File content as of revision 1:e448e81c416f:

#ifndef __LED_CONFIG_H__
#define    __LED_CONFIG_H__

typedef enum
{
    NO_LED,
    led3 = 0x1, /* RED LED D7/GP9/Pin64 */
    led4 = 0x2, /* ORANGE LED D6/GP10/Pin1 */
    led5 = 0x3  /* GREEN LED D5/GP11/Pin2 */

} ledEnum;


typedef enum
{
    NO_LED_IND = NO_LED,
    MCU_SENDING_DATA_IND = 4,
    MCU_ASSOCIATED_IND, /* Device associated to an AP */
    MCU_IP_ALLOC_IND, /* Device acquired an IP */
    MCU_SERVER_INIT_IND, /* Device connected to remote server */
    MCU_CLIENT_CONNECTED_IND, /* Any client connects to device */
    MCU_ON_IND,              /* Device SLHost invoked successfully */
    MCU_EXECUTE_SUCCESS_IND, /* Task executed sucessfully */
    MCU_EXECUTE_FAIL_IND, /* Task execution failed */
    MCU_RED_LED_GPIO = led3,   /* GP09 for LED RED as per LP 3.0 */
    MCU_ORANGE_LED_GPIO = led4,/* GP10 for LED ORANGE as per LP 3.0 */
    MCU_GREEN_LED_GPIO = led5, /* GP11 for LED GREEN as per LP 3.0 */
    MCU_ALL_LED_IND = 12
} ledNames;

//*****************************************************************************
//
//! Turn LED On
//!
//! \param  ledNum is the LED Number
//!
//! \return none
//!
//! \brief  Turns a specific LED Off
//
//*****************************************************************************
void GPIO_IF_LedOn(char ledNum);

//*****************************************************************************
//
//! Turn LED Off
//!
//! \param  ledNum is the LED Number
//!
//! \return none
//!
//! \brief  Turns a specific LED Off
//
//*****************************************************************************
void GPIO_IF_LedOff(char ledNum);

//*****************************************************************************
//
//!  \brief This function returns LED current Status
//!
//!  \param[in] ucGPIONum is the GPIO to which the LED is connected
//!                MCU_GREEN_LED_GPIO\MCU_ORANGE_LED_GPIO\MCU_RED_LED_GPIO
//!
//!
//!  \return 1: LED ON, 0: LED OFF
//
//*****************************************************************************
unsigned char GPIO_IF_LedStatus(unsigned char ucGPIONum);

//*****************************************************************************
//
//! Toggle the Led state
//!
//! \param  ledNum is the LED Number
//!
//! \return none
//!
//! \brief  Toggles a board LED
//
//*****************************************************************************
void GPIO_IF_LedToggle(unsigned char ucLedNum);

//****************************************************************************
//
//! Set a value to the specified GPIO pin
//!
//! \param ucPin is the GPIO pin to be set (0:39)
//! \param uiGPIOPort is the GPIO port address
//! \param ucGPIOPin is the GPIO pin of the specified port
//! \param ucGPIOValue is the value to be set
//! 
//! This function  
//!    1. Sets a value to the specified GPIO pin
//!
//! \return None.
//
//****************************************************************************
void GPIO_IF_Set(unsigned char ucPin,
             unsigned int uiGPIOPort,
             unsigned char ucGPIOPin,
             unsigned char ucGPIOValue);
             
//****************************************************************************
//
//! Set a value to the specified GPIO pin
//!
//! \param ucPin is the GPIO pin to be set (0:39)
//! \param uiGPIOPort is the GPIO port address
//! \param ucGPIOPin is the GPIO pin of the specified port
//!
//! This function
//!    1. Gets a value of the specified GPIO pin
//!
//! \return value of the GPIO pin
//
//****************************************************************************
unsigned char
GPIO_IF_Get(unsigned char ucPin,
             unsigned int uiGPIOPort,
             unsigned char ucGPIOPin);             

#endif