MCU driver/HAL for the Picocell Gateway concentrator board. The firmware implements either a USB CDC protocol or a UART protocol to bridge commands coming from host to the SX1308 SPI interface.

Revision:
0:c76361bd82e8
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/usbd_ctlreq.h	Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,113 @@
+/**
+  ******************************************************************************
+  * @file    usbd_req.h
+  * @author  MCD Application Team
+  * @version V2.4.2
+  * @date    11-December-2015
+  * @brief   Header file for the usbd_req.c file
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_REQUEST_H
+#define __USB_REQUEST_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include  "usbd_def.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+  * @{
+  */
+  
+/** @defgroup USBD_REQ
+  * @brief header file for the usbd_req.c file
+  * @{
+  */ 
+
+/** @defgroup USBD_REQ_Exported_Defines
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup USBD_REQ_Exported_Types
+  * @{
+  */
+/**
+  * @}
+  */ 
+
+
+
+/** @defgroup USBD_REQ_Exported_Macros
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+/** @defgroup USBD_REQ_Exported_Variables
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+/** @defgroup USBD_REQ_Exported_FunctionsPrototype
+  * @{
+  */ 
+
+USBD_StatusTypeDef  USBD_StdDevReq (USBD_HandleTypeDef  *pdev, USBD_SetupReqTypedef  *req);
+USBD_StatusTypeDef  USBD_StdItfReq (USBD_HandleTypeDef  *pdev, USBD_SetupReqTypedef  *req);
+USBD_StatusTypeDef  USBD_StdEPReq  (USBD_HandleTypeDef  *pdev, USBD_SetupReqTypedef  *req);
+
+
+void USBD_CtlError  (USBD_HandleTypeDef  *pdev, USBD_SetupReqTypedef *req);
+
+void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata);
+
+void USBD_GetString         (uint8_t *desc, uint8_t *unicode, uint16_t *len);
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_REQUEST_H */
+
+/**
+  * @}
+  */ 
+
+/**
+* @}
+*/ 
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/