ST/USBHOST forked to add another HID handler for raw keyboard data to get more detail not available with current handlers (all pressed keys, all releases, and periodic updates)
Dependents: C64-stm429_discovery
Diff: USBHost/TARGET_STM/USBEndpoint_STM.cpp
- Revision:
- 1:ab240722d7ef
- Child:
- 3:1c76b46ad779
diff -r c7d19e2470b1 -r ab240722d7ef USBHost/TARGET_STM/USBEndpoint_STM.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHost/TARGET_STM/USBEndpoint_STM.cpp Wed Feb 15 10:49:44 2017 +0100 @@ -0,0 +1,139 @@ +/* mbed USBHost Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#if defined(TARGET_STM) && defined(USBHOST_OTHER) + +#include "dbg.h" +#include "USBEndpoint.h" +extern uint32_t HAL_HCD_HC_GetMaxPacket(HCD_HandleTypeDef *hhcd, uint8_t chn_num); +extern uint32_t HAL_HCD_HC_GetType(HCD_HandleTypeDef *hhcd, uint8_t chn_num); + + +void USBEndpoint::init(HCED * hced_, ENDPOINT_TYPE type_, ENDPOINT_DIRECTION dir_, uint32_t size, uint8_t ep_number, HCTD* td_list_[2]) +{ + hced = hced_; + type = type_; + dir = dir_; + setup = (type == CONTROL_ENDPOINT) ? true : false; + + //TDs have been allocated by the host + memcpy((HCTD**)td_list, td_list_, sizeof(HCTD*)*2); //TODO: Maybe should add a param for td_list size... at least a define + memset(td_list_[0], 0, sizeof(HCTD)); + memset(td_list_[1], 0, sizeof(HCTD)); + + td_list[0]->ep = this; + td_list[1]->ep = this; + + address = (ep_number & 0x7F) | ((dir - 1) << 7); + this->size = size; + this->ep_number = ep_number; + transfer_len = 0; + transferred = 0; + buf_start = 0; + nextEp = NULL; + + td_current = td_list[0]; + td_next = td_list[1]; + + intf_nb = 0; + + state = USB_TYPE_IDLE; +} +void USBEndpoint::setSize(uint32_t size) +{ + this->size = size; +} + + +void USBEndpoint::setDeviceAddress(uint8_t addr) +{ + this->device_address = addr; + HAL_HCD_HC_Init((HCD_HandleTypeDef*)hced->hhcd,hced->ch_num, address, addr, HCD_SPEED_FULL, type, size); +} + +void USBEndpoint::setSpeed(uint8_t speed) +{ + this->speed = speed; +} + + + +void USBEndpoint::setState(uint8_t st) { + if (st > 18) + return; + if (state == USB_TYPE_FREE) HAL_HCD_HC_Halt((HCD_HandleTypeDef*)hced->hhcd, hced->ch_num); + + state = (USB_TYPE)st; +} + + +extern uint32_t HAL_HCD_HC_GetMaxPacket(HCD_HandleTypeDef *hhcd, uint8_t chn_num); +extern uint32_t HAL_HCD_HC_GetType(HCD_HandleTypeDef *hhcd, uint8_t chn_num); + + +USB_TYPE USBEndpoint::queueTransfer() +{ + HCD_HandleTypeDef *hhcd = (HCD_HandleTypeDef*)hced->hhcd; + uint32_t *addr = &((uint32_t *)hhcd->pData)[hced->ch_num]; + uint32_t type = HAL_HCD_HC_GetType(hhcd, hced->ch_num); + uint32_t max_size = HAL_HCD_HC_GetMaxPacket(hhcd, hced->ch_num); + /* if a packet is queue on disconnected ; no solution for now */ + if(*addr == (uint32_t) -1) { + /* set td as disconnected */ + td_current->state = USB_TYPE_DISCONNECTED; + return USB_TYPE_DISCONNECTED; + } + MBED_ASSERT(*addr ==0); + if ((type == EP_TYPE_BULK) || (type== EP_TYPE_CTRL)) { + transfer_len = td_current->size <= max_size ? td_current->size : max_size; + transferred = td_current->size; + } else { + transfer_len = td_current->size; + transferred = td_current->size; + MBED_ASSERT(transferred <= (int)max_size); + } + buf_start = (uint8_t *)td_current->currBufPtr; + + //Now add this free TD at this end of the queue + state = USB_TYPE_PROCESSING; + /* one request */ + td_current->nextTD = (hcTd*)0; + + *addr = (uint32_t)td_current; + /* dir /setup is inverted for ST */ + /* token is useful only ctrl endpoint */ + /* last parameter is ping ? */ + MBED_ASSERT(HAL_HCD_HC_SubmitRequest((HCD_HandleTypeDef*)hced->hhcd, hced->ch_num, dir-1, type,!setup,(uint8_t*) td_current->currBufPtr, transfer_len, 0)==HAL_OK); + return USB_TYPE_PROCESSING; +} + +void USBEndpoint::unqueueTransfer(volatile HCTD * td) +{ + + uint32_t *addr = &((uint32_t *)((HCD_HandleTypeDef*)hced->hhcd)->pData)[hced->ch_num]; + td->state=0; + td->currBufPtr=0; + td->size=0; + td->nextTD=0; + *addr = 0; + td_current = td_next; + td_next = td; +} + +void USBEndpoint::queueEndpoint(USBEndpoint * ed) +{ + nextEp = ed; +} +#endif