MCU driver/HAL for the Picocell Gateway concentrator board. The firmware implements either a USB CDC protocol or a UART protocol to bridge commands coming from host to the SX1308 SPI interface.
Diff: src/mbed-dev/common/CAN.cpp
- Revision:
- 0:c76361bd82e8
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/CAN.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed-dev/common/CAN.cpp Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,123 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include "CAN.h" + +#if DEVICE_CAN + +#include "cmsis.h" + +namespace mbed { + +CAN::CAN(PinName rd, PinName td) : _can(), _irq() { + // No lock needed in constructor + can_init(&_can, rd, td); + can_irq_init(&_can, (&CAN::_irq_handler), (uint32_t)this); +} + +CAN::~CAN() { + // No lock needed in destructor + can_irq_free(&_can); + can_free(&_can); +} + +int CAN::frequency(int f) { + lock(); + int ret = can_frequency(&_can, f); + unlock(); + return ret; +} + +int CAN::write(CANMessage msg) { + lock(); + int ret = can_write(&_can, msg, 0); + unlock(); + return ret; +} + +int CAN::read(CANMessage &msg, int handle) { + lock(); + int ret = can_read(&_can, &msg, handle); + unlock(); + return ret; +} + +void CAN::reset() { + lock(); + can_reset(&_can); + unlock(); +} + +unsigned char CAN::rderror() { + lock(); + int ret = can_rderror(&_can); + unlock(); + return ret; +} + +unsigned char CAN::tderror() { + lock(); + int ret = can_tderror(&_can); + unlock(); + return ret; +} + +void CAN::monitor(bool silent) { + lock(); + can_monitor(&_can, (silent) ? 1 : 0); + unlock(); +} + +int CAN::mode(Mode mode) { + lock(); + int ret = can_mode(&_can, (CanMode)mode); + unlock(); + return ret; +} + +int CAN::filter(unsigned int id, unsigned int mask, CANFormat format, int handle) { + lock(); + int ret = can_filter(&_can, id, mask, format, handle); + unlock(); + return ret; +} + +void CAN::attach(Callback<void()> func, IrqType type) { + lock(); + if (func) { + _irq[(CanIrqType)type].attach(func); + can_irq_set(&_can, (CanIrqType)type, 1); + } else { + can_irq_set(&_can, (CanIrqType)type, 0); + } + unlock(); +} + +void CAN::_irq_handler(uint32_t id, CanIrqType type) { + CAN *handler = (CAN*)id; + handler->_irq[type].call(); +} + +void CAN::lock() { + _mutex.lock(); +} + +void CAN::unlock() { + _mutex.unlock(); +} + +} // namespace mbed + +#endif