Diff: HSP/Devices/HspLed/HspLed/HspLed.h

Revision:

5:3e44c4c7a9ec

Parent:

4:10d2c2a56c2a

Child:

6:b9cbee07e660

--- a/HSP/Devices/HspLed/HspLed/HspLed.h	Fri Apr 13 15:40:42 2018 +0300
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,170 +0,0 @@
-/*******************************************************************************
- * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included
- * in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
- * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
- * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the name of Maxim Integrated
- * Products, Inc. shall not be used except as stated in the Maxim Integrated
- * Products, Inc. Branding Policy.
- *
- * The mere transfer of this software does not imply any licenses
- * of trade secrets, proprietary technology, copyrights, patents,
- * trademarks, maskwork rights, or any other form of intellectual
- * property whatsoever. Maxim Integrated Products, Inc. retains all
- * ownership rights.
- *******************************************************************************
- */
-#ifndef _LED_H_
-#define _LED_H_
-
-#include "mbed.h"
-
-/**
- * Driver for the HSP Led, supports different blink rates and patterns
- *
- * @code
- * #include <stdio.h>
- * #include "mbed.h"
- * #include "xxx.h"
- *
- * I2C i2c(I2C_SDA, I2C_SCL);
- * xxx xxx(&i2c);
- *
- * int main(void) {
- *	   printf("Initialized xxx\n");
- *     while(1) {
- *         if (xxx.init() != 0) {
- *             printf("Error communicating with xxx\n");
- *         } else {
- *             printf("Initialized xxx\n");
- *             break;
- *         }
- *         wait(1);
- *     }
- *
- *     while(1) {
- *         printf("");
- *         wait(1);
- *     }
- * }
- * @endcode
- */
-
-class HspLed {
-public:
-  static const int LED_ON = 0;
-  static const int LED_OFF = 1;
-
-  /// define all of the modes the LED can support
-  typedef enum eMode {
-    eLedOn,
-    eLedOff,
-    eLedPeriod,
-    eLedPattern
-  } eMode;
-  /// define the values that turn the LED on or off at the pin
-  #define HSP_LED_ON 0
-  #define HSP_LED_OFF 1
-
-  /*
-  * @brief Constructor where you specify the LED pin name
-  */
-  HspLed(PinName ledPin);
-  
-  /**
-  * Blink the HSP LED at a set time interval
-  * @param mSeconds Number of seconds to set the timer interval
-  */
-  void blink(uint32_t mSeconds);
-  
-  /**
-  * @brief Start rotating the LED through a 32-bit pattern at a mS rate specified
-  * @param pattern 32-bit pattern to rotate through
-  * @param mSeconds the amount of time to take per bit in the pattern
-  */ 
-  void pattern(uint32_t pattern, uint32_t mSeconds);
-  
-  /**
-  * @brief Turn the LED on
-  */
-  void on(void);
-  
-  /**
-  * @brief Turn the LED off
-  */
-  void off(void);
-
-  /**
-  * @brief Update the LED
-  */ 
-  void service(void);
-
-private:
-
-  /**
-  * Set the mode of the LED, the mode include blinking at a set rate or blinking
-  * according to a pattern
-  * @param mode Mode to set the LED to
-  */
-  void setMode(eMode state);
-  
-  /**
-  * Toggle the state of the LED
-  */
-  void toggle(void);
-
-  /**
-  * Start the LED blinking or rotating through a pattern
-  */
-  void start(void);
-
-  /**
-  * Stop blinking or rotating through a pattern
-  */
-  void stop(void);
-  
-  /**
-  * Write the LED pin to a state
-  * @param state A one or zero value to write to the LED pin
-  */  
-  void state(int state);
-
-  /*
-  * @brief Single step through the pattern and output to the LED
-  */
-  void patternToLed(void);
-
-  /// timer interval in mS
-  float timerInterval;
-  /// last timer interval set to... used to prevent resetting the timer to the same value
-  float timerIntervalLast;
-  /// local state of the pattern to rotate through
-  uint32_t bitPattern;
-  /// current mode of the LED
-  eMode mode;
-  /// the LED digital output
-  DigitalOut redLed;
-  /// Timer service used to update the LED
-  Ticker ticker;
-  /// Flag to indicate if the timer has been started
-  bool isStarted;
-};
-
-#endif /* _LED_H_ */
-