MCU driver/HAL for the Picocell Gateway concentrator board. The firmware implements either a USB CDC protocol or a UART protocol to bridge commands coming from host to the SX1308 SPI interface.

Revision:
0:c76361bd82e8
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/usbd_cdc.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/usbd_cdc.h	Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,179 @@
+/**
+  ******************************************************************************
+  * @file    usbd_cdc.h
+  * @author  MCD Application Team
+  * @version V2.4.2
+  * @date    11-December-2015
+  * @brief   header file for the usbd_cdc.c file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */ 
+ 
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_CDC_H
+#define __USB_CDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include  "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+  * @{
+  */
+  
+/** @defgroup usbd_cdc
+  * @brief This file is the Header file for usbd_cdc.c
+  * @{
+  */ 
+
+
+/** @defgroup usbd_cdc_Exported_Defines
+  * @{
+  */ 
+#define CDC_IN_EP                                   0x81  /* EP1 for data IN */
+#define CDC_OUT_EP                                  0x01  /* EP1 for data OUT */
+#define CDC_CMD_EP                                  0x82  /* EP2 for CDC commands */
+
+/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */
+#define CDC_DATA_HS_MAX_PACKET_SIZE                 512  /* Endpoint IN & OUT Packet size */
+#define CDC_DATA_FS_MAX_PACKET_SIZE                 64  /* Endpoint IN & OUT Packet size */
+#define CDC_CMD_PACKET_SIZE                         8  /* Control Endpoint Packet size */ 
+
+#define USB_CDC_CONFIG_DESC_SIZ                     67
+#define CDC_DATA_HS_IN_PACKET_SIZE                  CDC_DATA_HS_MAX_PACKET_SIZE
+#define CDC_DATA_HS_OUT_PACKET_SIZE                 CDC_DATA_HS_MAX_PACKET_SIZE
+
+#define CDC_DATA_FS_IN_PACKET_SIZE                  CDC_DATA_FS_MAX_PACKET_SIZE
+#define CDC_DATA_FS_OUT_PACKET_SIZE                 CDC_DATA_FS_MAX_PACKET_SIZE
+
+/*---------------------------------------------------------------------*/
+/*  CDC definitions                                                    */
+/*---------------------------------------------------------------------*/
+#define CDC_SEND_ENCAPSULATED_COMMAND               0x00
+#define CDC_GET_ENCAPSULATED_RESPONSE               0x01
+#define CDC_SET_COMM_FEATURE                        0x02
+#define CDC_GET_COMM_FEATURE                        0x03
+#define CDC_CLEAR_COMM_FEATURE                      0x04
+#define CDC_SET_LINE_CODING                         0x20
+#define CDC_GET_LINE_CODING                         0x21
+#define CDC_SET_CONTROL_LINE_STATE                  0x22
+#define CDC_SEND_BREAK                              0x23
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+typedef struct
+{
+  uint32_t bitrate;
+  uint8_t  format;
+  uint8_t  paritytype;
+  uint8_t  datatype;
+}USBD_CDC_LineCodingTypeDef;
+
+typedef struct _USBD_CDC_Itf
+{
+  int8_t (* Init)          (void);
+  int8_t (* DeInit)        (void);
+  int8_t (* Control)       (uint8_t, uint8_t * , uint16_t);   
+  int8_t (* Receive)       (uint8_t *, uint32_t *);  
+
+}USBD_CDC_ItfTypeDef;
+
+
+typedef struct
+{
+  uint32_t data[CDC_DATA_HS_MAX_PACKET_SIZE/4];      /* Force 32bits alignment */
+  uint8_t  CmdOpCode;
+  uint8_t  CmdLength;    
+  uint8_t  *RxBuffer;  
+  uint8_t  *TxBuffer;   
+  uint32_t RxLength;
+  uint32_t TxLength;    
+  
+  __IO uint32_t TxState;     
+  __IO uint32_t RxState;    
+}
+USBD_CDC_HandleTypeDef; 
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+  * @{
+  */ 
+  
+/**
+  * @}
+  */ 
+
+/** @defgroup USBD_CORE_Exported_Variables
+  * @{
+  */ 
+
+extern USBD_ClassTypeDef  USBD_CDC;
+#define USBD_CDC_CLASS    &USBD_CDC
+/**
+  * @}
+  */ 
+
+/** @defgroup USB_CORE_Exported_Functions
+  * @{
+  */
+uint8_t  USBD_CDC_RegisterInterface  (USBD_HandleTypeDef   *pdev, 
+                                      USBD_CDC_ItfTypeDef *fops);
+
+uint8_t  USBD_CDC_SetTxBuffer        (USBD_HandleTypeDef   *pdev,
+                                      uint8_t  *pbuff,
+                                      uint16_t length);
+
+uint8_t  USBD_CDC_SetRxBuffer        (USBD_HandleTypeDef   *pdev,
+                                      uint8_t  *pbuff);
+  
+uint8_t  USBD_CDC_ReceivePacket      (USBD_HandleTypeDef *pdev);
+
+uint8_t  USBD_CDC_TransmitPacket     (USBD_HandleTypeDef *pdev);
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* __USB_CDC_H */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/