BLE_API - High level Bluetooth Low Energy API and radio abs…

Users » cordonn2 » Code » BLE_API

High level Bluetooth Low Energy API and radio abstraction layer

Fork of BLE_API by Bluetooth Low Energy

public/BLE.h@538:fff02872b62f, 2015-06-19 (annotated)

Committer:: rgrover1
Date:: Fri Jun 19 15:52:08 2015 +0100
Revision:: 538:fff02872b62f
Parent:: 537:00d5affbb2b2
Child:: 539:0b6e82025358

Synchronized with git rev 42aaf6bb

Author: Rohit Grover

add BLE::gattServer()

Who changed what in which revision?

User	Revision	Line number	New contents of line
rgrover1	528:8d21604fe31d	1	/* mbed Microcontroller Library
rgrover1	528:8d21604fe31d	2	* Copyright (c) 2006-2013 ARM Limited
rgrover1	528:8d21604fe31d	3	*
rgrover1	528:8d21604fe31d	4	* Licensed under the Apache License, Version 2.0 (the "License");
rgrover1	528:8d21604fe31d	5	* you may not use this file except in compliance with the License.
rgrover1	528:8d21604fe31d	6	* You may obtain a copy of the License at
rgrover1	528:8d21604fe31d	7	*
rgrover1	528:8d21604fe31d	8	* http://www.apache.org/licenses/LICENSE-2.0
rgrover1	528:8d21604fe31d	9	*
rgrover1	528:8d21604fe31d	10	* Unless required by applicable law or agreed to in writing, software
rgrover1	528:8d21604fe31d	11	* distributed under the License is distributed on an "AS IS" BASIS,
rgrover1	528:8d21604fe31d	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1	528:8d21604fe31d	13	* See the License for the specific language governing permissions and
rgrover1	528:8d21604fe31d	14	* limitations under the License.
rgrover1	528:8d21604fe31d	15	*/
rgrover1	528:8d21604fe31d	16
rgrover1	528:8d21604fe31d	17	#ifndef __BLE_H__
rgrover1	528:8d21604fe31d	18	#define __BLE_H__
rgrover1	528:8d21604fe31d	19
rgrover1	528:8d21604fe31d	20	#include "blecommon.h"
rgrover1	528:8d21604fe31d	21	#include "Gap.h"
rgrover1	528:8d21604fe31d	22	#include "GattServer.h"
rgrover1	528:8d21604fe31d	23	#include "GattClient.h"
rgrover1	528:8d21604fe31d	24	#include "BLEInstanceBase.h"
rgrover1	528:8d21604fe31d	25
rgrover1	528:8d21604fe31d	26	/**
rgrover1	528:8d21604fe31d	27	* The base class used to abstract away BLE capable radio transceivers or SOCs,
rgrover1	528:8d21604fe31d	28	* to enable this BLE API to work with any radio transparently.
rgrover1	528:8d21604fe31d	29	*/
rgrover1	528:8d21604fe31d	30	class BLE
rgrover1	528:8d21604fe31d	31	{
rgrover1	528:8d21604fe31d	32	public:
rgrover1	528:8d21604fe31d	33	/**
rgrover1	528:8d21604fe31d	34	* Initialize the BLE controller. This should be called before using
rgrover1	528:8d21604fe31d	35	* anything else in the BLE_API.
rgrover1	528:8d21604fe31d	36	*
rgrover1	528:8d21604fe31d	37	* init() hands control to the underlying BLE module to accomplish
rgrover1	528:8d21604fe31d	38	* initialization. This initialization may tacitly depend on other hardware
rgrover1	528:8d21604fe31d	39	* setup (such as clocks or power-modes) which happens early on during
rgrover1	528:8d21604fe31d	40	* system startup. It may not be safe to call init() from global static
rgrover1	528:8d21604fe31d	41	* context where ordering is compiler specific and can't be guaranteed--it
rgrover1	528:8d21604fe31d	42	* is safe to call BLE::init() from within main().
rgrover1	528:8d21604fe31d	43	*/
rgrover1	528:8d21604fe31d	44	ble_error_t init();
rgrover1	528:8d21604fe31d	45
rgrover1	537:00d5affbb2b2	46	/**
rgrover1	537:00d5affbb2b2	47	* Purge the BLE stack of GATT and GAP state. init() must be called
rgrover1	537:00d5affbb2b2	48	* afterwards to re-instate services and GAP state. This API offers a way to
rgrover1	537:00d5affbb2b2	49	* repopulate the GATT database with new services and characteristics.
rgrover1	537:00d5affbb2b2	50	*/
rgrover1	537:00d5affbb2b2	51	ble_error_t shutdown(void) {
rgrover1	537:00d5affbb2b2	52	clearAdvertisingPayload();
rgrover1	537:00d5affbb2b2	53	return transport->shutdown();
rgrover1	537:00d5affbb2b2	54	}
rgrover1	528:8d21604fe31d	55
rgrover1	528:8d21604fe31d	56	/**
rgrover1	537:00d5affbb2b2	57	* This call allows the application to get the BLE stack version information.
rgrover1	537:00d5affbb2b2	58	*
rgrover1	537:00d5affbb2b2	59	* @return A pointer to a const string representing the version.
rgrover1	537:00d5affbb2b2	60	* Note: The string is owned by the BLE_API.
rgrover1	528:8d21604fe31d	61	*/
rgrover1	537:00d5affbb2b2	62	const char *getVersion(void) {
rgrover1	537:00d5affbb2b2	63	return transport->getVersion();
rgrover1	537:00d5affbb2b2	64	}
rgrover1	528:8d21604fe31d	65
rgrover1	537:00d5affbb2b2	66	/*
rgrover1	537:00d5affbb2b2	67	* Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
rgrover1	537:00d5affbb2b2	68	* going through this accessor.
rgrover1	537:00d5affbb2b2	69	*/
rgrover1	529:ccfae9d8e56e	70	const Gap &gap() const {
rgrover1	529:ccfae9d8e56e	71	return transport->getGap();
rgrover1	529:ccfae9d8e56e	72	}
rgrover1	529:ccfae9d8e56e	73	Gap &gap() {
rgrover1	529:ccfae9d8e56e	74	return transport->getGap();
rgrover1	529:ccfae9d8e56e	75	}
rgrover1	529:ccfae9d8e56e	76
rgrover1	538:fff02872b62f	77	/*
rgrover1	538:fff02872b62f	78	* Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
rgrover1	538:fff02872b62f	79	* functionality requires going through this accessor.
rgrover1	538:fff02872b62f	80	*/
rgrover1	538:fff02872b62f	81	const GattServer& gattServer() const {
rgrover1	538:fff02872b62f	82	return transport->getGattServer();
rgrover1	538:fff02872b62f	83	}
rgrover1	538:fff02872b62f	84	GattServer& gattServer() {
rgrover1	538:fff02872b62f	85	return transport->getGattServer();
rgrover1	538:fff02872b62f	86	}
rgrover1	538:fff02872b62f	87
rgrover1	537:00d5affbb2b2	88	/**
rgrover1	537:00d5affbb2b2	89	* Yield control to the BLE stack or to other tasks waiting for events. This
rgrover1	537:00d5affbb2b2	90	* is a sleep function which will return when there is an application
rgrover1	537:00d5affbb2b2	91	* specific interrupt, but the MCU might wake up several times before
rgrover1	537:00d5affbb2b2	92	* returning (to service the stack). This is not always interchangeable with
rgrover1	537:00d5affbb2b2	93	* WFE().
rgrover1	537:00d5affbb2b2	94	*/
rgrover1	537:00d5affbb2b2	95	void waitForEvent(void) {
rgrover1	537:00d5affbb2b2	96	transport->waitForEvent();
rgrover1	537:00d5affbb2b2	97	}
rgrover1	537:00d5affbb2b2	98
rgrover1	537:00d5affbb2b2	99	/*
rgrover1	537:00d5affbb2b2	100	* Deprecation alert!
rgrover1	537:00d5affbb2b2	101	* All of the following are deprecated and may be dropped in a future
rgrover1	537:00d5affbb2b2	102	* release. Documentation should refer to alternative APIs.
rgrover1	537:00d5affbb2b2	103	*/
rgrover1	537:00d5affbb2b2	104
rgrover1	537:00d5affbb2b2	105	/* GAP specific APIs. */
rgrover1	531:bdcd44b03974	106	public:
rgrover1	528:8d21604fe31d	107	/**
rgrover1	528:8d21604fe31d	108	* Set the BTLE MAC address and type.
rgrover1	528:8d21604fe31d	109	* @return BLE_ERROR_NONE on success.
rgrover1	537:00d5affbb2b2	110	*
rgrover1	537:00d5affbb2b2	111	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	112	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	113	* ble.setAddress(...) should be replaced with
rgrover1	537:00d5affbb2b2	114	* ble.gap().setAddress(...).
rgrover1	528:8d21604fe31d	115	*/
rgrover1	537:00d5affbb2b2	116	ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
rgrover1	537:00d5affbb2b2	117	return gap().setAddress(type, address);
rgrover1	537:00d5affbb2b2	118	}
rgrover1	528:8d21604fe31d	119
rgrover1	528:8d21604fe31d	120	/**
rgrover1	528:8d21604fe31d	121	* Fetch the BTLE MAC address and type.
rgrover1	528:8d21604fe31d	122	* @return BLE_ERROR_NONE on success.
rgrover1	537:00d5affbb2b2	123	*
rgrover1	537:00d5affbb2b2	124	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	125	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	126	* ble.getAddress(...) should be replaced with
rgrover1	537:00d5affbb2b2	127	* ble.gap().getAddress(...).
rgrover1	528:8d21604fe31d	128	*/
rgrover1	537:00d5affbb2b2	129	ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
rgrover1	537:00d5affbb2b2	130	return gap().getAddress(typeP, address);
rgrover1	537:00d5affbb2b2	131	}
rgrover1	528:8d21604fe31d	132
rgrover1	528:8d21604fe31d	133	/**
rgrover1	537:00d5affbb2b2	134	* Set the GAP advertising mode to use for this device.
rgrover1	528:8d21604fe31d	135	*
rgrover1	537:00d5affbb2b2	136	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	137	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	138	* ble.setAdvertisingType(...) should be replaced with
rgrover1	537:00d5affbb2b2	139	* ble.gap().setAdvertisingType(...).
rgrover1	528:8d21604fe31d	140	*/
rgrover1	537:00d5affbb2b2	141	void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
rgrover1	537:00d5affbb2b2	142	gap().setAdvertisingType(advType);
rgrover1	537:00d5affbb2b2	143	}
rgrover1	528:8d21604fe31d	144
rgrover1	528:8d21604fe31d	145	/**
rgrover1	528:8d21604fe31d	146	* @param[in] interval
rgrover1	528:8d21604fe31d	147	* Advertising interval in units of milliseconds. Advertising
rgrover1	528:8d21604fe31d	148	* is disabled if interval is 0. If interval is smaller than
rgrover1	528:8d21604fe31d	149	* the minimum supported value, then the minimum supported
rgrover1	537:00d5affbb2b2	150	* value is used instead. This minimum value can be discovered
rgrover1	537:00d5affbb2b2	151	* using getMinAdvertisingInterval().
rgrover1	528:8d21604fe31d	152	*
rgrover1	537:00d5affbb2b2	153	* This field must be set to 0 if connectionMode is equal
rgrover1	537:00d5affbb2b2	154	* to ADV_CONNECTABLE_DIRECTED.
rgrover1	528:8d21604fe31d	155	*
rgrover1	537:00d5affbb2b2	156	* @note: Decreasing this value will allow central devices to detect a
rgrover1	537:00d5affbb2b2	157	* peripheral faster at the expense of more power being used by the radio
rgrover1	537:00d5affbb2b2	158	* due to the higher data transmit rate.
rgrover1	528:8d21604fe31d	159	*
rgrover1	537:00d5affbb2b2	160	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	161	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	162	* ble.setAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	163	* ble.gap().setAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	164	*
rgrover1	537:00d5affbb2b2	165	* @note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1	528:8d21604fe31d	166	* 'interval' argument. That required an explicit conversion from
rgrover1	528:8d21604fe31d	167	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1	528:8d21604fe31d	168	* no longer required as the new units are milliseconds. Any application
rgrover1	528:8d21604fe31d	169	* code depending on the old semantics would need to be updated accordingly.
rgrover1	528:8d21604fe31d	170	*/
rgrover1	537:00d5affbb2b2	171	void setAdvertisingInterval(uint16_t interval) {
rgrover1	537:00d5affbb2b2	172	gap().setAdvertisingInterval(interval);
rgrover1	537:00d5affbb2b2	173	}
rgrover1	528:8d21604fe31d	174
rgrover1	528:8d21604fe31d	175	/**
rgrover1	528:8d21604fe31d	176	* @return Minimum Advertising interval in milliseconds.
rgrover1	537:00d5affbb2b2	177	*
rgrover1	537:00d5affbb2b2	178	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	179	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	180	* ble.getMinAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	181	* ble.gap().getMinAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	182	*/
rgrover1	537:00d5affbb2b2	183	uint16_t getMinAdvertisingInterval(void) const {
rgrover1	537:00d5affbb2b2	184	return gap().getMinAdvertisingInterval();
rgrover1	537:00d5affbb2b2	185	}
rgrover1	537:00d5affbb2b2	186
rgrover1	528:8d21604fe31d	187	/**
rgrover1	537:00d5affbb2b2	188	* @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1	537:00d5affbb2b2	189	*
rgrover1	537:00d5affbb2b2	190	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	191	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	192	* ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	193	* ble.gap().getMinNonConnectableAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	194	*/
rgrover1	537:00d5affbb2b2	195	uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1	537:00d5affbb2b2	196	return gap().getMinNonConnectableAdvertisingInterval();
rgrover1	537:00d5affbb2b2	197	}
rgrover1	537:00d5affbb2b2	198
rgrover1	528:8d21604fe31d	199	/**
rgrover1	528:8d21604fe31d	200	* @return Maximum Advertising interval in milliseconds.
rgrover1	537:00d5affbb2b2	201	*
rgrover1	537:00d5affbb2b2	202	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	203	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	204	* ble.getMaxAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	205	* ble.gap().getMaxAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	206	*/
rgrover1	537:00d5affbb2b2	207	uint16_t getMaxAdvertisingInterval(void) const {
rgrover1	537:00d5affbb2b2	208	return gap().getMaxAdvertisingInterval();
rgrover1	537:00d5affbb2b2	209	}
rgrover1	528:8d21604fe31d	210
rgrover1	528:8d21604fe31d	211	/**
rgrover1	528:8d21604fe31d	212	* @param[in] timeout
rgrover1	537:00d5affbb2b2	213	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1	537:00d5affbb2b2	214	* and 16383). Use 0 to disable the advertising timeout.
rgrover1	537:00d5affbb2b2	215	*
rgrover1	537:00d5affbb2b2	216	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	217	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	218	* ble.setAdvertisingTimeout(...) should be replaced with
rgrover1	537:00d5affbb2b2	219	* ble.gap().setAdvertisingTimeout(...).
rgrover1	528:8d21604fe31d	220	*/
rgrover1	537:00d5affbb2b2	221	void setAdvertisingTimeout(uint16_t timeout) {
rgrover1	537:00d5affbb2b2	222	gap().setAdvertisingTimeout(timeout);
rgrover1	537:00d5affbb2b2	223	}
rgrover1	528:8d21604fe31d	224
rgrover1	528:8d21604fe31d	225	/**
rgrover1	537:00d5affbb2b2	226	* Setup a particular, user-constructed set of advertisement parameters for
rgrover1	537:00d5affbb2b2	227	* the underlying stack. It would be uncommon for this API to be used
rgrover1	537:00d5affbb2b2	228	* directly; there are other APIs to tweak advertisement parameters
rgrover1	537:00d5affbb2b2	229	* individually (see above).
rgrover1	537:00d5affbb2b2	230	*
rgrover1	537:00d5affbb2b2	231	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	232	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	233	* ble.setAdvertisingParams(...) should be replaced with
rgrover1	537:00d5affbb2b2	234	* ble.gap().setAdvertisingParams(...).
rgrover1	528:8d21604fe31d	235	*/
rgrover1	537:00d5affbb2b2	236	void setAdvertisingParams(const GapAdvertisingParams &advParams) {
rgrover1	537:00d5affbb2b2	237	gap().setAdvertisingParams(advParams);
rgrover1	537:00d5affbb2b2	238	}
rgrover1	528:8d21604fe31d	239
rgrover1	528:8d21604fe31d	240	/**
rgrover1	528:8d21604fe31d	241	* @return Read back advertising parameters. Useful for storing and
rgrover1	528:8d21604fe31d	242	* restoring parameters rapidly.
rgrover1	537:00d5affbb2b2	243	*
rgrover1	537:00d5affbb2b2	244	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	245	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	246	* ble.getAdvertisingParams(...) should be replaced with
rgrover1	537:00d5affbb2b2	247	* ble.gap().getAdvertisingParams(...).
rgrover1	528:8d21604fe31d	248	*/
rgrover1	537:00d5affbb2b2	249	const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1	537:00d5affbb2b2	250	return gap().getAdvertisingParams();
rgrover1	537:00d5affbb2b2	251	}
rgrover1	528:8d21604fe31d	252
rgrover1	528:8d21604fe31d	253	/**
rgrover1	528:8d21604fe31d	254	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	528:8d21604fe31d	255	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	528:8d21604fe31d	256	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	528:8d21604fe31d	257	* small.
rgrover1	528:8d21604fe31d	258	*
rgrover1	537:00d5affbb2b2	259	* @param[in] flags
rgrover1	537:00d5affbb2b2	260	* The flags to be added. Please refer to
rgrover1	537:00d5affbb2b2	261	* GapAdvertisingData::Flags for valid flags. Multiple
rgrover1	537:00d5affbb2b2	262	* flags may be specified in combination.
rgrover1	537:00d5affbb2b2	263	*
rgrover1	537:00d5affbb2b2	264	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	265	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	266	* ble.accumulateAdvertisingPayload(flags) should be replaced with
rgrover1	537:00d5affbb2b2	267	* ble.gap().accumulateAdvertisingPayload(flags).
rgrover1	528:8d21604fe31d	268	*/
rgrover1	537:00d5affbb2b2	269	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1	537:00d5affbb2b2	270	return gap().accumulateAdvertisingPayload(flags);
rgrover1	537:00d5affbb2b2	271	}
rgrover1	528:8d21604fe31d	272
rgrover1	528:8d21604fe31d	273	/**
rgrover1	528:8d21604fe31d	274	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	528:8d21604fe31d	275	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	528:8d21604fe31d	276	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	528:8d21604fe31d	277	* small.
rgrover1	528:8d21604fe31d	278	*
rgrover1	537:00d5affbb2b2	279	* @param[in] app
rgrover1	537:00d5affbb2b2	280	* The appearance of the peripheral.
rgrover1	537:00d5affbb2b2	281	*
rgrover1	537:00d5affbb2b2	282	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	283	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	284	* ble.accumulateAdvertisingPayload(appearance) should be replaced with
rgrover1	537:00d5affbb2b2	285	* ble.gap().accumulateAdvertisingPayload(appearance).
rgrover1	528:8d21604fe31d	286	*/
rgrover1	537:00d5affbb2b2	287	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1	537:00d5affbb2b2	288	return gap().accumulateAdvertisingPayload(app);
rgrover1	537:00d5affbb2b2	289	}
rgrover1	528:8d21604fe31d	290
rgrover1	528:8d21604fe31d	291	/**
rgrover1	528:8d21604fe31d	292	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	528:8d21604fe31d	293	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	528:8d21604fe31d	294	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	528:8d21604fe31d	295	* small.
rgrover1	528:8d21604fe31d	296	*
rgrover1	537:00d5affbb2b2	297	* @param[in] app
rgrover1	537:00d5affbb2b2	298	* The max transmit power to be used by the controller. This
rgrover1	537:00d5affbb2b2	299	* is only a hint.
rgrover1	537:00d5affbb2b2	300	*
rgrover1	537:00d5affbb2b2	301	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	302	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	303	* ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
rgrover1	537:00d5affbb2b2	304	* ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
rgrover1	528:8d21604fe31d	305	*/
rgrover1	537:00d5affbb2b2	306	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1	537:00d5affbb2b2	307	return gap().accumulateAdvertisingPayloadTxPower(power);
rgrover1	537:00d5affbb2b2	308	}
rgrover1	528:8d21604fe31d	309
rgrover1	528:8d21604fe31d	310	/**
rgrover1	528:8d21604fe31d	311	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	528:8d21604fe31d	312	* advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1	528:8d21604fe31d	313	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1	528:8d21604fe31d	314	* advertising payload proves to be too small.
rgrover1	528:8d21604fe31d	315	*
rgrover1	528:8d21604fe31d	316	* @param type The type which describes the variable length data.
rgrover1	528:8d21604fe31d	317	* @param data data bytes.
rgrover1	528:8d21604fe31d	318	* @param len length of data.
rgrover1	537:00d5affbb2b2	319	*
rgrover1	537:00d5affbb2b2	320	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	321	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	322	* ble.accumulateAdvertisingPayload(...) should be replaced with
rgrover1	537:00d5affbb2b2	323	* ble.gap().accumulateAdvertisingPayload(...).
rgrover1	528:8d21604fe31d	324	*/
rgrover1	537:00d5affbb2b2	325	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	537:00d5affbb2b2	326	return gap().accumulateAdvertisingPayload(type, data, len);
rgrover1	537:00d5affbb2b2	327	}
rgrover1	537:00d5affbb2b2	328
rgrover1	537:00d5affbb2b2	329	/**
rgrover1	537:00d5affbb2b2	330	* Setup a particular, user-constructed advertisement payload for the
rgrover1	537:00d5affbb2b2	331	* underlying stack. It would be uncommon for this API to be used directly;
rgrover1	537:00d5affbb2b2	332	* there are other APIs to build an advertisement payload (see above).
rgrover1	537:00d5affbb2b2	333	*
rgrover1	537:00d5affbb2b2	334	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	335	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	336	* ble.setAdvertisingData(...) should be replaced with
rgrover1	537:00d5affbb2b2	337	* ble.gap().setAdvertisingPayload(...).
rgrover1	537:00d5affbb2b2	338	*/
rgrover1	537:00d5affbb2b2	339	ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
rgrover1	537:00d5affbb2b2	340	return gap().setAdvertisingPayload(advData);
rgrover1	537:00d5affbb2b2	341	}
rgrover1	537:00d5affbb2b2	342
rgrover1	537:00d5affbb2b2	343	/**
rgrover1	537:00d5affbb2b2	344	* @return Read back advertising data. Useful for storing and
rgrover1	537:00d5affbb2b2	345	* restoring payload.
rgrover1	537:00d5affbb2b2	346	*
rgrover1	537:00d5affbb2b2	347	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	348	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	349	* ble.getAdvertisingData(...) should be replaced with
rgrover1	537:00d5affbb2b2	350	* ble.gap().getAdvertisingPayload()(...).
rgrover1	537:00d5affbb2b2	351	*/
rgrover1	537:00d5affbb2b2	352	const GapAdvertisingData &getAdvertisingData(void) const {
rgrover1	537:00d5affbb2b2	353	return gap().getAdvertisingPayload();
rgrover1	537:00d5affbb2b2	354	}
rgrover1	537:00d5affbb2b2	355
rgrover1	537:00d5affbb2b2	356	/**
rgrover1	537:00d5affbb2b2	357	* Reset any advertising payload prepared from prior calls to
rgrover1	537:00d5affbb2b2	358	* accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1	537:00d5affbb2b2	359	* initialized adv payload to the underlying stack.
rgrover1	537:00d5affbb2b2	360	*
rgrover1	537:00d5affbb2b2	361	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	362	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	363	* ble.clearAdvertisingPayload(...) should be replaced with
rgrover1	537:00d5affbb2b2	364	* ble.gap().clearAdvertisingPayload(...).
rgrover1	537:00d5affbb2b2	365	*/
rgrover1	537:00d5affbb2b2	366	void clearAdvertisingPayload(void) {
rgrover1	537:00d5affbb2b2	367	gap().clearAdvertisingPayload();
rgrover1	537:00d5affbb2b2	368	}
rgrover1	537:00d5affbb2b2	369
rgrover1	537:00d5affbb2b2	370	/**
rgrover1	537:00d5affbb2b2	371	* This API is deprecated and resolves to a no-operation. It is left here
rgrover1	537:00d5affbb2b2	372	* to allow older code to compile. Please avoid using this API in new code.
rgrover1	537:00d5affbb2b2	373	* This API will be dropped in a future release.
rgrover1	537:00d5affbb2b2	374	*
rgrover1	537:00d5affbb2b2	375	* Formerly, it would be used to dynamically reset the accumulated advertising
rgrover1	537:00d5affbb2b2	376	* payload and scanResponse; to do this, the application would clear and re-
rgrover1	537:00d5affbb2b2	377	* accumulate a new advertising payload (and scanResponse) before using this
rgrover1	537:00d5affbb2b2	378	* API. Updates to the underlying advertisement payload now happen
rgrover1	537:00d5affbb2b2	379	* implicitly.
rgrover1	537:00d5affbb2b2	380	*/
rgrover1	537:00d5affbb2b2	381	ble_error_t setAdvertisingPayload(void) {
rgrover1	537:00d5affbb2b2	382	return BLE_ERROR_NONE;
rgrover1	537:00d5affbb2b2	383	}
rgrover1	528:8d21604fe31d	384
rgrover1	528:8d21604fe31d	385	/**
rgrover1	528:8d21604fe31d	386	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	528:8d21604fe31d	387	* scanResponse payload.
rgrover1	528:8d21604fe31d	388	*
rgrover1	537:00d5affbb2b2	389	* @param[in] type The type which describes the variable length data.
rgrover1	537:00d5affbb2b2	390	* @param[in] data data bytes.
rgrover1	537:00d5affbb2b2	391	* @param[in] len length of data.
rgrover1	537:00d5affbb2b2	392	*
rgrover1	537:00d5affbb2b2	393	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	394	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	395	* ble.accumulateScanResponse(...) should be replaced with
rgrover1	537:00d5affbb2b2	396	* ble.gap().accumulateScanResponse(...).
rgrover1	528:8d21604fe31d	397	*/
rgrover1	537:00d5affbb2b2	398	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	537:00d5affbb2b2	399	return gap().accumulateScanResponse(type, data, len);
rgrover1	537:00d5affbb2b2	400	}
rgrover1	528:8d21604fe31d	401
rgrover1	528:8d21604fe31d	402	/**
rgrover1	528:8d21604fe31d	403	* Reset any scan response prepared from prior calls to
rgrover1	528:8d21604fe31d	404	* accumulateScanResponse().
rgrover1	528:8d21604fe31d	405	*
rgrover1	537:00d5affbb2b2	406	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	407	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	408	* ble.clearScanResponse(...) should be replaced with
rgrover1	537:00d5affbb2b2	409	* ble.gap().clearScanResponse(...).
rgrover1	528:8d21604fe31d	410	*/
rgrover1	537:00d5affbb2b2	411	void clearScanResponse(void) {
rgrover1	537:00d5affbb2b2	412	gap().clearScanResponse();
rgrover1	537:00d5affbb2b2	413	}
rgrover1	528:8d21604fe31d	414
rgrover1	528:8d21604fe31d	415	/**
rgrover1	537:00d5affbb2b2	416	* Start advertising.
rgrover1	537:00d5affbb2b2	417	*
rgrover1	537:00d5affbb2b2	418	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	419	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	420	* ble.startAdvertising(...) should be replaced with
rgrover1	537:00d5affbb2b2	421	* ble.gap().startAdvertising(...).
rgrover1	528:8d21604fe31d	422	*/
rgrover1	537:00d5affbb2b2	423	ble_error_t startAdvertising(void) {
rgrover1	537:00d5affbb2b2	424	/* HACK ALERT! the following bit with initializeGATTDatabase() is additional to
rgrover1	537:00d5affbb2b2	425	* gap().startAdvertising(). This was put in place to get some stacks to
rgrover1	537:00d5affbb2b2	426	* work--like CSR. We need to reach a point where this shouldn't be
rgrover1	537:00d5affbb2b2	427	* necessary. */
rgrover1	537:00d5affbb2b2	428	ble_error_t rc;
rgrover1	537:00d5affbb2b2	429	if ((rc = transport->getGattServer().initializeGATTDatabase()) != BLE_ERROR_NONE) {
rgrover1	537:00d5affbb2b2	430	return rc;
rgrover1	537:00d5affbb2b2	431	}
rgrover1	537:00d5affbb2b2	432
rgrover1	537:00d5affbb2b2	433	return gap().startAdvertising();
rgrover1	537:00d5affbb2b2	434	}
rgrover1	528:8d21604fe31d	435
rgrover1	528:8d21604fe31d	436	/**
rgrover1	537:00d5affbb2b2	437	* Stop advertising.
rgrover1	537:00d5affbb2b2	438	*
rgrover1	537:00d5affbb2b2	439	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	440	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	441	* ble.stopAdvertising(...) should be replaced with
rgrover1	537:00d5affbb2b2	442	* ble.gap().stopAdvertising(...).
rgrover1	528:8d21604fe31d	443	*/
rgrover1	537:00d5affbb2b2	444	ble_error_t stopAdvertising(void) {
rgrover1	537:00d5affbb2b2	445	return gap().stopAdvertising();
rgrover1	537:00d5affbb2b2	446	}
rgrover1	528:8d21604fe31d	447
rgrover1	528:8d21604fe31d	448	/**
rgrover1	528:8d21604fe31d	449	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	450	* @param[in] interval
rgrover1	537:00d5affbb2b2	451	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	452	* @param[in] window
rgrover1	537:00d5affbb2b2	453	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	454	* @param[in] timeout
rgrover1	537:00d5affbb2b2	455	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	537:00d5affbb2b2	456	* @param[in] activeScanning
rgrover1	537:00d5affbb2b2	457	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	537:00d5affbb2b2	458	* scan response from a peer if possible.
rgrover1	528:8d21604fe31d	459	*
rgrover1	528:8d21604fe31d	460	* The scanning window divided by the interval determines the duty cycle for
rgrover1	528:8d21604fe31d	461	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	528:8d21604fe31d	462	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	528:8d21604fe31d	463	* to have the interval and window set to the same value. In this case,
rgrover1	528:8d21604fe31d	464	* scanning is continuous, with a change of scanning frequency once every
rgrover1	528:8d21604fe31d	465	* interval.
rgrover1	528:8d21604fe31d	466	*
rgrover1	528:8d21604fe31d	467	* Once the scanning parameters have been configured, scanning can be
rgrover1	528:8d21604fe31d	468	* enabled by using startScan().
rgrover1	528:8d21604fe31d	469	*
rgrover1	528:8d21604fe31d	470	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	537:00d5affbb2b2	471	*
rgrover1	537:00d5affbb2b2	472	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	473	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	474	* ble.setScanParams(...) should be replaced with
rgrover1	537:00d5affbb2b2	475	* ble.gap().setScanParams(...).
rgrover1	528:8d21604fe31d	476	*/
rgrover1	528:8d21604fe31d	477	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1	528:8d21604fe31d	478	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1	528:8d21604fe31d	479	uint16_t timeout = 0,
rgrover1	537:00d5affbb2b2	480	bool activeScanning = false) {
rgrover1	537:00d5affbb2b2	481	return gap().setScanParams(interval, window, timeout, activeScanning);
rgrover1	537:00d5affbb2b2	482	}
rgrover1	537:00d5affbb2b2	483
rgrover1	537:00d5affbb2b2	484	/**
rgrover1	537:00d5affbb2b2	485	* Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	486	* @param[in] interval
rgrover1	537:00d5affbb2b2	487	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	488	*
rgrover1	537:00d5affbb2b2	489	* The scanning window divided by the interval determines the duty cycle for
rgrover1	537:00d5affbb2b2	490	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	537:00d5affbb2b2	491	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	537:00d5affbb2b2	492	* to have the interval and window set to the same value. In this case,
rgrover1	537:00d5affbb2b2	493	* scanning is continuous, with a change of scanning frequency once every
rgrover1	537:00d5affbb2b2	494	* interval.
rgrover1	537:00d5affbb2b2	495	*
rgrover1	537:00d5affbb2b2	496	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	497	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	498	*
rgrover1	537:00d5affbb2b2	499	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	500	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	501	* ble.setScanInterval(interval) should be replaced with
rgrover1	537:00d5affbb2b2	502	* ble.gap().setScanInterval(interval).
rgrover1	537:00d5affbb2b2	503	*/
rgrover1	537:00d5affbb2b2	504	ble_error_t setScanInterval(uint16_t interval) {
rgrover1	537:00d5affbb2b2	505	return gap().setScanInterval(interval);
rgrover1	537:00d5affbb2b2	506	}
rgrover1	537:00d5affbb2b2	507
rgrover1	537:00d5affbb2b2	508	/**
rgrover1	537:00d5affbb2b2	509	* Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	510	* @param[in] window
rgrover1	537:00d5affbb2b2	511	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	512	*
rgrover1	537:00d5affbb2b2	513	* The scanning window divided by the interval determines the duty cycle for
rgrover1	537:00d5affbb2b2	514	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	537:00d5affbb2b2	515	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	537:00d5affbb2b2	516	* to have the interval and window set to the same value. In this case,
rgrover1	537:00d5affbb2b2	517	* scanning is continuous, with a change of scanning frequency once every
rgrover1	537:00d5affbb2b2	518	* interval.
rgrover1	537:00d5affbb2b2	519	*
rgrover1	537:00d5affbb2b2	520	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	521	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	522	*
rgrover1	537:00d5affbb2b2	523	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	524	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	525	* ble.setScanWindow(window) should be replaced with
rgrover1	537:00d5affbb2b2	526	* ble.gap().setScanWindow(window).
rgrover1	537:00d5affbb2b2	527	*/
rgrover1	537:00d5affbb2b2	528	ble_error_t setScanWindow(uint16_t window) {
rgrover1	537:00d5affbb2b2	529	return gap().setScanWindow(window);
rgrover1	537:00d5affbb2b2	530	}
rgrover1	528:8d21604fe31d	531
rgrover1	528:8d21604fe31d	532	/**
rgrover1	537:00d5affbb2b2	533	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	534	* @param[in] timeout
rgrover1	537:00d5affbb2b2	535	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	537:00d5affbb2b2	536	*
rgrover1	537:00d5affbb2b2	537	* The scanning window divided by the interval determines the duty cycle for
rgrover1	537:00d5affbb2b2	538	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	537:00d5affbb2b2	539	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	537:00d5affbb2b2	540	* to have the interval and window set to the same value. In this case,
rgrover1	537:00d5affbb2b2	541	* scanning is continuous, with a change of scanning frequency once every
rgrover1	537:00d5affbb2b2	542	* interval.
rgrover1	528:8d21604fe31d	543	*
rgrover1	537:00d5affbb2b2	544	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	545	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	546	*
rgrover1	537:00d5affbb2b2	547	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	537:00d5affbb2b2	548	*
rgrover1	537:00d5affbb2b2	549	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	550	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	551	* ble.setScanTimeout(...) should be replaced with
rgrover1	537:00d5affbb2b2	552	* ble.gap().setScanTimeout(...).
rgrover1	528:8d21604fe31d	553	*/
rgrover1	537:00d5affbb2b2	554	ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1	537:00d5affbb2b2	555	return gap().setScanTimeout(timeout);
rgrover1	537:00d5affbb2b2	556	}
rgrover1	528:8d21604fe31d	557
rgrover1	528:8d21604fe31d	558	/**
rgrover1	537:00d5affbb2b2	559	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	560	* @param[in] activeScanning
rgrover1	537:00d5affbb2b2	561	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	537:00d5affbb2b2	562	* scan response from a peer if possible.
rgrover1	537:00d5affbb2b2	563	*
rgrover1	537:00d5affbb2b2	564	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	565	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	566	*
rgrover1	537:00d5affbb2b2	567	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	568	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	569	* ble.setActiveScan(...) should be replaced with
rgrover1	537:00d5affbb2b2	570	* ble.gap().setActiveScanning(...).
rgrover1	537:00d5affbb2b2	571	*/
rgrover1	537:00d5affbb2b2	572	void setActiveScan(bool activeScanning) {
rgrover1	537:00d5affbb2b2	573	gap().setActiveScanning(activeScanning);
rgrover1	537:00d5affbb2b2	574	}
rgrover1	537:00d5affbb2b2	575
rgrover1	537:00d5affbb2b2	576	/**
rgrover1	537:00d5affbb2b2	577	* Start scanning (Observer Procedure) based on the parameters currently in
rgrover1	537:00d5affbb2b2	578	* effect.
rgrover1	528:8d21604fe31d	579	*
rgrover1	537:00d5affbb2b2	580	* @param[in] callback
rgrover1	537:00d5affbb2b2	581	* The application specific callback to be invoked upon
rgrover1	537:00d5affbb2b2	582	* receiving every advertisement report. This can be passed in
rgrover1	537:00d5affbb2b2	583	* as NULL, in which case scanning may not be enabled at all.
rgrover1	537:00d5affbb2b2	584	*
rgrover1	537:00d5affbb2b2	585	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	586	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	587	* ble.startScan(callback) should be replaced with
rgrover1	537:00d5affbb2b2	588	* ble.gap().startScan(callback).
rgrover1	537:00d5affbb2b2	589	*/
rgrover1	537:00d5affbb2b2	590	ble_error_t startScan(void (callback)(const Gap::AdvertisementCallbackParams_t params)) {
rgrover1	537:00d5affbb2b2	591	return gap().startScan(callback);
rgrover1	537:00d5affbb2b2	592	}
rgrover1	537:00d5affbb2b2	593
rgrover1	537:00d5affbb2b2	594	/**
rgrover1	537:00d5affbb2b2	595	* Same as above, but this takes an (object, method) pair for a callback.
rgrover1	537:00d5affbb2b2	596	*
rgrover1	537:00d5affbb2b2	597	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	598	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	599	* ble.startScan(callback) should be replaced with
rgrover1	537:00d5affbb2b2	600	* ble.gap().startScan(object, callback).
rgrover1	528:8d21604fe31d	601	*/
rgrover1	528:8d21604fe31d	602	template<typename T>
rgrover1	528:8d21604fe31d	603	ble_error_t startScan(T object, void (T::memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
rgrover1	528:8d21604fe31d	604
rgrover1	528:8d21604fe31d	605	/**
rgrover1	528:8d21604fe31d	606	* Stop scanning. The current scanning parameters remain in effect.
rgrover1	528:8d21604fe31d	607	*
rgrover1	528:8d21604fe31d	608	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1	537:00d5affbb2b2	609	*
rgrover1	537:00d5affbb2b2	610	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	611	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	612	* ble.stopScan() should be replaced with
rgrover1	537:00d5affbb2b2	613	* ble.gap().stopScan().
rgrover1	528:8d21604fe31d	614	*/
rgrover1	537:00d5affbb2b2	615	ble_error_t stopScan(void) {
rgrover1	537:00d5affbb2b2	616	return gap().stopScan();
rgrover1	537:00d5affbb2b2	617	}
rgrover1	528:8d21604fe31d	618
rgrover1	528:8d21604fe31d	619	/**
rgrover1	528:8d21604fe31d	620	* Create a connection (GAP Link Establishment).
rgrover1	528:8d21604fe31d	621	* @param peerAddr
rgrover1	528:8d21604fe31d	622	* 48-bit address, LSB format.
rgrover1	528:8d21604fe31d	623	* @param peerAddrType
rgrover1	528:8d21604fe31d	624	* Address type of the peer.
rgrover1	528:8d21604fe31d	625	* @param connectionParams
rgrover1	528:8d21604fe31d	626	* Connection parameters.
rgrover1	528:8d21604fe31d	627	* @param scanParams
rgrover1	528:8d21604fe31d	628	* Paramters to be used while scanning for the peer.
rgrover1	528:8d21604fe31d	629	* @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1	528:8d21604fe31d	630	* successfully. The onConnection callback (if set) will be invoked upon
rgrover1	528:8d21604fe31d	631	* a connection event.
rgrover1	537:00d5affbb2b2	632	*
rgrover1	537:00d5affbb2b2	633	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	634	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	635	* ble.connect(...) should be replaced with
rgrover1	537:00d5affbb2b2	636	* ble.gap().connect(...).
rgrover1	528:8d21604fe31d	637	*/
rgrover1	528:8d21604fe31d	638	ble_error_t connect(const Gap::Address_t peerAddr,
rgrover1	528:8d21604fe31d	639	Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
rgrover1	528:8d21604fe31d	640	const Gap::ConnectionParams_t *connectionParams = NULL,
rgrover1	537:00d5affbb2b2	641	const GapScanningParams *scanParams = NULL) {
rgrover1	537:00d5affbb2b2	642	return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
rgrover1	537:00d5affbb2b2	643	}
rgrover1	528:8d21604fe31d	644
rgrover1	528:8d21604fe31d	645	/**
rgrover1	528:8d21604fe31d	646	* This call initiates the disconnection procedure, and its completion will
rgrover1	528:8d21604fe31d	647	* be communicated to the application with an invocation of the
rgrover1	528:8d21604fe31d	648	* onDisconnection callback.
rgrover1	528:8d21604fe31d	649	*
rgrover1	528:8d21604fe31d	650	* @param reason
rgrover1	528:8d21604fe31d	651	* The reason for disconnection to be sent back to the peer.
rgrover1	537:00d5affbb2b2	652	*
rgrover1	537:00d5affbb2b2	653	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	654	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	655	* ble.disconnect(reason) should be replaced with
rgrover1	537:00d5affbb2b2	656	* ble.gap().disconnect(reason).
rgrover1	528:8d21604fe31d	657	*/
rgrover1	537:00d5affbb2b2	658	ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
rgrover1	537:00d5affbb2b2	659	return gap().disconnect(reason);
rgrover1	537:00d5affbb2b2	660	}
rgrover1	537:00d5affbb2b2	661
rgrover1	537:00d5affbb2b2	662	/**
rgrover1	537:00d5affbb2b2	663	* Returns the current GAP state of the device using a bitmask which
rgrover1	537:00d5affbb2b2	664	* describes whether the device is advertising and/or connected.
rgrover1	537:00d5affbb2b2	665	*
rgrover1	537:00d5affbb2b2	666	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	667	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	668	* ble.getGapState() should be replaced with
rgrover1	537:00d5affbb2b2	669	* ble.gap().getState().
rgrover1	537:00d5affbb2b2	670	*/
rgrover1	537:00d5affbb2b2	671	Gap::GapState_t getGapState(void) const {
rgrover1	537:00d5affbb2b2	672	return gap().getState();
rgrover1	537:00d5affbb2b2	673	}
rgrover1	537:00d5affbb2b2	674
rgrover1	537:00d5affbb2b2	675	/**
rgrover1	537:00d5affbb2b2	676	* Get the GAP peripheral preferred connection parameters. These are the
rgrover1	537:00d5affbb2b2	677	* defaults that the peripheral would like to have in a connection. The
rgrover1	537:00d5affbb2b2	678	* choice of the connection parameters is eventually up to the central.
rgrover1	537:00d5affbb2b2	679	*
rgrover1	537:00d5affbb2b2	680	* @param[out] params
rgrover1	537:00d5affbb2b2	681	* The structure where the parameters will be stored. Memory
rgrover1	537:00d5affbb2b2	682	* for this is owned by the caller.
rgrover1	537:00d5affbb2b2	683	*
rgrover1	537:00d5affbb2b2	684	* @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1	537:00d5affbb2b2	685	* the given structure pointed to by params.
rgrover1	537:00d5affbb2b2	686	*
rgrover1	537:00d5affbb2b2	687	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	688	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	689	* ble.getPreferredConnectionParams() should be replaced with
rgrover1	537:00d5affbb2b2	690	* ble.gap().getPreferredConnectionParams().
rgrover1	537:00d5affbb2b2	691	*/
rgrover1	537:00d5affbb2b2	692	ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
rgrover1	537:00d5affbb2b2	693	return gap().getPreferredConnectionParams(params);
rgrover1	537:00d5affbb2b2	694	}
rgrover1	537:00d5affbb2b2	695
rgrover1	537:00d5affbb2b2	696	/**
rgrover1	537:00d5affbb2b2	697	* Set the GAP peripheral preferred connection parameters. These are the
rgrover1	537:00d5affbb2b2	698	* defaults that the peripheral would like to have in a connection. The
rgrover1	537:00d5affbb2b2	699	* choice of the connection parameters is eventually up to the central.
rgrover1	537:00d5affbb2b2	700	*
rgrover1	537:00d5affbb2b2	701	* @param[in] params
rgrover1	537:00d5affbb2b2	702	* The structure containing the desired parameters.
rgrover1	537:00d5affbb2b2	703	*
rgrover1	537:00d5affbb2b2	704	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	705	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	706	* ble.setPreferredConnectionParams() should be replaced with
rgrover1	537:00d5affbb2b2	707	* ble.gap().setPreferredConnectionParams().
rgrover1	537:00d5affbb2b2	708	*/
rgrover1	537:00d5affbb2b2	709	ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
rgrover1	537:00d5affbb2b2	710	return gap().setPreferredConnectionParams(params);
rgrover1	537:00d5affbb2b2	711	}
rgrover1	537:00d5affbb2b2	712
rgrover1	537:00d5affbb2b2	713	/**
rgrover1	537:00d5affbb2b2	714	* Update connection parameters while in the peripheral role.
rgrover1	537:00d5affbb2b2	715	* @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1	537:00d5affbb2b2	716	* the central to perform the procedure.
rgrover1	537:00d5affbb2b2	717	* @param[in] handle
rgrover1	537:00d5affbb2b2	718	* Connection Handle
rgrover1	537:00d5affbb2b2	719	* @param[in] params
rgrover1	537:00d5affbb2b2	720	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1	537:00d5affbb2b2	721	* the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1	537:00d5affbb2b2	722	*
rgrover1	537:00d5affbb2b2	723	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	724	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	725	* ble.updateConnectionParams() should be replaced with
rgrover1	537:00d5affbb2b2	726	* ble.gap().updateConnectionParams().
rgrover1	537:00d5affbb2b2	727	*/
rgrover1	537:00d5affbb2b2	728	ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1	537:00d5affbb2b2	729	return gap().updateConnectionParams(handle, params);
rgrover1	537:00d5affbb2b2	730	}
rgrover1	537:00d5affbb2b2	731
rgrover1	537:00d5affbb2b2	732	/**
rgrover1	537:00d5affbb2b2	733	* Set the device name characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	734	* @param[in] deviceName
rgrover1	537:00d5affbb2b2	735	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1	537:00d5affbb2b2	736	*
rgrover1	537:00d5affbb2b2	737	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	738	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	739	* ble.setDeviceName() should be replaced with
rgrover1	537:00d5affbb2b2	740	* ble.gap().setDeviceName().
rgrover1	537:00d5affbb2b2	741	*/
rgrover1	537:00d5affbb2b2	742	ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1	537:00d5affbb2b2	743	return gap().setDeviceName(deviceName);
rgrover1	537:00d5affbb2b2	744	}
rgrover1	537:00d5affbb2b2	745
rgrover1	537:00d5affbb2b2	746	/**
rgrover1	537:00d5affbb2b2	747	* Get the value of the device name characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	748	* @param[out] deviceName
rgrover1	537:00d5affbb2b2	749	* Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1	537:00d5affbb2b2	750	* terminated* string will be placed. Set this
rgrover1	537:00d5affbb2b2	751	* value to NULL in order to obtain the deviceName-length
rgrover1	537:00d5affbb2b2	752	* from the 'length' parameter.
rgrover1	537:00d5affbb2b2	753	*
rgrover1	537:00d5affbb2b2	754	* @param[in/out] lengthP
rgrover1	537:00d5affbb2b2	755	* (on input) Length of the buffer pointed to by deviceName;
rgrover1	537:00d5affbb2b2	756	* (on output) the complete device name length (without the
rgrover1	537:00d5affbb2b2	757	* null terminator).
rgrover1	537:00d5affbb2b2	758	*
rgrover1	537:00d5affbb2b2	759	* @note If the device name is longer than the size of the supplied buffer,
rgrover1	537:00d5affbb2b2	760	* length will return the complete device name length, and not the
rgrover1	537:00d5affbb2b2	761	* number of bytes actually returned in deviceName. The application may
rgrover1	537:00d5affbb2b2	762	* use this information to retry with a suitable buffer size.
rgrover1	537:00d5affbb2b2	763	*
rgrover1	537:00d5affbb2b2	764	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	765	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	766	* ble.getDeviceName() should be replaced with
rgrover1	537:00d5affbb2b2	767	* ble.gap().getDeviceName().
rgrover1	537:00d5affbb2b2	768	*/
rgrover1	537:00d5affbb2b2	769	ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
rgrover1	537:00d5affbb2b2	770	return gap().getDeviceName(deviceName, lengthP);
rgrover1	537:00d5affbb2b2	771	}
rgrover1	537:00d5affbb2b2	772
rgrover1	537:00d5affbb2b2	773	/**
rgrover1	537:00d5affbb2b2	774	* Set the appearance characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	775	* @param[in] appearance
rgrover1	537:00d5affbb2b2	776	* The new value for the device-appearance.
rgrover1	537:00d5affbb2b2	777	*
rgrover1	537:00d5affbb2b2	778	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	779	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	780	* ble.setAppearance() should be replaced with
rgrover1	537:00d5affbb2b2	781	* ble.gap().setAppearance().
rgrover1	537:00d5affbb2b2	782	*/
rgrover1	537:00d5affbb2b2	783	ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1	537:00d5affbb2b2	784	return gap().setAppearance(appearance);
rgrover1	537:00d5affbb2b2	785	}
rgrover1	537:00d5affbb2b2	786
rgrover1	537:00d5affbb2b2	787	/**
rgrover1	537:00d5affbb2b2	788	* Get the appearance characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	789	* @param[out] appearance
rgrover1	537:00d5affbb2b2	790	* The new value for the device-appearance.
rgrover1	537:00d5affbb2b2	791	*
rgrover1	537:00d5affbb2b2	792	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	793	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	794	* ble.getAppearance() should be replaced with
rgrover1	537:00d5affbb2b2	795	* ble.gap().getAppearance().
rgrover1	537:00d5affbb2b2	796	*/
rgrover1	537:00d5affbb2b2	797	ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1	537:00d5affbb2b2	798	return gap().getAppearance(appearanceP);
rgrover1	537:00d5affbb2b2	799	}
rgrover1	537:00d5affbb2b2	800
rgrover1	537:00d5affbb2b2	801	/**
rgrover1	537:00d5affbb2b2	802	* Set the radio's transmit power.
rgrover1	537:00d5affbb2b2	803	* @param[in] txPower Radio transmit power in dBm.
rgrover1	537:00d5affbb2b2	804	*
rgrover1	537:00d5affbb2b2	805	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	806	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	807	* ble.setTxPower() should be replaced with
rgrover1	537:00d5affbb2b2	808	* ble.gap().setTxPower().
rgrover1	537:00d5affbb2b2	809	*/
rgrover1	537:00d5affbb2b2	810	ble_error_t setTxPower(int8_t txPower) {
rgrover1	537:00d5affbb2b2	811	return gap().setTxPower(txPower);
rgrover1	537:00d5affbb2b2	812	}
rgrover1	537:00d5affbb2b2	813
rgrover1	537:00d5affbb2b2	814	/**
rgrover1	537:00d5affbb2b2	815	* Query the underlying stack for permitted arguments for setTxPower().
rgrover1	537:00d5affbb2b2	816	*
rgrover1	537:00d5affbb2b2	817	* @param[out] valueArrayPP
rgrover1	537:00d5affbb2b2	818	* Out parameter to receive the immutable array of Tx values.
rgrover1	537:00d5affbb2b2	819	* @param[out] countP
rgrover1	537:00d5affbb2b2	820	* Out parameter to receive the array's size.
rgrover1	537:00d5affbb2b2	821	*
rgrover1	537:00d5affbb2b2	822	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	823	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	824	* ble.getPermittedTxPowerValues() should be replaced with
rgrover1	537:00d5affbb2b2	825	* ble.gap().getPermittedTxPowerValues().
rgrover1	537:00d5affbb2b2	826	*/
rgrover1	537:00d5affbb2b2	827	void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
rgrover1	537:00d5affbb2b2	828	gap().getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1	537:00d5affbb2b2	829	}
rgrover1	528:8d21604fe31d	830
rgrover1	528:8d21604fe31d	831	/* APIs to set GAP callbacks. */
rgrover1	528:8d21604fe31d	832	void onTimeout(Gap::EventCallback_t timeoutCallback);
rgrover1	528:8d21604fe31d	833
rgrover1	528:8d21604fe31d	834	void onConnection(Gap::ConnectionEventCallback_t connectionCallback);
rgrover1	528:8d21604fe31d	835	/**
rgrover1	528:8d21604fe31d	836	* Used to setup a callback for GAP disconnection.
rgrover1	528:8d21604fe31d	837	*/
rgrover1	528:8d21604fe31d	838	void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback);
rgrover1	528:8d21604fe31d	839
rgrover1	528:8d21604fe31d	840	/**
rgrover1	528:8d21604fe31d	841	* Append to a chain of callbacks to be invoked upon disconnection; these
rgrover1	528:8d21604fe31d	842	* callbacks receive no context and are therefore different from the
rgrover1	528:8d21604fe31d	843	* onDisconnection callback.
rgrover1	528:8d21604fe31d	844	*/
rgrover1	528:8d21604fe31d	845	template<typename T>
rgrover1	528:8d21604fe31d	846	void addToDisconnectionCallChain(T tptr, void (T::mptr)(void));
rgrover1	528:8d21604fe31d	847
rgrover1	528:8d21604fe31d	848	/**
rgrover1	528:8d21604fe31d	849	* Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1	528:8d21604fe31d	850	* updates are sent out by GATT in the form of notifications).
rgrover1	528:8d21604fe31d	851	*
rgrover1	528:8d21604fe31d	852	* @Note: it is possible to chain together multiple onDataSent callbacks
rgrover1	528:8d21604fe31d	853	* (potentially from different modules of an application) to receive updates
rgrover1	528:8d21604fe31d	854	* to characteristics.
rgrover1	528:8d21604fe31d	855	*
rgrover1	528:8d21604fe31d	856	* @Note: it is also possible to setup a callback into a member function of
rgrover1	528:8d21604fe31d	857	* some object.
rgrover1	528:8d21604fe31d	858	*/
rgrover1	528:8d21604fe31d	859	void onDataSent(void (*callback)(unsigned count));
rgrover1	528:8d21604fe31d	860	template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count));
rgrover1	528:8d21604fe31d	861
rgrover1	528:8d21604fe31d	862	/**
rgrover1	528:8d21604fe31d	863	* Setup a callback for when a characteristic has its value updated by a
rgrover1	528:8d21604fe31d	864	* client.
rgrover1	528:8d21604fe31d	865	*
rgrover1	528:8d21604fe31d	866	* @Note: it is possible to chain together multiple onDataWritten callbacks
rgrover1	528:8d21604fe31d	867	* (potentially from different modules of an application) to receive updates
rgrover1	528:8d21604fe31d	868	* to characteristics. Many services, such as DFU and UART add their own
rgrover1	528:8d21604fe31d	869	* onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1	528:8d21604fe31d	870	*
rgrover1	528:8d21604fe31d	871	* @Note: it is also possible to setup a callback into a member function of
rgrover1	528:8d21604fe31d	872	* some object.
rgrover1	528:8d21604fe31d	873	*/
rgrover1	528:8d21604fe31d	874	void onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP));
rgrover1	528:8d21604fe31d	875	template <typename T> void onDataWritten(T * objPtr, void (T::memberPtr)(const GattWriteCallbackParams context));
rgrover1	528:8d21604fe31d	876
rgrover1	528:8d21604fe31d	877	/**
rgrover1	528:8d21604fe31d	878	* Setup a callback for when a characteristic is being read by a client.
rgrover1	528:8d21604fe31d	879	*
rgrover1	528:8d21604fe31d	880	* @Note: this functionality may not be available on all underlying stacks.
rgrover1	528:8d21604fe31d	881	* You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1	528:8d21604fe31d	882	* alternative.
rgrover1	528:8d21604fe31d	883	*
rgrover1	528:8d21604fe31d	884	* @Note: it is possible to chain together multiple onDataRead callbacks
rgrover1	528:8d21604fe31d	885	* (potentially from different modules of an application) to receive updates
rgrover1	528:8d21604fe31d	886	* to characteristics. Services may add their own onDataRead callbacks
rgrover1	528:8d21604fe31d	887	* behind the scenes to trap interesting events.
rgrover1	528:8d21604fe31d	888	*
rgrover1	528:8d21604fe31d	889	* @Note: it is also possible to setup a callback into a member function of
rgrover1	528:8d21604fe31d	890	* some object.
rgrover1	528:8d21604fe31d	891	*
rgrover1	528:8d21604fe31d	892	* @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1	528:8d21604fe31d	893	* else BLE_ERROR_NONE.
rgrover1	528:8d21604fe31d	894	*/
rgrover1	528:8d21604fe31d	895	ble_error_t onDataRead(void (callback)(const GattReadCallbackParams eventDataP));
rgrover1	528:8d21604fe31d	896	template <typename T> ble_error_t onDataRead(T * objPtr, void (T::memberPtr)(const GattReadCallbackParams context));
rgrover1	528:8d21604fe31d	897
rgrover1	528:8d21604fe31d	898	void onUpdatesEnabled(GattServer::EventCallback_t callback);
rgrover1	528:8d21604fe31d	899	void onUpdatesDisabled(GattServer::EventCallback_t callback);
rgrover1	528:8d21604fe31d	900	void onConfirmationReceived(GattServer::EventCallback_t callback);
rgrover1	528:8d21604fe31d	901
rgrover1	528:8d21604fe31d	902	/**
rgrover1	528:8d21604fe31d	903	* Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1	528:8d21604fe31d	904	* (nACTIVE) signals from the stack that notify the application when the
rgrover1	528:8d21604fe31d	905	* radio is in use. The signal is sent using software interrupt.
rgrover1	528:8d21604fe31d	906	*
rgrover1	528:8d21604fe31d	907	* The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1	528:8d21604fe31d	908	* signal is sent at the end of the Radio Event. These signals can be used
rgrover1	528:8d21604fe31d	909	* by the application programmer to synchronize application logic with radio
rgrover1	528:8d21604fe31d	910	* activity. For example, the ACTIVE signal can be used to shut off external
rgrover1	528:8d21604fe31d	911	* devices to manage peak current drawn during periods when the radio is on,
rgrover1	528:8d21604fe31d	912	* or to trigger sensor data collection for transmission in the Radio Event.
rgrover1	528:8d21604fe31d	913	*
rgrover1	528:8d21604fe31d	914	* @param callback
rgrover1	528:8d21604fe31d	915	* The application handler to be invoked in response to a radio
rgrover1	528:8d21604fe31d	916	* ACTIVE/INACTIVE event.
rgrover1	528:8d21604fe31d	917	*/
rgrover1	528:8d21604fe31d	918	void onRadioNotification(Gap::RadioNotificationEventCallback_t callback);
rgrover1	528:8d21604fe31d	919
rgrover1	528:8d21604fe31d	920	/**
rgrover1	528:8d21604fe31d	921	* Add a service declaration to the local server ATT table. Also add the
rgrover1	528:8d21604fe31d	922	* characteristics contained within.
rgrover1	528:8d21604fe31d	923	*/
rgrover1	528:8d21604fe31d	924	ble_error_t addService(GattService &service);
rgrover1	528:8d21604fe31d	925
rgrover1	528:8d21604fe31d	926	/**
rgrover1	528:8d21604fe31d	927	* @param[in/out] lengthP
rgrover1	528:8d21604fe31d	928	* input: Length in bytes to be read,
rgrover1	528:8d21604fe31d	929	* output: Total length of attribute value upon successful return.
rgrover1	528:8d21604fe31d	930	*/
rgrover1	528:8d21604fe31d	931	ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP);
rgrover1	528:8d21604fe31d	932	/**
rgrover1	528:8d21604fe31d	933	* A version of the same as above with connection handle parameter to allow fetches for connection-specific multivalued attribtues (such as the CCCDs).
rgrover1	528:8d21604fe31d	934	*/
rgrover1	528:8d21604fe31d	935	ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP);
rgrover1	528:8d21604fe31d	936
rgrover1	528:8d21604fe31d	937	/**
rgrover1	528:8d21604fe31d	938	* @param localOnly
rgrover1	528:8d21604fe31d	939	* Only update the characteristic locally regardless of notify/indicate flags in the CCCD.
rgrover1	528:8d21604fe31d	940	*/
rgrover1	528:8d21604fe31d	941	ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly = false);
rgrover1	528:8d21604fe31d	942	/**
rgrover1	528:8d21604fe31d	943	* A version of the same as above with connection handle parameter to allow updates for connection-specific multivalued attribtues (such as the CCCDs).
rgrover1	528:8d21604fe31d	944	*/
rgrover1	528:8d21604fe31d	945	ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1	528:8d21604fe31d	946	GattAttribute::Handle_t attributeHandle,
rgrover1	528:8d21604fe31d	947	const uint8_t *value,
rgrover1	528:8d21604fe31d	948	uint16_t size,
rgrover1	528:8d21604fe31d	949	bool localOnly = false);
rgrover1	528:8d21604fe31d	950
rgrover1	528:8d21604fe31d	951	/**
rgrover1	528:8d21604fe31d	952	* Enable the BLE stack's Security Manager. The Security Manager implements
rgrover1	528:8d21604fe31d	953	* the actual cryptographic algorithms and protocol exchanges that allow two
rgrover1	528:8d21604fe31d	954	* devices to securely exchange data and privately detect each other.
rgrover1	528:8d21604fe31d	955	* Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1	528:8d21604fe31d	956	*
rgrover1	528:8d21604fe31d	957	* @param[in] enableBonding Allow for bonding.
rgrover1	528:8d21604fe31d	958	* @param[in] requireMITM Require protection for man-in-the-middle attacks.
rgrover1	528:8d21604fe31d	959	* @param[in] iocaps To specify IO capabilities of this peripheral,
rgrover1	528:8d21604fe31d	960	* such as availability of a display or keyboard to
rgrover1	528:8d21604fe31d	961	* support out-of-band exchanges of security data.
rgrover1	528:8d21604fe31d	962	* @param[in] passkey To specify a static passkey.
rgrover1	528:8d21604fe31d	963	*
rgrover1	528:8d21604fe31d	964	* @return BLE_ERROR_NONE on success.
rgrover1	528:8d21604fe31d	965	*/
rgrover1	528:8d21604fe31d	966	ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1	528:8d21604fe31d	967	bool requireMITM = true,
rgrover1	528:8d21604fe31d	968	Gap::SecurityIOCapabilities_t iocaps = Gap::IO_CAPS_NONE,
rgrover1	528:8d21604fe31d	969	const Gap::Passkey_t passkey = NULL);
rgrover1	528:8d21604fe31d	970
rgrover1	528:8d21604fe31d	971	/**
rgrover1	528:8d21604fe31d	972	* Setup a callback for when the security setup procedure (key generation
rgrover1	528:8d21604fe31d	973	* and exchange) for a link has started. This will be skipped for bonded
rgrover1	528:8d21604fe31d	974	* devices. The callback is passed in parameters received from the peer's
rgrover1	528:8d21604fe31d	975	* security request: bool allowBonding, bool requireMITM, and
rgrover1	528:8d21604fe31d	976	* SecurityIOCapabilities_t.
rgrover1	528:8d21604fe31d	977	*/
rgrover1	528:8d21604fe31d	978	void onSecuritySetupInitiated(Gap::SecuritySetupInitiatedCallback_t callback);
rgrover1	528:8d21604fe31d	979
rgrover1	528:8d21604fe31d	980	/**
rgrover1	528:8d21604fe31d	981	* Setup a callback for when the security setup procedure (key generation
rgrover1	528:8d21604fe31d	982	* and exchange) for a link has completed. This will be skipped for bonded
rgrover1	528:8d21604fe31d	983	* devices. The callback is passed in the success/failure status of the
rgrover1	528:8d21604fe31d	984	* security setup procedure.
rgrover1	528:8d21604fe31d	985	*/
rgrover1	528:8d21604fe31d	986	void onSecuritySetupCompleted(Gap::SecuritySetupCompletedCallback_t callback);
rgrover1	528:8d21604fe31d	987
rgrover1	528:8d21604fe31d	988	/**
rgrover1	528:8d21604fe31d	989	* Setup a callback for when a link with the peer is secured. For bonded
rgrover1	528:8d21604fe31d	990	* devices, subsequent reconnections with bonded peer will result only in
rgrover1	528:8d21604fe31d	991	* this callback when the link is secured and setup procedures will not
rgrover1	528:8d21604fe31d	992	* occur unless the bonding information is either lost or deleted on either
rgrover1	528:8d21604fe31d	993	* or both sides. The callback is passed in a Gap::SecurityMode_t according
rgrover1	528:8d21604fe31d	994	* to the level of security in effect for the secured link.
rgrover1	528:8d21604fe31d	995	*/
rgrover1	528:8d21604fe31d	996	void onLinkSecured(Gap::LinkSecuredCallback_t callback);
rgrover1	528:8d21604fe31d	997
rgrover1	528:8d21604fe31d	998	/**
rgrover1	528:8d21604fe31d	999	* Setup a callback for successful bonding; i.e. that link-specific security
rgrover1	528:8d21604fe31d	1000	* context is stored persistently for a peer device.
rgrover1	528:8d21604fe31d	1001	*/
rgrover1	528:8d21604fe31d	1002	void onSecurityContextStored(Gap::HandleSpecificEvent_t callback);
rgrover1	528:8d21604fe31d	1003
rgrover1	528:8d21604fe31d	1004	/**
rgrover1	528:8d21604fe31d	1005	* Setup a callback for when the passkey needs to be displayed on a
rgrover1	528:8d21604fe31d	1006	* peripheral with DISPLAY capability. This happens when security is
rgrover1	528:8d21604fe31d	1007	* configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey)
rgrover1	528:8d21604fe31d	1008	* needs to be exchanged between the peers to authenticate the connection
rgrover1	528:8d21604fe31d	1009	* attempt.
rgrover1	528:8d21604fe31d	1010	*/
rgrover1	528:8d21604fe31d	1011	void onPasskeyDisplay(Gap::PasskeyDisplayCallback_t callback);
rgrover1	528:8d21604fe31d	1012
rgrover1	528:8d21604fe31d	1013	/**
rgrover1	528:8d21604fe31d	1014	* Get the security status of a connection.
rgrover1	528:8d21604fe31d	1015	*
rgrover1	528:8d21604fe31d	1016	* @param[in] connectionHandle Handle to identify the connection.
rgrover1	528:8d21604fe31d	1017	* @param[out] securityStatusP security status.
rgrover1	528:8d21604fe31d	1018	*
rgrover1	528:8d21604fe31d	1019	* @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
rgrover1	528:8d21604fe31d	1020	*/
rgrover1	528:8d21604fe31d	1021	ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, Gap::LinkSecurityStatus_t *securityStatusP);
rgrover1	528:8d21604fe31d	1022
rgrover1	528:8d21604fe31d	1023	/**
rgrover1	528:8d21604fe31d	1024	* Delete all peer device context and all related bonding information from
rgrover1	528:8d21604fe31d	1025	* the database within the security manager.
rgrover1	528:8d21604fe31d	1026	*
rgrover1	528:8d21604fe31d	1027	* @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
rgrover1	528:8d21604fe31d	1028	* @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
rgrover1	528:8d21604fe31d	1029	* application registration.
rgrover1	528:8d21604fe31d	1030	*/
rgrover1	528:8d21604fe31d	1031	ble_error_t purgeAllBondingState(void);
rgrover1	528:8d21604fe31d	1032
rgrover1	528:8d21604fe31d	1033	/**
rgrover1	528:8d21604fe31d	1034	* Launch service discovery. Once launched, service discovery will remain
rgrover1	528:8d21604fe31d	1035	* active with callbacks being issued back into the application for matching
rgrover1	528:8d21604fe31d	1036	* services/characteristics. isServiceDiscoveryActive() can be used to
rgrover1	528:8d21604fe31d	1037	* determine status; and a termination callback (if setup) will be invoked
rgrover1	528:8d21604fe31d	1038	* at the end. Service discovery can be terminated prematurely if needed
rgrover1	528:8d21604fe31d	1039	* using terminateServiceDiscovery().
rgrover1	528:8d21604fe31d	1040	*
rgrover1	528:8d21604fe31d	1041	* @param connectionHandle
rgrover1	528:8d21604fe31d	1042	* Handle for the connection with the peer.
rgrover1	528:8d21604fe31d	1043	* @param sc
rgrover1	528:8d21604fe31d	1044	* This is the application callback for matching service. Taken as
rgrover1	528:8d21604fe31d	1045	* NULL by default. Note: service discovery may still be active
rgrover1	528:8d21604fe31d	1046	* when this callback is issued; calling asynchronous BLE-stack
rgrover1	528:8d21604fe31d	1047	* APIs from within this application callback might cause the
rgrover1	528:8d21604fe31d	1048	* stack to abort service discovery. If this becomes an issue, it
rgrover1	528:8d21604fe31d	1049	* may be better to make local copy of the discoveredService and
rgrover1	528:8d21604fe31d	1050	* wait for service discovery to terminate before operating on the
rgrover1	528:8d21604fe31d	1051	* service.
rgrover1	528:8d21604fe31d	1052	* @param cc
rgrover1	528:8d21604fe31d	1053	* This is the application callback for matching characteristic.
rgrover1	528:8d21604fe31d	1054	* Taken as NULL by default. Note: service discovery may still be
rgrover1	528:8d21604fe31d	1055	* active when this callback is issued; calling asynchronous
rgrover1	528:8d21604fe31d	1056	* BLE-stack APIs from within this application callback might cause
rgrover1	528:8d21604fe31d	1057	* the stack to abort service discovery. If this becomes an issue,
rgrover1	528:8d21604fe31d	1058	* it may be better to make local copy of the discoveredCharacteristic
rgrover1	528:8d21604fe31d	1059	* and wait for service discovery to terminate before operating on the
rgrover1	528:8d21604fe31d	1060	* characteristic.
rgrover1	528:8d21604fe31d	1061	* @param matchingServiceUUID
rgrover1	528:8d21604fe31d	1062	* UUID based filter for specifying a service in which the application is
rgrover1	528:8d21604fe31d	1063	* interested. By default it is set as the wildcard UUID_UNKNOWN,
rgrover1	528:8d21604fe31d	1064	* in which case it matches all services. If characteristic-UUID
rgrover1	528:8d21604fe31d	1065	* filter (below) is set to the wildcard value, then a service
rgrover1	528:8d21604fe31d	1066	* callback will be invoked for the matching service (or for every
rgrover1	528:8d21604fe31d	1067	* service if the service filter is a wildcard).
rgrover1	528:8d21604fe31d	1068	* @param matchingCharacteristicUUIDIn
rgrover1	528:8d21604fe31d	1069	* UUID based filter for specifying characteristic in which the application
rgrover1	528:8d21604fe31d	1070	* is interested. By default it is set as the wildcard UUID_UKNOWN
rgrover1	528:8d21604fe31d	1071	* to match against any characteristic. If both service-UUID
rgrover1	528:8d21604fe31d	1072	* filter and characteristic-UUID filter are used with non- wildcard
rgrover1	528:8d21604fe31d	1073	* values, then only a single characteristic callback is
rgrover1	528:8d21604fe31d	1074	* invoked for the matching characteristic.
rgrover1	528:8d21604fe31d	1075	*
rgrover1	528:8d21604fe31d	1076	* @Note Using wildcard values for both service-UUID and characteristic-
rgrover1	528:8d21604fe31d	1077	* UUID will result in complete service discovery--callbacks being
rgrover1	528:8d21604fe31d	1078	* called for every service and characteristic.
rgrover1	528:8d21604fe31d	1079	*
rgrover1	528:8d21604fe31d	1080	* @return
rgrover1	528:8d21604fe31d	1081	* BLE_ERROR_NONE if service discovery is launched successfully; else an appropriate error.
rgrover1	528:8d21604fe31d	1082	*/
rgrover1	528:8d21604fe31d	1083	ble_error_t launchServiceDiscovery(Gap::Handle_t connectionHandle,
rgrover1	528:8d21604fe31d	1084	ServiceDiscovery::ServiceCallback_t sc = NULL,
rgrover1	528:8d21604fe31d	1085	ServiceDiscovery::CharacteristicCallback_t cc = NULL,
rgrover1	528:8d21604fe31d	1086	const UUID &matchingServiceUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN),
rgrover1	528:8d21604fe31d	1087	const UUID &matchingCharacteristicUUIDIn = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN));
rgrover1	528:8d21604fe31d	1088
rgrover1	528:8d21604fe31d	1089	/**
rgrover1	528:8d21604fe31d	1090	* Setup callback for when serviceDiscovery terminates.
rgrover1	528:8d21604fe31d	1091	*/
rgrover1	528:8d21604fe31d	1092	void onServiceDiscoveryTermination(ServiceDiscovery::TerminationCallback_t callback);
rgrover1	528:8d21604fe31d	1093
rgrover1	528:8d21604fe31d	1094	/**
rgrover1	528:8d21604fe31d	1095	* Is service-discovery currently active?
rgrover1	528:8d21604fe31d	1096	*/
rgrover1	528:8d21604fe31d	1097	bool isServiceDiscoveryActive(void);
rgrover1	528:8d21604fe31d	1098
rgrover1	528:8d21604fe31d	1099	/**
rgrover1	528:8d21604fe31d	1100	* Terminate an ongoing service-discovery. This should result in an
rgrover1	528:8d21604fe31d	1101	* invocation of the TerminationCallback if service-discovery is active.
rgrover1	528:8d21604fe31d	1102	*/
rgrover1	528:8d21604fe31d	1103	void terminateServiceDiscovery(void);
rgrover1	528:8d21604fe31d	1104
rgrover1	528:8d21604fe31d	1105	public:
rgrover1	531:bdcd44b03974	1106	BLE() : transport(createBLEInstance()) {
rgrover1	531:bdcd44b03974	1107	/* empty */
rgrover1	528:8d21604fe31d	1108	}
rgrover1	528:8d21604fe31d	1109
rgrover1	528:8d21604fe31d	1110	private:
rgrover1	528:8d21604fe31d	1111	BLEInstanceBase const transport; / the device specific backend */
rgrover1	528:8d21604fe31d	1112	};
rgrover1	528:8d21604fe31d	1113
rgrover1	537:00d5affbb2b2	1114	typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
rgrover1	528:8d21604fe31d	1115	* code. Will be dropped at some point soon.*/
rgrover1	528:8d21604fe31d	1116
rgrover1	528:8d21604fe31d	1117	/* BLE methods. Most of these simply forward the calls to the underlying
rgrover1	528:8d21604fe31d	1118	* transport.*/
rgrover1	528:8d21604fe31d	1119
rgrover1	528:8d21604fe31d	1120	inline void
rgrover1	528:8d21604fe31d	1121	BLE::onTimeout(Gap::EventCallback_t timeoutCallback)
rgrover1	528:8d21604fe31d	1122	{
rgrover1	531:bdcd44b03974	1123	gap().setOnTimeout(timeoutCallback);
rgrover1	528:8d21604fe31d	1124	}
rgrover1	528:8d21604fe31d	1125
rgrover1	528:8d21604fe31d	1126	inline void
rgrover1	528:8d21604fe31d	1127	BLE::onConnection(Gap::ConnectionEventCallback_t connectionCallback)
rgrover1	528:8d21604fe31d	1128	{
rgrover1	531:bdcd44b03974	1129	gap().setOnConnection(connectionCallback);
rgrover1	528:8d21604fe31d	1130	}
rgrover1	528:8d21604fe31d	1131
rgrover1	528:8d21604fe31d	1132	inline void
rgrover1	528:8d21604fe31d	1133	BLE::onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback)
rgrover1	528:8d21604fe31d	1134	{
rgrover1	531:bdcd44b03974	1135	gap().setOnDisconnection(disconnectionCallback);
rgrover1	528:8d21604fe31d	1136	}
rgrover1	528:8d21604fe31d	1137
rgrover1	528:8d21604fe31d	1138	template<typename T>
rgrover1	528:8d21604fe31d	1139	inline void
rgrover1	528:8d21604fe31d	1140	BLE::addToDisconnectionCallChain(T tptr, void (T::mptr)(void)) {
rgrover1	531:bdcd44b03974	1141	gap().addToDisconnectionCallChain(tptr, mptr);
rgrover1	528:8d21604fe31d	1142	}
rgrover1	528:8d21604fe31d	1143
rgrover1	528:8d21604fe31d	1144	inline void
rgrover1	528:8d21604fe31d	1145	BLE::onDataSent(void (*callback)(unsigned count)) {
rgrover1	528:8d21604fe31d	1146	transport->getGattServer().setOnDataSent(callback);
rgrover1	528:8d21604fe31d	1147	}
rgrover1	528:8d21604fe31d	1148
rgrover1	528:8d21604fe31d	1149	template <typename T> inline void
rgrover1	528:8d21604fe31d	1150	BLE::onDataSent(T objPtr, void (T::memberPtr)(unsigned count)) {
rgrover1	528:8d21604fe31d	1151	transport->getGattServer().setOnDataSent(objPtr, memberPtr);
rgrover1	528:8d21604fe31d	1152	}
rgrover1	528:8d21604fe31d	1153
rgrover1	528:8d21604fe31d	1154	inline void
rgrover1	528:8d21604fe31d	1155	BLE::onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP)) {
rgrover1	528:8d21604fe31d	1156	transport->getGattServer().setOnDataWritten(callback);
rgrover1	528:8d21604fe31d	1157	}
rgrover1	528:8d21604fe31d	1158
rgrover1	528:8d21604fe31d	1159	template <typename T> inline void
rgrover1	528:8d21604fe31d	1160	BLE::onDataWritten(T objPtr, void (T::memberPtr)(const GattWriteCallbackParams *context)) {
rgrover1	528:8d21604fe31d	1161	transport->getGattServer().setOnDataWritten(objPtr, memberPtr);
rgrover1	528:8d21604fe31d	1162	}
rgrover1	528:8d21604fe31d	1163
rgrover1	528:8d21604fe31d	1164	inline ble_error_t
rgrover1	528:8d21604fe31d	1165	BLE::onDataRead(void (callback)(const GattReadCallbackParams eventDataP)) {
rgrover1	528:8d21604fe31d	1166	return transport->getGattServer().setOnDataRead(callback);
rgrover1	528:8d21604fe31d	1167	}
rgrover1	528:8d21604fe31d	1168
rgrover1	528:8d21604fe31d	1169	template <typename T> inline ble_error_t
rgrover1	528:8d21604fe31d	1170	BLE::onDataRead(T objPtr, void (T::memberPtr)(const GattReadCallbackParams *context)) {
rgrover1	528:8d21604fe31d	1171	return transport->getGattServer().setOnDataRead(objPtr, memberPtr);
rgrover1	528:8d21604fe31d	1172	}
rgrover1	528:8d21604fe31d	1173
rgrover1	528:8d21604fe31d	1174	inline void
rgrover1	528:8d21604fe31d	1175	BLE::onUpdatesEnabled(GattServer::EventCallback_t callback)
rgrover1	528:8d21604fe31d	1176	{
rgrover1	528:8d21604fe31d	1177	transport->getGattServer().setOnUpdatesEnabled(callback);
rgrover1	528:8d21604fe31d	1178	}
rgrover1	528:8d21604fe31d	1179
rgrover1	528:8d21604fe31d	1180	inline void
rgrover1	528:8d21604fe31d	1181	BLE::onUpdatesDisabled(GattServer::EventCallback_t callback)
rgrover1	528:8d21604fe31d	1182	{
rgrover1	528:8d21604fe31d	1183	transport->getGattServer().setOnUpdatesDisabled(callback);
rgrover1	528:8d21604fe31d	1184	}
rgrover1	528:8d21604fe31d	1185
rgrover1	528:8d21604fe31d	1186	inline void
rgrover1	528:8d21604fe31d	1187	BLE::onConfirmationReceived(GattServer::EventCallback_t callback)
rgrover1	528:8d21604fe31d	1188	{
rgrover1	528:8d21604fe31d	1189	transport->getGattServer().setOnConfirmationReceived(callback);
rgrover1	528:8d21604fe31d	1190	}
rgrover1	528:8d21604fe31d	1191
rgrover1	528:8d21604fe31d	1192	inline void
rgrover1	528:8d21604fe31d	1193	BLE::onRadioNotification(Gap::RadioNotificationEventCallback_t callback)
rgrover1	528:8d21604fe31d	1194	{
rgrover1	531:bdcd44b03974	1195	gap().setOnRadioNotification(callback);
rgrover1	528:8d21604fe31d	1196	}
rgrover1	528:8d21604fe31d	1197
rgrover1	528:8d21604fe31d	1198	inline ble_error_t
rgrover1	528:8d21604fe31d	1199	BLE::addService(GattService &service)
rgrover1	528:8d21604fe31d	1200	{
rgrover1	528:8d21604fe31d	1201	return transport->getGattServer().addService(service);
rgrover1	528:8d21604fe31d	1202	}
rgrover1	528:8d21604fe31d	1203
rgrover1	528:8d21604fe31d	1204	inline ble_error_t
rgrover1	528:8d21604fe31d	1205	BLE::readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP)
rgrover1	528:8d21604fe31d	1206	{
rgrover1	528:8d21604fe31d	1207	return transport->getGattServer().readValue(attributeHandle, buffer, lengthP);
rgrover1	528:8d21604fe31d	1208	}
rgrover1	528:8d21604fe31d	1209
rgrover1	528:8d21604fe31d	1210	inline ble_error_t
rgrover1	528:8d21604fe31d	1211	BLE::readCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1	528:8d21604fe31d	1212	GattAttribute::Handle_t attributeHandle,
rgrover1	528:8d21604fe31d	1213	uint8_t *buffer,
rgrover1	528:8d21604fe31d	1214	uint16_t *lengthP)
rgrover1	528:8d21604fe31d	1215	{
rgrover1	528:8d21604fe31d	1216	return transport->getGattServer().readValue(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1	528:8d21604fe31d	1217	}
rgrover1	528:8d21604fe31d	1218
rgrover1	528:8d21604fe31d	1219	inline ble_error_t
rgrover1	528:8d21604fe31d	1220	BLE::updateCharacteristicValue(GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly)
rgrover1	528:8d21604fe31d	1221	{
rgrover1	528:8d21604fe31d	1222	return transport->getGattServer().updateValue(attributeHandle, const_cast<uint8_t *>(value), size, localOnly);
rgrover1	528:8d21604fe31d	1223	}
rgrover1	528:8d21604fe31d	1224
rgrover1	528:8d21604fe31d	1225	inline ble_error_t
rgrover1	528:8d21604fe31d	1226	BLE::updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1	528:8d21604fe31d	1227	GattAttribute::Handle_t attributeHandle,
rgrover1	528:8d21604fe31d	1228	const uint8_t *value,
rgrover1	528:8d21604fe31d	1229	uint16_t size,
rgrover1	528:8d21604fe31d	1230	bool localOnly)
rgrover1	528:8d21604fe31d	1231	{
rgrover1	528:8d21604fe31d	1232	return transport->getGattServer().updateValue(connectionHandle, attributeHandle, const_cast<uint8_t *>(value), size, localOnly);
rgrover1	528:8d21604fe31d	1233	}
rgrover1	528:8d21604fe31d	1234
rgrover1	528:8d21604fe31d	1235	inline ble_error_t
rgrover1	528:8d21604fe31d	1236	BLE::initializeSecurity(bool enableBonding,
rgrover1	528:8d21604fe31d	1237	bool requireMITM,
rgrover1	528:8d21604fe31d	1238	Gap::SecurityIOCapabilities_t iocaps,
rgrover1	528:8d21604fe31d	1239	const Gap::Passkey_t passkey)
rgrover1	528:8d21604fe31d	1240	{
rgrover1	528:8d21604fe31d	1241	return transport->initializeSecurity(enableBonding, requireMITM, iocaps, passkey);
rgrover1	528:8d21604fe31d	1242	}
rgrover1	528:8d21604fe31d	1243
rgrover1	528:8d21604fe31d	1244	inline void
rgrover1	528:8d21604fe31d	1245	BLE::onSecuritySetupInitiated(Gap::SecuritySetupInitiatedCallback_t callback)
rgrover1	528:8d21604fe31d	1246	{
rgrover1	531:bdcd44b03974	1247	gap().setOnSecuritySetupInitiated(callback);
rgrover1	528:8d21604fe31d	1248	}
rgrover1	528:8d21604fe31d	1249
rgrover1	528:8d21604fe31d	1250	inline void
rgrover1	528:8d21604fe31d	1251	BLE::onSecuritySetupCompleted(Gap::SecuritySetupCompletedCallback_t callback)
rgrover1	528:8d21604fe31d	1252	{
rgrover1	531:bdcd44b03974	1253	gap().setOnSecuritySetupCompleted(callback);
rgrover1	528:8d21604fe31d	1254	}
rgrover1	528:8d21604fe31d	1255
rgrover1	528:8d21604fe31d	1256	inline void
rgrover1	528:8d21604fe31d	1257	BLE::onLinkSecured(Gap::LinkSecuredCallback_t callback)
rgrover1	528:8d21604fe31d	1258	{
rgrover1	531:bdcd44b03974	1259	gap().setOnLinkSecured(callback);
rgrover1	528:8d21604fe31d	1260	}
rgrover1	528:8d21604fe31d	1261
rgrover1	528:8d21604fe31d	1262	inline void
rgrover1	528:8d21604fe31d	1263	BLE::onSecurityContextStored(Gap::HandleSpecificEvent_t callback)
rgrover1	528:8d21604fe31d	1264	{
rgrover1	531:bdcd44b03974	1265	gap().setOnSecurityContextStored(callback);
rgrover1	528:8d21604fe31d	1266	}
rgrover1	528:8d21604fe31d	1267
rgrover1	528:8d21604fe31d	1268	inline void
rgrover1	528:8d21604fe31d	1269	BLE::onPasskeyDisplay(Gap::PasskeyDisplayCallback_t callback)
rgrover1	528:8d21604fe31d	1270	{
rgrover1	531:bdcd44b03974	1271	return gap().setOnPasskeyDisplay(callback);
rgrover1	528:8d21604fe31d	1272	}
rgrover1	528:8d21604fe31d	1273
rgrover1	528:8d21604fe31d	1274	inline ble_error_t
rgrover1	528:8d21604fe31d	1275	BLE::getLinkSecurity(Gap::Handle_t connectionHandle, Gap::LinkSecurityStatus_t *securityStatusP)
rgrover1	528:8d21604fe31d	1276	{
rgrover1	531:bdcd44b03974	1277	return gap().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1	528:8d21604fe31d	1278	}
rgrover1	528:8d21604fe31d	1279
rgrover1	528:8d21604fe31d	1280	inline ble_error_t
rgrover1	528:8d21604fe31d	1281	BLE::purgeAllBondingState(void)
rgrover1	528:8d21604fe31d	1282	{
rgrover1	531:bdcd44b03974	1283	return gap().purgeAllBondingState();
rgrover1	528:8d21604fe31d	1284	}
rgrover1	528:8d21604fe31d	1285
rgrover1	528:8d21604fe31d	1286	inline ble_error_t
rgrover1	528:8d21604fe31d	1287	BLE::launchServiceDiscovery(Gap::Handle_t connectionHandle,
rgrover1	528:8d21604fe31d	1288	ServiceDiscovery::ServiceCallback_t sc,
rgrover1	528:8d21604fe31d	1289	ServiceDiscovery::CharacteristicCallback_t cc,
rgrover1	528:8d21604fe31d	1290	const UUID &matchingServiceUUID,
rgrover1	528:8d21604fe31d	1291	const UUID &matchingCharacteristicUUID)
rgrover1	528:8d21604fe31d	1292	{
rgrover1	528:8d21604fe31d	1293	return transport->getGattClient().launchServiceDiscovery(connectionHandle, sc, cc, matchingServiceUUID, matchingCharacteristicUUID);
rgrover1	528:8d21604fe31d	1294	}
rgrover1	528:8d21604fe31d	1295
rgrover1	528:8d21604fe31d	1296	inline void
rgrover1	528:8d21604fe31d	1297	BLE::onServiceDiscoveryTermination(ServiceDiscovery::TerminationCallback_t callback)
rgrover1	528:8d21604fe31d	1298	{
rgrover1	528:8d21604fe31d	1299	transport->getGattClient().onServiceDiscoveryTermination(callback);
rgrover1	528:8d21604fe31d	1300	}
rgrover1	528:8d21604fe31d	1301
rgrover1	528:8d21604fe31d	1302	/**
rgrover1	528:8d21604fe31d	1303	* Is service-discovery currently active?
rgrover1	528:8d21604fe31d	1304	*/
rgrover1	528:8d21604fe31d	1305	inline bool
rgrover1	528:8d21604fe31d	1306	BLE::isServiceDiscoveryActive(void)
rgrover1	528:8d21604fe31d	1307	{
rgrover1	528:8d21604fe31d	1308	return transport->getGattClient().isServiceDiscoveryActive();
rgrover1	528:8d21604fe31d	1309	}
rgrover1	528:8d21604fe31d	1310
rgrover1	528:8d21604fe31d	1311	/**
rgrover1	528:8d21604fe31d	1312	* Terminate an ongoing service-discovery. This should result in an
rgrover1	528:8d21604fe31d	1313	* invocation of the TerminationCallback if service-discovery is active.
rgrover1	528:8d21604fe31d	1314	*/
rgrover1	528:8d21604fe31d	1315	inline void
rgrover1	528:8d21604fe31d	1316	BLE::terminateServiceDiscovery(void)
rgrover1	528:8d21604fe31d	1317	{
rgrover1	528:8d21604fe31d	1318	transport->getGattClient().terminateServiceDiscovery();
rgrover1	528:8d21604fe31d	1319	}
rgrover1	528:8d21604fe31d	1320
rgrover1	528:8d21604fe31d	1321	#endif // ifndef __BLE_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	28 Mar 2017
Imports:	0
Forks:	0
Commits:	1210
Dependents:	0
Dependencies:	0
Followers:	1

public/BLE.h@538:fff02872b62f, 2015-06-19 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning