Diff: main.cpp

Revision:

3:a38ad504a18c

Parent:

2:3e7685cfb2a7

Child:

15:990a8b5664e1

diff -r 3e7685cfb2a7 -r a38ad504a18c main.cpp
--- a/main.cpp	Thu Mar 05 15:47:08 2015 +0000
+++ b/main.cpp	Thu Mar 05 16:37:54 2015 +0000
@@ -1,7 +1,6 @@
 #include "mbed.h"
 
 #include "driverDebug.h"
-
 #include "socket_api.h"
 #include "net_interface.h"
 #include "system_event.h"
@@ -16,19 +15,11 @@
 #include "common_functions.h"
 #include "driverRFPhy.h"
 #include "driverAtmelRFInterface.h"
-
 #include "nsdl_support.h"
 #include "node_cfg.h"
 
-#if NODE_SENSOR_STATION
-//  #include "DHT.h"
-  #include "BMP085.h"
-#endif
-
-
 /*** DEBUG ******/
 #define DEBUG       1
-
 #if DEBUG
 #define debug   printf
 #else
@@ -43,22 +34,6 @@
   InterruptIn TAP_INT(PTC6);  // INT1 from FXOS8700Q
 #endif
 
-#if NODE_HOME
-DigitalOut  light(D2);
-DigitalOut  fire(D3);
-DigitalOut  fan(D4);
-InterruptIn motion(D6);
-DigitalIn door(D8);
-#endif
-
-#if NODE_SENSOR_STATION
-//DHT sensor(D2, DHT11);
-BMP085 barometer(D14, D15);
-AnalogIn moisture(A0);
-AnalogIn HCHO(A1);
-AnalogIn UVsensor(A2);
-#endif
-
 /*******  Timers Definitions   ************/
 #define RETRY_TIMER             1
 #define NSP_REGISTRATION_TIMER  2
@@ -69,17 +44,14 @@
   #define DOOR_CHECK_TIMER        4
 #endif
 
-
 void app_heap_error_handler(heap_fail_t event);
 void tasklet_main(arm_event_s *event);
 void button_main(arm_event_s *event);
 
-
 #define APP_DEV_HEAP_SIZE 6000
 static uint8_t app_defined_stack_heap[APP_DEV_HEAP_SIZE];
 static int8_t main_tasklet_id = -1;
 
-
 static const uint8_t app_MAC_address[8] = NODE_MAC_ADDRESS;
 static int8_t rf_phy_device_register_id = -1;
 static int8_t net_6lowpan_id = -1;
@@ -87,12 +59,12 @@
 
 int8_t coap_udp_socket = -1;
 
-#define AUDP_SOCKET_PORT    61630
+#define AUDP_SOCKET_PORT     61630
 #define RECV_CTRL_UDP_PORT   1050    // receive
 #define SEND_CTRL_UDP_PORT   1060    // send
 
 /** Used for Receive Data source Address store*/
-static  ns_address_t app_src;
+static ns_address_t app_src;
 static sn_nsdl_addr_s sn_addr_s;
 
 static int access_point_status = 0;
@@ -116,19 +88,6 @@
 
 
 /* #defines, definitions and declarations according node profile  */
-#if NODE_HOME
-#define DOOR_CHECK_TIME     1000
-uint8_t door_last_state = 0;
-/* Since the PIR Motion detector throws a (false) trigger everytime the
-other sensors/actuators change (possibly an interference), we will need
-to disable it for 1s. So every time the sensors/actuators change, we set a variable
-which is reset in the DOOR_CHECK_TIMER. This variable needs to be cleared to
-consider a real motion detection */
-uint8_t motion_disable = 0;         
-int8_t ctrl_udp_socket = -1;
-void ctrl_udp_receive(void * cb);
-void ctrl_udp_send(uint8_t cmd);
-#endif
 
 #if NODE_CONTROLLER
 int8_t ctrl_udp_socket = -1;
@@ -362,20 +321,6 @@
 }
 #endif
 
-#if NODE_HOME
-void motion_handler(void)
-{
-  if (motion_disable)
-    return;
-  printf("***************Motion Detected!**********************\r\n");
-  if (door)
-    ctrl_udp_send('O');
-  else
-    ctrl_udp_send('C');
-}
-#endif
-
-
 int main()
 {
 #if NODE_CONTROLLER      
@@ -385,11 +330,6 @@
   TAP_INT.rise(&tap_detector_handler); 
 #endif
  
-#if NODE_HOME  
-  light = 0;
-  motion.rise(&motion_handler);
-#endif
-     
   debug("\r\nApplication Start\r\n");
   ns_dyn_mem_init(app_defined_stack_heap, APP_DEV_HEAP_SIZE, app_heap_error_handler,0);
   rf_set_mac_address(app_MAC_address);
@@ -594,13 +534,6 @@
         timer_sys_event(ACCELEROMETER_TIMER, ACCEL_SAMPLE_TIME);
 #endif  
         multicast_set_parameters(10,0,20,3,75 );
-                                       
-#if NODE_HOME
-        /* open a socket to support control from NODE_CONTROLLER */                                             
-        ctrl_udp_socket = socket_open(SOCKET_UDP, RECV_CTRL_UDP_PORT, ctrl_udp_receive);
-        /* init a timer to check door state  */
-        timer_sys_event(DOOR_CHECK_TIMER, DOOR_CHECK_TIME);
-#endif
 
 #if NODE_CONTROLLER
         /* open a socket to support control for REMOTE_NODE */                                             
@@ -693,19 +626,7 @@
           timer_sys_event(ACCELEROMETER_TIMER, ACCEL_SAMPLE_TIME);   
         }    
 #endif  
-#if NODE_HOME        
-        else if (event->event_id == DOOR_CHECK_TIMER)
-        {
-          uint8_t door_state = door.read();
-          if (door_state != door_last_state) 
-          {
-            door_last_state = door_state;
-            printf("Door state %d\r\n", door_state);
-          }            
-          motion_disable = 0;
-          timer_sys_event(DOOR_CHECK_TIMER, DOOR_CHECK_TIME);   
-        }    
-#endif       
+
         break;
                                 
       default:
@@ -773,112 +694,6 @@
 #endif   
 }
 
-#if NODE_HOME
-/******  Control UDP Socket Receive  *******/
-void ctrl_udp_receive(void * cb)
-{
-  socket_callback_t * cb_res =0;
-  int16_t length;
-  cb_res = (socket_callback_t *) cb;
-
-  if(cb_res->event_type == SOCKET_DATA)
-  {
-    uint8_t *payload = 0;
-    /*Read Data*/
-    if ( cb_res->d_len > 0)
-    {
-      /*Read data to the RX buffer*/
-      payload = (uint8_t *) ns_dyn_mem_alloc(cb_res->d_len);
-      if(payload)
-      {
-        /*Read data to the RX buffer*/
-        length = socket_read(cb_res->socket_id, &app_src, payload, cb_res->d_len);
-        if(length)
-        {
-          uint8_t * ptr = payload ;
-          /*Handles data received in UDP socket*/
-          debug("UDP Data From: ");
-          printf_ipv6_address(&(app_src.address[0]));        //REVIEW
-          
-          if(app_src.identifier == SEND_CTRL_UDP_PORT)       // check source port to avoid interference
-          {
-            debug("Data: ");
-            printf("%s\r\n",ptr);     
-            switch(payload[0]) {
-              case 'R':
-                fire = !fire;
-                fan = 0;
-                break;    
-              case 'G':
-                light = !light; 
-                break;              
-              case 'B':
-                fan = !fan;
-                fire = 0; 
-                break;              
-            } 
-            motion_disable = 1;
-          }  
-        }
-        ns_dyn_mem_free(payload);
-      }
-    }
-    else
-    {
-      debug("No Data\r\n");
-      socket_read(cb_res->socket_id, &app_src, NULL, 0);
-    }
-  }
-  else if(cb_res->event_type == SOCKET_TX_DONE)
-  {
-    debug("UDP TX Done\r\n");
-  }
-  /* No Route to Packet Destination Address */
-  else if(cb_res->event_type == SOCKET_NO_ROUTE) 
-  {
-    debug("ND/RPL not ready\r\n");
-  }
-  /* Link Layer TX Fail for socket packet */
-  else if(cb_res->event_type == SOCKET_TX_FAIL)
-  {
-    debug("Link Layer Tx fail\r\n");
-  }
-}
-
-void ctrl_udp_send(uint8_t cmd)
-{
-  uint8_t * payload = 0;
-  ns_address_t address;
-  /*SET UDP echo Port*/
-  address.identifier = ALARM_CTRL_UDP_PORT;  
-
-  uint8_t node_address[16] = ALARM_IP_ADDRESS;       
-    
-  payload = (uint8_t *) ns_dyn_mem_alloc(1);        
-  if(payload)
-  {
-    uint8_t *ptr = payload;
-     
-    memcpy(address.address,node_address,16); 
-    address.type = ADDRESS_IPV6;
-    *ptr = cmd;
-    if(socket_sendto(ctrl_udp_socket, &address, payload, (1)) != 0)
-    {
-      debug("Ctrl UDP Failed\r\n");
-    }
-    else
-    {
-      debug("Ctrl UDP Ok\r\n");
-    }
-    ns_dyn_mem_free(payload);
-  }
-  else
-  {
-    debug("No Heap for Ctrl UDP\r\n");
-  }
-}
-#endif
-
 #if NODE_CONTROLLER 
 void ctrl_udp_send(uint8_t cmd)
 {