y 240
+#define CAMERA_QQVGA_RES_X 160
+#define CAMERA_QQVGA_RES_Y 120
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Private_Macros STM32746G_DISCOVERY_CAMERA Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Private_Variables STM32746G_DISCOVERY_CAMERA Private Variables
+ * @{
+ */
+static DCMI_HandleTypeDef hDcmiHandler;
+ CAMERA_DrvTypeDef *camera_drv;
+/* Camera current resolution naming (QQVGA, VGA, ...) */
+static uint32_t CameraCurrentResolution;
+
+/* Camera module I2C HW address */
+static uint32_t CameraHwAddress;
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Private_FunctionPrototypes STM32746G_DISCOVERY_CAMERA Private Function Prototypes
+ * @{
+ */
+static uint32_t GetSize(uint32_t resolution);
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Exported_Functions STM32746G_DISCOVERY_CAMERA Exported Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the camera.
+ * @param Resolution : camera sensor requested resolution (x, y) : standard resolution
+ * naming QQVGA, QVGA, VGA ...
+ * @retval Camera status
+ */
+uint8_t BSP_CAMERA_Init(uint32_t Resolution)
+{
+ DCMI_HandleTypeDef *phdcmi;
+ uint8_t status = CAMERA_ERROR;
+
+ /* Get the DCMI handle structure */
+ phdcmi = &hDcmiHandler;
+
+ /*** Configures the DCMI to interface with the camera module ***/
+ /* DCMI configuration */
+ phdcmi->Init.CaptureRate = DCMI_CR_ALL_FRAME;
+ phdcmi->Init.HSPolarity = DCMI_HSPOLARITY_LOW;
+ phdcmi->Init.SynchroMode = DCMI_SYNCHRO_HARDWARE;
+ phdcmi->Init.VSPolarity = DCMI_VSPOLARITY_HIGH;
+ phdcmi->Init.ExtendedDataMode = DCMI_EXTEND_DATA_8B;
+ phdcmi->Init.PCKPolarity = DCMI_PCKPOLARITY_RISING;
+ phdcmi->Instance = DCMI;
+
+ /* Power up camera */
+ BSP_CAMERA_PwrUp();
+
+ /* Read ID of Camera module via I2C */
+ if(ov9655_ReadID(CAMERA_I2C_ADDRESS) == OV9655_ID)
+ {
+ /* Initialize the camera driver structure */
+ camera_drv = &ov9655_drv;
+ CameraHwAddress = CAMERA_I2C_ADDRESS;
+
+ /* DCMI Initialization */
+ BSP_CAMERA_MspInit(&hDcmiHandler, NULL);
+ HAL_DCMI_Init(phdcmi);
+
+ /* Camera Module Initialization via I2C to the wanted 'Resolution' */
+ if (Resolution == CAMERA_R480x272)
+ { /* For 480x272 resolution, the OV9655 sensor is set to VGA resolution
+ * as OV9655 doesn't supports 480x272 resolution,
+ * then DCMI is configured to output a 480x272 cropped window */
+ camera_drv->Init(CameraHwAddress, CAMERA_R640x480);
+ HAL_DCMI_ConfigCROP(phdcmi, /* Crop in the middle of the VGA picture */
+ (CAMERA_VGA_RES_X - CAMERA_480x272_RES_X)/2,
+ (CAMERA_VGA_RES_Y - CAMERA_480x272_RES_Y)/2,
+ (CAMERA_480x272_RES_X * 2) - 1,
+ CAMERA_480x272_RES_Y - 1);
+ HAL_DCMI_EnableCROP(phdcmi);
+ }
+ else
+ {
+ camera_drv->Init(CameraHwAddress, Resolution);
+ HAL_DCMI_DisableCROP(phdcmi);
+ }
+
+ CameraCurrentResolution = Resolution;
+
+ /* Return CAMERA_OK status */
+ status = CAMERA_OK;
+ }
+ else
+ {
+ /* Return CAMERA_NOT_SUPPORTED status */
+ status = CAMERA_NOT_SUPPORTED;
+ }
+
+ return status;
+}
+
+/**
+ * @brief DeInitializes the camera.
+ * @retval Camera status
+ */
+uint8_t BSP_CAMERA_DeInit(void)
+{
+ hDcmiHandler.Instance = DCMI;
+
+ HAL_DCMI_DeInit(&hDcmiHandler);
+ BSP_CAMERA_MspDeInit(&hDcmiHandler, NULL);
+ return CAMERA_OK;
+}
+
+/**
+ * @brief Starts the camera capture in continuous mode.
+ * @param buff: pointer to the camera output buffer
+ * @retval None
+ */
+void BSP_CAMERA_ContinuousStart(uint8_t *buff)
+{
+ /* Start the camera capture */
+ HAL_DCMI_Start_DMA(&hDcmiHandler, DCMI_MODE_CONTINUOUS, (uint32_t)buff, GetSize(CameraCurrentResolution));
+}
+
+/**
+ * @brief Starts the camera capture in snapshot mode.
+ * @param buff: pointer to the camera output buffer
+ * @retval None
+ */
+void BSP_CAMERA_SnapshotStart(uint8_t *buff)
+{
+ /* Start the camera capture */
+ HAL_DCMI_Start_DMA(&hDcmiHandler, DCMI_MODE_SNAPSHOT, (uint32_t)buff, GetSize(CameraCurrentResolution));
+}
+
+/**
+ * @brief Suspend the CAMERA capture
+ * @retval None
+ */
+void BSP_CAMERA_Suspend(void)
+{
+ /* Disable the DMA */
+ __HAL_DMA_DISABLE(hDcmiHandler.DMA_Handle);
+ /* Disable the DCMI */
+ __HAL_DCMI_DISABLE(&hDcmiHandler);
+
+}
+
+/**
+ * @brief Resume the CAMERA capture
+ * @retval None
+ */
+void BSP_CAMERA_Resume(void)
+{
+ /* Enable the DCMI */
+ __HAL_DCMI_ENABLE(&hDcmiHandler);
+ /* Enable the DMA */
+ __HAL_DMA_ENABLE(hDcmiHandler.DMA_Handle);
+}
+
+/**
+ * @brief Stop the CAMERA capture
+ * @retval Camera status
+ */
+uint8_t BSP_CAMERA_Stop(void)
+{
+ uint8_t status = CAMERA_ERROR;
+
+ if(HAL_DCMI_Stop(&hDcmiHandler) == HAL_OK)
+ {
+ status = CAMERA_OK;
+ }
+
+ /* Set Camera in Power Down */
+ BSP_CAMERA_PwrDown();
+
+ return status;
+}
+
+/**
+ * @brief CANERA power up
+ * @retval None
+ */
+void BSP_CAMERA_PwrUp(void)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Enable GPIO clock */
+ __HAL_RCC_GPIOH_CLK_ENABLE();
+
+ /*** Configure the GPIO ***/
+ /* Configure DCMI GPIO as alternate function */
+ gpio_init_structure.Pin = GPIO_PIN_13;
+ gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ HAL_GPIO_Init(GPIOH, &gpio_init_structure);
+
+ /* De-assert the camera POWER_DOWN pin (active high) */
+ HAL_GPIO_WritePin(GPIOH, GPIO_PIN_13, GPIO_PIN_RESET);
+
+ HAL_Delay(3); /* POWER_DOWN de-asserted during 3ms */
+}
+
+/**
+ * @brief CAMERA power down
+ * @retval None
+ */
+void BSP_CAMERA_PwrDown(void)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Enable GPIO clock */
+ __HAL_RCC_GPIOH_CLK_ENABLE();
+
+ /*** Configure the GPIO ***/
+ /* Configure DCMI GPIO as alternate function */
+ gpio_init_structure.Pin = GPIO_PIN_13;
+ gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ HAL_GPIO_Init(GPIOH, &gpio_init_structure);
+
+ /* Assert the camera POWER_DOWN pin (active high) */
+ HAL_GPIO_WritePin(GPIOH, GPIO_PIN_13, GPIO_PIN_SET);
+}
+
+/**
+ * @brief Configures the camera contrast and brightness.
+ * @param contrast_level: Contrast level
+ * This parameter can be one of the following values:
+ * @arg CAMERA_CONTRAST_LEVEL4: for contrast +2
+ * @arg CAMERA_CONTRAST_LEVEL3: for contrast +1
+ * @arg CAMERA_CONTRAST_LEVEL2: for contrast 0
+ * @arg CAMERA_CONTRAST_LEVEL1: for contrast -1
+ * @arg CAMERA_CONTRAST_LEVEL0: for contrast -2
+ * @param brightness_level: Contrast level
+ * This parameter can be one of the following values:
+ * @arg CAMERA_BRIGHTNESS_LEVEL4: for brightness +2
+ * @arg CAMERA_BRIGHTNESS_LEVEL3: for brightness +1
+ * @arg CAMERA_BRIGHTNESS_LEVEL2: for brightness 0
+ * @arg CAMERA_BRIGHTNESS_LEVEL1: for brightness -1
+ * @arg CAMERA_BRIGHTNESS_LEVEL0: for brightness -2
+ * @retval None
+ */
+void BSP_CAMERA_ContrastBrightnessConfig(uint32_t contrast_level, uint32_t brightness_level)
+{
+ if(camera_drv->Config != NULL)
+ {
+ camera_drv->Config(CameraHwAddress, CAMERA_CONTRAST_BRIGHTNESS, contrast_level, brightness_level);
+ }
+}
+
+/**
+ * @brief Configures the camera white balance.
+ * @param Mode: black_white mode
+ * This parameter can be one of the following values:
+ * @arg CAMERA_BLACK_WHITE_BW
+ * @arg CAMERA_BLACK_WHITE_NEGATIVE
+ * @arg CAMERA_BLACK_WHITE_BW_NEGATIVE
+ * @arg CAMERA_BLACK_WHITE_NORMAL
+ * @retval None
+ */
+void BSP_CAMERA_BlackWhiteConfig(uint32_t Mode)
+{
+ if(camera_drv->Config != NULL)
+ {
+ camera_drv->Config(CameraHwAddress, CAMERA_BLACK_WHITE, Mode, 0);
+ }
+}
+
+/**
+ * @brief Configures the camera color effect.
+ * @param Effect: Color effect
+ * This parameter can be one of the following values:
+ * @arg CAMERA_COLOR_EFFECT_ANTIQUE
+ * @arg CAMERA_COLOR_EFFECT_BLUE
+ * @arg CAMERA_COLOR_EFFECT_GREEN
+ * @arg CAMERA_COLOR_EFFECT_RED
+ * @retval None
+ */
+void BSP_CAMERA_ColorEffectConfig(uint32_t Effect)
+{
+ if(camera_drv->Config != NULL)
+ {
+ camera_drv->Config(CameraHwAddress, CAMERA_COLOR_EFFECT, Effect, 0);
+ }
+}
+
+/**
+ * @brief Handles DCMI interrupt request.
+ * @retval None
+ */
+void BSP_CAMERA_IRQHandler(void)
+{
+ HAL_DCMI_IRQHandler(&hDcmiHandler);
+}
+
+/**
+ * @brief Handles DMA interrupt request.
+ * @retval None
+ */
+void BSP_CAMERA_DMA_IRQHandler(void)
+{
+ HAL_DMA_IRQHandler(hDcmiHandler.DMA_Handle);
+}
+
+/**
+ * @brief Get the capture size in pixels unit.
+ * @param resolution: the current resolution.
+ * @retval capture size in pixels unit.
+ */
+static uint32_t GetSize(uint32_t resolution)
+{
+ uint32_t size = 0;
+
+ /* Get capture size */
+ switch (resolution)
+ {
+ case CAMERA_R160x120:
+ {
+ size = 0x2580;
+ }
+ break;
+ case CAMERA_R320x240:
+ {
+ size = 0x9600;
+ }
+ break;
+ case CAMERA_R480x272:
+ {
+ size = 0xFF00;
+ }
+ break;
+ case CAMERA_R640x480:
+ {
+ size = 0x25800;
+ }
+ break;
+ default:
+ {
+ break;
+ }
+ }
+
+ return size;
+}
+
+/**
+ * @brief Initializes the DCMI MSP.
+ * @param hdcmi: HDMI handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_CAMERA_MspInit(DCMI_HandleTypeDef *hdcmi, void *Params)
+{
+ static DMA_HandleTypeDef hdma_handler;
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /*** Enable peripherals and GPIO clocks ***/
+ /* Enable DCMI clock */
+ __HAL_RCC_DCMI_CLK_ENABLE();
+
+ /* Enable DMA2 clock */
+ __HAL_RCC_DMA2_CLK_ENABLE();
+
+ /* Enable GPIO clocks */
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_GPIOD_CLK_ENABLE();
+ __HAL_RCC_GPIOE_CLK_ENABLE();
+ __HAL_RCC_GPIOG_CLK_ENABLE();
+ __HAL_RCC_GPIOH_CLK_ENABLE();
+
+ /*** Configure the GPIO ***/
+ /* Configure DCMI GPIO as alternate function */
+ gpio_init_structure.Pin = GPIO_PIN_4 | GPIO_PIN_6;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF13_DCMI;
+ HAL_GPIO_Init(GPIOA, &gpio_init_structure);
+
+ gpio_init_structure.Pin = GPIO_PIN_3;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF13_DCMI;
+ HAL_GPIO_Init(GPIOD, &gpio_init_structure);
+
+ gpio_init_structure.Pin = GPIO_PIN_5 | GPIO_PIN_6;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF13_DCMI;
+ HAL_GPIO_Init(GPIOE, &gpio_init_structure);
+
+ gpio_init_structure.Pin = GPIO_PIN_9;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF13_DCMI;
+ HAL_GPIO_Init(GPIOG, &gpio_init_structure);
+
+ gpio_init_structure.Pin = GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 |\
+ GPIO_PIN_12 | GPIO_PIN_14;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF13_DCMI;
+ HAL_GPIO_Init(GPIOH, &gpio_init_structure);
+
+ /*** Configure the DMA ***/
+ /* Set the parameters to be configured */
+ hdma_handler.Init.Channel = DMA_CHANNEL_1;
+ hdma_handler.Init.Direction = DMA_PERIPH_TO_MEMORY;
+ hdma_handler.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma_handler.Init.MemInc = DMA_MINC_ENABLE;
+ hdma_handler.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
+ hdma_handler.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
+ hdma_handler.Init.Mode = DMA_CIRCULAR;
+ hdma_handler.Init.Priority = DMA_PRIORITY_HIGH;
+ hdma_handler.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
+ hdma_handler.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
+ hdma_handler.Init.MemBurst = DMA_MBURST_SINGLE;
+ hdma_handler.Init.PeriphBurst = DMA_PBURST_SINGLE;
+
+ hdma_handler.Instance = DMA2_Stream1;
+
+ /* Associate the initialized DMA handle to the DCMI handle */
+ __HAL_LINKDMA(hdcmi, DMA_Handle, hdma_handler);
+
+ /*** Configure the NVIC for DCMI and DMA ***/
+ /* NVIC configuration for DCMI transfer complete interrupt */
+ HAL_NVIC_SetPriority(DCMI_IRQn, 5, 0);
+ HAL_NVIC_EnableIRQ(DCMI_IRQn);
+
+ /* NVIC configuration for DMA2D transfer complete interrupt */
+ HAL_NVIC_SetPriority(DMA2_Stream1_IRQn, 5, 0);
+ HAL_NVIC_EnableIRQ(DMA2_Stream1_IRQn);
+
+ /* Configure the DMA stream */
+ HAL_DMA_Init(hdcmi->DMA_Handle);
+}
+
+
+/**
+ * @brief DeInitializes the DCMI MSP.
+ * @param hdcmi: HDMI handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_CAMERA_MspDeInit(DCMI_HandleTypeDef *hdcmi, void *Params)
+{
+ /* Disable NVIC for DCMI transfer complete interrupt */
+ HAL_NVIC_DisableIRQ(DCMI_IRQn);
+
+ /* Disable NVIC for DMA2 transfer complete interrupt */
+ HAL_NVIC_DisableIRQ(DMA2_Stream1_IRQn);
+
+ /* Configure the DMA stream */
+ HAL_DMA_DeInit(hdcmi->DMA_Handle);
+
+ /* Disable DCMI clock */
+ __HAL_RCC_DCMI_CLK_DISABLE();
+
+ /* GPIO pins clock and DMA clock can be shut down in the application
+ by surcharging this __weak function */
+}
+
+/**
+ * @brief Line event callback
+ * @param hdcmi: pointer to the DCMI handle
+ * @retval None
+ */
+void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ BSP_CAMERA_LineEventCallback();
+}
+
+/**
+ * @brief Line Event callback.
+ * @retval None
+ */
+__weak void BSP_CAMERA_LineEventCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_LineEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief VSYNC event callback
+ * @param hdcmi: pointer to the DCMI handle
+ * @retval None
+ */
+void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ BSP_CAMERA_VsyncEventCallback();
+}
+
+/**
+ * @brief VSYNC Event callback.
+ * @retval None
+ */
+__weak void BSP_CAMERA_VsyncEventCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_VsyncEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Frame event callback
+ * @param hdcmi: pointer to the DCMI handle
+ * @retval None
+ */
+void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ BSP_CAMERA_FrameEventCallback();
+}
+
+/**
+ * @brief Frame Event callback.
+ * @retval None
+ */
+__weak void BSP_CAMERA_FrameEventCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_FrameEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Error callback
+ * @param hdcmi: pointer to the DCMI handle
+ * @retval None
+ */
+void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ BSP_CAMERA_ErrorCallback();
+}
+
+/**
+ * @brief Error callback.
+ * @retval None
+ */
+__weak void BSP_CAMERA_ErrorCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/