Osamu Koizumi / Mbed OS Pelion-GR-LYCHEE-camera-firmware

Taking photo using GR-LYCHEE through Pelion Device Management.

This firmware project works for GR-LYCHEE and GR-PEACH.

Steps to build this firmware with Mbed CLI

Import project

$ mbed import http://os.mbed.com/users/coisme/code/Pelion-GR-LYCHEE-camera-firmware/

Setting

  • Ethernet (GR-PEACH only)
    • Change the file name mbed_app.RZ_A1H_Ethernet.json to mbed_app.json
  • Wi-Fi
    • Change the Wi-Fi setting in mbed_app.json, i.e. nsapi.default-wifi-ssid and nsapi.default-wifi-password

If you haven't set your Pelion API key, run the following command.

$ mbed config -G CLOUD_SDK_API_KEY <API_KEY>

Setting for Pelion Device Management

$ mbed dm init -d "example.com" --model-name "PELION_DEMO" -q --force

Compile

For GR-LYCHEE:

$ mbed compile -t GCC_ARM -m GR_LYCHEE

For GR-PEACH:

$ mbed compile -t GCC_ARM -m RZ_A1H

Write the created .bin file to your GR-LYCHEE/PEACH.

That's it! :-)

LED Status Indicator

LEDs next to UB0 show the status of your GR-LYCHEE/PEACH.

LED#GR-LYCHEEGR-PEACHStatusDescription
LED1greenredNormalTurned on after the device is registered to Pelion Device Management successfully.
LED2yellowgreenErrorTurned on when the network initialization failed. Check your Wi-Fi setting.
LED3orangeblueErrorTurned on when the Pelion Device Management Client initialization failed. Check your SD card.
LED4redredErrorTurned on when the network is disconnected. Check your Wi-Fi network status.

Clear device identity

If you want to clear the device's identity, connect to the device via serial terminal. Then input r command. The device flushes the identity storage, then reboot.

Known Issues

  • client_error(6) -> Client in reconnection mode NetworkError appears when connecting to network, but eventually connection will be established.
  • Warning message "MBEDTLS_TEST_NULL_ENTROPY has been enabled. This configuration is not secure and is not suitable for production use" appears when compiling the project for GR-PEACH. This can be ignored in development stage.

mbed_app.json

Committer:
Osamu Koizumi
Date:
2019-02-22
Revision:
11:414b4a4ebbc6
Parent:
9:eac9e0c9effd
Child:
13:bc31cb1602de

File content as of revision 11:414b4a4ebbc6:

{
    "macros": [
        "ARM_UC_USE_PAL_BLOCKDEVICE=1",
        "MBED_CLOUD_CLIENT_UPDATE_STORAGE=ARM_UCP_FLASHIAP_BLOCKDEVICE",
        "MBED_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
        "MBED_CLOUD_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
        "PAL_USER_DEFINED_CONFIGURATION=\"sotp_fs_config_MbedOS.h\"",
        "PAL_FS_MOUNT_POINT_PRIMARY=\"/fs\"",
        "MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\"",
        "PAL_DTLS_PEER_MIN_TIMEOUT=5000"
    ],
    "config": {
        "camera":{
            "help": "0:disable 1:enable",
            "value": "1"
        },
        "camera-type":{
            "help": "Please see EasyAttach_CameraAndLCD/README.md",
            "value": null
        }
    },
    "target_overrides": {
        "*": {
            "platform.stdio-baud-rate"          : 115200,
            "platform.stdio-convert-newlines"   : true,
            "update-client.storage-address"     : "(1024*1024*64)",
            "update-client.storage-size"        : "(1024*1024*2)",
            "update-client.storage-locations"   : "1",
            "mbed-trace.enable"                 : null,
            "nsapi.default-wifi-security"       : "WPA_WPA2",
            "nsapi.default-wifi-ssid"           : "\"SSID\"",
            "nsapi.default-wifi-password"       : "\"PASSWORD\""
        },
        "RZ_A1H": {
            "target.features_add"               : ["BOOTLOADER"],
            "target.components_add"             : ["SD"],
            "target.macros_add"                 : ["MBEDTLS_TEST_NULL_ENTROPY", "MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES"],
            "target.network-default-interface-type" : "ETHERNET",
            "flash-start-address"               : "0x18000000",
            "flash-size"                        : "(8*1024*1024)",
            "sotp-section-1-address"            : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 2*(4*1024))",
            "sotp-section-1-size"               : "(4*1024)",
            "sotp-section-2-address"            : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 1*(4*1024))",
            "sotp-section-2-size"               : "(4*1024)",
            "sotp-num-sections"                 : 2,
            "target.bootloader_img"             : "bootloader/mbed-bootloader-RZ_A1H.bin",
            "target.header_offset"              : "0x10000",
            "target.app_offset"                 : "0x10400",
            "update-client.application-details" : "(MBED_CONF_APP_FLASH_START_ADDRESS + 64*1024)"
        },
        "GR_LYCHEE": {
            "target.features_add"               : ["BOOTLOADER"],
            "target.components_add"             : ["SD"],
            "target.extra_labels_add"           : ["ESP32_DRIVER"],
            "target.network-default-interface-type" : "WIFI",
            "flash-start-address"               : "0x18000000",
            "flash-size"                        : "(8*1024*1024)",
            "sotp-section-1-address"            : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 2*(4*1024))",
            "sotp-section-1-size"               : "(4*1024)",
            "sotp-section-2-address"            : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 1*(4*1024))",
            "sotp-section-2-size"               : "(4*1024)",
            "sotp-num-sections"                 : 2,
            "target.bootloader_img"             : "bootloader/mbed-bootloader-GR_LYCHEE.bin",
            "target.header_offset"              : "0x10000",
            "target.app_offset"                 : "0x10400",
            "update-client.application-details" : "(MBED_CONF_APP_FLASH_START_ADDRESS + 64*1024)"
        }
    },
    "config": {
        "format-storage-layer-on-error": {
            "help": "Whether to format the storage layer when it cannot be read - always disable for production devices!",
            "value": 1
        },
        "developer-mode": {
            "help": "Enable Developer mode to skip Factory enrollment",
            "value": 1
        },
        "main-stack-size": {
            "value": 6000
        },
        "flash-start-address": {
            "help": "Start address of internal flash. Only used in this config to help the definition of other macros.",
            "value": null
        },
        "flash-size": {
            "help": "Total size of internal flash. Only used in this config to help the definition of other macros.",
            "value": null
        },
        "sotp-section-1-address": {
            "help": "Flash sector address for SOTP sector 1",
            "macro_name": "PAL_INTERNAL_FLASH_SECTION_1_ADDRESS",
            "value": null
        },
        "sotp-section-1-size": {
            "help": "Flash sector size for SOTP sector 1",
            "macro_name": "PAL_INTERNAL_FLASH_SECTION_1_SIZE",
            "value": null
        },
        "sotp-section-2-address": {
            "help": "Flash sector address for SOTP sector 2",
            "macro_name": "PAL_INTERNAL_FLASH_SECTION_2_ADDRESS",
            "value": null
        },
        "sotp-section-2-size": {
            "help": "Flash sector size for SOTP sector 2",
            "macro_name": "PAL_INTERNAL_FLASH_SECTION_2_SIZE",
            "value": null
        },
        "sotp-num-sections": {
            "help": "Number of SOTP sections",
            "macro_name": "PAL_INT_FLASH_NUM_SECTIONS",
            "value": null
        }
    }
}