David Fletcher
TI's CC3100 host driver and demo. Experimental and a work in progress.
simplelink/cc3100_driver.cpp
- Committer:
- dflet
- Date:
- 2014-11-19
- Revision:
- 2:a3e52cf86086
- Parent:
- 0:bbe98578d4c0
File content as of revision 2:a3e52cf86086:
/*
* driver.c - CC31xx/CC32xx Host Driver Implementation
*
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/*****************************************************************************/
/* Include files */
/*****************************************************************************/
#include "cc3100_simplelink.h"
//#include "cc3100_protocol.h"
#include "cc3100_driver.h"
#include "cc3100_flowcont.h"
#include "cc3100_sl_common.h"//added
/*****************************************************************************/
/* Macro declarations */
/*****************************************************************************/
#define _SL_PENDING_RX_MSG(pDriverCB) ((pDriverCB)->RxIrqCnt != (pDriverCB)->RxDoneCnt)
/* 2 LSB of the N2H_SYNC_PATTERN are for sequence number
only in SPI interface
support backward sync pattern */
#define N2H_SYNC_PATTERN_SEQ_NUM_BITS ((_u32)0x00000003) /* Bits 0..1 - use the 2 LBS for seq num */
#define N2H_SYNC_PATTERN_SEQ_NUM_EXISTS ((_u32)0x00000004) /* Bit 2 - sign that sequence number exists in the sync pattern */
#define N2H_SYNC_PATTERN_MASK ((_u32)0xFFFFFFF8) /* Bits 3..31 - constant SYNC PATTERN */
#define N2H_SYNC_SPI_BUGS_MASK ((_u32)0x7FFF7F7F) /* Bits 7,15,31 - ignore the SPI (8,16,32 bites bus) error bits */
#define BUF_SYNC_SPIM(pBuf) ((*(_u32 *)(pBuf)) & N2H_SYNC_SPI_BUGS_MASK)
#define N2H_SYNC_SPIM (N2H_SYNC_PATTERN & N2H_SYNC_SPI_BUGS_MASK)
#define N2H_SYNC_SPIM_WITH_SEQ(TxSeqNum) ((N2H_SYNC_SPIM & N2H_SYNC_PATTERN_MASK) | N2H_SYNC_PATTERN_SEQ_NUM_EXISTS | ((TxSeqNum) & (N2H_SYNC_PATTERN_SEQ_NUM_BITS)))
#define MATCH_WOUT_SEQ_NUM(pBuf) ( BUF_SYNC_SPIM(pBuf) == N2H_SYNC_SPIM )
#define MATCH_WITH_SEQ_NUM(pBuf, TxSeqNum) ( BUF_SYNC_SPIM(pBuf) == (N2H_SYNC_SPIM_WITH_SEQ(TxSeqNum)) )
#define N2H_SYNC_PATTERN_MATCH(pBuf, TxSeqNum) \
( \
( (*((_u32 *)pBuf) & N2H_SYNC_PATTERN_SEQ_NUM_EXISTS) && ( MATCH_WITH_SEQ_NUM(pBuf, TxSeqNum) ) ) || \
( !(*((_u32 *)pBuf) & N2H_SYNC_PATTERN_SEQ_NUM_EXISTS) && ( MATCH_WOUT_SEQ_NUM(pBuf ) ) ) \
)
#define OPCODE(_ptr) (((_SlResponseHeader_t *)(_ptr))->GenHeader.Opcode)
#define RSP_PAYLOAD_LEN(_ptr) (((_SlResponseHeader_t *)(_ptr))->GenHeader.Len - _SL_RESP_SPEC_HDR_SIZE)
#define SD(_ptr) (((_SocketAddrResponse_u *)(_ptr))->IpV4.sd)
/* Actual size of Recv/Recvfrom response data */
#define ACT_DATA_SIZE(_ptr) (((_SocketAddrResponse_u *)(_ptr))->IpV4.statusOrLen)
#if (SL_MEMORY_MGMT == SL_MEMORY_MGMT_STATIC)
typedef struct
{
_u32 Align;
_SlDriverCb_t DriverCB;
_u8 AsyncRespBuf[SL_ASYNC_MAX_MSG_LEN];
}_SlStatMem_t;
_SlStatMem_t g_StatMem;
#endif
/*****************************************************************************/
/* Variables */
/*****************************************************************************/
//Vars taken from main
extern _u32 g_Status = 0;
extern _u32 g_GatewayIP = 0;
extern _u32 g_StationIP = 0;
const _SlSyncPattern_t g_H2NSyncPattern = H2N_SYNC_PATTERN;
const _SlSyncPattern_t g_H2NCnysPattern = H2N_CNYS_PATTERN;
const _SlActionLookup_t _SlActionLookupTable[7] =
{
{ACCEPT_ID, SL_OPCODE_SOCKET_ACCEPTASYNCRESPONSE, (_SlSpawnEntryFunc_t)_sl_HandleAsync_Accept},
{CONNECT_ID, SL_OPCODE_SOCKET_CONNECTASYNCRESPONSE,(_SlSpawnEntryFunc_t)_sl_HandleAsync_Connect},
{SELECT_ID, SL_OPCODE_SOCKET_SELECTASYNCRESPONSE,(_SlSpawnEntryFunc_t)_sl_HandleAsync_Select},
{GETHOSYBYNAME_ID, SL_OPCODE_NETAPP_DNSGETHOSTBYNAMEASYNCRESPONSE,(_SlSpawnEntryFunc_t)_sl_HandleAsync_DnsGetHostByName},
{GETHOSYBYSERVICE_ID, SL_OPCODE_NETAPP_MDNSGETHOSTBYSERVICEASYNCRESPONSE,(_SlSpawnEntryFunc_t)_sl_HandleAsync_DnsGetHostByService},
{PING_ID, SL_OPCODE_NETAPP_PINGREPORTREQUESTRESPONSE, (_SlSpawnEntryFunc_t)_sl_HandleAsync_PingResponse},
{START_STOP_ID, SL_OPCODE_DEVICE_STOP_ASYNC_RESPONSE,(_SlSpawnEntryFunc_t)_sl_HandleAsync_Stop}
};
_SlDriverCb_t* g_pCB = NULL;
P_SL_DEV_PING_CALLBACK pPingCallBackFunc = NULL;
_u8 gFirstCmdMode = 0;
/*****************************************************************************/
/* Function prototypes */
/*****************************************************************************/
_SlReturnVal_t _SlDrvMsgRead(void);
_SlReturnVal_t _SlDrvMsgWrite(void);
_SlReturnVal_t _SlDrvMsgReadCmdCtx(void);
_SlReturnVal_t _SlDrvMsgReadSpawnCtx(void *pValue);
void _SlDrvClassifyRxMsg(_SlOpcode_t Opcode );
_SlReturnVal_t _SlDrvRxHdrRead(_u8 *pBuf, _u8 *pAlignSize);
void _SlDrvShiftDWord(_u8 *pBuf);
void _SlDrvDriverCBInit(void);
void _SlAsyncEventGenericHandler(void);
_i16 _SlDrvWaitForPoolObj(_u32 ActionID, _u8 SocketID);
void _SlDrvReleasePoolObj(_u8 pObj);
void _SlDrvObjInit(void);
void _SlDrvObjDeInit(void);
void _SlRemoveFromList(_u8* ListIndex, _u8 ItemIndex);
_SlReturnVal_t _SlFindAndSetActiveObj(_SlOpcode_t Opcode, _u8 Sd);
/*****************************************************************************/
/* Internal functions */
/*****************************************************************************/
/*****************************************************************************
_SlDrvDriverCBInit - init Driver Control Block
*****************************************************************************/
void _SlDrvDriverCBInit(void)
{
_u8 Idx;
#if (SL_MEMORY_MGMT == SL_MEMORY_MGMT_STATIC)
g_pCB = &(g_StatMem.DriverCB);
#else
g_pCB = sl_Malloc(sizeof(_SlDriverCb_t));
#endif
MALLOC_OK_CHECK(g_pCB);
sl_Memset((g_pCB), 0, sizeof(_SlDriverCb_t));
OSI_RET_OK_CHECK( sl_SyncObjCreate(&g_pCB->CmdSyncObj, "CmdSyncObj") );
sl_SyncObjClear(&g_pCB->CmdSyncObj);
OSI_RET_OK_CHECK( sl_LockObjCreate(&g_pCB->GlobalLockObj, "GlobalLockObj") );
OSI_RET_OK_CHECK( sl_LockObjCreate(&g_pCB->ProtectionLockObj, "ProtectionLockObj") );
_SlDrvObjInit();
for (Idx = 0; Idx < MAX_CONCURRENT_ACTIONS; Idx++)
{
OSI_RET_OK_CHECK( sl_SyncObjCreate(&g_pCB->ObjPool[Idx].SyncObj, "SyncObj") );
sl_SyncObjClear(&g_pCB->ObjPool[Idx].SyncObj);
}
_SlDrvFlowContInit();
gFirstCmdMode = 0;
}
/*****************************************************************************
_SlDrvDriverCBDeinit - De init Driver Control Block
*****************************************************************************/
void _SlDrvDriverCBDeinit()
{
_u8 Idx;
_SlDrvFlowContDeinit();
OSI_RET_OK_CHECK( sl_SyncObjDelete(&g_pCB->CmdSyncObj) );
OSI_RET_OK_CHECK( sl_LockObjDelete(&g_pCB->GlobalLockObj) );
OSI_RET_OK_CHECK( sl_LockObjDelete(&g_pCB->ProtectionLockObj) );
for (Idx = 0; Idx < MAX_CONCURRENT_ACTIONS; Idx++)
{
OSI_RET_OK_CHECK( sl_SyncObjDelete(&g_pCB->ObjPool[Idx].SyncObj) );
}
_SlDrvObjDeInit();
#if (SL_MEMORY_MGMT == SL_MEMORY_MGMT_STATIC)
g_pCB = NULL;
#else
sl_Free(g_pCB);
#endif
g_pCB = NULL;
}
/*****************************************************************************
_SlDrvRxIrqHandler - Interrupt handler
*****************************************************************************/
void _SlDrvRxIrqHandler(void *pValue)
{
sl_IfMaskIntHdlr();
g_pCB->RxIrqCnt++;
if (TRUE == g_pCB->IsCmdRespWaited)
{
OSI_RET_OK_CHECK( sl_SyncObjSignalFromIRQ(&g_pCB->CmdSyncObj) );
}
else
{
sl_Spawn((_SlSpawnEntryFunc_t)_SlDrvMsgReadSpawnCtx, NULL, 0);
}
}
/*****************************************************************************
_SlDrvCmdOp
*****************************************************************************/
_SlReturnVal_t _SlDrvCmdOp(
_SlCmdCtrl_t *pCmdCtrl ,
void *pTxRxDescBuff ,
_SlCmdExt_t *pCmdExt)
{
_SlReturnVal_t RetVal;
OSI_RET_OK_CHECK(sl_LockObjLock(&g_pCB->GlobalLockObj, SL_OS_WAIT_FOREVER));
g_pCB->IsCmdRespWaited = TRUE;
SL_TRACE0(DBG_MSG, MSG_312, "_SlDrvCmdOp: call _SlDrvMsgWrite");
/* send the message */
g_pCB->FunctionParams.pCmdCtrl = pCmdCtrl;
g_pCB->FunctionParams.pTxRxDescBuff = (unsigned char*)pTxRxDescBuff;//(unsigned char*) added
g_pCB->FunctionParams.pCmdExt = pCmdExt;
RetVal = _SlDrvMsgWrite();
if(SL_OS_RET_CODE_OK == RetVal)
{
#ifndef SL_IF_TYPE_UART
/* Waiting for SPI to stabilize after first command */
if( 0 == gFirstCmdMode )
{
volatile _u32 CountVal = 0;
gFirstCmdMode = 1;
CountVal = CPU_FREQ_IN_MHZ*USEC_DELAY;
while( CountVal-- );
}
#endif
/* wait for respond */
RetVal = _SlDrvMsgReadCmdCtx(); /* will free global lock */
SL_TRACE0(DBG_MSG, MSG_314, "_SlDrvCmdOp: exited _SlDrvMsgReadCmdCtx");
}
else
{
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->GlobalLockObj));
}
return RetVal;
}
/*****************************************************************************
_SlDrvCmdSend
Send SL command without waiting for command response
This function is unprotected and the caller should make
sure global lock is active
*****************************************************************************/
_SlReturnVal_t _SlDrvCmdSend(
_SlCmdCtrl_t *pCmdCtrl ,
void *pTxRxDescBuff ,
_SlCmdExt_t *pCmdExt)
{
_SlReturnVal_t RetVal;
g_pCB->IsCmdRespWaited = FALSE;
SL_TRACE0(DBG_MSG, MSG_312, "_SlDrvCmdSend: call _SlDrvMsgWrite");
/* send the message */
g_pCB->FunctionParams.pCmdCtrl = pCmdCtrl;
g_pCB->FunctionParams.pTxRxDescBuff = (unsigned char*)pTxRxDescBuff;//(unsigned char*) added
g_pCB->FunctionParams.pCmdExt = pCmdExt;
RetVal = _SlDrvMsgWrite();
return RetVal;
}
/*****************************************************************************
_SlDrvDataReadOp
*****************************************************************************/
_SlReturnVal_t _SlDrvDataReadOp(
_SlSd_t Sd,
_SlCmdCtrl_t *pCmdCtrl ,
void *pTxRxDescBuff ,
_SlCmdExt_t *pCmdExt)
{
_SlReturnVal_t RetVal;
_u8 ObjIdx = MAX_CONCURRENT_ACTIONS;
_SlArgsData_t pArgsData;
/* Validate input arguments */
VERIFY_PROTOCOL(NULL != pCmdExt->pRxPayload);
/* If zero bytes is requested, return error. */
/* This allows us not to fill remote socket's IP address in return arguments */
VERIFY_PROTOCOL(0 != pCmdExt->RxPayloadLen);
/* Validate socket */
if((Sd & BSD_SOCKET_ID_MASK) >= SL_MAX_SOCKETS)
{
return SL_EBADF;
}
/*Use Obj to issue the command, if not available try later*/
ObjIdx = (_u8)_SlDrvWaitForPoolObj(RECV_ID, Sd & BSD_SOCKET_ID_MASK);
if (MAX_CONCURRENT_ACTIONS == ObjIdx)
{
return SL_POOL_IS_EMPTY;
}
OSI_RET_OK_CHECK(sl_LockObjLock(&g_pCB->ProtectionLockObj, SL_OS_WAIT_FOREVER));
pArgsData.pData = pCmdExt->pRxPayload;
pArgsData.pArgs = (_u8 *)pTxRxDescBuff;
g_pCB->ObjPool[ObjIdx].pRespArgs = (_u8 *)&pArgsData;
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->ProtectionLockObj));
/* Do Flow Control check/update for DataWrite operation */
OSI_RET_OK_CHECK( sl_LockObjLock(&g_pCB->FlowContCB.TxLockObj, SL_OS_WAIT_FOREVER) );
/* Clear SyncObj for the case it was signalled before TxPoolCnt */
/* dropped below '1' (last Data buffer was taken) */
/* OSI_RET_OK_CHECK( sl_SyncObjClear(&g_pCB->FlowContCB.TxSyncObj) ); */
sl_SyncObjClear(&g_pCB->FlowContCB.TxSyncObj);
if(g_pCB->FlowContCB.TxPoolCnt <= FLOW_CONT_MIN)
{
/* If TxPoolCnt was increased by other thread at this moment,
TxSyncObj won't wait here */
OSI_RET_OK_CHECK( sl_SyncObjWait(&g_pCB->FlowContCB.TxSyncObj, SL_OS_WAIT_FOREVER) );
}
OSI_RET_OK_CHECK(sl_LockObjLock(&g_pCB->GlobalLockObj, SL_OS_WAIT_FOREVER));
VERIFY_PROTOCOL(g_pCB->FlowContCB.TxPoolCnt > FLOW_CONT_MIN);
g_pCB->FlowContCB.TxPoolCnt--;
OSI_RET_OK_CHECK( sl_LockObjUnlock(&g_pCB->FlowContCB.TxLockObj) );
/* send the message */
g_pCB->TempProtocolHeader.Opcode = pCmdCtrl->Opcode;
g_pCB->TempProtocolHeader.Len = _SL_PROTOCOL_CALC_LEN(pCmdCtrl,pCmdExt);
g_pCB->FunctionParams.pCmdCtrl = pCmdCtrl;
g_pCB->FunctionParams.pTxRxDescBuff = (_u8 *)pTxRxDescBuff;
g_pCB->FunctionParams.pCmdExt = pCmdExt;
RetVal = _SlDrvMsgWrite();
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->GlobalLockObj));
if(SL_OS_RET_CODE_OK == RetVal)
{
/* Wait for response message. Will be signalled by _SlDrvMsgRead. */
OSI_RET_OK_CHECK(sl_SyncObjWait(&g_pCB->ObjPool[ObjIdx].SyncObj, SL_OS_WAIT_FOREVER));
}
_SlDrvReleasePoolObj(ObjIdx);
return RetVal;
}
/* ******************************************************************************/
/* _SlDrvDataWriteOp */
/* ******************************************************************************/
_SlReturnVal_t _SlDrvDataWriteOp(
_SlSd_t Sd,
_SlCmdCtrl_t *pCmdCtrl ,
void *pTxRxDescBuff ,
_SlCmdExt_t *pCmdExt)
{
_SlReturnVal_t RetVal = SL_EAGAIN; /* initiated as SL_EAGAIN for the non blocking mode */
while( 1 )
{
/* Do Flow Control check/update for DataWrite operation */
OSI_RET_OK_CHECK( sl_LockObjLock(&g_pCB->FlowContCB.TxLockObj, SL_OS_WAIT_FOREVER) );
/* Clear SyncObj for the case it was signalled before TxPoolCnt */
/* dropped below '1' (last Data buffer was taken) */
/* OSI_RET_OK_CHECK( sl_SyncObjClear(&g_pCB->FlowContCB.TxSyncObj) ); */
sl_SyncObjClear(&g_pCB->FlowContCB.TxSyncObj);
/* we have indication that the last send has failed - socket is no longer valid for operations */
if(g_pCB->SocketTXFailure & (1<<(Sd & BSD_SOCKET_ID_MASK)))
{
OSI_RET_OK_CHECK( sl_LockObjUnlock(&g_pCB->FlowContCB.TxLockObj) );
return SL_SOC_ERROR;
}
if(g_pCB->FlowContCB.TxPoolCnt <= FLOW_CONT_MIN + 1)
{
/* we have indication that this socket is set as blocking and we try to */
/* unblock it - return an error */
if( g_pCB->SocketNonBlocking >> (Sd & BSD_SOCKET_ID_MASK) )
{
OSI_RET_OK_CHECK( sl_LockObjUnlock(&g_pCB->FlowContCB.TxLockObj) );
return RetVal;
}
/* If TxPoolCnt was increased by other thread at this moment, */
/* TxSyncObj won't wait here */
OSI_RET_OK_CHECK( sl_SyncObjWait(&g_pCB->FlowContCB.TxSyncObj, SL_OS_WAIT_FOREVER) );
}
if(g_pCB->FlowContCB.TxPoolCnt > FLOW_CONT_MIN + 1 )
{
break;
}
else
{
OSI_RET_OK_CHECK( sl_LockObjUnlock(&g_pCB->FlowContCB.TxLockObj) );
}
}
OSI_RET_OK_CHECK( sl_LockObjLock(&g_pCB->GlobalLockObj, SL_OS_WAIT_FOREVER) );
VERIFY_PROTOCOL(g_pCB->FlowContCB.TxPoolCnt > FLOW_CONT_MIN + 1 );
g_pCB->FlowContCB.TxPoolCnt--;
OSI_RET_OK_CHECK( sl_LockObjUnlock(&g_pCB->FlowContCB.TxLockObj) );
/* send the message */
g_pCB->TempProtocolHeader.Opcode = pCmdCtrl->Opcode;
g_pCB->TempProtocolHeader.Len = _SL_PROTOCOL_CALC_LEN(pCmdCtrl,pCmdExt);
g_pCB->FunctionParams.pCmdCtrl = pCmdCtrl;
g_pCB->FunctionParams.pTxRxDescBuff = (unsigned char*)pTxRxDescBuff;//(unsigned char*) added
g_pCB->FunctionParams.pCmdExt = pCmdExt;
RetVal = _SlDrvMsgWrite();
OSI_RET_OK_CHECK( sl_LockObjUnlock(&g_pCB->GlobalLockObj) );
return RetVal;
}
/* ******************************************************************************/
/* _SlDrvMsgWrite */
/* ******************************************************************************/
_SlReturnVal_t _SlDrvMsgWrite(void)
{
VERIFY_PROTOCOL(NULL != g_pCB->FunctionParams.pCmdCtrl);
g_pCB->TempProtocolHeader.Opcode = g_pCB->FunctionParams.pCmdCtrl->Opcode;
g_pCB->TempProtocolHeader.Len = _SL_PROTOCOL_CALC_LEN(g_pCB->FunctionParams.pCmdCtrl,
g_pCB->FunctionParams.pCmdExt);
/* */
if (g_pCB->RelayFlagsViaRxPayload == TRUE)
{
g_pCB->TempProtocolHeader.Len = g_pCB->TempProtocolHeader.Len + g_pCB->FunctionParams.pCmdExt->RxPayloadLen;
}
#ifdef SL_START_WRITE_STAT
sl_IfStartWriteSequence(g_pCB->FD);
#endif
#ifdef SL_IF_TYPE_UART
/* Write long sync pattern */
NWP_IF_WRITE_CHECK(g_pCB->FD, (_u8 *)&g_H2NSyncPattern.Long, 2*SYNC_PATTERN_LEN);
#else
/* Write short sync pattern */
NWP_IF_WRITE_CHECK(g_pCB->FD, (_u8 *)&g_H2NSyncPattern.Short, SYNC_PATTERN_LEN);
#endif
/* Header */
NWP_IF_WRITE_CHECK(g_pCB->FD, (_u8 *)&g_pCB->TempProtocolHeader, _SL_CMD_HDR_SIZE);
/* Descriptors */
if (g_pCB->FunctionParams.pTxRxDescBuff && g_pCB->FunctionParams.pCmdCtrl->TxDescLen > 0)
{
NWP_IF_WRITE_CHECK(g_pCB->FD, g_pCB->FunctionParams.pTxRxDescBuff,
_SL_PROTOCOL_ALIGN_SIZE(g_pCB->FunctionParams.pCmdCtrl->TxDescLen));
}
/* A special mode where Rx payload and Rx length are used as Tx as well */
/* This mode requires no Rx payload on the response and currently used by fs_Close and sl_Send on */
/* transceiver mode */
if (g_pCB->RelayFlagsViaRxPayload == TRUE )
{
g_pCB->RelayFlagsViaRxPayload = FALSE;
NWP_IF_WRITE_CHECK(g_pCB->FD, g_pCB->FunctionParams.pCmdExt->pRxPayload,
_SL_PROTOCOL_ALIGN_SIZE(g_pCB->FunctionParams.pCmdExt->RxPayloadLen));
}
/* Payload */
if (g_pCB->FunctionParams.pCmdExt && g_pCB->FunctionParams.pCmdExt->TxPayloadLen > 0)
{
/* If the message has payload, it is mandatory that the message's arguments are protocol aligned. */
/* Otherwise the aligning of arguments will create a gap between arguments and payload. */
VERIFY_PROTOCOL(_SL_IS_PROTOCOL_ALIGNED_SIZE(g_pCB->FunctionParams.pCmdCtrl->TxDescLen));
NWP_IF_WRITE_CHECK(g_pCB->FD, g_pCB->FunctionParams.pCmdExt->pTxPayload,
_SL_PROTOCOL_ALIGN_SIZE(g_pCB->FunctionParams.pCmdExt->TxPayloadLen));
}
_SL_DBG_CNT_INC(MsgCnt.Write);
#ifdef SL_START_WRITE_STAT
sl_IfEndWriteSequence(g_pCB->FD);
#endif
return SL_OS_RET_CODE_OK;
}
/* ******************************************************************************/
/* _SlDrvMsgRead */
/* ******************************************************************************/
_SlReturnVal_t _SlDrvMsgRead(void)
{
/* alignment for small memory models */
union
{
_u8 TempBuf[_SL_RESP_HDR_SIZE];
_u32 DummyBuf[2];
} uBuf;
_u8 TailBuffer[4];
_u16 LengthToCopy;
_u16 AlignedLengthRecv;
_u8 AlignSize;
VERIFY_RET_OK(_SlDrvRxHdrRead((_u8*)(uBuf.TempBuf), &AlignSize));
/* 'Init Compelete' message bears no valid FlowControl info */
if(SL_OPCODE_DEVICE_INITCOMPLETE != OPCODE(uBuf.TempBuf))
{
g_pCB->FlowContCB.TxPoolCnt = ((_SlResponseHeader_t *)uBuf.TempBuf)->TxPoolCnt;
g_pCB->SocketNonBlocking = ((_SlResponseHeader_t *)uBuf.TempBuf)->SocketNonBlocking;
g_pCB->SocketTXFailure = ((_SlResponseHeader_t *)uBuf.TempBuf)->SocketTXFailure;
if(g_pCB->FlowContCB.TxPoolCnt > FLOW_CONT_MIN)
{
OSI_RET_OK_CHECK(sl_SyncObjSignal(&g_pCB->FlowContCB.TxSyncObj));
}
}
_SlDrvClassifyRxMsg(OPCODE(uBuf.TempBuf));
switch(g_pCB->FunctionParams.AsyncExt.RxMsgClass)
{
case ASYNC_EVT_CLASS:
VERIFY_PROTOCOL(NULL == g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
#if (SL_MEMORY_MGMT == SL_MEMORY_MGMT_STATIC)
g_pCB->FunctionParams.AsyncExt.pAsyncBuf = g_StatMem.AsyncRespBuf;
#else
g_pCB->FunctionParams.AsyncExt.pAsyncBuf = sl_Malloc(SL_ASYNC_MAX_MSG_LEN);
#endif
MALLOC_OK_CHECK(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
sl_Memcpy(g_pCB->FunctionParams.AsyncExt.pAsyncBuf, uBuf.TempBuf, _SL_RESP_HDR_SIZE);
/* This is an Async message. Read the rest of it. */
if (_SL_PROTOCOL_ALIGN_SIZE(RSP_PAYLOAD_LEN(uBuf.TempBuf)) <= SL_ASYNC_MAX_PAYLOAD_LEN)
{
AlignedLengthRecv = _SL_PROTOCOL_ALIGN_SIZE(RSP_PAYLOAD_LEN(uBuf.TempBuf));
}
else
{
AlignedLengthRecv = _SL_PROTOCOL_ALIGN_SIZE(SL_ASYNC_MAX_PAYLOAD_LEN);
}
if (RSP_PAYLOAD_LEN(uBuf.TempBuf) > 0)
{
NWP_IF_READ_CHECK(g_pCB->FD,
g_pCB->FunctionParams.AsyncExt.pAsyncBuf + _SL_RESP_HDR_SIZE,
AlignedLengthRecv);
}
/* In case ASYNC RX buffer length is smaller then the received data length, dump the rest */
if ((_SL_PROTOCOL_ALIGN_SIZE(RSP_PAYLOAD_LEN(uBuf.TempBuf)) > SL_ASYNC_MAX_PAYLOAD_LEN))
{
AlignedLengthRecv = _SL_PROTOCOL_ALIGN_SIZE(RSP_PAYLOAD_LEN(uBuf.TempBuf)) - SL_ASYNC_MAX_PAYLOAD_LEN;
while (AlignedLengthRecv > 0)
{
NWP_IF_READ_CHECK(g_pCB->FD,TailBuffer,4);
AlignedLengthRecv = AlignedLengthRecv - 4;
}
}
OSI_RET_OK_CHECK(sl_LockObjLock(&g_pCB->ProtectionLockObj, SL_OS_WAIT_FOREVER));
if ((SL_OPCODE_SOCKET_ACCEPTASYNCRESPONSE == OPCODE(uBuf.TempBuf)) || (SL_OPCODE_SOCKET_ACCEPTASYNCRESPONSE_V6 == OPCODE(uBuf.TempBuf)) || (SL_OPCODE_SOCKET_CONNECTASYNCRESPONSE == OPCODE(uBuf.TempBuf)))
{
/* go over the active list if exist to find obj waiting for this Async event */
_SlFindAndSetActiveObj(OPCODE(uBuf.TempBuf),(((_SocketResponse_t *)(g_pCB->FunctionParams.AsyncExt.pAsyncBuf + _SL_RESP_HDR_SIZE))->sd) & BSD_SOCKET_ID_MASK);
}
else
{
_SlFindAndSetActiveObj(OPCODE(uBuf.TempBuf),SL_MAX_SOCKETS);
}
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->ProtectionLockObj));
break;
case RECV_RESP_CLASS:
{
_u8 ExpArgSize; /* Expected size of Recv/Recvfrom arguments */
switch(OPCODE(uBuf.TempBuf))
{
case SL_OPCODE_SOCKET_RECVFROMASYNCRESPONSE:
ExpArgSize = RECVFROM_IPV4_ARGS_SIZE;
break;
case SL_OPCODE_SOCKET_RECVFROMASYNCRESPONSE_V6:
ExpArgSize = RECVFROM_IPV6_ARGS_SIZE;
break;
default:
/* SL_OPCODE_SOCKET_RECVASYNCRESPONSE: */
ExpArgSize = RECV_ARGS_SIZE;
}
/* Read first 4 bytes of Recv/Recvfrom response to get SocketId and actual */
/* response data length */
NWP_IF_READ_CHECK(g_pCB->FD, &uBuf.TempBuf[4], RECV_ARGS_SIZE);
/* Validate Socket ID and Received Length value. */
VERIFY_PROTOCOL((SD(&uBuf.TempBuf[4])& BSD_SOCKET_ID_MASK) < SL_MAX_SOCKETS);
OSI_RET_OK_CHECK(sl_LockObjLock(&g_pCB->ProtectionLockObj, SL_OS_WAIT_FOREVER));
/* go over the active list if exist to find obj waiting for this Async event */
VERIFY_RET_OK(_SlFindAndSetActiveObj(OPCODE(uBuf.TempBuf),SD(&uBuf.TempBuf[4]) & BSD_SOCKET_ID_MASK));
/* Verify data is waited on this socket. The pArgs should have been set by _SlDrvDataReadOp(). */
VERIFY_SOCKET_CB(NULL != ((_SlArgsData_t *)(g_pCB->ObjPool[g_pCB->FunctionParams.AsyncExt.ActionIndex].pData))->pArgs);
sl_Memcpy( ((_SlArgsData_t *)(g_pCB->ObjPool[g_pCB->FunctionParams.AsyncExt.ActionIndex].pRespArgs))->pArgs, &uBuf.TempBuf[4], RECV_ARGS_SIZE);
if(ExpArgSize > RECV_ARGS_SIZE)
{
NWP_IF_READ_CHECK(g_pCB->FD,
((_SlArgsData_t *)(g_pCB->ObjPool[g_pCB->FunctionParams.AsyncExt.ActionIndex].pRespArgs))->pArgs + RECV_ARGS_SIZE,
ExpArgSize - RECV_ARGS_SIZE);
}
/* Here g_pCB->ObjPool[g_pCB->FunctionParams.AsyncExt.ActionIndex].pData contains requested(expected) Recv/Recvfrom DataSize. */
/* Overwrite requested DataSize with actual one. */
/* If error is received, this information will be read from arguments. */
if(ACT_DATA_SIZE(&uBuf.TempBuf[4]) > 0)
{
VERIFY_SOCKET_CB(NULL != ((_SlArgsData_t *)(g_pCB->ObjPool[g_pCB->FunctionParams.AsyncExt.ActionIndex].pRespArgs))->pData);
/* Read 4 bytes aligned from interface */
/* therefore check the requested length and read only */
/* 4 bytes aligned data. The rest unaligned (if any) will be read */
/* and copied to a TailBuffer */
LengthToCopy = ACT_DATA_SIZE(&uBuf.TempBuf[4]) & (3);
AlignedLengthRecv = ACT_DATA_SIZE(&uBuf.TempBuf[4]) & (~3);
if( AlignedLengthRecv >= 4)
{
NWP_IF_READ_CHECK(g_pCB->FD,((_SlArgsData_t *)(g_pCB->ObjPool[g_pCB->FunctionParams.AsyncExt.ActionIndex].pRespArgs))->pData,AlignedLengthRecv );
}
/* copy the unaligned part, if any */
if( LengthToCopy > 0)
{
NWP_IF_READ_CHECK(g_pCB->FD,TailBuffer,4);
/* copy TailBuffer unaligned part (1/2/3 bytes) */
sl_Memcpy(((_SlArgsData_t *)(g_pCB->ObjPool[g_pCB->FunctionParams.AsyncExt.ActionIndex].pRespArgs))->pData + AlignedLengthRecv,TailBuffer,LengthToCopy);
}
}
OSI_RET_OK_CHECK(sl_SyncObjSignal(&(g_pCB->ObjPool[g_pCB->FunctionParams.AsyncExt.ActionIndex].SyncObj)));
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->ProtectionLockObj));
}
break;
case CMD_RESP_CLASS:
/* Some commands pass a maximum arguments size. */
/* In this case Driver will send extra dummy patterns to NWP if */
/* the response message is smaller than maximum. */
/* When RxDescLen is not exact, using RxPayloadLen is forbidden! */
/* If such case cannot be avoided - parse message here to detect */
/* arguments/payload border. */
NWP_IF_READ_CHECK(g_pCB->FD,
g_pCB->FunctionParams.pTxRxDescBuff,
_SL_PROTOCOL_ALIGN_SIZE(g_pCB->FunctionParams.pCmdCtrl->RxDescLen));
if((NULL != g_pCB->FunctionParams.pCmdExt) && (0 != g_pCB->FunctionParams.pCmdExt->RxPayloadLen))
{
/* Actual size of command's response payload: <msg_payload_len> - <rsp_args_len> */
_i16 ActDataSize = RSP_PAYLOAD_LEN(uBuf.TempBuf) - g_pCB->FunctionParams.pCmdCtrl->RxDescLen;
g_pCB->FunctionParams.pCmdExt->ActualRxPayloadLen = ActDataSize;
/* Check that the space prepared by user for the response data is sufficient. */
if(ActDataSize <= 0)
{
g_pCB->FunctionParams.pCmdExt->RxPayloadLen = 0;
}
else
{
/* In case the user supplied Rx buffer length which is smaller then the received data length, copy according to user length */
if (ActDataSize > g_pCB->FunctionParams.pCmdExt->RxPayloadLen)
{
LengthToCopy = g_pCB->FunctionParams.pCmdExt->RxPayloadLen & (3);
AlignedLengthRecv = g_pCB->FunctionParams.pCmdExt->RxPayloadLen & (~3);
}
else
{
LengthToCopy = ActDataSize & (3);
AlignedLengthRecv = ActDataSize & (~3);
}
/* Read 4 bytes aligned from interface */
/* therefore check the requested length and read only */
/* 4 bytes aligned data. The rest unaligned (if any) will be read */
/* and copied to a TailBuffer */
if( AlignedLengthRecv >= 4)
{
NWP_IF_READ_CHECK(g_pCB->FD,
g_pCB->FunctionParams.pCmdExt->pRxPayload,
AlignedLengthRecv );
}
/* copy the unaligned part, if any */
if( LengthToCopy > 0)
{
NWP_IF_READ_CHECK(g_pCB->FD,TailBuffer,4);
/* copy TailBuffer unaligned part (1/2/3 bytes) */
sl_Memcpy(g_pCB->FunctionParams.pCmdExt->pRxPayload + AlignedLengthRecv,
TailBuffer,
LengthToCopy);
ActDataSize = ActDataSize-4;
}
/* In case the user supplied Rx buffer length which is smaller then the received data length, dump the rest */
if (ActDataSize > g_pCB->FunctionParams.pCmdExt->RxPayloadLen)
{
/* calculate the rest of the data size to dump */
AlignedLengthRecv = ActDataSize - (g_pCB->FunctionParams.pCmdExt->RxPayloadLen & (~3));
while( AlignedLengthRecv > 0)
{
NWP_IF_READ_CHECK(g_pCB->FD,TailBuffer, 4 );
AlignedLengthRecv = AlignedLengthRecv - 4;
}
}
}
}
break;
default:
/* DUMMY_MSG_CLASS: Flow control message has no payload. */
break;
}
if(AlignSize > 0)
{
NWP_IF_READ_CHECK(g_pCB->FD, uBuf.TempBuf, AlignSize);
}
_SL_DBG_CNT_INC(MsgCnt.Read);
/* Unmask Interrupt call */
sl_IfUnMaskIntHdlr();
return SL_OS_RET_CODE_OK;
}
/* ******************************************************************************/
/* _SlAsyncEventGenericHandler */
/* ******************************************************************************/
void _SlAsyncEventGenericHandler(void)
{
_SlResponseHeader_t *pHdr = (_SlResponseHeader_t *)g_pCB->FunctionParams.AsyncExt.pAsyncBuf;
SlWlanEvent_t wlanEvent;
SlNetAppEvent_t netAppEvent;
SlSockEvent_t sockAppEvent;
if (NULL != g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler)
{
switch(pHdr->GenHeader.Opcode)
{
case SL_OPCODE_WLAN_P2P_DEV_FOUND:
{
slPeerInfoAsyncResponse_t* pResp = (slPeerInfoAsyncResponse_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
wlanEvent.Event = SL_WLAN_P2P_DEV_FOUND_EVENT;
sl_Memcpy(wlanEvent.EventData.P2PModeDevFound.mac,pResp->mac, 6);
sl_Memcpy(wlanEvent.EventData.P2PModeDevFound.go_peer_device_name,pResp->go_peer_device_name,pResp->go_peer_device_name_len);
wlanEvent.EventData.P2PModeDevFound.go_peer_device_name_len = pResp->go_peer_device_name_len;
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&wlanEvent);
break;
}
case SL_OPCODE_WLAN_P2P_NEG_REQ_RECEIVED:
{
slPeerInfoAsyncResponse_t* pResp = (slPeerInfoAsyncResponse_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
wlanEvent.Event = SL_WLAN_P2P_NEG_REQ_RECEIVED_EVENT;
sl_Memcpy(wlanEvent.EventData.P2PModeNegReqReceived.mac,pResp->mac, 6);
sl_Memcpy(wlanEvent.EventData.P2PModeNegReqReceived.go_peer_device_name,pResp->go_peer_device_name,pResp->go_peer_device_name_len);
wlanEvent.EventData.P2PModeNegReqReceived.go_peer_device_name_len = pResp->go_peer_device_name_len;
wlanEvent.EventData.P2PModeNegReqReceived.wps_dev_password_id = pResp->wps_dev_password_id;
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&wlanEvent);
break;
}
case SL_OPCODE_WLAN_CONNECTION_FAILED:
{
slWlanConnFailureAsyncResponse_t * pResp = (slWlanConnFailureAsyncResponse_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
wlanEvent.Event = SL_WLAN_CONNECTION_FAILED_EVENT;
wlanEvent.EventData.P2PModewlanConnectionFailure.status = pResp->status;
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&wlanEvent);
break;
}
case SL_OPCODE_WLAN_WLANASYNCCONNECTEDRESPONSE:
{
slWlanConnectAsyncResponse_t *pWlanResp = (slWlanConnectAsyncResponse_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
sl_Memset(&wlanEvent.EventData.STAandP2PModeWlanConnected,0,sizeof(slWlanConnectAsyncResponse_t));
wlanEvent.Event = SL_WLAN_CONNECT_EVENT;
wlanEvent.EventData.STAandP2PModeWlanConnected.connection_type = pWlanResp->connection_type;
sl_Memcpy(wlanEvent.EventData.STAandP2PModeWlanConnected.bssid, pWlanResp->bssid, 6);
sl_Memcpy(wlanEvent.EventData.STAandP2PModeWlanConnected.go_peer_device_name,pWlanResp->go_peer_device_name,pWlanResp->go_peer_device_name_len);
sl_Memcpy(wlanEvent.EventData.STAandP2PModeWlanConnected.ssid_name, pWlanResp->ssid_name, pWlanResp->ssid_len);
wlanEvent.EventData.STAandP2PModeWlanConnected.ssid_len = pWlanResp->ssid_len;
wlanEvent.EventData.STAandP2PModeWlanConnected.go_peer_device_name_len = pWlanResp->go_peer_device_name_len;
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&wlanEvent);
break;
}
case SL_OPCODE_WLAN_WLANASYNCDISCONNECTEDRESPONSE:
{
slWlanConnectAsyncResponse_t *pWlanResp = (slWlanConnectAsyncResponse_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
sl_Memset(&wlanEvent.EventData.STAandP2PModeDisconnected,0,sizeof(slWlanConnectAsyncResponse_t));
wlanEvent.Event = SL_WLAN_DISCONNECT_EVENT;
wlanEvent.EventData.STAandP2PModeDisconnected.connection_type = pWlanResp->connection_type;
sl_Memcpy(wlanEvent.EventData.STAandP2PModeDisconnected.bssid, pWlanResp->bssid, 6);
sl_Memcpy(wlanEvent.EventData.STAandP2PModeDisconnected.go_peer_device_name,pWlanResp->go_peer_device_name,pWlanResp->go_peer_device_name_len);
sl_Memcpy(wlanEvent.EventData.STAandP2PModeDisconnected.ssid_name, pWlanResp->ssid_name, pWlanResp->ssid_len);
wlanEvent.EventData.STAandP2PModeDisconnected.ssid_len = pWlanResp->ssid_len;
wlanEvent.EventData.STAandP2PModeDisconnected.reason_code = pWlanResp->reason_code;
wlanEvent.EventData.STAandP2PModeDisconnected.go_peer_device_name_len = pWlanResp->go_peer_device_name_len;
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&wlanEvent);
break;
}
case SL_OPCODE_NETAPP_IPACQUIRED:
{
SlIpV4AcquiredAsync_t *pIpV4 = (SlIpV4AcquiredAsync_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
netAppEvent.Event = SL_NETAPP_IPV4_IPACQUIRED_EVENT;
netAppEvent.EventData.ipAcquiredV4.ip = pIpV4->ip;
netAppEvent.EventData.ipAcquiredV4.gateway = pIpV4->gateway;
netAppEvent.EventData.ipAcquiredV4.dns = pIpV4->dns;
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&netAppEvent);
}
break;
case SL_OPCODE_NETAPP_IPACQUIRED_V6:
{
SlIpV6AcquiredAsync_t *pIpV6 = (SlIpV6AcquiredAsync_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
netAppEvent.Event = SL_NETAPP_IPV6_IPACQUIRED_EVENT;
sl_Memcpy((void *)&netAppEvent.EventData.ipAcquiredV6.ip[0],(void *)&pIpV6->ip[0],sizeof(pIpV6->ip[0])*4);
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&netAppEvent);
}
break;
case SL_OPCODE_NETAPP_IP_LEASED:
{
SlIpLeasedAsync_t *pIpV4 = (SlIpLeasedAsync_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
netAppEvent.Event = SL_NETAPP_IP_LEASED_EVENT;
netAppEvent.EventData.ipLeased.ip_address = pIpV4->ip_address;
netAppEvent.EventData.ipLeased.lease_time = pIpV4->lease_time;
sl_Memcpy(netAppEvent.EventData.ipLeased.mac, pIpV4->mac, 6);
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&netAppEvent);
}
break;
case SL_OPCODE_NETAPP_IP_RELEASED:
{
SlIpReleasedAsync_t *pIpV4 = (SlIpReleasedAsync_t *)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
netAppEvent.Event = SL_NETAPP_IP_RELEASED_EVENT;
netAppEvent.EventData.ipReleased.ip_address = pIpV4->ip_address;
netAppEvent.EventData.ipReleased.reason = pIpV4->reason;
sl_Memcpy(netAppEvent.EventData.ipReleased.mac, pIpV4->mac, 6);
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&netAppEvent);
}
break;
case SL_OPCODE_SOCKET_TXFAILEDASYNCRESPONSE:
{
SlSockEventData_t *txfailparams = (SlSockEventData_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
sockAppEvent.Event = SL_SOCKET_TX_FAILED_EVENT;
sl_Memcpy((void *)&sockAppEvent.EventData,(void *)txfailparams,sizeof(SlSockEventData_t));
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&sockAppEvent);
}
break;
case SL_OPCODE_SOCKET_SOCKETASYNCEVENT:
{
SlSockEventData_t *socketAsyncEvent = (SlSockEventData_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
sockAppEvent.Event = SL_SOCKET_ASYNC_EVENT;
sockAppEvent.EventData.socketAsyncEvent.sd = socketAsyncEvent->socketAsyncEvent.sd;
sockAppEvent.EventData.socketAsyncEvent.type = socketAsyncEvent->socketAsyncEvent.type; /* one of the possible types of socket */
sockAppEvent.EventData.socketAsyncEvent.val = socketAsyncEvent->socketAsyncEvent.val;
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&sockAppEvent);
}
break;
case SL_OPCODE_WLAN_SMART_CONFIG_START_ASYNC_RESPONSE:
{
slSmartConfigStartAsyncResponse_t *pResp = (slSmartConfigStartAsyncResponse_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
wlanEvent.Event = SL_WLAN_SMART_CONFIG_COMPLETE_EVENT;
wlanEvent.EventData.smartConfigStartResponse.status = pResp->status;
wlanEvent.EventData.smartConfigStartResponse.ssid_len = pResp->ssid_len;
wlanEvent.EventData.smartConfigStartResponse.private_token_len = pResp->private_token_len;
sl_Memset(wlanEvent.EventData.smartConfigStartResponse.ssid, 0x00, sizeof(wlanEvent.EventData.smartConfigStartResponse.ssid));
sl_Memcpy(wlanEvent.EventData.smartConfigStartResponse.ssid, pResp->ssid, pResp->ssid_len);
/* if private data exist */
if (pResp->private_token_len)
{
sl_Memset(wlanEvent.EventData.smartConfigStartResponse.private_token, 0x00, sizeof(wlanEvent.EventData.smartConfigStartResponse.private_token));
sl_Memcpy(wlanEvent.EventData.smartConfigStartResponse.private_token, pResp->private_token, pResp->private_token_len);
}
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&wlanEvent);
}
break;
case SL_OPCODE_WLAN_SMART_CONFIG_STOP_ASYNC_RESPONSE:
{
slSmartConfigStopAsyncResponse_t *pResp = (slSmartConfigStopAsyncResponse_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
wlanEvent.Event = SL_WLAN_SMART_CONFIG_STOP_EVENT;
wlanEvent.EventData.smartConfigStopResponse.status = pResp->status;
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&wlanEvent);
}
break;
case SL_OPCODE_WLAN_STA_CONNECTED:
{
slPeerInfoAsyncResponse_t* pResp = (slPeerInfoAsyncResponse_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
sl_Memset(&wlanEvent.EventData.APModeStaConnected,0,sizeof(slPeerInfoAsyncResponse_t));
wlanEvent.Event = SL_WLAN_STA_CONNECTED_EVENT;
sl_Memcpy(wlanEvent.EventData.APModeStaConnected.mac,pResp->mac, 6);
sl_Memcpy(wlanEvent.EventData.APModeStaConnected.go_peer_device_name,pResp->go_peer_device_name,pResp->go_peer_device_name_len);
wlanEvent.EventData.APModeStaConnected.go_peer_device_name_len = pResp->go_peer_device_name_len;
sl_Memcpy(wlanEvent.EventData.APModeStaConnected.own_ssid,pResp->own_ssid,pResp->own_ssid_len);
wlanEvent.EventData.APModeStaConnected.own_ssid_len = pResp->own_ssid_len;
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&wlanEvent);
}
break;
case SL_OPCODE_WLAN_STA_DISCONNECTED:
{
slPeerInfoAsyncResponse_t* pResp = (slPeerInfoAsyncResponse_t*)_SL_RESP_ARGS_START(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
sl_Memset(&wlanEvent.EventData.APModestaDisconnected,0,sizeof(slPeerInfoAsyncResponse_t));
wlanEvent.Event = SL_WLAN_STA_DISCONNECTED_EVENT;
sl_Memcpy(wlanEvent.EventData.APModestaDisconnected.mac,pResp->mac, 6);
sl_Memcpy(wlanEvent.EventData.APModestaDisconnected.go_peer_device_name,pResp->go_peer_device_name,pResp->go_peer_device_name_len);
wlanEvent.EventData.APModestaDisconnected.go_peer_device_name_len = pResp->go_peer_device_name_len;
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(&wlanEvent);
}
break;
case SL_OPCODE_NETAPP_PINGREPORTREQUESTRESPONSE:
{
_sl_HandleAsync_PingResponse((void *)g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
}
break;
default:
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
break;
}
}
}
/* ******************************************************************************/
/* _SlDrvMsgReadCmdCtx */
/* ******************************************************************************/
_SlReturnVal_t _SlDrvMsgReadCmdCtx(void)
{
/* after command response is received and isCmdRespWaited */
/* flag is set FALSE, it is necessary to read out all */
/* Async messages in Commands context, because ssiDma_IsrHandleSignalFromSlave */
/* could have dispatched some Async messages to g_NwpIf.CmdSyncObj */
/* after command response but before this response has been processed */
/* by spi_singleRead and isCmdRespWaited was set FALSE. */
while (TRUE == g_pCB->IsCmdRespWaited)
{
if(_SL_PENDING_RX_MSG(g_pCB))
{
g_pCB->FunctionParams.AsyncExt.pAsyncBuf = NULL;/* buffer must be allocated by _SlDrvMsgRead */
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler= NULL;
g_pCB->FunctionParams.AsyncExt.RxMsgClass = (_SlRxMsgClass_e)(-1);/* init to illegal value and verify it's overwritten with the valid one */
VERIFY_RET_OK(_SlDrvMsgRead());
g_pCB->RxDoneCnt++;
if (CMD_RESP_CLASS == g_pCB->FunctionParams.AsyncExt.RxMsgClass)
{
g_pCB->IsCmdRespWaited = FALSE;
/* In case CmdResp has been read without waiting on CmdSyncObj - that */
/* Sync object. That to prevent old signal to be processed. */
sl_SyncObjClear(&g_pCB->CmdSyncObj);
}
else if (ASYNC_EVT_CLASS == g_pCB->FunctionParams.AsyncExt.RxMsgClass)
{
/* If Async event has been read in CmdResp context, check whether */
/* there is a handler for this event. If there is, spawn specific */
/* handler. Otherwise free the event's buffer. */
/* This way there will be no "dry shots" from CmdResp context to */
/* temporary context, i.e less waste of CPU and faster buffer */
/* release. */
_SlAsyncEventGenericHandler();
#if (SL_MEMORY_MGMT == SL_MEMORY_MGMT_STATIC)
g_pCB->FunctionParams.AsyncExt.pAsyncBuf = NULL;
#else
sl_Free(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
#endif
}
}
else
{
/* CmdSyncObj will be signaled by IRQ */
OSI_RET_OK_CHECK(sl_SyncObjWait(&g_pCB->CmdSyncObj, SL_OS_WAIT_FOREVER));
}
}
/* If there are more pending Rx Msgs after CmdResp is received, */
/* that means that these are Async, Dummy or Read Data Msgs. */
/* Spawn _SlDrvMsgReadSpawnCtx to trigger reading these messages from */
/* Temporary context. */
/* sl_Spawn is activated, using a different context */
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->GlobalLockObj));
if(_SL_PENDING_RX_MSG(g_pCB))
{
sl_Spawn((_SlSpawnEntryFunc_t)_SlDrvMsgReadSpawnCtx, NULL, 0);
}
return SL_OS_RET_CODE_OK;
}
/* ******************************************************************************/
/* _SlDrvMsgReadSpawnCtx */
/* ******************************************************************************/
_SlReturnVal_t _SlDrvMsgReadSpawnCtx(void *pValue)
{
#ifdef SL_POLLING_MODE_USED
_i16 retCode = OSI_OK;
/* for polling based systems */
do
{
retCode = sl_LockObjLock(&g_pCB->GlobalLockObj, 0);
if ( OSI_OK != retCode )
{
if (TRUE == g_pCB->IsCmdRespWaited)
{
OSI_RET_OK_CHECK( sl_SyncObjSignal(&g_pCB->CmdSyncObj) );
return SL_RET_CODE_OK;
}
}
}
while (OSI_OK != retCode);
#else
OSI_RET_OK_CHECK(sl_LockObjLock(&g_pCB->GlobalLockObj, SL_OS_WAIT_FOREVER) );
#endif
g_pCB->FunctionParams.AsyncExt.pAsyncBuf = NULL;/* buffer must be allocated by _SlDrvMsgRead */
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler= NULL;
g_pCB->FunctionParams.AsyncExt.RxMsgClass = CMD_RESP_CLASS;/* init to illegal value and verify it's overwritten with the valid one */
/* Messages might have been read by CmdResp context. Therefore after */
/* getting LockObj, check again where the Pending Rx Msg is still present. */
if(FALSE == (_SL_PENDING_RX_MSG(g_pCB)))
{
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->GlobalLockObj));
return SL_RET_CODE_OK;
}
VERIFY_RET_OK(_SlDrvMsgRead());
g_pCB->RxDoneCnt++;
switch(g_pCB->FunctionParams.AsyncExt.RxMsgClass)
{
case ASYNC_EVT_CLASS:
/* If got here and protected by LockObj a message is waiting */
/* to be read */
VERIFY_PROTOCOL(NULL != g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
_SlAsyncEventGenericHandler();
#if (SL_MEMORY_MGMT == SL_MEMORY_MGMT_STATIC)
g_pCB->FunctionParams.AsyncExt.pAsyncBuf = NULL;
#else
sl_Free(g_pCB->FunctionParams.AsyncExt.pAsyncBuf);
#endif
break;
case DUMMY_MSG_CLASS:
case RECV_RESP_CLASS:
/* These types are legal in this context. Do nothing */
break;
case CMD_RESP_CLASS:
/* Command response is illegal in this context. */
/* No 'break' here: Assert! */
default:
VERIFY_PROTOCOL(0);
}
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->GlobalLockObj));
return(SL_RET_CODE_OK);
}
/* ******************************************************************************/
/* _SlDrvClassifyRxMsg */
/* ******************************************************************************/
void _SlDrvClassifyRxMsg(
_SlOpcode_t Opcode)
{
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler = NULL;
/* Async event has received */
if (0 == (SL_OPCODE_SYNC & Opcode))
{
if (SL_OPCODE_DEVICE_DEVICEASYNCDUMMY == Opcode)
{
g_pCB->FunctionParams.AsyncExt.RxMsgClass = DUMMY_MSG_CLASS;
}
else if ( (SL_OPCODE_SOCKET_RECVASYNCRESPONSE == Opcode) || (SL_OPCODE_SOCKET_RECVFROMASYNCRESPONSE == Opcode) || (SL_OPCODE_SOCKET_RECVFROMASYNCRESPONSE_V6 == Opcode) )
{
g_pCB->FunctionParams.AsyncExt.RxMsgClass = RECV_RESP_CLASS;
}
else
{
g_pCB->FunctionParams.AsyncExt.RxMsgClass = ASYNC_EVT_CLASS;
/* set silo handler */
if (SL_OPCODE_SILO_DEVICE == (Opcode & SL_OPCODE_SILO_MASK))
{
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler = _SlDrvDeviceEventHandler;
}
else if (SL_OPCODE_SILO_WLAN == (Opcode & SL_OPCODE_SILO_MASK))
{
#ifdef sl_WlanEvtHdlr
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler = (_SlSpawnEntryFunc_t)sl_WlanEvtHdlr;
#endif
}
else if (SL_OPCODE_SILO_SOCKET == (Opcode & SL_OPCODE_SILO_MASK))
{
#ifdef sl_SockEvtHdlr
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler = (_SlSpawnEntryFunc_t)sl_SockEvtHdlr;
#endif
}
else if (SL_OPCODE_SILO_NETAPP == (Opcode & SL_OPCODE_SILO_MASK))
{
if ((SL_OPCODE_NETAPP_HTTPGETTOKENVALUE == Opcode) || (SL_OPCODE_NETAPP_HTTPPOSTTOKENVALUE == Opcode))
{
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler = _SlDrvNetAppEventHandler;
}
#ifdef sl_NetAppEvtHdlr
else
{
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler = (_SlSpawnEntryFunc_t)sl_NetAppEvtHdlr;
}
#endif
}
/* else if (SL_OPCODE_SILO_NVMEM == (Opcode & SL_OPCODE_SILO_MASK)) */
/* { */
/* } */
/* else if (SL_OPCODE_SILO_NETCFG == (Opcode & SL_OPCODE_SILO_MASK)) */
/* { */
/* } */
else
{
SL_ERROR_TRACE2(MSG_311, "ASSERT: _SlDrvClassifyRxMsg : invalid opcode = 0x%x = %1", Opcode, Opcode);
}
}
}
else
{
/* These may be Command responses only */
g_pCB->FunctionParams.AsyncExt.RxMsgClass = CMD_RESP_CLASS;
}
}
/* ******************************************************************************/
/* _SlDrvShiftDWord */
/* ******************************************************************************/
void _SlDrvShiftDWord(_u8 *pBuf)
{
_u8 ShiftIdx;
for(ShiftIdx = 0; ShiftIdx< 7; ShiftIdx++)
{
pBuf[ShiftIdx] = pBuf[ShiftIdx+1];
}
pBuf[7] = 0;
}
/* ******************************************************************************/
/* _SlDrvRxHdrRead */
/* ******************************************************************************/
_SlReturnVal_t _SlDrvRxHdrRead(_u8 *pBuf, _u8 *pAlignSize)
{
_u32 SyncCnt = 0;
#ifndef SL_IF_TYPE_UART
/* 1. Write CNYS pattern to NWP when working in SPI mode only */
NWP_IF_WRITE_CHECK(g_pCB->FD, (_u8 *)&g_H2NCnysPattern.Short, SYNC_PATTERN_LEN);
#endif
/* 2. Read 4 bytes (protocol aligned) */
NWP_IF_READ_CHECK(g_pCB->FD, &pBuf[0], 4);
_SL_DBG_SYNC_LOG(SyncCnt,pBuf);
/* Wait for SYNC_PATTERN_LEN from the device */
while ( ! N2H_SYNC_PATTERN_MATCH(pBuf, g_pCB->TxSeqNum) )
{
/* 3. Debug limit of scan */
VERIFY_PROTOCOL(SyncCnt < SL_SYNC_SCAN_THRESHOLD);
/* 4. Read next 4 bytes to Low 4 bytes of buffer */
if(0 == (SyncCnt % (_u32)SYNC_PATTERN_LEN))
{
NWP_IF_READ_CHECK(g_pCB->FD, &pBuf[4], 4);
_SL_DBG_SYNC_LOG(SyncCnt,pBuf);
}
/* 5. Shift Buffer Up for checking if the sync is shifted */
_SlDrvShiftDWord(pBuf);
SyncCnt++;
}
/* 5. Sync pattern found. If needed, complete number of read bytes to multiple of 4 (protocol align) */
SyncCnt %= SYNC_PATTERN_LEN;
if(SyncCnt > 0)
{
*(_u32 *)&pBuf[0] = *(_u32 *)&pBuf[4];
NWP_IF_READ_CHECK(g_pCB->FD, &pBuf[SYNC_PATTERN_LEN - SyncCnt], (_u16)SyncCnt);
}
else
{
NWP_IF_READ_CHECK(g_pCB->FD, &pBuf[0], 4);
}
/* 6. Scan for Double pattern. */
while ( N2H_SYNC_PATTERN_MATCH(pBuf, g_pCB->TxSeqNum) )
{
_SL_DBG_CNT_INC(Work.DoubleSyncPattern);
NWP_IF_READ_CHECK(g_pCB->FD, &pBuf[0], SYNC_PATTERN_LEN);
}
g_pCB->TxSeqNum++;
/* 7. Here we've read Generic Header (4 bytes). Read the Resp Specific header (4 more bytes). */
NWP_IF_READ_CHECK(g_pCB->FD, &pBuf[SYNC_PATTERN_LEN], _SL_RESP_SPEC_HDR_SIZE);
/* 8. Here we've read the entire Resp Header. */
/* Return number bytes needed to be sent after read for NWP Rx 4-byte alignment (protocol alignment) */
*pAlignSize = (_u8)((SyncCnt > 0) ? (SYNC_PATTERN_LEN - SyncCnt) : 0);
return SL_RET_CODE_OK;
}
/* ***************************************************************************** */
/* _SlDrvBasicCmd */
/* ***************************************************************************** */
typedef union
{
_BasicResponse_t Rsp;
}_SlBasicCmdMsg_u;
_i16 _SlDrvBasicCmd(_SlOpcode_t Opcode)
{
_SlBasicCmdMsg_u Msg = {0};
_SlCmdCtrl_t CmdCtrl;
CmdCtrl.Opcode = Opcode;
CmdCtrl.TxDescLen = 0;
CmdCtrl.RxDescLen = sizeof(_BasicResponse_t);
VERIFY_RET_OK(_SlDrvCmdOp((_SlCmdCtrl_t *)&CmdCtrl, &Msg, NULL));
return (_i16)Msg.Rsp.status;
}
/* ***************************************************************************** */
/* _SlDrvWaitForPoolObj */
/* ***************************************************************************** */
_i16 _SlDrvWaitForPoolObj(_u32 ActionID, _u8 SocketID)
{
_u8 CurrObjIndex = MAX_CONCURRENT_ACTIONS;
OSI_RET_OK_CHECK(sl_LockObjLock(&g_pCB->ProtectionLockObj, SL_OS_WAIT_FOREVER));
/* Get free object */
if (MAX_CONCURRENT_ACTIONS > g_pCB->FreePoolIdx)
{
/* save the current obj index */
CurrObjIndex = g_pCB->FreePoolIdx;
/* set the new free index */
if (MAX_CONCURRENT_ACTIONS > g_pCB->ObjPool[CurrObjIndex].NextIndex)
{
g_pCB->FreePoolIdx = g_pCB->ObjPool[CurrObjIndex].NextIndex;
}
else
{
/* No further free actions available */
g_pCB->FreePoolIdx = MAX_CONCURRENT_ACTIONS;
}
}
else
{
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->ProtectionLockObj));
return CurrObjIndex;
}
g_pCB->ObjPool[CurrObjIndex].ActionID = (_u8)ActionID;
if (SL_MAX_SOCKETS > SocketID)
{
g_pCB->ObjPool[CurrObjIndex].AdditionalData = SocketID;
}
/*In case this action is socket related, SocketID bit will be on
In case SocketID is set to SL_MAX_SOCKETS, the socket is not relevant to the action. In that case ActionID bit will be on */
while ( ( (SL_MAX_SOCKETS > SocketID) && (g_pCB->ActiveActionsBitmap & (1<<SocketID)) ) || ( (g_pCB->ActiveActionsBitmap & (1<<ActionID)) && (SL_MAX_SOCKETS == SocketID) ) )
{
//action in progress - move to pending list
g_pCB->ObjPool[CurrObjIndex].NextIndex = g_pCB->PendingPoolIdx;
g_pCB->PendingPoolIdx = CurrObjIndex;
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->ProtectionLockObj));
//wait for action to be free
OSI_RET_OK_CHECK(sl_SyncObjWait(&g_pCB->ObjPool[CurrObjIndex].SyncObj, SL_OS_WAIT_FOREVER));
//set params and move to active (remove from pending list at _SlDrvReleasePoolObj)
OSI_RET_OK_CHECK(sl_LockObjLock(&g_pCB->ProtectionLockObj, SL_OS_WAIT_FOREVER));
}
/*mark as active. Set socket as active if action is on socket, otherwise mark action as active*/
if (SL_MAX_SOCKETS > SocketID)
{
g_pCB->ActiveActionsBitmap |= (1<<SocketID);
}
else
{
g_pCB->ActiveActionsBitmap |= (1<<ActionID);
}
/* move to active list */
g_pCB->ObjPool[CurrObjIndex].NextIndex = g_pCB->ActivePoolIdx;
g_pCB->ActivePoolIdx = CurrObjIndex;
/* unlock */
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->ProtectionLockObj));
return CurrObjIndex;
}
/* ******************************************************************************/
/* _SlDrvReleasePoolObj */
/* ******************************************************************************/
void _SlDrvReleasePoolObj(_u8 ObjIdx)
{
_u8 PendingIndex;
OSI_RET_OK_CHECK(sl_LockObjLock(&g_pCB->ProtectionLockObj, SL_OS_WAIT_FOREVER));
/* go over the pending list and release other pending action if needed */
PendingIndex = g_pCB->PendingPoolIdx;
while(MAX_CONCURRENT_ACTIONS > PendingIndex)
{
/* In case this action is socket related, SocketID is in use, otherwise will be set to SL_MAX_SOCKETS */
if ( (g_pCB->ObjPool[PendingIndex].ActionID == g_pCB->ObjPool[ObjIdx].ActionID) &&
( (SL_MAX_SOCKETS == (g_pCB->ObjPool[PendingIndex].AdditionalData & BSD_SOCKET_ID_MASK)) ||
((SL_MAX_SOCKETS > (g_pCB->ObjPool[ObjIdx].AdditionalData & BSD_SOCKET_ID_MASK)) && ( (g_pCB->ObjPool[PendingIndex].AdditionalData & BSD_SOCKET_ID_MASK) == (g_pCB->ObjPool[ObjIdx].AdditionalData & BSD_SOCKET_ID_MASK) ))) )
{
/* remove from pending list */
_SlRemoveFromList(&g_pCB->PendingPoolIdx, PendingIndex);
OSI_RET_OK_CHECK(sl_SyncObjSignal(&(g_pCB->ObjPool[PendingIndex].SyncObj)));
break;
}
PendingIndex = g_pCB->ObjPool[PendingIndex].NextIndex;
}
if (SL_MAX_SOCKETS > (g_pCB->ObjPool[ObjIdx].AdditionalData & BSD_SOCKET_ID_MASK))
{
/* unset socketID */
g_pCB->ActiveActionsBitmap &= ~(1<<(g_pCB->ObjPool[ObjIdx].AdditionalData & BSD_SOCKET_ID_MASK));
}
else
{
/* unset actionID */
g_pCB->ActiveActionsBitmap &= ~(1<<g_pCB->ObjPool[ObjIdx].ActionID);
}
/* delete old data */
g_pCB->ObjPool[ObjIdx].pRespArgs = NULL;
g_pCB->ObjPool[ObjIdx].ActionID = 0;
g_pCB->ObjPool[ObjIdx].AdditionalData = SL_MAX_SOCKETS;
/* remove from active list */
_SlRemoveFromList(&g_pCB->ActivePoolIdx, ObjIdx);
/* move to free list */
g_pCB->ObjPool[ObjIdx].NextIndex = g_pCB->FreePoolIdx;
g_pCB->FreePoolIdx = ObjIdx;
OSI_RET_OK_CHECK(sl_LockObjUnlock(&g_pCB->ProtectionLockObj));
}
/* ******************************************************************************/
/* _SlDrvObjInit */
/* ******************************************************************************/
void _SlDrvObjInit(void)
{
_u8 Idx;
sl_Memset(&g_pCB->ObjPool[0],0,MAX_CONCURRENT_ACTIONS*sizeof(_SlPoolObj_t));
/* place all Obj in the free list */
g_pCB->FreePoolIdx = 0;
for (Idx = 0 ; Idx < MAX_CONCURRENT_ACTIONS ; Idx++)
{
g_pCB->ObjPool[Idx].NextIndex = Idx + 1;
g_pCB->ObjPool[Idx].AdditionalData = SL_MAX_SOCKETS;
}
g_pCB->ActivePoolIdx = MAX_CONCURRENT_ACTIONS;
g_pCB->PendingPoolIdx = MAX_CONCURRENT_ACTIONS;
}
/* ******************************************************************************/
/* _SlDrvObjDeInit */
/* ******************************************************************************/
void _SlDrvObjDeInit(void)
{
g_pCB->FreePoolIdx = 0;
g_pCB->PendingPoolIdx = MAX_CONCURRENT_ACTIONS;
g_pCB->ActivePoolIdx = MAX_CONCURRENT_ACTIONS;
}
/* ******************************************************************************/
/* _SlRemoveFromList */
/* ******************************************************************************/
void _SlRemoveFromList(_u8 *ListIndex, _u8 ItemIndex)
{
_u8 Idx;
/* only one item in the list */
if (MAX_CONCURRENT_ACTIONS == g_pCB->ObjPool[*ListIndex].NextIndex)
{
*ListIndex = MAX_CONCURRENT_ACTIONS;
}
/* need to remove the first item in the list and therefore update the global which holds this index */
else if (*ListIndex == ItemIndex)
{
*ListIndex = g_pCB->ObjPool[ItemIndex].NextIndex;
}
else
{
Idx = *ListIndex;
while(MAX_CONCURRENT_ACTIONS > Idx)
{
/* remove from list */
if (g_pCB->ObjPool[Idx].NextIndex == ItemIndex)
{
g_pCB->ObjPool[Idx].NextIndex = g_pCB->ObjPool[ItemIndex].NextIndex;
break;
}
Idx = g_pCB->ObjPool[Idx].NextIndex;
}
}
}
/* ******************************************************************************/
/* _SlFindAndSetActiveObj */
/* ******************************************************************************/
_SlReturnVal_t _SlFindAndSetActiveObj(_SlOpcode_t Opcode, _u8 Sd)
{
_u8 ActiveIndex;
ActiveIndex = g_pCB->ActivePoolIdx;
/* go over the active list if exist to find obj waiting for this Async event */
while (MAX_CONCURRENT_ACTIONS > ActiveIndex)
{
/* unset the Ipv4\IPv6 bit in the opcode if family bit was set */
if (g_pCB->ObjPool[ActiveIndex].AdditionalData & SL_NETAPP_FAMILY_MASK)
{
Opcode &= ~SL_OPCODE_IPV6;
}
if ((g_pCB->ObjPool[ActiveIndex].ActionID == RECV_ID) && (Sd == g_pCB->ObjPool[ActiveIndex].AdditionalData) &&
( (SL_OPCODE_SOCKET_RECVASYNCRESPONSE == Opcode) || (SL_OPCODE_SOCKET_RECVFROMASYNCRESPONSE == Opcode) || (SL_OPCODE_SOCKET_RECVFROMASYNCRESPONSE_V6 == Opcode) ) )
{
g_pCB->FunctionParams.AsyncExt.ActionIndex = ActiveIndex;
return SL_RET_CODE_OK;
}
/* In case this action is socket related, SocketID is in use, otherwise will be set to SL_MAX_SOCKETS */
if ( (_SlActionLookupTable[ g_pCB->ObjPool[ActiveIndex].ActionID - MAX_SOCKET_ENUM_IDX].ActionAsyncOpcode == Opcode) &&
( ((Sd == (g_pCB->ObjPool[ActiveIndex].AdditionalData & BSD_SOCKET_ID_MASK) ) && (SL_MAX_SOCKETS > Sd)) || (SL_MAX_SOCKETS == (g_pCB->ObjPool[ActiveIndex].AdditionalData & BSD_SOCKET_ID_MASK)) ) )
{
/* set handler */
g_pCB->FunctionParams.AsyncExt.AsyncEvtHandler = _SlActionLookupTable[ g_pCB->ObjPool[ActiveIndex].ActionID - MAX_SOCKET_ENUM_IDX].AsyncEventHandler;
g_pCB->FunctionParams.AsyncExt.ActionIndex = ActiveIndex;
return SL_RET_CODE_OK;
}
ActiveIndex = g_pCB->ObjPool[ActiveIndex].NextIndex;
}
return SL_RET_CODE_SELF_ERROR;
}
/*!
\brief This function handles events for IP address acquisition via DHCP
indication
\param[in] pNetAppEvent is the event passed to the handler
\return None
\note
\warning
*/
void SimpleLinkNetAppEventHandler(SlNetAppEvent_t *pNetAppEvent)
{
if(pNetAppEvent == NULL)
// CLI_Write((_u8 *)" [NETAPP EVENT] NULL Pointer Error \n\r");
printf(" [NETAPP EVENT] NULL Pointer Error \n\r");
switch(pNetAppEvent->Event)
{
case SL_NETAPP_IPV4_IPACQUIRED_EVENT:
{
SlIpV4AcquiredAsync_t *pEventData = NULL;
SET_STATUS_BIT(g_Status, STATUS_BIT_IP_ACQUIRED);
pEventData = &pNetAppEvent->EventData.ipAcquiredV4;
g_GatewayIP = pEventData->gateway;
}
break;
case SL_NETAPP_IP_LEASED_EVENT:
{
g_StationIP = pNetAppEvent->EventData.ipLeased.ip_address;
SET_STATUS_BIT(g_Status, STATUS_BIT_IP_LEASED);
}
break;
default:
{
// CLI_Write((_u8 *)" [NETAPP EVENT] Unexpected event \n\r");
printf(" [NETAPP EVENT] Unexpected event \n\r");
}
break;
}
}
/*!
\brief This function handles WLAN events
\param[in] pWlanEvent is the event passed to the handler
\return None
\note
\warning
*/
void SimpleLinkWlanEventHandler(SlWlanEvent_t *pWlanEvent)
{
if(pWlanEvent == NULL)
// CLI_Write((_u8 *)" [WLAN EVENT] NULL Pointer Error \n\r");
printf(" [WLAN EVENT] NULL Pointer Error \n\r");
switch(pWlanEvent->Event)
{
case SL_WLAN_CONNECT_EVENT:
{
SET_STATUS_BIT(g_Status, STATUS_BIT_CONNECTION);
/*
* Information about the connected AP (like name, MAC etc) will be
* available in 'slWlanConnectAsyncResponse_t' - Applications
* can use it if required
*
* slWlanConnectAsyncResponse_t *pEventData = NULL;
* pEventData = &pWlanEvent->EventData.STAandP2PModeWlanConnected;
*
*/
}
break;
case SL_WLAN_DISCONNECT_EVENT:
{
slWlanConnectAsyncResponse_t* pEventData = NULL;
CLR_STATUS_BIT(g_Status, STATUS_BIT_CONNECTION);
CLR_STATUS_BIT(g_Status, STATUS_BIT_IP_ACQUIRED);
pEventData = &pWlanEvent->EventData.STAandP2PModeDisconnected;
/* If the user has initiated 'Disconnect' request, 'reason_code' is SL_USER_INITIATED_DISCONNECTION */
if(SL_USER_INITIATED_DISCONNECTION == pEventData->reason_code)
{
// CLI_Write((_u8 *)" Device disconnected from the AP on application's request \n\r");
printf(" Device disconnected from the AP on application's request \n\r");
}
else
{
// CLI_Write((_u8 *)" Device disconnected from the AP on an ERROR..!! \n\r");
printf(" Device disconnected from the AP on an ERROR..!! \n\r");
}
}
break;
case SL_WLAN_STA_CONNECTED_EVENT:
{
SET_STATUS_BIT(g_Status, STATUS_BIT_STA_CONNECTED);
}
break;
case SL_WLAN_STA_DISCONNECTED_EVENT:
{
CLR_STATUS_BIT(g_Status, STATUS_BIT_STA_CONNECTED);
CLR_STATUS_BIT(g_Status, STATUS_BIT_IP_LEASED);
}
break;
default:
{
// CLI_Write((_u8 *)" [WLAN EVENT] Unexpected event \n\r");
printf(" [WLAN EVENT] Unexpected event \n\r");
}
break;
}
}
/*!
\brief This function handles socket events indication
\param[in] pSock is the event passed to the handler
\return None
*/
void SimpleLinkSockEventHandler(SlSockEvent_t *pSock)
{
/*
* This application doesn't work with socket - Hence these
* events are not handled here
*/
// CLI_Write((_u8 *)" [SOCK EVENT] Unexpected event \n\r");
printf(" [SOCK EVENT] Unexpected event \n\r");
}