Fork of the UniGraphic-Library for monochrome LCDs with ST7920 controller and 128x64-IIC-OLED-Display with SH1106-Controller

Revision 10:668cf78ff93a, committed 2015-02-19

Comitter:

Geremia

Date:

Thu Feb 19 00:33:27 2015 +0000

Parent:

9:1749ae993cfe

Child:

11:b842b8e332cb

Commit message:

Added FastWindow for TFT (truncated set page/column cmds), which increases speed when plotting single pixels (around 20-25% faster?!?!)

Changed in this revision

--- a/Display/LCD.h	Tue Feb 17 22:35:07 2015 +0000
+++ b/Display/LCD.h	Thu Feb 19 00:33:27 2015 +0000
@@ -148,6 +148,7 @@
     void setscrollarea (int startY, int areasize){};
     void scroll (int lines){};
     void scrollreset(){};
+    void FastWindow(bool enable){};
     
     unsigned int tftID;
     

--- a/Display/TFT.cpp	Tue Feb 17 22:35:07 2015 +0000
+++ b/Display/TFT.cpp	Thu Feb 19 00:33:27 2015 +0000
@@ -36,6 +36,8 @@
     set_auto_up(false); //we don't have framebuffer
     topfixedareasize=0;
     scrollareasize=0;
+    usefastwindow=false;
+    fastwindowready=false;
   //  cls();
   //  locate(0,0);
 }
@@ -60,6 +62,8 @@
     set_auto_up(false);
     topfixedareasize=0;
     scrollareasize=0;
+    usefastwindow=false;
+    fastwindowready=false;
   //  locate(0,0);
 }
 void TFT::wr_cmd8(unsigned char cmd)
@@ -157,11 +161,14 @@
     if(o == 0) wr_cmd8(0x20);
     else wr_cmd8(0x21);
 }
+void TFT::FastWindow(bool enable)
+    {
+        usefastwindow=enable;
+    }
 // TFT have both column and raw autoincrement inside a window, with internal counters
 void TFT::window(int x, int y, int w, int h)
 {
-    //ili9486 does not like truncated 2A/2B cmds, at least in par mode
-    //setting only start column/page would speedup, but needs a windowmax() before, maybe implement later
+    fastwindowready=false; // end raw/column going to be set to lower value than bottom-right corner
     wr_cmd8(0x2A);
     wr_data16(x);   //start column
     wr_data16(x+w-1);//end column
@@ -174,6 +181,7 @@
 }
 void TFT::window4read(int x, int y, int w, int h)
 {
+    fastwindowready=false;
     wr_cmd8(0x2A);
     wr_data16(x);   //start column
     wr_data16(x+w-1);//end column
@@ -186,14 +194,47 @@
 }
 void TFT::pixel(int x, int y, unsigned short color)
 {
-    window(x,y,1,1);
+    if(usefastwindow) //ili9486 does not like truncated 2A/2B cmds, at least in par mode
+    {
+        if(fastwindowready) //setting only start column/page does speedup, but needs end raw/column previously set to bottom-right corner
+        {
+            wr_cmd8(0x2A);
+            wr_data16(x);   //start column only
+            wr_cmd8(0x2B);
+            wr_data16(y);   //start page only
+            wr_cmd8(0x2C);  //write mem, just send pixels color next
+        }
+        else
+        {
+            window(x,y,width()-x,height()-y); // set also end raw/column to bottom-right corner
+            fastwindowready=true;
+        }
+    }
+    else window(x,y,1,1);
   //  proto->wr_gram(color);   // 2C expects 16bit parameters
     wr_gram(color);
 }
 unsigned short TFT::pixelread(int x, int y)
 {
+    if(usefastwindow) //ili9486 does not like truncated 2A/2B cmds, at least in par mode
+    {
+        if(fastwindowready) //setting only start column/page does speedup, but needs end raw/column previously set to bottom-right corner
+        {
+            wr_cmd8(0x2A);
+            wr_data16(x);   //start column only
+            wr_cmd8(0x2B);
+            wr_data16(y);   //start page only
+            wr_cmd8(0x2E);  //read mem, just pixelread next
+        }
+        else
+        {
+            window4read(x,y,width()-x,height()-y); // set also end raw/column to bottom-right corner
+            fastwindowready=true;
+        }
+    }
+    else window4read(x,y,1,1);
+    
     unsigned short color;
-    window4read(x,y,1,1);
   //  proto->wr_gram(color);   // 2C expects 16bit parameters
     color = rd_gram();
     if(mipistd) color = BGR2RGB(color); // in case, convert BGR to RGB (should depend on cmd36 bit3) but maybe is device specific

--- a/Display/TFT.h	Tue Feb 17 22:35:07 2015 +0000
+++ b/Display/TFT.h	Thu Feb 19 00:33:27 2015 +0000
@@ -110,10 +110,17 @@
     virtual void set_orientation(int o);
     
     /** Set ChipSelect high or low
-    * @param enable 0/1   
+    * @param enable true/false   
     */
     virtual void BusEnable(bool enable);
     
+    /** Enable fast window (default disabled)
+    * used to speedup functions that plots single pixels, like circle, oblique lines or just sparse pixels
+    * @param enable true/false
+    * @note most but not all controllers support this, even if datasheet tells they should
+    */
+    void FastWindow(bool enable);
+    
     /** Set scroll area boundaries
     * scroll is done in hw but only on the native vertical axis
     * TFTs are mainly native protrait view, so horizontal scroll if rotated in landscape view
@@ -232,6 +239,7 @@
     unsigned int scrollbugfix;
     bool mipistd;
     
+    
 private:
 
     Protocols* proto;
@@ -249,6 +257,9 @@
     int topfixedareasize;
     int scrollareasize;
     bool useNOP;
+    bool usefastwindow;
+    bool fastwindowready;
+    
 };
 
 #endif
\ No newline at end of file

--- a/Graphics/GraphicsDisplay.h	Tue Feb 17 22:35:07 2015 +0000
+++ b/Graphics/GraphicsDisplay.h	Thu Feb 19 00:33:27 2015 +0000
@@ -69,9 +69,6 @@
     * @param color defines the color for the pixel.
     */
     virtual void pixel(int x, int y, unsigned short color) = 0;
-
-    
-        
     
     /** Set the window, which controls where items are written to the screen.
     * When something hits the window width, it wraps back to the left side

--- a/Inits/ILI9341.cpp	Tue Feb 17 22:35:07 2015 +0000
+++ b/Inits/ILI9341.cpp	Thu Feb 19 00:33:27 2015 +0000
@@ -25,6 +25,7 @@
     init();
     set_orientation(0);
     cls();
+    FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. 
     locate(0,0); 
 }
 ILI9341::ILI9341(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char *name, unsigned int LCDSIZE_X , unsigned  int LCDSIZE_Y)
@@ -35,6 +36,7 @@
     identify(); // will collect tftID and set mipistd flag
     init(); // per display custom init cmd sequence, implemented here
     set_orientation(0); //TFT class does for MIPI standard and some ILIxxx
+    FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. 
     cls();
     locate(0,0); 
 }

--- a/Inits/ILI9486.cpp	Tue Feb 17 22:35:07 2015 +0000
+++ b/Inits/ILI9486.cpp	Thu Feb 19 00:33:27 2015 +0000
@@ -23,6 +23,7 @@
     identify(); // will collect tftID and set mipistd flag
     init();
     set_orientation(0);
+ //   FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. ILI9486 does not, at least in par mode
     cls();
     locate(0,0); 
 }
@@ -34,6 +35,7 @@
     identify(); // will collect tftID and set mipistd flag
     init(); // per display custom init cmd sequence, implemented here
     set_orientation(0); //TFT class does for MIPI standard and some ILIxxx
+ //   FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. ILI9486 does not, at least in par mode
     cls();
     locate(0,0); 
 }

--- a/Inits/TFT_MIPI.cpp	Tue Feb 17 22:35:07 2015 +0000
+++ b/Inits/TFT_MIPI.cpp	Thu Feb 19 00:33:27 2015 +0000
@@ -24,6 +24,7 @@
     init();
 //    scrollbugfix=1; // when scrolling 1 line, the last line disappears, set to 1 to fix it, for ili9481 is set automatically in identify()
     set_orientation(0);
+ //   FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. Give a try
     cls();
     locate(0,0); 
 }
@@ -36,6 +37,7 @@
     init(); // per display custom init cmd sequence, implemented here
  //   scrollbugfix=1; // when scrolling 1 line, the last line disappears, set to 1 to fix it, for ili9481 is set automatically in identify()
     set_orientation(0); //TFT class does for MIPI standard and some ILIxxx
+ //   FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. Give a try
     cls();
     locate(0,0); 
 }