wayne roberts / Mbed OS CB-LORA-MR_utility

test sending sensor results over lora radio. Accelerometer and temp/pressure.

Dependencies:   SX127x

Serial terminal operates at 115200.

This project provides a text-based menu over serial port.
Operating the program only requires using the arrow keys, enter key to activate a control, or entering numbers.

Two sensors provided:


LIS12DH12 accelerometer operates in a continuous sampling mode. Enable control for accelerometer enables this continuous sampling, approx every 3 seconds.
LPS22HH temperature / pressure sensor operates as single shot, where pressing the control button on terminal causes single sample to be performed.

poll rate control will enable repeated reading of pressure/temperature-sensor or photo-sensor when poll rate is greater than zero.

target must be: DISCO_L072CZ_LRWAN1

Diff: mbed-os.lib

Revision:
0:e1e70da93044
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os.lib	Wed Apr 24 10:11:06 2019 -0700
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/mbed-os/#0063e5de32fc575f061244c96ac60c41c07bd2e6