Danillo Mangue Baja
PinNames.h
- Committer:
- hudakz
- Date:
- 2016-11-23
- Revision:
- 7:09d8c2eacb4d
- Parent:
- 6:e35173aca75e
- Child:
- 9:0340d6204caf
File content as of revision 7:09d8c2eacb4d:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2014, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* * * Modified by Zoltan Hudak * */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif #define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\ ((PUPD & 0x07) << 4) |\ ((AFNUM & 0x0F) << 7))) #define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\ ((PUPD & 0x07) << 4) |\ ((AFNUM & 0x0F) << 7) |\ ((CHANNEL & 0x0F) << 11) |\ ((INVERTED & 0x01) << 15))) #define STM_PIN_MODE(X) (((X) >> 0) & 0x0F) #define STM_PIN_PUPD(X) (((X) >> 4) & 0x07) #define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F) #define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F) #define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01) #define STM_MODE_INPUT (0) #define STM_MODE_OUTPUT_PP (1) #define STM_MODE_OUTPUT_OD (2) #define STM_MODE_AF_PP (3) #define STM_MODE_AF_OD (4) #define STM_MODE_ANALOG (5) #define STM_MODE_IT_RISING (6) #define STM_MODE_IT_FALLING (7) #define STM_MODE_IT_RISING_FALLING (8) #define STM_MODE_EVT_RISING (9) #define STM_MODE_EVT_FALLING (10) #define STM_MODE_EVT_RISING_FALLING (11) #define STM_MODE_IT_EVT_RESET (12) // High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H) // Low nibble = pin number #define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF) #define STM_PIN(X) ((uint32_t)(X) & 0xF) typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; typedef enum { // Not connected NC = (int)0xFFFFFFFF, // Ports PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03, PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07, PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B, PA_12 = 0x0C, PA_13 = NC, PA_14 = NC, PA_15 = 0x0F, PB_0 = 0x10, PB_1 = 0x11, PB_2 = NC, PB_3 = 0x13, PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17, PB_8 = 0x18, PB_9 = 0x19, PB_10 = 0x1A, PB_11 = 0x1B, PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F, PC_0 = NC, PC_1 = NC, PC_2 = NC, PC_3 = NC, PC_4 = NC, PC_5 = NC, PC_6 = NC, PC_7 = NC, PC_8 = NC, PC_9 = NC, PC_10 = NC, PC_11 = NC, PC_12 = NC, PC_13 = 0x2D, PC_14 = 0x2E, PC_15 = 0x2F, PD_2 = NC, // ADC internal channels ADC_TEMP = 0xF0, ADC_VREF = 0xF1, // Arduino connector namings A0 = PA_0, A1 = PA_1, A2 = PA_4, A3 = PB_0, A4 = NC, A5 = NC, D0 = PA_3, D1 = PA_2, D2 = PA_10, D3 = PB_3, D4 = PB_5, D5 = PB_4, D6 = PB_10, D7 = PA_8, D8 = PA_9, D9 = NC, D10 = PB_6, D11 = PA_7, D12 = PA_6, D13 = PA_5, D14 = PB_9, D15 = PB_8, // Generic signals namings LED1 = PC_13, LED2 = NC, LED3 = NC, LED4 = NC, USER_BUTTON = NC, SERIAL_TX = PA_2, SERIAL_RX = PA_3, USBTX = PA_2, USBRX = PA_3, I2C_SCL = PB_8, I2C_SDA = PB_9, SPI_MOSI = PA_7, SPI_MISO = PA_6, SPI_SCK = PA_5, SPI_CS = PB_6, PWM_OUT = PB_3 } PinName; typedef enum { PullNone = 0, PullUp = 1, PullDown = 2, OpenDrain = 3, PullDefault = PullNone } PinMode; #ifdef __cplusplus } #endif #endif