This program is guided to help establish a connection between two RFM95 900MHz LoRa radio modules using Maxim Integrated's Feather MCUs (MAX32630FTHR Mbed and the MAX32620FTHR Mbed). Once the radios are configured after powering on and if the radios are wired correctly, the two radios will self identify as either a master or a slave, and will then proceed to PING and PONG back and forth. Information about what is happening between the radios can be seen if the two boards are hooked up to a USB COM port through the included DAPLINK modules.
Dependencies: BufferedSerial SX1276GenericLib USBDeviceHT max32630fthr
Fork of MAX326xxFTHR_LoRa_PingPong by
Diff: PinMap.h
- Revision:
- 13:5a32a1922fbc
- Parent:
- 9:2f9e4be4d046
- Child:
- 15:c70f65d606c4
--- a/PinMap.h Tue Jul 11 11:37:03 2017 +0000 +++ b/PinMap.h Tue Aug 08 08:49:06 2017 +0000 @@ -10,18 +10,11 @@ #define FEATURE_LORA 1 #elif TARGET_DISCO_L072CZ_LRWAN1 #define FEATURE_LORA 1 - #define B_L072Z_LRWAN1_LORA 1 // the STM Lora Board #endif -#if defined(TARGET_STM32L0) - -#ifdef B_L072Z_LRWAN1_LORA // B-L072Z-LRWAN1 LoRa Board using the Murta SX1276 -#define USER_BUTTON PB_2 // Red not PC13 as used on the Nucleo -#define LED2 PA_5 // Green -#define LED3 PB_6 // Blue -#define LED4 PB_7 // Red +#if defined(TARGET_DISCO_L072CZ_LRWAN1) #define LORA_SPI_MOSI PA_7 #define LORA_SPI_MISO PA_6 @@ -31,14 +24,13 @@ #define LORA_DIO0 PB_4 #define LORA_DIO1 PB_1 #define LORA_DIO2 PB_0 -#define LORA_DIO3 (PinName)0x2D //PC_13 +#define LORA_DIO3 PC_13 #define LORA_DIO4 PA_5 #define LORA_DIO5 PA_4 #define LORA_ANT_RX PA_1 #define LORA_ANT_TX PC_2 #define LORA_ANT_BOOST PC_1 #define LORA_TCXO PA_12 // 32 MHz -#endif // B_L072Z_LRWAN1_LORA