MCU driver/HAL for the Picocell Gateway concentrator board. The firmware implements either a USB CDC protocol or a UART protocol to bridge commands coming from host to the SX1308 SPI interface.

src/usb_cdc/Inc/usbd_conf.h

Committer:
dgabino
Date:
2018-04-11
Revision:
0:c76361bd82e8

File content as of revision 0:c76361bd82e8:

/**
  ******************************************************************************
  * @file           : usbd_conf.h
  * @version        : v1.0_Cube
  * @brief          : Header for usbd_conf file.
  ******************************************************************************
  * COPYRIGHT(c) 2016 STMicroelectronics
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  * 1. Redistributions of source code must retain the above copyright notice,
  * this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  * 3. Neither the name of STMicroelectronics nor the names of its contributors
  * may be used to endorse or promote products derived from this software
  * without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_CONF__H__
#define __USBD_CONF__H__
#ifdef __cplusplus
 extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "stm32f4xx.h"
#include "stm32f4xx_hal.h"

/** @addtogroup USBD_OTG_DRIVER
  * @{
  */
  
/** @defgroup USBD_CONF
  * @brief usb otg low level driver configuration file
  * @{
  */ 

/** @defgroup USBD_CONF_Exported_Defines
  * @{
  */ 

/*---------- -----------*/
#define USBD_MAX_NUM_INTERFACES     1
/*---------- -----------*/
#define USBD_MAX_NUM_CONFIGURATION     1
/*---------- -----------*/
#define USBD_MAX_STR_DESC_SIZ     512
/*---------- -----------*/
#define USBD_SUPPORT_USER_STRING     0
/*---------- -----------*/
#define USBD_DEBUG_LEVEL     0
/*---------- -----------*/
#define USBD_LPM_ENABLED     0
/*---------- -----------*/
#define USBD_SELF_POWERED     1
/*---------- -----------*/
#define USBD_CDC_INTERVAL     1000

/****************************************/
/* #define for FS and HS identification */
#define DEVICE_FS 		0
#define DEVICE_HS 		1

/** @defgroup USBD_Exported_Macros
  * @{
  */ 

 /* Memory management macros */   
#define USBD_malloc               malloc
#define USBD_free                 free
#define USBD_memset               memset
#define USBD_memcpy               memcpy

#define USBD_Delay   HAL_Delay
    
 /* DEBUG macros */  

#if (USBD_DEBUG_LEVEL > 0)
#define  USBD_UsrLog(...)   printf(__VA_ARGS__);\
                            printf("\n");
#else
#define USBD_UsrLog(...)   
#endif 
                            
                            
#if (USBD_DEBUG_LEVEL > 1)

#define  USBD_ErrLog(...)   printf("ERROR: ") ;\
                            printf(__VA_ARGS__);\
                            printf("\n");
#else
#define USBD_ErrLog(...)   
#endif 
                            
                            
#if (USBD_DEBUG_LEVEL > 2)                         
#define  USBD_DbgLog(...)   printf("DEBUG : ") ;\
                            printf(__VA_ARGS__);\
                            printf("\n");
#else
#define USBD_DbgLog(...)                         
#endif
                            
/**
  * @}
  */ 
 
    
    
/**
  * @}
  */ 

/** @defgroup USBD_CONF_Exported_Types
  * @{
  */ 
/**
  * @}
  */ 

/** @defgroup USBD_CONF_Exported_Macros
  * @{
  */ 
/**
  * @}
  */ 

/** @defgroup USBD_CONF_Exported_Variables
  * @{
  */ 
/**
  * @}
  */ 

/** @defgroup USBD_CONF_Exported_FunctionsPrototype
  * @{
  */ 
/**
  * @}
  */ 
#ifdef __cplusplus
}
#endif

#endif /* __USBD_CONF__H__ */

/**
  * @}
  */ 

/**
  * @}
  */ 
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/