Diff: PreampTDA7419.h

Revision:

2:34a58356394c

Parent:

1:69c37f1ab7df

--- a/PreampTDA7419.h	Mon Oct 20 05:54:52 2014 +0000
+++ b/PreampTDA7419.h	Sun Oct 26 22:49:34 2014 +0000
@@ -14,11 +14,6 @@
 // I2C address for TDA7419
 #define TDA7419_ADDRESS      0x44 
  
-#define DEC 10
-#define HEX 16
-#define OCT 8
-#define BIN 2
- 
  /** TDA7419 PreAmp library
  *
  * Includes the commands for volume, fader, subwoofer and tone controls
@@ -27,44 +22,118 @@
 class PreampTDA7419 {
 public:
  
-    /** Create a new Digole Serial Display interface
+    /** Create a new TDA7419 communication interface
      *
      * @param sda is the pin for I2C SDA
      * @param scl is the pin for I2C SCL
-     * @param address is the 7-bit address (default is 0x27 for the device)
      */
     PreampTDA7419(PinName sda, PinName scl);
- 
-    /** Sets a new I2C address for the Preamp board (perhaps not useful as it is fixed for the TDA4719)
-     * @param address is the the new address 
-     */
-    void setI2CAddress(uint8_t add);
-    
-    /** Set up the TDA7419 to default values that will allow audio to pass through the device
-     * 
-     */
-    void initialize();
-    int i2c_write(int command, int value);
-    
-     /** Set up the TDA7419 to default values that will allow audio to pass through the device
-     * 
-     */
+
+    /** Directly set the TDA7419 Master volume (0->11)
+    * 
+    */
     void setVolume  (int volume);
+    /** Read the the TDA7419 Master volume (0->11)
+    * 
+    */    
     int  readVolume ();
+    /** Increase the current volume (if below 11) 
+    * 
+    */        
     int  increaseVolume();
+    /** Decrease the current volume (if more than 0) 
+    * 
+    */         
     int  decreaseVolume();
+    /** Select the input (1->4) 
+    *   Stereo inputs are 1->3 
+    */          
     void setInput   (int input);
+    /** Read currently selected input
+    *  
+    */           
     int  readInput  ();
 
+    /** Increase treble level (-5 -> 5)
+    *  
+    */        
     int  increaseTreble();
+    /** Decrease treble level (-5 -> 5)
+    *  
+    */        
     int  decreaseTreble();
+    /** Read currently set treble level
+    *  
+    */            
     int  readTreble    ();
+    
+    /** Increase middle level (-5 -> 5)
+    *  
+    */       
+    int  increaseMiddle();
+    /** Decrease middle level (-5 -> 5)
+    *  
+    */      
+    int  decreaseMiddle();
+    /** Read currently set middle level
+    *  
+    */        
+    int  readMiddle    ();
+
+    /** Increase Bass level (-5 -> 5)
+    *  
+    */           
+    int  increaseBass();
+    /** Decrease bass level (-5 -> 5)
+    *  
+    */        
+    int  decreaseBass();
+    /** Read currently set middle level
+    *  
+    */    
+    int  readBass    ();    
+    
+    /** Adjust the volume of each channel attenuator
+    * 
+    *  @param speakerNumber  
+    *        1 - left front,
+    *        2 - right front,
+    *        3 - back left,
+    *        4 - back right,
+    *        5 - subwoofer,
+    *        6 - volume of mix channel
+    */          
+    int  increaseSpeaker (int speakerNumber);
+    /** Adjust the volume of each channel attenuator
+    * 
+    *  @param speakerNumber  
+    *        1 - left front,
+    *        2 - right front,
+    *        3 - back left,
+    *        4 - back right,
+    *        5 - subwoofer,
+    *        6 - volume of mix channel
+    */              
+    int  decreaseSpeaker (int speakerNumber);
+    
+    /** Read the value that is currently set for each attenuator
+    *  @param speakerNumber  match the increase and decrease parameter values
+    */
+    int  readSpeaker     (int speakerNumber);
+    
+    /** Enable the mix input (by default this mixes to the front two channels 
+    * @return The return is the state of the mix (1 = on, 0 = 0ff) after this call
+    */
+    int toggleMix();
+    
+    /** Read if Mix is enabled or not
+    * @return The return is the state of the mix (1 = on, 0 = 0ff) after this call
+    */    
+    int readMix();
 
 private:
     // Signals related to I2C communication
     I2C _device;
-    uint8_t _address;
-    uint8_t _Comdelay;
     
     ////////////////////////////////////
     // register addresses for TDA7419 //
@@ -97,9 +166,9 @@
     int _atten_rr;
     int _atten_mix;
     int _atten_sub;
-
-    void writeToTDA7419     (int address, int value);
-    int  calcAttenuationReg (int attenuation);
+    
+    void writeToTDA7419     (int command, int value);
+    void setAttenuationReg  (int regAddr, int attenuation);
     int  calcToneAttenuationReg(int attenuation);
     void updateTDA7419Reg();