YuLin Jiang / nRF51BLE_API

BLE_API for nRF51

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@767:d6a79c77d1c3, 2015-08-07 (annotated)

Committer:
rgrover1
Date:
Fri Aug 07 15:53:50 2015 +0100
Revision:
767:d6a79c77d1c3
Parent:
766:03f1a26f132f
Child:
770:079b714e9c1a
Synchronized with git rev e65471d6

Author: Joshua Slater

Fixed bugs with Gap:: and GapAdvertisingParams

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 710:b2e1a2660ec2 1 /* mbed Microcontroller Library
rgrover1 710:b2e1a2660ec2 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 710:b2e1a2660ec2 3 *
rgrover1 710:b2e1a2660ec2 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 710:b2e1a2660ec2 5 * you may not use this file except in compliance with the License.
rgrover1 710:b2e1a2660ec2 6 * You may obtain a copy of the License at
rgrover1 710:b2e1a2660ec2 7 *
rgrover1 710:b2e1a2660ec2 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 710:b2e1a2660ec2 9 *
rgrover1 710:b2e1a2660ec2 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 710:b2e1a2660ec2 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 710:b2e1a2660ec2 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 710:b2e1a2660ec2 13 * See the License for the specific language governing permissions and
rgrover1 710:b2e1a2660ec2 14 * limitations under the License.
rgrover1 710:b2e1a2660ec2 15 */
rgrover1 710:b2e1a2660ec2 16
rgrover1 710:b2e1a2660ec2 17 #ifndef __GAP_H__
rgrover1 710:b2e1a2660ec2 18 #define __GAP_H__
rgrover1 710:b2e1a2660ec2 19
rgrover1 710:b2e1a2660ec2 20 #include "GapAdvertisingData.h"
rgrover1 710:b2e1a2660ec2 21 #include "GapAdvertisingParams.h"
rgrover1 710:b2e1a2660ec2 22 #include "GapScanningParams.h"
rgrover1 710:b2e1a2660ec2 23 #include "GapEvents.h"
rgrover1 710:b2e1a2660ec2 24 #include "CallChain.h"
rgrover1 710:b2e1a2660ec2 25 #include "FunctionPointerWithContext.h"
rgrover1 710:b2e1a2660ec2 26
rgrover1 710:b2e1a2660ec2 27 using namespace mbed;
rgrover1 710:b2e1a2660ec2 28
rgrover1 710:b2e1a2660ec2 29 /* Forward declarations for classes which will only be used for pointers or references in the following. */
rgrover1 710:b2e1a2660ec2 30 class GapAdvertisingParams;
rgrover1 710:b2e1a2660ec2 31 class GapScanningParams;
rgrover1 710:b2e1a2660ec2 32 class GapAdvertisingData;
rgrover1 710:b2e1a2660ec2 33
rgrover1 710:b2e1a2660ec2 34 class Gap {
rgrover1 710:b2e1a2660ec2 35 public:
rgrover1 710:b2e1a2660ec2 36 enum AddressType_t {
rgrover1 710:b2e1a2660ec2 37 ADDR_TYPE_PUBLIC = 0,
rgrover1 710:b2e1a2660ec2 38 ADDR_TYPE_RANDOM_STATIC,
rgrover1 710:b2e1a2660ec2 39 ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE,
rgrover1 710:b2e1a2660ec2 40 ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE
rgrover1 710:b2e1a2660ec2 41 };
rgrover1 710:b2e1a2660ec2 42 typedef enum AddressType_t addr_type_t; /* @Note: deprecated. Use AddressType_t instead. */
rgrover1 710:b2e1a2660ec2 43
rgrover1 710:b2e1a2660ec2 44 static const unsigned ADDR_LEN = 6;
rgrover1 710:b2e1a2660ec2 45 typedef uint8_t Address_t[ADDR_LEN]; /* 48-bit address, LSB format. */
rgrover1 710:b2e1a2660ec2 46 typedef Address_t address_t; /* @Note: deprecated. Use Address_t instead. */
rgrover1 710:b2e1a2660ec2 47
rgrover1 710:b2e1a2660ec2 48 enum TimeoutSource_t {
rgrover1 710:b2e1a2660ec2 49 TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
rgrover1 710:b2e1a2660ec2 50 TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
rgrover1 710:b2e1a2660ec2 51 TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
rgrover1 710:b2e1a2660ec2 52 TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
rgrover1 710:b2e1a2660ec2 53 };
rgrover1 710:b2e1a2660ec2 54
rgrover1 710:b2e1a2660ec2 55 /**
rgrover1 710:b2e1a2660ec2 56 * Enumeration for disconnection reasons. The values for these reasons are
rgrover1 710:b2e1a2660ec2 57 * derived from Nordic's implementation; but the reasons are meant to be
rgrover1 710:b2e1a2660ec2 58 * independent of the transport. If you are returned a reason which is not
rgrover1 710:b2e1a2660ec2 59 * covered by this enumeration, then please refer to the underlying
rgrover1 710:b2e1a2660ec2 60 * transport library.
rgrover1 710:b2e1a2660ec2 61 */
rgrover1 710:b2e1a2660ec2 62 enum DisconnectionReason_t {
rgrover1 710:b2e1a2660ec2 63 CONNECTION_TIMEOUT = 0x08,
rgrover1 710:b2e1a2660ec2 64 REMOTE_USER_TERMINATED_CONNECTION = 0x13,
rgrover1 710:b2e1a2660ec2 65 REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote Device Terminated Connection due to low resources.*/
rgrover1 710:b2e1a2660ec2 66 REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote Device Terminated Connection due to power off. */
rgrover1 710:b2e1a2660ec2 67 LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
rgrover1 710:b2e1a2660ec2 68 CONN_INTERVAL_UNACCEPTABLE = 0x3B,
rgrover1 710:b2e1a2660ec2 69 };
rgrover1 710:b2e1a2660ec2 70
rgrover1 710:b2e1a2660ec2 71 /* Describes the current state of the device (more than one bit can be set) */
rgrover1 710:b2e1a2660ec2 72 struct GapState_t {
rgrover1 710:b2e1a2660ec2 73 unsigned advertising : 1; /**< peripheral is currently advertising */
rgrover1 710:b2e1a2660ec2 74 unsigned connected : 1; /**< peripheral is connected to a central */
rgrover1 710:b2e1a2660ec2 75 };
rgrover1 710:b2e1a2660ec2 76
rgrover1 710:b2e1a2660ec2 77 typedef uint16_t Handle_t; /* Type for connection handle. */
rgrover1 710:b2e1a2660ec2 78
rgrover1 710:b2e1a2660ec2 79 typedef struct {
rgrover1 710:b2e1a2660ec2 80 uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 81 uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 82 uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 83 uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 84 } ConnectionParams_t;
rgrover1 710:b2e1a2660ec2 85
rgrover1 710:b2e1a2660ec2 86 enum Role_t {
rgrover1 710:b2e1a2660ec2 87 PERIPHERAL = 0x1, /**< Peripheral Role. */
rgrover1 710:b2e1a2660ec2 88 CENTRAL = 0x2, /**< Central Role. */
rgrover1 710:b2e1a2660ec2 89 };
rgrover1 710:b2e1a2660ec2 90
rgrover1 710:b2e1a2660ec2 91 struct AdvertisementCallbackParams_t {
rgrover1 710:b2e1a2660ec2 92 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 93 int8_t rssi;
rgrover1 710:b2e1a2660ec2 94 bool isScanResponse;
rgrover1 710:b2e1a2660ec2 95 GapAdvertisingParams::AdvertisingType_t type;
rgrover1 710:b2e1a2660ec2 96 uint8_t advertisingDataLen;
rgrover1 710:b2e1a2660ec2 97 const uint8_t *advertisingData;
rgrover1 710:b2e1a2660ec2 98 };
rgrover1 710:b2e1a2660ec2 99 typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
rgrover1 710:b2e1a2660ec2 100
rgrover1 710:b2e1a2660ec2 101 struct ConnectionCallbackParams_t {
rgrover1 710:b2e1a2660ec2 102 Handle_t handle;
rgrover1 710:b2e1a2660ec2 103 Role_t role;
rgrover1 710:b2e1a2660ec2 104 AddressType_t peerAddrType;
rgrover1 710:b2e1a2660ec2 105 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 106 AddressType_t ownAddrType;
rgrover1 710:b2e1a2660ec2 107 Address_t ownAddr;
rgrover1 710:b2e1a2660ec2 108 const ConnectionParams_t *connectionParams;
rgrover1 710:b2e1a2660ec2 109
rgrover1 710:b2e1a2660ec2 110 ConnectionCallbackParams_t(Handle_t handleIn,
rgrover1 710:b2e1a2660ec2 111 Role_t roleIn,
rgrover1 710:b2e1a2660ec2 112 AddressType_t peerAddrTypeIn,
rgrover1 710:b2e1a2660ec2 113 const uint8_t *peerAddrIn,
rgrover1 710:b2e1a2660ec2 114 AddressType_t ownAddrTypeIn,
rgrover1 710:b2e1a2660ec2 115 const uint8_t *ownAddrIn,
rgrover1 710:b2e1a2660ec2 116 const ConnectionParams_t *connectionParamsIn) :
rgrover1 710:b2e1a2660ec2 117 handle(handleIn),
rgrover1 710:b2e1a2660ec2 118 role(roleIn),
rgrover1 710:b2e1a2660ec2 119 peerAddrType(peerAddrTypeIn),
rgrover1 710:b2e1a2660ec2 120 peerAddr(),
rgrover1 710:b2e1a2660ec2 121 ownAddrType(ownAddrTypeIn),
rgrover1 710:b2e1a2660ec2 122 ownAddr(),
rgrover1 710:b2e1a2660ec2 123 connectionParams(connectionParamsIn) {
rgrover1 710:b2e1a2660ec2 124 memcpy(peerAddr, peerAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 125 memcpy(ownAddr, ownAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 126 }
rgrover1 710:b2e1a2660ec2 127 };
rgrover1 710:b2e1a2660ec2 128
rgrover1 710:b2e1a2660ec2 129 static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
rgrover1 710:b2e1a2660ec2 130 static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
rgrover1 710:b2e1a2660ec2 131 return (durationInMillis * 1000) / UNIT_1_25_MS;
rgrover1 710:b2e1a2660ec2 132 }
rgrover1 766:03f1a26f132f 133
rgrover1 710:b2e1a2660ec2 134
rgrover1 710:b2e1a2660ec2 135 typedef void (*TimeoutEventCallback_t)(TimeoutSource_t source);
rgrover1 710:b2e1a2660ec2 136 typedef void (*ConnectionEventCallback_t)(const ConnectionCallbackParams_t *params);
rgrover1 710:b2e1a2660ec2 137 typedef void (*DisconnectionEventCallback_t)(Handle_t, DisconnectionReason_t);
rgrover1 753:0f60274cd3ad 138 typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
rgrover1 710:b2e1a2660ec2 139
rgrover1 710:b2e1a2660ec2 140 /*
rgrover1 710:b2e1a2660ec2 141 * The following functions are meant to be overridden in the platform-specific sub-class.
rgrover1 710:b2e1a2660ec2 142 */
rgrover1 710:b2e1a2660ec2 143 public:
rgrover1 710:b2e1a2660ec2 144 /**
rgrover1 710:b2e1a2660ec2 145 * Set the BTLE MAC address and type. Please note that the address format is
rgrover1 710:b2e1a2660ec2 146 * LSB (least significant byte first). Please refer to Address_t.
rgrover1 710:b2e1a2660ec2 147 *
rgrover1 710:b2e1a2660ec2 148 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 149 */
rgrover1 710:b2e1a2660ec2 150 virtual ble_error_t setAddress(AddressType_t type, const Address_t address) {
rgrover1 734:4872b70437ce 151 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 152 (void)type;
rgrover1 734:4872b70437ce 153 (void)address;
rgrover1 734:4872b70437ce 154
rgrover1 728:997ba5e7b3b6 155 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 156 }
rgrover1 710:b2e1a2660ec2 157
rgrover1 710:b2e1a2660ec2 158 /**
rgrover1 710:b2e1a2660ec2 159 * Fetch the BTLE MAC address and type.
rgrover1 710:b2e1a2660ec2 160 *
rgrover1 710:b2e1a2660ec2 161 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 162 */
rgrover1 710:b2e1a2660ec2 163 virtual ble_error_t getAddress(AddressType_t *typeP, Address_t address) {
rgrover1 734:4872b70437ce 164 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 165 (void)typeP;
rgrover1 734:4872b70437ce 166 (void)address;
rgrover1 734:4872b70437ce 167
rgrover1 728:997ba5e7b3b6 168 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 169 }
rgrover1 710:b2e1a2660ec2 170
rgrover1 710:b2e1a2660ec2 171 /**
rgrover1 710:b2e1a2660ec2 172 * @return Minimum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 173 */
rgrover1 710:b2e1a2660ec2 174 virtual uint16_t getMinAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 175 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 176 }
rgrover1 710:b2e1a2660ec2 177
rgrover1 710:b2e1a2660ec2 178 /**
rgrover1 710:b2e1a2660ec2 179 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1 710:b2e1a2660ec2 180 */
rgrover1 710:b2e1a2660ec2 181 virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 182 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 183 }
rgrover1 710:b2e1a2660ec2 184
rgrover1 710:b2e1a2660ec2 185 /**
rgrover1 710:b2e1a2660ec2 186 * @return Maximum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 187 */
rgrover1 710:b2e1a2660ec2 188 virtual uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 189 return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 190 }
rgrover1 710:b2e1a2660ec2 191
rgrover1 710:b2e1a2660ec2 192 virtual ble_error_t stopAdvertising(void) {
rgrover1 728:997ba5e7b3b6 193 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 194 }
rgrover1 710:b2e1a2660ec2 195
rgrover1 710:b2e1a2660ec2 196 /**
rgrover1 710:b2e1a2660ec2 197 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 710:b2e1a2660ec2 198 *
rgrover1 710:b2e1a2660ec2 199 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 710:b2e1a2660ec2 200 */
rgrover1 710:b2e1a2660ec2 201 virtual ble_error_t stopScan() {
rgrover1 728:997ba5e7b3b6 202 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 203 }
rgrover1 710:b2e1a2660ec2 204
rgrover1 710:b2e1a2660ec2 205 /**
rgrover1 710:b2e1a2660ec2 206 * Create a connection (GAP Link Establishment).
rgrover1 710:b2e1a2660ec2 207 *
rgrover1 710:b2e1a2660ec2 208 * @param peerAddr
rgrover1 710:b2e1a2660ec2 209 * 48-bit address, LSB format.
rgrover1 710:b2e1a2660ec2 210 * @param peerAddrType
rgrover1 710:b2e1a2660ec2 211 * Address type of the peer.
rgrover1 710:b2e1a2660ec2 212 * @param connectionParams
rgrover1 710:b2e1a2660ec2 213 * Connection parameters.
rgrover1 710:b2e1a2660ec2 214 * @param scanParams
rgrover1 710:b2e1a2660ec2 215 * Paramters to be used while scanning for the peer.
rgrover1 710:b2e1a2660ec2 216 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 710:b2e1a2660ec2 217 * successfully. The connectionCallback (if set) will be invoked upon
rgrover1 710:b2e1a2660ec2 218 * a connection event.
rgrover1 710:b2e1a2660ec2 219 */
rgrover1 710:b2e1a2660ec2 220 virtual ble_error_t connect(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 221 Gap::AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 222 const ConnectionParams_t *connectionParams,
rgrover1 710:b2e1a2660ec2 223 const GapScanningParams *scanParams) {
rgrover1 734:4872b70437ce 224 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 225 (void)peerAddr;
rgrover1 734:4872b70437ce 226 (void)peerAddrType;
rgrover1 734:4872b70437ce 227 (void)connectionParams;
rgrover1 734:4872b70437ce 228 (void)scanParams;
rgrover1 734:4872b70437ce 229
rgrover1 728:997ba5e7b3b6 230 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 231 }
rgrover1 710:b2e1a2660ec2 232
rgrover1 710:b2e1a2660ec2 233 /**
rgrover1 710:b2e1a2660ec2 234 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 235 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 236 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 237 *
rgrover1 710:b2e1a2660ec2 238 * @param reason
rgrover1 710:b2e1a2660ec2 239 * The reason for disconnection to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 240 */
rgrover1 710:b2e1a2660ec2 241 virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
rgrover1 734:4872b70437ce 242 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 243 (void)connectionHandle;
rgrover1 734:4872b70437ce 244 (void)reason;
rgrover1 734:4872b70437ce 245
rgrover1 728:997ba5e7b3b6 246 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 247 }
rgrover1 710:b2e1a2660ec2 248
rgrover1 710:b2e1a2660ec2 249 /**
rgrover1 710:b2e1a2660ec2 250 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 251 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 252 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 253 *
rgrover1 710:b2e1a2660ec2 254 * @param reason
rgrover1 710:b2e1a2660ec2 255 * The reason for disconnection to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 256 *
rgrover1 710:b2e1a2660ec2 257 * @note: this version of disconnect() doesn't take a connection handle. It
rgrover1 710:b2e1a2660ec2 258 * will work reliably only for stacks which are limited to a single
rgrover1 710:b2e1a2660ec2 259 * connection. This API should be considered *deprecated* in favour of the
rgrover1 710:b2e1a2660ec2 260 * altertive which takes a connection handle. It will be dropped in the future.
rgrover1 710:b2e1a2660ec2 261 */
rgrover1 710:b2e1a2660ec2 262 virtual ble_error_t disconnect(DisconnectionReason_t reason) {
rgrover1 734:4872b70437ce 263 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 264 (void)reason;
rgrover1 734:4872b70437ce 265
rgrover1 728:997ba5e7b3b6 266 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 267 }
rgrover1 710:b2e1a2660ec2 268
rgrover1 710:b2e1a2660ec2 269 /**
rgrover1 710:b2e1a2660ec2 270 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 271 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 272 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 273 *
rgrover1 710:b2e1a2660ec2 274 * @param[out] params
rgrover1 710:b2e1a2660ec2 275 * The structure where the parameters will be stored. Memory
rgrover1 710:b2e1a2660ec2 276 * for this is owned by the caller.
rgrover1 710:b2e1a2660ec2 277 *
rgrover1 710:b2e1a2660ec2 278 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 710:b2e1a2660ec2 279 * the given structure pointed to by params.
rgrover1 710:b2e1a2660ec2 280 */
rgrover1 710:b2e1a2660ec2 281 virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 282 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 283 (void)params;
rgrover1 734:4872b70437ce 284
rgrover1 728:997ba5e7b3b6 285 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 286 }
rgrover1 710:b2e1a2660ec2 287
rgrover1 710:b2e1a2660ec2 288 /**
rgrover1 710:b2e1a2660ec2 289 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 290 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 291 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 292 *
rgrover1 710:b2e1a2660ec2 293 * @param[in] params
rgrover1 710:b2e1a2660ec2 294 * The structure containing the desired parameters.
rgrover1 710:b2e1a2660ec2 295 */
rgrover1 710:b2e1a2660ec2 296 virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 297 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 298 (void)params;
rgrover1 734:4872b70437ce 299
rgrover1 728:997ba5e7b3b6 300 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 301 }
rgrover1 710:b2e1a2660ec2 302
rgrover1 710:b2e1a2660ec2 303 /**
rgrover1 710:b2e1a2660ec2 304 * Update connection parameters while in the peripheral role.
rgrover1 710:b2e1a2660ec2 305 * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1 710:b2e1a2660ec2 306 * the central to perform the procedure.
rgrover1 710:b2e1a2660ec2 307 * @param[in] handle
rgrover1 710:b2e1a2660ec2 308 * Connection Handle
rgrover1 710:b2e1a2660ec2 309 * @param[in] params
rgrover1 710:b2e1a2660ec2 310 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 710:b2e1a2660ec2 311 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 710:b2e1a2660ec2 312 */
rgrover1 710:b2e1a2660ec2 313 virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 314 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 315 (void)handle;
rgrover1 734:4872b70437ce 316 (void)params;
rgrover1 734:4872b70437ce 317
rgrover1 728:997ba5e7b3b6 318 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 319 }
rgrover1 710:b2e1a2660ec2 320
rgrover1 710:b2e1a2660ec2 321 /**
rgrover1 710:b2e1a2660ec2 322 * Set the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 323 * @param[in] deviceName
rgrover1 710:b2e1a2660ec2 324 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 710:b2e1a2660ec2 325 */
rgrover1 710:b2e1a2660ec2 326 virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1 734:4872b70437ce 327 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 328 (void)deviceName;
rgrover1 734:4872b70437ce 329
rgrover1 728:997ba5e7b3b6 330 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 331 }
rgrover1 710:b2e1a2660ec2 332
rgrover1 710:b2e1a2660ec2 333 /**
rgrover1 710:b2e1a2660ec2 334 * Get the value of the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 335 * @param[out] deviceName
rgrover1 710:b2e1a2660ec2 336 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 710:b2e1a2660ec2 337 * terminated* string will be placed. Set this
rgrover1 710:b2e1a2660ec2 338 * value to NULL in order to obtain the deviceName-length
rgrover1 710:b2e1a2660ec2 339 * from the 'length' parameter.
rgrover1 710:b2e1a2660ec2 340 *
rgrover1 710:b2e1a2660ec2 341 * @param[in/out] lengthP
rgrover1 710:b2e1a2660ec2 342 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 710:b2e1a2660ec2 343 * (on output) the complete device name length (without the
rgrover1 710:b2e1a2660ec2 344 * null terminator).
rgrover1 710:b2e1a2660ec2 345 *
rgrover1 710:b2e1a2660ec2 346 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 710:b2e1a2660ec2 347 * length will return the complete device name length, and not the
rgrover1 710:b2e1a2660ec2 348 * number of bytes actually returned in deviceName. The application may
rgrover1 710:b2e1a2660ec2 349 * use this information to retry with a suitable buffer size.
rgrover1 710:b2e1a2660ec2 350 */
rgrover1 710:b2e1a2660ec2 351 virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 734:4872b70437ce 352 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 353 (void)deviceName;
rgrover1 734:4872b70437ce 354 (void)lengthP;
rgrover1 734:4872b70437ce 355
rgrover1 728:997ba5e7b3b6 356 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 357 }
rgrover1 710:b2e1a2660ec2 358
rgrover1 710:b2e1a2660ec2 359 /**
rgrover1 710:b2e1a2660ec2 360 * Set the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 361 * @param[in] appearance
rgrover1 710:b2e1a2660ec2 362 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 363 */
rgrover1 710:b2e1a2660ec2 364 virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1 734:4872b70437ce 365 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 366 (void)appearance;
rgrover1 734:4872b70437ce 367
rgrover1 728:997ba5e7b3b6 368 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 369 }
rgrover1 710:b2e1a2660ec2 370
rgrover1 710:b2e1a2660ec2 371 /**
rgrover1 710:b2e1a2660ec2 372 * Get the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 373 * @param[out] appearance
rgrover1 710:b2e1a2660ec2 374 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 375 */
rgrover1 710:b2e1a2660ec2 376 virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1 734:4872b70437ce 377 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 378 (void)appearanceP;
rgrover1 734:4872b70437ce 379
rgrover1 728:997ba5e7b3b6 380 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 381 }
rgrover1 710:b2e1a2660ec2 382
rgrover1 710:b2e1a2660ec2 383 /**
rgrover1 710:b2e1a2660ec2 384 * Set the radio's transmit power.
rgrover1 710:b2e1a2660ec2 385 * @param[in] txPower Radio transmit power in dBm.
rgrover1 710:b2e1a2660ec2 386 */
rgrover1 710:b2e1a2660ec2 387 virtual ble_error_t setTxPower(int8_t txPower) {
rgrover1 734:4872b70437ce 388 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 389 (void)txPower;
rgrover1 734:4872b70437ce 390
rgrover1 728:997ba5e7b3b6 391 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 392 }
rgrover1 710:b2e1a2660ec2 393
rgrover1 710:b2e1a2660ec2 394 /**
rgrover1 710:b2e1a2660ec2 395 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 710:b2e1a2660ec2 396 *
rgrover1 710:b2e1a2660ec2 397 * @param[out] valueArrayPP
rgrover1 710:b2e1a2660ec2 398 * Out parameter to receive the immutable array of Tx values.
rgrover1 710:b2e1a2660ec2 399 * @param[out] countP
rgrover1 710:b2e1a2660ec2 400 * Out parameter to receive the array's size.
rgrover1 710:b2e1a2660ec2 401 */
rgrover1 710:b2e1a2660ec2 402 virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
rgrover1 734:4872b70437ce 403 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 404 (void)valueArrayPP;
rgrover1 734:4872b70437ce 405 (void)countP;
rgrover1 734:4872b70437ce 406
rgrover1 742:861ed7eb186d 407 *countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 408 }
rgrover1 710:b2e1a2660ec2 409
rgrover1 710:b2e1a2660ec2 410 protected:
rgrover1 710:b2e1a2660ec2 411 /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
rgrover1 710:b2e1a2660ec2 412 virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
rgrover1 728:997ba5e7b3b6 413 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 414 }
rgrover1 710:b2e1a2660ec2 415
rgrover1 710:b2e1a2660ec2 416 /*
rgrover1 710:b2e1a2660ec2 417 * APIs with non-virtual implementations.
rgrover1 710:b2e1a2660ec2 418 */
rgrover1 710:b2e1a2660ec2 419 public:
rgrover1 710:b2e1a2660ec2 420 /**
rgrover1 710:b2e1a2660ec2 421 * Returns the current GAP state of the device using a bitmask which
rgrover1 710:b2e1a2660ec2 422 * describes whether the device is advertising and/or connected.
rgrover1 710:b2e1a2660ec2 423 */
rgrover1 710:b2e1a2660ec2 424 GapState_t getState(void) const {
rgrover1 710:b2e1a2660ec2 425 return state;
rgrover1 710:b2e1a2660ec2 426 }
rgrover1 710:b2e1a2660ec2 427
rgrover1 710:b2e1a2660ec2 428 /**
rgrover1 710:b2e1a2660ec2 429 * Set the GAP advertising mode to use for this device.
rgrover1 710:b2e1a2660ec2 430 */
rgrover1 710:b2e1a2660ec2 431 void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
rgrover1 710:b2e1a2660ec2 432 _advParams.setAdvertisingType(advType);
rgrover1 710:b2e1a2660ec2 433 }
rgrover1 710:b2e1a2660ec2 434
rgrover1 710:b2e1a2660ec2 435 /**
rgrover1 710:b2e1a2660ec2 436 * @param[in] interval
rgrover1 710:b2e1a2660ec2 437 * Advertising interval in units of milliseconds. Advertising
rgrover1 710:b2e1a2660ec2 438 * is disabled if interval is 0. If interval is smaller than
rgrover1 710:b2e1a2660ec2 439 * the minimum supported value, then the minimum supported
rgrover1 710:b2e1a2660ec2 440 * value is used instead. This minimum value can be discovered
rgrover1 710:b2e1a2660ec2 441 * using getMinAdvertisingInterval().
rgrover1 710:b2e1a2660ec2 442 *
rgrover1 710:b2e1a2660ec2 443 * This field must be set to 0 if connectionMode is equal
rgrover1 710:b2e1a2660ec2 444 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 710:b2e1a2660ec2 445 *
rgrover1 710:b2e1a2660ec2 446 * @note: Decreasing this value will allow central devices to detect a
rgrover1 710:b2e1a2660ec2 447 * peripheral faster at the expense of more power being used by the radio
rgrover1 710:b2e1a2660ec2 448 * due to the higher data transmit rate.
rgrover1 710:b2e1a2660ec2 449 *
rgrover1 710:b2e1a2660ec2 450 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 710:b2e1a2660ec2 451 * You should use the parallel API from Gap directly. A former call to
rgrover1 710:b2e1a2660ec2 452 * ble.setAdvertisingInterval(...) should now be achieved using
rgrover1 710:b2e1a2660ec2 453 * ble.gap().setAdvertisingInterval(...).
rgrover1 710:b2e1a2660ec2 454 *
rgrover1 710:b2e1a2660ec2 455 * @Note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 710:b2e1a2660ec2 456 * 'interval' argument. That required an explicit conversion from
rgrover1 710:b2e1a2660ec2 457 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 710:b2e1a2660ec2 458 * no longer required as the new units are milliseconds. Any application
rgrover1 710:b2e1a2660ec2 459 * code depending on the old semantics would need to be updated accordingly.
rgrover1 710:b2e1a2660ec2 460 */
rgrover1 710:b2e1a2660ec2 461 void setAdvertisingInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 462 if (interval == 0) {
rgrover1 710:b2e1a2660ec2 463 stopAdvertising();
rgrover1 710:b2e1a2660ec2 464 } else if (interval < getMinAdvertisingInterval()) {
rgrover1 710:b2e1a2660ec2 465 interval = getMinAdvertisingInterval();
rgrover1 710:b2e1a2660ec2 466 }
rgrover1 767:d6a79c77d1c3 467 _advParams.setInterval(GapAdvertisingParams::MSEC_TO_ADVERTISEMENT_DURATION_UNITS(interval));
rgrover1 710:b2e1a2660ec2 468 }
rgrover1 710:b2e1a2660ec2 469
rgrover1 710:b2e1a2660ec2 470 /**
rgrover1 710:b2e1a2660ec2 471 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 472 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 710:b2e1a2660ec2 473 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 710:b2e1a2660ec2 474 */
rgrover1 710:b2e1a2660ec2 475 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 710:b2e1a2660ec2 476 _advParams.setTimeout(timeout);
rgrover1 710:b2e1a2660ec2 477 }
rgrover1 710:b2e1a2660ec2 478
rgrover1 710:b2e1a2660ec2 479 /**
rgrover1 710:b2e1a2660ec2 480 * Start advertising.
rgrover1 710:b2e1a2660ec2 481 */
rgrover1 710:b2e1a2660ec2 482 ble_error_t startAdvertising(void) {
rgrover1 710:b2e1a2660ec2 483 setAdvertisingData(); /* update the underlying stack */
rgrover1 710:b2e1a2660ec2 484 return startAdvertising(_advParams);
rgrover1 710:b2e1a2660ec2 485 }
rgrover1 710:b2e1a2660ec2 486
rgrover1 710:b2e1a2660ec2 487 /**
rgrover1 710:b2e1a2660ec2 488 * Reset any advertising payload prepared from prior calls to
rgrover1 710:b2e1a2660ec2 489 * accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1 710:b2e1a2660ec2 490 * initialized adv payload to the underlying stack.
rgrover1 710:b2e1a2660ec2 491 *
rgrover1 710:b2e1a2660ec2 492 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 493 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 494 */
rgrover1 710:b2e1a2660ec2 495 void clearAdvertisingPayload(void) {
rgrover1 710:b2e1a2660ec2 496 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 497 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 498 }
rgrover1 710:b2e1a2660ec2 499
rgrover1 710:b2e1a2660ec2 500 /**
rgrover1 710:b2e1a2660ec2 501 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 502 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 710:b2e1a2660ec2 503 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 710:b2e1a2660ec2 504 * small.
rgrover1 710:b2e1a2660ec2 505 *
rgrover1 710:b2e1a2660ec2 506 * @param[in] flags
rgrover1 710:b2e1a2660ec2 507 * The flags to be added. Please refer to
rgrover1 710:b2e1a2660ec2 508 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 710:b2e1a2660ec2 509 * flags may be specified in combination.
rgrover1 710:b2e1a2660ec2 510 */
rgrover1 710:b2e1a2660ec2 511 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 710:b2e1a2660ec2 512 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 513 if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 514 return rc;
rgrover1 710:b2e1a2660ec2 515 }
rgrover1 710:b2e1a2660ec2 516
rgrover1 710:b2e1a2660ec2 517 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 518 }
rgrover1 710:b2e1a2660ec2 519
rgrover1 710:b2e1a2660ec2 520 /**
rgrover1 710:b2e1a2660ec2 521 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 522 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 710:b2e1a2660ec2 523 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 710:b2e1a2660ec2 524 * small.
rgrover1 710:b2e1a2660ec2 525 *
rgrover1 710:b2e1a2660ec2 526 * @param app
rgrover1 710:b2e1a2660ec2 527 * The appearance of the peripheral.
rgrover1 710:b2e1a2660ec2 528 */
rgrover1 710:b2e1a2660ec2 529 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 710:b2e1a2660ec2 530 setAppearance(app);
rgrover1 710:b2e1a2660ec2 531
rgrover1 710:b2e1a2660ec2 532 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 533 if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 534 return rc;
rgrover1 710:b2e1a2660ec2 535 }
rgrover1 710:b2e1a2660ec2 536
rgrover1 710:b2e1a2660ec2 537 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 538 }
rgrover1 710:b2e1a2660ec2 539
rgrover1 710:b2e1a2660ec2 540 /**
rgrover1 710:b2e1a2660ec2 541 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 542 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 710:b2e1a2660ec2 543 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 710:b2e1a2660ec2 544 * small.
rgrover1 710:b2e1a2660ec2 545 *
rgrover1 710:b2e1a2660ec2 546 * @param app
rgrover1 764:1e560f0d45e1 547 * The max transmit power to be used by the controller (in dBm).
rgrover1 764:1e560f0d45e1 548 * This is only a hint.
rgrover1 710:b2e1a2660ec2 549 */
rgrover1 710:b2e1a2660ec2 550 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 710:b2e1a2660ec2 551 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 552 if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 553 return rc;
rgrover1 710:b2e1a2660ec2 554 }
rgrover1 710:b2e1a2660ec2 555
rgrover1 710:b2e1a2660ec2 556 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 557 }
rgrover1 710:b2e1a2660ec2 558
rgrover1 710:b2e1a2660ec2 559 /**
rgrover1 710:b2e1a2660ec2 560 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 561 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 710:b2e1a2660ec2 562 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1 710:b2e1a2660ec2 563 * advertising payload proves to be too small.
rgrover1 710:b2e1a2660ec2 564 *
rgrover1 710:b2e1a2660ec2 565 * @param type The type which describes the variable length data.
rgrover1 710:b2e1a2660ec2 566 * @param data data bytes.
rgrover1 710:b2e1a2660ec2 567 * @param len length of data.
rgrover1 710:b2e1a2660ec2 568 */
rgrover1 710:b2e1a2660ec2 569 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 570 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 710:b2e1a2660ec2 571 setDeviceName(data);
rgrover1 710:b2e1a2660ec2 572 }
rgrover1 710:b2e1a2660ec2 573
rgrover1 710:b2e1a2660ec2 574 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 575 if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 576 return rc;
rgrover1 710:b2e1a2660ec2 577 }
rgrover1 710:b2e1a2660ec2 578
rgrover1 710:b2e1a2660ec2 579 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 580 }
rgrover1 710:b2e1a2660ec2 581
rgrover1 710:b2e1a2660ec2 582 /**
rgrover1 765:4cd91998cd48 583 * Update a particular ADV field in the advertising payload (based on
rgrover1 765:4cd91998cd48 584 * matching type and length). Note: the length of the new data must be the
rgrover1 765:4cd91998cd48 585 * same as the old one.
rgrover1 763:36c3e2b1f1ae 586 *
rgrover1 765:4cd91998cd48 587 * @param[in] type The ADV type field which describes the variable length data.
rgrover1 765:4cd91998cd48 588 * @param[in] data data bytes.
rgrover1 765:4cd91998cd48 589 * @param[in] len length of data.
rgrover1 765:4cd91998cd48 590 *
rgrover1 765:4cd91998cd48 591 * @note: If advertisements are enabled, then the update will take effect immediately.
rgrover1 765:4cd91998cd48 592 *
rgrover1 765:4cd91998cd48 593 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
rgrover1 765:4cd91998cd48 594 * a <type, len> match; else an appropriate error.
rgrover1 763:36c3e2b1f1ae 595 */
rgrover1 763:36c3e2b1f1ae 596 ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 763:36c3e2b1f1ae 597 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 763:36c3e2b1f1ae 598 setDeviceName(data);
rgrover1 763:36c3e2b1f1ae 599 }
rgrover1 763:36c3e2b1f1ae 600
rgrover1 763:36c3e2b1f1ae 601 ble_error_t rc;
rgrover1 763:36c3e2b1f1ae 602 if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 763:36c3e2b1f1ae 603 return rc;
rgrover1 763:36c3e2b1f1ae 604 }
rgrover1 763:36c3e2b1f1ae 605
rgrover1 763:36c3e2b1f1ae 606 return setAdvertisingData();
rgrover1 763:36c3e2b1f1ae 607 }
rgrover1 763:36c3e2b1f1ae 608
rgrover1 763:36c3e2b1f1ae 609 /**
rgrover1 710:b2e1a2660ec2 610 * Setup a particular, user-constructed advertisement payload for the
rgrover1 710:b2e1a2660ec2 611 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 710:b2e1a2660ec2 612 * there are other APIs to build an advertisement payload (see above).
rgrover1 710:b2e1a2660ec2 613 */
rgrover1 710:b2e1a2660ec2 614 ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
rgrover1 710:b2e1a2660ec2 615 _advPayload = payload;
rgrover1 710:b2e1a2660ec2 616 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 617 }
rgrover1 710:b2e1a2660ec2 618
rgrover1 710:b2e1a2660ec2 619 /**
rgrover1 710:b2e1a2660ec2 620 * @return Read back advertising data. Useful for storing and
rgrover1 710:b2e1a2660ec2 621 * restoring payload.
rgrover1 710:b2e1a2660ec2 622 */
rgrover1 710:b2e1a2660ec2 623 const GapAdvertisingData &getAdvertisingPayload(void) const {
rgrover1 710:b2e1a2660ec2 624 return _advPayload;
rgrover1 710:b2e1a2660ec2 625 }
rgrover1 710:b2e1a2660ec2 626
rgrover1 710:b2e1a2660ec2 627 /**
rgrover1 710:b2e1a2660ec2 628 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 629 * scanResponse payload.
rgrover1 710:b2e1a2660ec2 630 *
rgrover1 710:b2e1a2660ec2 631 * @param[in] type The type which describes the variable length data.
rgrover1 710:b2e1a2660ec2 632 * @param[in] data data bytes.
rgrover1 710:b2e1a2660ec2 633 * @param[in] len length of data.
rgrover1 710:b2e1a2660ec2 634 */
rgrover1 710:b2e1a2660ec2 635 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 636 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 637 if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 638 return rc;
rgrover1 710:b2e1a2660ec2 639 }
rgrover1 710:b2e1a2660ec2 640
rgrover1 710:b2e1a2660ec2 641 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 642 }
rgrover1 710:b2e1a2660ec2 643
rgrover1 710:b2e1a2660ec2 644 /**
rgrover1 710:b2e1a2660ec2 645 * Reset any scan response prepared from prior calls to
rgrover1 710:b2e1a2660ec2 646 * accumulateScanResponse().
rgrover1 710:b2e1a2660ec2 647 *
rgrover1 710:b2e1a2660ec2 648 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 649 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 650 */
rgrover1 710:b2e1a2660ec2 651 void clearScanResponse(void) {
rgrover1 710:b2e1a2660ec2 652 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 653 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 654 }
rgrover1 710:b2e1a2660ec2 655
rgrover1 710:b2e1a2660ec2 656 /**
rgrover1 710:b2e1a2660ec2 657 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 658 * @param[in] interval
rgrover1 710:b2e1a2660ec2 659 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 660 * @param[in] window
rgrover1 710:b2e1a2660ec2 661 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 662 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 663 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 710:b2e1a2660ec2 664 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 665 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 666 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 667 *
rgrover1 710:b2e1a2660ec2 668 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 669 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 670 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 671 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 672 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 673 * interval.
rgrover1 710:b2e1a2660ec2 674 *
rgrover1 710:b2e1a2660ec2 675 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 676 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 677 *
rgrover1 710:b2e1a2660ec2 678 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 710:b2e1a2660ec2 679 */
rgrover1 710:b2e1a2660ec2 680 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 710:b2e1a2660ec2 681 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 710:b2e1a2660ec2 682 uint16_t timeout = 0,
rgrover1 710:b2e1a2660ec2 683 bool activeScanning = false) {
rgrover1 710:b2e1a2660ec2 684 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 685 if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 686 ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 687 ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
rgrover1 710:b2e1a2660ec2 688 _scanningParams.setActiveScanning(activeScanning);
rgrover1 710:b2e1a2660ec2 689 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 690 }
rgrover1 710:b2e1a2660ec2 691
rgrover1 710:b2e1a2660ec2 692 return rc;
rgrover1 710:b2e1a2660ec2 693 }
rgrover1 710:b2e1a2660ec2 694
rgrover1 710:b2e1a2660ec2 695 /**
rgrover1 710:b2e1a2660ec2 696 * Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 697 * @param[in] interval
rgrover1 710:b2e1a2660ec2 698 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 699 *
rgrover1 710:b2e1a2660ec2 700 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 701 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 702 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 703 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 704 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 705 * interval.
rgrover1 710:b2e1a2660ec2 706 *
rgrover1 710:b2e1a2660ec2 707 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 708 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 709 */
rgrover1 710:b2e1a2660ec2 710 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 711 return _scanningParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 712 }
rgrover1 710:b2e1a2660ec2 713
rgrover1 710:b2e1a2660ec2 714 /**
rgrover1 710:b2e1a2660ec2 715 * Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 716 * @param[in] window
rgrover1 710:b2e1a2660ec2 717 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 718 *
rgrover1 710:b2e1a2660ec2 719 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 720 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 721 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 722 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 723 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 724 * interval.
rgrover1 710:b2e1a2660ec2 725 *
rgrover1 710:b2e1a2660ec2 726 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 727 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 728 */
rgrover1 710:b2e1a2660ec2 729 ble_error_t setScanWindow(uint16_t window) {
rgrover1 710:b2e1a2660ec2 730 return _scanningParams.setWindow(window);
rgrover1 710:b2e1a2660ec2 731 }
rgrover1 710:b2e1a2660ec2 732
rgrover1 710:b2e1a2660ec2 733 /**
rgrover1 710:b2e1a2660ec2 734 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 735 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 736 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 710:b2e1a2660ec2 737 *
rgrover1 710:b2e1a2660ec2 738 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 739 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 740 */
rgrover1 710:b2e1a2660ec2 741 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 710:b2e1a2660ec2 742 return _scanningParams.setTimeout(timeout);
rgrover1 710:b2e1a2660ec2 743 }
rgrover1 710:b2e1a2660ec2 744
rgrover1 710:b2e1a2660ec2 745 /**
rgrover1 710:b2e1a2660ec2 746 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 747 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 748 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 749 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 750 *
rgrover1 710:b2e1a2660ec2 751 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 752 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 753 */
rgrover1 710:b2e1a2660ec2 754 void setActiveScanning(bool activeScanning) {
rgrover1 710:b2e1a2660ec2 755 _scanningParams.setActiveScanning(activeScanning);
rgrover1 710:b2e1a2660ec2 756 }
rgrover1 710:b2e1a2660ec2 757
rgrover1 710:b2e1a2660ec2 758 /**
rgrover1 710:b2e1a2660ec2 759 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 710:b2e1a2660ec2 760 * effect.
rgrover1 710:b2e1a2660ec2 761 *
rgrover1 710:b2e1a2660ec2 762 * @param[in] callback
rgrover1 710:b2e1a2660ec2 763 * The application specific callback to be invoked upon
rgrover1 710:b2e1a2660ec2 764 * receiving every advertisement report. This can be passed in
rgrover1 710:b2e1a2660ec2 765 * as NULL, in which case scanning may not be enabled at all.
rgrover1 710:b2e1a2660ec2 766 */
rgrover1 710:b2e1a2660ec2 767 ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 768 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 769 if (callback) {
rgrover1 710:b2e1a2660ec2 770 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 771 onAdvertisementReport.attach(callback);
rgrover1 710:b2e1a2660ec2 772 }
rgrover1 710:b2e1a2660ec2 773 }
rgrover1 710:b2e1a2660ec2 774
rgrover1 710:b2e1a2660ec2 775 return err;
rgrover1 710:b2e1a2660ec2 776 }
rgrover1 710:b2e1a2660ec2 777
rgrover1 710:b2e1a2660ec2 778 /**
rgrover1 710:b2e1a2660ec2 779 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 710:b2e1a2660ec2 780 */
rgrover1 710:b2e1a2660ec2 781 template<typename T>
rgrover1 710:b2e1a2660ec2 782 ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 783 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 784 if (object && callbackMember) {
rgrover1 710:b2e1a2660ec2 785 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 786 onAdvertisementReport.attach(object, callbackMember);
rgrover1 710:b2e1a2660ec2 787 }
rgrover1 710:b2e1a2660ec2 788 }
rgrover1 710:b2e1a2660ec2 789
rgrover1 710:b2e1a2660ec2 790 return err;
rgrover1 710:b2e1a2660ec2 791 }
rgrover1 710:b2e1a2660ec2 792
rgrover1 753:0f60274cd3ad 793 /**
rgrover1 753:0f60274cd3ad 794 * Initialize radio-notification events to be generated from the stack.
rgrover1 753:0f60274cd3ad 795 * This API doesn't need to be called directly;
rgrover1 753:0f60274cd3ad 796 *
rgrover1 753:0f60274cd3ad 797 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 753:0f60274cd3ad 798 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 799 * radio is in use.
rgrover1 753:0f60274cd3ad 800 *
rgrover1 753:0f60274cd3ad 801 * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1 753:0f60274cd3ad 802 * signal is sent at the end of the Radio Event. These signals can be used
rgrover1 753:0f60274cd3ad 803 * by the application programmer to synchronize application logic with radio
rgrover1 753:0f60274cd3ad 804 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 753:0f60274cd3ad 805 * devices to manage peak current drawn during periods when the radio is on,
rgrover1 753:0f60274cd3ad 806 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 753:0f60274cd3ad 807 *
rgrover1 753:0f60274cd3ad 808 * @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
rgrover1 753:0f60274cd3ad 809 */
rgrover1 753:0f60274cd3ad 810 virtual ble_error_t initRadioNotification(void) {
rgrover1 753:0f60274cd3ad 811 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 753:0f60274cd3ad 812 }
rgrover1 753:0f60274cd3ad 813
rgrover1 710:b2e1a2660ec2 814 private:
rgrover1 710:b2e1a2660ec2 815 ble_error_t setAdvertisingData(void) {
rgrover1 710:b2e1a2660ec2 816 return setAdvertisingData(_advPayload, _scanResponse);
rgrover1 710:b2e1a2660ec2 817 }
rgrover1 710:b2e1a2660ec2 818
rgrover1 710:b2e1a2660ec2 819 private:
rgrover1 710:b2e1a2660ec2 820 virtual ble_error_t setAdvertisingData(const GapAdvertisingData &, const GapAdvertisingData &) = 0;
rgrover1 710:b2e1a2660ec2 821 virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
rgrover1 710:b2e1a2660ec2 822
rgrover1 710:b2e1a2660ec2 823 public:
rgrover1 710:b2e1a2660ec2 824 /**
rgrover1 710:b2e1a2660ec2 825 * Accessors to read back currently active advertising params.
rgrover1 710:b2e1a2660ec2 826 */
rgrover1 710:b2e1a2660ec2 827 GapAdvertisingParams &getAdvertisingParams(void) {
rgrover1 710:b2e1a2660ec2 828 return _advParams;
rgrover1 710:b2e1a2660ec2 829 }
rgrover1 710:b2e1a2660ec2 830 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 710:b2e1a2660ec2 831 return _advParams;
rgrover1 710:b2e1a2660ec2 832 }
rgrover1 710:b2e1a2660ec2 833
rgrover1 710:b2e1a2660ec2 834 /**
rgrover1 710:b2e1a2660ec2 835 * Setup a particular, user-constructed set of advertisement parameters for
rgrover1 710:b2e1a2660ec2 836 * the underlying stack. It would be uncommon for this API to be used
rgrover1 710:b2e1a2660ec2 837 * directly; there are other APIs to tweak advertisement parameters
rgrover1 710:b2e1a2660ec2 838 * individually.
rgrover1 710:b2e1a2660ec2 839 */
rgrover1 710:b2e1a2660ec2 840 void setAdvertisingParams(const GapAdvertisingParams &newParams) {
rgrover1 710:b2e1a2660ec2 841 _advParams = newParams;
rgrover1 710:b2e1a2660ec2 842 }
rgrover1 710:b2e1a2660ec2 843
rgrover1 710:b2e1a2660ec2 844 /* Event callback handlers. */
rgrover1 710:b2e1a2660ec2 845 public:
rgrover1 710:b2e1a2660ec2 846 /**
rgrover1 710:b2e1a2660ec2 847 * Setup a callback for timeout events. Refer to TimeoutSource_t for
rgrover1 710:b2e1a2660ec2 848 * possible event types.
rgrover1 710:b2e1a2660ec2 849 */
rgrover1 710:b2e1a2660ec2 850 void onTimeout(TimeoutEventCallback_t callback) {timeoutCallback = callback;}
rgrover1 710:b2e1a2660ec2 851
rgrover1 710:b2e1a2660ec2 852 /**
rgrover1 710:b2e1a2660ec2 853 * Setup a callback for connection events. Refer to ConnectionEventCallback_t.
rgrover1 710:b2e1a2660ec2 854 */
rgrover1 710:b2e1a2660ec2 855 void onConnection(ConnectionEventCallback_t callback) {connectionCallback = callback;}
rgrover1 710:b2e1a2660ec2 856
rgrover1 710:b2e1a2660ec2 857 /**
rgrover1 710:b2e1a2660ec2 858 * Set the application callback for disconnection events.
rgrover1 710:b2e1a2660ec2 859 * @param callback
rgrover1 710:b2e1a2660ec2 860 * Pointer to the unique callback.
rgrover1 710:b2e1a2660ec2 861 */
rgrover1 710:b2e1a2660ec2 862 void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallback = callback;}
rgrover1 710:b2e1a2660ec2 863
rgrover1 710:b2e1a2660ec2 864 /**
rgrover1 710:b2e1a2660ec2 865 * Append to a chain of callbacks to be invoked upon disconnection; these
rgrover1 710:b2e1a2660ec2 866 * callbacks receive no context and are therefore different from the
rgrover1 710:b2e1a2660ec2 867 * disconnectionCallback callback.
rgrover1 710:b2e1a2660ec2 868 * @param callback
rgrover1 710:b2e1a2660ec2 869 * function pointer to be invoked upon disconnection; receives no context.
rgrover1 710:b2e1a2660ec2 870 */
rgrover1 710:b2e1a2660ec2 871 template<typename T>
rgrover1 710:b2e1a2660ec2 872 void addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void)) {disconnectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 873
rgrover1 710:b2e1a2660ec2 874 /**
rgrover1 710:b2e1a2660ec2 875 * Set the application callback for radio-notification events.
rgrover1 710:b2e1a2660ec2 876 *
rgrover1 710:b2e1a2660ec2 877 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 710:b2e1a2660ec2 878 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 879 * radio is in use.
rgrover1 710:b2e1a2660ec2 880 *
rgrover1 710:b2e1a2660ec2 881 * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1 710:b2e1a2660ec2 882 * signal is sent at the end of the Radio Event. These signals can be used
rgrover1 710:b2e1a2660ec2 883 * by the application programmer to synchronize application logic with radio
rgrover1 710:b2e1a2660ec2 884 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 710:b2e1a2660ec2 885 * devices to manage peak current drawn during periods when the radio is on,
rgrover1 710:b2e1a2660ec2 886 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 710:b2e1a2660ec2 887 *
rgrover1 710:b2e1a2660ec2 888 * @param callback
rgrover1 710:b2e1a2660ec2 889 * The application handler to be invoked in response to a radio
rgrover1 710:b2e1a2660ec2 890 * ACTIVE/INACTIVE event.
rgrover1 754:9b391fb5c5d7 891 *
rgrover1 754:9b391fb5c5d7 892 * or in the other version:
rgrover1 754:9b391fb5c5d7 893 *
rgrover1 754:9b391fb5c5d7 894 * @param tptr
rgrover1 754:9b391fb5c5d7 895 * Pointer to the object of a class defining the member callback
rgrover1 754:9b391fb5c5d7 896 * function (mptr).
rgrover1 754:9b391fb5c5d7 897 * @param mptr
rgrover1 754:9b391fb5c5d7 898 * The member callback (within the context of an object) to be
rgrover1 754:9b391fb5c5d7 899 * invoked in response to a radio ACTIVE/INACTIVE event.
rgrover1 710:b2e1a2660ec2 900 */
rgrover1 753:0f60274cd3ad 901 void onRadioNotification(void (*callback)(bool param)) {
rgrover1 753:0f60274cd3ad 902 radioNotificationCallback.attach(callback);
rgrover1 753:0f60274cd3ad 903 initRadioNotification();
rgrover1 753:0f60274cd3ad 904 }
rgrover1 753:0f60274cd3ad 905 template <typename T>
rgrover1 753:0f60274cd3ad 906 void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
rgrover1 753:0f60274cd3ad 907 radioNotificationCallback.attach(tptr, mptr);
rgrover1 753:0f60274cd3ad 908 initRadioNotification();
rgrover1 753:0f60274cd3ad 909 }
rgrover1 710:b2e1a2660ec2 910
rgrover1 710:b2e1a2660ec2 911 protected:
rgrover1 710:b2e1a2660ec2 912 Gap() :
rgrover1 710:b2e1a2660ec2 913 _advParams(),
rgrover1 710:b2e1a2660ec2 914 _advPayload(),
rgrover1 710:b2e1a2660ec2 915 _scanningParams(),
rgrover1 710:b2e1a2660ec2 916 _scanResponse(),
rgrover1 710:b2e1a2660ec2 917 state(),
rgrover1 710:b2e1a2660ec2 918 timeoutCallback(NULL),
rgrover1 710:b2e1a2660ec2 919 connectionCallback(NULL),
rgrover1 710:b2e1a2660ec2 920 disconnectionCallback(NULL),
rgrover1 710:b2e1a2660ec2 921 radioNotificationCallback(),
rgrover1 710:b2e1a2660ec2 922 onAdvertisementReport(),
rgrover1 710:b2e1a2660ec2 923 disconnectionCallChain() {
rgrover1 710:b2e1a2660ec2 924 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 925 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 926 }
rgrover1 710:b2e1a2660ec2 927
rgrover1 710:b2e1a2660ec2 928 /* Entry points for the underlying stack to report events back to the user. */
rgrover1 710:b2e1a2660ec2 929 public:
rgrover1 710:b2e1a2660ec2 930 void processConnectionEvent(Handle_t handle,
rgrover1 710:b2e1a2660ec2 931 Role_t role,
rgrover1 710:b2e1a2660ec2 932 AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 933 const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 934 AddressType_t ownAddrType,
rgrover1 710:b2e1a2660ec2 935 const Address_t ownAddr,
rgrover1 710:b2e1a2660ec2 936 const ConnectionParams_t *connectionParams) {
rgrover1 710:b2e1a2660ec2 937 state.connected = 1;
rgrover1 710:b2e1a2660ec2 938 if (connectionCallback) {
rgrover1 710:b2e1a2660ec2 939 ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
rgrover1 710:b2e1a2660ec2 940 connectionCallback(&callbackParams);
rgrover1 710:b2e1a2660ec2 941 }
rgrover1 710:b2e1a2660ec2 942 }
rgrover1 710:b2e1a2660ec2 943
rgrover1 710:b2e1a2660ec2 944 void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
rgrover1 710:b2e1a2660ec2 945 state.connected = 0;
rgrover1 710:b2e1a2660ec2 946 if (disconnectionCallback) {
rgrover1 710:b2e1a2660ec2 947 disconnectionCallback(handle, reason);
rgrover1 710:b2e1a2660ec2 948 }
rgrover1 710:b2e1a2660ec2 949 disconnectionCallChain.call();
rgrover1 710:b2e1a2660ec2 950 }
rgrover1 710:b2e1a2660ec2 951
rgrover1 710:b2e1a2660ec2 952 void processAdvertisementReport(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 953 int8_t rssi,
rgrover1 710:b2e1a2660ec2 954 bool isScanResponse,
rgrover1 710:b2e1a2660ec2 955 GapAdvertisingParams::AdvertisingType_t type,
rgrover1 710:b2e1a2660ec2 956 uint8_t advertisingDataLen,
rgrover1 710:b2e1a2660ec2 957 const uint8_t *advertisingData) {
rgrover1 710:b2e1a2660ec2 958 AdvertisementCallbackParams_t params;
rgrover1 710:b2e1a2660ec2 959 memcpy(params.peerAddr, peerAddr, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 960 params.rssi = rssi;
rgrover1 710:b2e1a2660ec2 961 params.isScanResponse = isScanResponse;
rgrover1 710:b2e1a2660ec2 962 params.type = type;
rgrover1 710:b2e1a2660ec2 963 params.advertisingDataLen = advertisingDataLen;
rgrover1 710:b2e1a2660ec2 964 params.advertisingData = advertisingData;
rgrover1 710:b2e1a2660ec2 965 onAdvertisementReport.call(&params);
rgrover1 710:b2e1a2660ec2 966 }
rgrover1 710:b2e1a2660ec2 967
rgrover1 710:b2e1a2660ec2 968 void processTimeoutEvent(TimeoutSource_t source) {
rgrover1 710:b2e1a2660ec2 969 if (timeoutCallback) {
rgrover1 710:b2e1a2660ec2 970 timeoutCallback(source);
rgrover1 710:b2e1a2660ec2 971 }
rgrover1 710:b2e1a2660ec2 972 }
rgrover1 710:b2e1a2660ec2 973
rgrover1 710:b2e1a2660ec2 974 protected:
rgrover1 710:b2e1a2660ec2 975 GapAdvertisingParams _advParams;
rgrover1 710:b2e1a2660ec2 976 GapAdvertisingData _advPayload;
rgrover1 710:b2e1a2660ec2 977 GapScanningParams _scanningParams;
rgrover1 710:b2e1a2660ec2 978 GapAdvertisingData _scanResponse;
rgrover1 710:b2e1a2660ec2 979
rgrover1 710:b2e1a2660ec2 980 GapState_t state;
rgrover1 710:b2e1a2660ec2 981
rgrover1 710:b2e1a2660ec2 982 protected:
rgrover1 710:b2e1a2660ec2 983 TimeoutEventCallback_t timeoutCallback;
rgrover1 710:b2e1a2660ec2 984 ConnectionEventCallback_t connectionCallback;
rgrover1 710:b2e1a2660ec2 985 DisconnectionEventCallback_t disconnectionCallback;
rgrover1 710:b2e1a2660ec2 986 RadioNotificationEventCallback_t radioNotificationCallback;
rgrover1 710:b2e1a2660ec2 987 AdvertisementReportCallback_t onAdvertisementReport;
rgrover1 710:b2e1a2660ec2 988 CallChain disconnectionCallChain;
rgrover1 710:b2e1a2660ec2 989
rgrover1 710:b2e1a2660ec2 990 private:
rgrover1 710:b2e1a2660ec2 991 /* disallow copy and assignment */
rgrover1 710:b2e1a2660ec2 992 Gap(const Gap &);
rgrover1 710:b2e1a2660ec2 993 Gap& operator=(const Gap &);
rgrover1 710:b2e1a2660ec2 994 };
rgrover1 710:b2e1a2660ec2 995
rgrover1 710:b2e1a2660ec2 996 #endif // ifndef __GAP_H__