This program is guided to help establish a connection between two RFM95 900MHz LoRa radio modules using Maxim Integrated's Feather MCUs (MAX32630FTHR Mbed and the MAX32620FTHR Mbed). Once the radios are configured after powering on and if the radios are wired correctly, the two radios will self identify as either a master or a slave, and will then proceed to PING and PONG back and forth. Information about what is happening between the radios can be seen if the two boards are hooked up to a USB COM port through the included DAPLINK/MAX32625PICO modules.

Dependencies:   BufferedSerial SX1276GenericLib USBDeviceHT max32630fthr

Fork of MAX326xxFTHR_LoRa_PingPong by Devin Alexander

Committer:
Helmut64
Date:
Fri Feb 23 12:57:25 2018 +0000
Revision:
17:98f2528e8399
Parent:
16:675f4d0ee9e9
Child:
18:d5527ce82e6b
Added Heltec L4 board Pins into PinMap.h; Added USBDevice library to support USBSerial console IO; Moved helper code into utils.cpp; Moved dprintf support with var args and serial or USBSerial output.; Added compile time version support to set RTC to compi...

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Helmut64 0:c43b6919ae15 1 /*
Helmut64 17:98f2528e8399 2 * Copyright (c) 2018 HELIOS Software GmbH
Helmut64 0:c43b6919ae15 3 * 30826 Garbsen (Hannover) Germany
Helmut64 0:c43b6919ae15 4 * Licensed under the Apache License, Version 2.0);
Helmut64 0:c43b6919ae15 5 */
Helmut64 0:c43b6919ae15 6 #include "main.h"
Helmut64 0:c43b6919ae15 7
Helmut64 0:c43b6919ae15 8
Helmut64 17:98f2528e8399 9 DigitalOut myled(LED);
Helmut64 0:c43b6919ae15 10
Helmut64 0:c43b6919ae15 11
Helmut64 17:98f2528e8399 12 int main() {
Helmut64 17:98f2528e8399 13 #ifdef HELTEC_STM32L4
Helmut64 17:98f2528e8399 14 DigitalOut vext(POWER_VEXT);
Helmut64 17:98f2528e8399 15 vext = POWER_VEXT_ON;
Helmut64 17:98f2528e8399 16 #endif
Helmut64 17:98f2528e8399 17 /*
Helmut64 17:98f2528e8399 18 * inits the Serial or USBSerial when available (230400 baud).
Helmut64 17:98f2528e8399 19 * If the serial uart is not is not connected it swiches to USB Serial
Helmut64 17:98f2528e8399 20 * blinking LED means USBSerial detected, waiting for a connect.
Helmut64 17:98f2528e8399 21 * It waits up to 30 seconds for a USB terminal connections
Helmut64 17:98f2528e8399 22 */
Helmut64 17:98f2528e8399 23 InitSerial(30*1000, &myled);
Helmut64 17:98f2528e8399 24 dprintf("Welcome to the SX1276GenericLib");
Helmut64 17:98f2528e8399 25 myled = 1;
Helmut64 0:c43b6919ae15 26
Helmut64 17:98f2528e8399 27 dprintf("Starting a simple LoRa PingPong");
Helmut64 17:98f2528e8399 28 SX1276PingPong();
Helmut64 0:c43b6919ae15 29 }