FightSense demo for PoliMI
Dependencies: X_NUCLEO_6180XA1 mbed
Fork of HelloWorld_6180XA1 by
Diff: main.cpp
- Revision:
- 10:5319abadb31e
- Parent:
- 9:1d0e839edee8
- Child:
- 11:657dbe7bf245
--- a/main.cpp Tue Oct 13 14:26:18 2015 +0200 +++ b/main.cpp Mon Oct 19 13:57:36 2015 +0200 @@ -6,10 +6,29 @@ #include <stdio.h> #include <assert.h> - #define VL6180X_I2C_SDA I2C_SDA #define VL6180X_I2C_SCL I2C_SCL +//#define RANGE_SINGLE_SHOT_POLLING +//#define ALS_SINGLE_SHOT_POLLING +//#define RANGE_CONTINUOUS_POLLING +//#define ALS_CONTINUOUS_POLLING +//#define RANGE_CONTINUOUS_INTERRUPT +//#define ALS_CONTINUOUS_INTERRUPT +#define INTERLEAVED_MODE_INTERRUPT +//#define RANGE_CONTINUOUS_POLLING_LOW_THRESHOLD +//#define RANGE_CONTINUOUS_POLLING_HIGH_THRESHOLD +//#define RANGE_CONTINUOUS_POLLING_OUT_OF_WINDOW +//#define ALS_CONTINUOUS_POLLING_LOW_THRESHOLD +//#define ALS_CONTINUOUS_POLLING_HIGH_THRESHOLD +//#define ALS_CONTINUOUS_POLLING_OUT_OF_WINDOW +//#define RANGE_CONTINUOUS_INTERRUPT_LOW_THRESHOLD +//#define RANGE_CONTINUOUS_INTERRUPT_HIGH_THRESHOLD +//#define RANGE_CONTINUOUS_INTERRUPT_OUT_OF_WINDOW +//#define ALS_CONTINUOUS_INTERRUPT_LOW_THRESHOLD +//#define ALS_CONTINUOUS_INTERRUPT_HIGH_THRESHOLD +//#define ALS_CONTINUOUS_INTERRUPT_OUT_OF_WINDOW + /* Polling operating modes (1,2,3 and 4) don`t require callback function that handles IRQ Callback functions are used only for measure that require interrupt */ @@ -24,10 +43,13 @@ /* flags that handle the call to HandleIRQ function */ bool flag_sensor_top=false, flag_sensor_bottom=false, flag_sensor_left=false, flag_sensor_right=false; +//Timer timer; +//int start, end; + /* callback functions of the sensors */ void SensorTopIRQ(void) { - flag_sensor_top=true; + flag_sensor_top=true; board->sensor_top->DisableInterruptMeasureDetectionIRQ(); } @@ -37,119 +59,177 @@ { int status; - status=board->InitBoard(); + status=board->InitBoard(); if(status) printf("Failed to init the board!\n\r"); - - /* - status=board->sensor_top->StartMeasurement(range_single_shot_polling, NULL, &Data); + +#ifdef RANGE_SINGLE_SHOT_POLLING + status=board->sensor_top->StartMeasurement(range_single_shot_polling, NULL, &Data, NULL, NULL); if(!status) - printf("Range single shot: %d\n\r",Data.range_mm); - else + printf("Range single shot: %dmm\n\r",Data.range_mm); + else if(status==INVALID_PARAMS) printf("Failed to start measurement!\n\r"); - status=board->sensor_top->StartMeasurement(als_single_shot_polling, NULL, &Data); - if(!status) - printf("Light single shot: %d\n\r",Data.lux); else - printf("Failed to start measurement!\n\r"); + printf("Invalid range value!\n\r"); + status=board->sensor_top->StopMeasurement(range_single_shot_polling); + if(status) + printf("Failed to stop measurement!\n\r"); +#endif - status=board->sensor_top->StartMeasurement(range_continuous_polling, NULL, &Data); +#ifdef ALS_SINGLE_SHOT_POLLING + status=board->sensor_top->StartMeasurement(als_single_shot_polling, NULL, &Data, NULL, NULL); + if(!status) + printf("Light single shot: %dlux\n\r",Data.lux); + else if(status==INVALID_PARAMS) + printf("Failed to start measurement!\n\r"); + else + printf("Invalid light value!\n\r"); + status=board->sensor_top->StopMeasurement(als_single_shot_polling); + if(status) + printf("Failed to stop measurement!\n\r"); +#endif + +#ifdef RANGE_CONTINUOUS_POLLING + status=board->sensor_top->StartMeasurement(range_continuous_polling, NULL, &Data, NULL, NULL); if(!status) { - status=board->sensor_top->GetRangeMeasContinuousMode(&Data); - if(!status) - printf("1a Range: %d\n\r",Data.range_mm); - else - printf("Invalid range value!\n\r"); - status=board->sensor_top->GetRangeMeasContinuousMode(&Data); - if(!status) - printf("2a Range: %d\n\r",Data.range_mm); - else - printf("Invalid range value!\n\r"); - status=board->sensor_top->GetRangeMeasContinuousMode(&Data); - if(!status) - printf("3a Range: %d\n\r",Data.range_mm); - else - printf("Invalid range value!\n\r"); + int i; + for(i=0;i<10;i++) + { + status=board->sensor_top->GetMeasurement(range_continuous_polling, &Data); + if(!status) + printf("Range measure %d: %dmm\n\r",i+1,Data.range_mm); + else + printf("Invalid range value!\n\r"); + } + } + else + printf("Failed to start measurement!\n\r"); + status=board->sensor_top->StopMeasurement(range_continuous_polling); + if(status) + printf("Failed to stop measurement!\n\r"); +#endif + +#ifdef ALS_CONTINUOUS_POLLING + status=board->sensor_top->StartMeasurement(als_continuous_polling, NULL, &Data, NULL, NULL); + if(!status) + { + int i; + for(i=0;i<10;i++) + { + status=board->sensor_top->GetMeasurement(als_continuous_polling, &Data); + if(!status) + printf("Light measure %d: %dlux\n\r",i,Data.lux); + else + printf("Invalid light value!\n\r"); + } } else printf("Failed to start measurement!\n\r"); + status=board->sensor_top->StopMeasurement(als_continuous_polling); + if(status) + printf("Failed to stop measurement!\n\r"); +#endif - status=board->sensor_top->StartMeasurement(als_continuous_polling, NULL, &Data); +#ifdef RANGE_CONTINUOUS_INTERRUPT + status=board->sensor_top->StartMeasurement(range_continuous_interrupt, SensorTopIRQ, &Data, NULL, NULL); if(!status) { - status=board->sensor_top->GetAlsMeasContinuousMode(&Data); - if(!status) - printf("1a Light: %d\n\r",Data.lux); - else - printf("Invalid light value!\n\r"); - status=board->sensor_top->GetAlsMeasContinuousMode(&Data); - if(!status) - printf("2a Light: %d\n\r",Data.lux); - else - printf("Invalid light value!\n\r"); - status=board->sensor_top->GetAlsMeasContinuousMode(&Data); - if(!status) - printf("3a Light: %d\n\r",Data.lux); - else - printf("Invalid light value!\n\r"); - } + while(1) + { + if(flag_sensor_top) + { + flag_sensor_top=false; + status=board->sensor_top->HandleIRQ(range_continuous_interrupt, &Data); + if(!status) + printf("Range int: %dmm\n\r",Data.range_mm); + else + printf("Invalid range value!\n\r"); + } + } + } + else + printf("Failed to start measurement!\n\r"); + status=board->sensor_top->StopMeasurement(range_continuous_interrupt); + if(status) + printf("Failed to stop measurement!\n\r"); +#endif + +#ifdef ALS_CONTINUOUS_INTERRUPT + status=board->sensor_top->StartMeasurement(als_continuous_interrupt, SensorTopIRQ, &Data, NULL, NULL); + if(!status) + { + while(1) + { + if(flag_sensor_top) + { + flag_sensor_top=false; + status=board->sensor_top->HandleIRQ(als_continuous_interrupt, &Data); + if(!status) + printf("Light int: %dlux\n\r",Data.lux); + else + printf("Invalid light value!\n\r"); + } + } + } else - printf("Failed to start measurement!\n\r"); - */ - - /*board->sensor_top->StartMeasurement(range_continuous_interrupt, SensorTopIRQ, &Data); - while(1) - { - if(flag_sensor_top) - { - flag_sensor_top=false; - board->sensor_top->HandleIRQ(range_measure, &Data); - if((Data.range_error==0)&&(Data.int_error==0)) - printf("Range int: %d\n\r",Data.range_mm); - else - printf("Invalid range value!\n\r"); - } - }*/ + printf("Failed to stop measurement!\n\r"); + status=board->sensor_top->StopMeasurement(als_continuous_interrupt); + if(status) + printf("Failed to stop measurement!\n\r"); +#endif - /*board->sensor_top->StartMeasurement(als_continuous_interrupt, SensorTopIRQ, &Data); - while(1) - { - if(flag_sensor_top) - { - flag_sensor_top=false; - board->sensor_top->HandleIRQ(light_measure, &Data); - if((Data.als_error==0)&&(Data.int_error==0)) - printf("Light int: %d\n\r",Data.lux); - else - printf("Invalid light value!\n\r"); - } - }*/ - - - board->sensor_top->StartMeasurement(interleaved_mode, SensorTopIRQ, &Data); - while(1) +#ifdef INTERLEAVED_MODE_INTERRUPT + status=board->sensor_top->StartMeasurement(interleaved_mode_interrupt, SensorTopIRQ, &Data, NULL, NULL); + if(!status) { - if(flag_sensor_top) - { - flag_sensor_top=false; - board->sensor_top->HandleIRQ(light_range_measure, &Data); - if((Data.range_error==0)&&(Data.int_error==0)) - printf("Interleaved_mode->Range: %d\n\r",Data.range_mm); - else - printf("Invalid range value!\n\r"); - if((Data.als_error==0)&&(Data.int_error==0)) - printf("Interleaved_mode->Light: %d\n\r",Data.lux); - else - printf("Invalid light value!\n\r"); - } + while(1) + { + if(flag_sensor_top) + { + flag_sensor_top=false; + status=board->sensor_top->HandleIRQ(interleaved_mode_interrupt, &Data); + if(!status) + { + printf("Interleaved_mode->Range: %dmm\n\r",Data.range_mm); + printf("Interleaved_mode->Light: %dlux\n\r",Data.lux); + } + else + printf("Invalid range or light value!\n\r"); + } + } } - - - - //board->~X_NUCLEO_6180XA1(); + else + printf("Failed to stop measurement!\n\r"); + status=board->sensor_top->StopMeasurement(interleaved_mode_interrupt); + if(status) + printf("Failed to stop measurement!\n\r"); +#endif + +#ifdef RANGE_CONTINUOUS_INTERRUPT_LOW_THRESHOLD + status=board->sensor_top->StartMeasurement(range_continuous_interrupt_low_threshold, SensorTopIRQ, &Data, 80, NULL); + if(!status) + { + while(1) + { + if(flag_sensor_top) + { + flag_sensor_top=false; + status=board->sensor_top->HandleIRQ(range_continuous_interrupt_low_threshold, &Data); + if(!status) + printf("Range int low threshold: %dmm\n\r",Data.range_mm); + else + printf("Invalid range value!\n\r"); + } + } + } + else + printf("Failed to start measurement!\n\r"); + status=board->sensor_top->StopMeasurement(range_continuous_interrupt_low_threshold); + if(status) + printf("Failed to stop measurement!\n\r"); +#endif } -