Basic LoRa receiver example
radio chip selection
Radio chip driver is not included, allowing choice of radio device.
If you're using SX1272 or SX1276, then import sx127x driver into your program.
if you're using SX1261 or SX1262, then import sx126x driver into your program.
if you're using SX1280, then import sx1280 driver into your program.
if you're using LR1110, then import LR1110 driver into your program.
If you're using NAmote72 or Murata discovery, then you must import only sx127x driver.
If you're using Type1SJ select target DISCO_L072CZ_LRWAN1
and import sx126x driver into your program.
On default serial port, this project will print out (at 9600bps) reset-rx
once at startup.
Use project simple_tx on transmtting end.
main.cpp
- Committer:
- Wayne Roberts
- Date:
- 2020-06-12
- Revision:
- 5:6269ee8fe13f
- Parent:
- 4:db424a8eb3c6
File content as of revision 5:6269ee8fe13f:
#include "radio.h" #if defined(SX128x_H) #define BW_KHZ 200 #define SPREADING_FACTOR 7 #define CF_HZ 2487000000 #define TX_DBM 6 #else #if defined(SX128x_H) #define TX_DBM (Radio::chipType == CHIP_TYPE_SX1262 ? 20 : 14) #else #define TX_DBM 20 #endif #define BW_KHZ 125 #define SPREADING_FACTOR 7 #define CF_HZ 915000000 #endif DigitalOut myled(LED1); /**********************************************************************/ void txDoneCB() { } void rxDoneCB(uint8_t size, float rssi, float snr) { unsigned i; printf("%.1fdBm snr:%.1fdB\t", rssi, snr); myled.write(!myled.read()); // toggle LED for (i = 0; i < size; i++) { printf("%02x ", Radio::radio.rx_buf[i]); } printf("\r\n"); } const RadioEvents_t rev = { /* Dio0_top_half */ NULL, /* TxDone_topHalf */ NULL, /* TxDone_botHalf */ txDoneCB, /* TxTimeout */ NULL, /* RxDone */ rxDoneCB, /* RxTimeout */ NULL, /* RxError */ NULL, /* FhssChangeChannel */NULL, /* CadDone */ NULL }; int main() { printf("\r\nreset-rx\r\n"); Radio::Init(&rev); Radio::Standby(); Radio::LoRaModemConfig(BW_KHZ, SPREADING_FACTOR, 1); Radio::SetChannel(CF_HZ); // preambleLen, fixLen, crcOn, invIQ Radio::LoRaPacketConfig(8, false, true, false); Radio::Rx(0); for (;;) { Radio::service(); } }