Carlos Silva / 24_TFT_STMNUCLEO

Code to run the cheap 2.4" TFT made by mcufriend.com on the STM nucleo. No modifications required, this plugs into the arduino header.

Dependents:   ST7735_V2_STM32F407

Fork of TFTLCD_8bit by Thiha Electronics

ssd1289.h@29:060b167a46ba, 2014-06-30 (annotated)

Committer:
cdtsilva
Date:
Mon Jun 30 17:29:42 2014 +0000
Revision:
29:060b167a46ba
Parent:
24:ac6e35658037 
This is a modified Library to work with the ST Nucleo and the Cheap Red PCB 2.4" TFT displays from china.

; No modifications required, just plug the shield into the arduino header.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
ttodorov 4:3ac4239f6c9c 1 /** \file ssd1289.h
ttodorov 0:881ff0b71102 2 * \brief mbed TFT LCD controller for displays with the SSD1289 IC.
ttodorov 0:881ff0b71102 3 * \copyright GNU Public License, v2. or later
ttodorov 0:881ff0b71102 4 *
ttodorov 0:881ff0b71102 5 * A known display with this type of controller chip is the ITDB02-3.2S
ttodorov 0:881ff0b71102 6 * from http://imall.iteadstudio.com
ttodorov 0:881ff0b71102 7 *
ttodorov 0:881ff0b71102 8 * This library is based on the Arduino/chipKIT UTFT library by Henning
ttodorov 0:881ff0b71102 9 * Karlsen, http://henningkarlsen.com/electronics/library.php?id=52
ttodorov 0:881ff0b71102 10 *
ttodorov 0:881ff0b71102 11 * Copyright (C)2010-2012 Henning Karlsen. All right reserved.
ttodorov 5:09b6d228ceea 12 *
ttodorov 0:881ff0b71102 13 * Copyright (C)2012 Todor Todorov.
ttodorov 0:881ff0b71102 14 *
ttodorov 0:881ff0b71102 15 * This library is free software; you can redistribute it and/or
ttodorov 0:881ff0b71102 16 * modify it under the terms of the GNU Lesser General Public
ttodorov 0:881ff0b71102 17 * License as published by the Free Software Foundation; either
ttodorov 0:881ff0b71102 18 * version 2.1 of the License, or (at your option) any later version.
ttodorov 0:881ff0b71102 19 *
ttodorov 0:881ff0b71102 20 * This library is distributed in the hope that it will be useful,
ttodorov 0:881ff0b71102 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
ttodorov 0:881ff0b71102 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
ttodorov 0:881ff0b71102 23 * Lesser General Public License for more details.
ttodorov 0:881ff0b71102 24 *
ttodorov 0:881ff0b71102 25 * You should have received a copy of the GNU Lesser General Public
ttodorov 0:881ff0b71102 26 * License along with this library; if not, write to:
ttodorov 0:881ff0b71102 27 *
ttodorov 0:881ff0b71102 28 * Free Software Foundation, Inc.
ttodorov 0:881ff0b71102 29 * 51 Franklin St, 5th Floor, Boston, MA 02110-1301, USA
ttodorov 0:881ff0b71102 30 *
ttodorov 0:881ff0b71102 31 *********************************************************************/
ttodorov 3:64a5b67d5b51 32 #ifndef TFTLCD_SSD1289_H
ttodorov 3:64a5b67d5b51 33 #define TFTLCD_SSD1289_H
ttodorov 0:881ff0b71102 34
ttodorov 0:881ff0b71102 35 #include "lcd_base.h"
ttodorov 0:881ff0b71102 36
ttodorov 6:059ca1648211 37 #ifdef __cplusplus
ttodorov 6:059ca1648211 38 extern "C" {
ttodorov 6:059ca1648211 39 #endif
ttodorov 6:059ca1648211 40
ttodorov 3:64a5b67d5b51 41 /** Represents a LCD instance.
ttodorov 3:64a5b67d5b51 42 *
ttodorov 3:64a5b67d5b51 43 * This is the utility class, through which the display can be manipulated
ttodorov 3:64a5b67d5b51 44 * and graphics objects can be shown to the user. A known display, which
ttodorov 3:64a5b67d5b51 45 * works with this library is the ITDB02-3.2S from iTeadStudio - a RGB TFT
ttodorov 3:64a5b67d5b51 46 * with 240x320 pixels resolution and 65K colors, using 16-bit interface.
ttodorov 3:64a5b67d5b51 47 *
ttodorov 4:3ac4239f6c9c 48 * The display needs 20 to 22 pins to work with mbed, so it is possibly not
ttodorov 3:64a5b67d5b51 49 * the best of choices out there, but other than that it uses +3.3V for
ttodorov 3:64a5b67d5b51 50 * power and logic, as well as the backlight, thus can be interfaced directly
ttodorov 3:64a5b67d5b51 51 * to the mbed without the need of shields or level shifters as with Arduino.
ttodorov 3:64a5b67d5b51 52 *
ttodorov 3:64a5b67d5b51 53 * How to use:
ttodorov 3:64a5b67d5b51 54 * \code
ttodorov 3:64a5b67d5b51 55 * // include the library, this will also pull in the header for the provided fonts
ttodorov 3:64a5b67d5b51 56 * #include "ssd1289.h"
ttodorov 3:64a5b67d5b51 57 *
ttodorov 3:64a5b67d5b51 58 * // prepare the data bus for writing commands and pixel data
ttodorov 3:64a5b67d5b51 59 * BusOut dataBus( p30, p29, p28, p27, p26, p25, p24, p23, p22, p21, p20, p19, p18, p17, p16, p15 ); // 16 pins
ttodorov 3:64a5b67d5b51 60 * // create the lcd instance
ttodorov 4:3ac4239f6c9c 61 * SSD1289_LCD lcd( p14, p13, p12, p11, &dataBus ); // control pins and data bus
ttodorov 3:64a5b67d5b51 62 *
ttodorov 3:64a5b67d5b51 63 * int main()
ttodorov 3:64a5b67d5b51 64 * {
ttodorov 3:64a5b67d5b51 65 * // initialize display - place it in standard portrait mode and set background to black and
ttodorov 3:64a5b67d5b51 66 * // foreground to white color.
ttodorov 3:64a5b67d5b51 67 * lcd.Initialize();
ttodorov 3:64a5b67d5b51 68 * // set current font to the smallest 8x12 pixels font.
ttodorov 3:64a5b67d5b51 69 * lcd.SetFont( Font8x12 );
ttodorov 3:64a5b67d5b51 70 * // print something on the screen
ttodorov 3:64a5b67d5b51 71 * lcd.Print( "Hello, World!", CENTER, 25 ); // align text to center horizontally and use starndard colors
ttodorov 3:64a5b67d5b51 72 *
ttodorov 3:64a5b67d5b51 73 * while ( 1 ) { }
ttodorov 3:64a5b67d5b51 74 * }
ttodorov 3:64a5b67d5b51 75 *
ttodorov 3:64a5b67d5b51 76 * \endcode
ttodorov 3:64a5b67d5b51 77 * \version 0.1
ttodorov 3:64a5b67d5b51 78 * \author Todor Todorov
ttodorov 3:64a5b67d5b51 79 */
ttodorov 4:3ac4239f6c9c 80 class SSD1289_LCD : public LCD
ttodorov 0:881ff0b71102 81 {
ttodorov 0:881ff0b71102 82 public:
ttodorov 0:881ff0b71102 83 /** Creates a new instance of the class.
ttodorov 0:881ff0b71102 84 *
ttodorov 0:881ff0b71102 85 * \param CS Pin for the ChipSelect signal.
ttodorov 0:881ff0b71102 86 * \param RESET Pin for the RESET line.
ttodorov 0:881ff0b71102 87 * \param RS Pin for the RS signal.
ttodorov 0:881ff0b71102 88 * \param WR Pin for the WR signal.
ttodorov 0:881ff0b71102 89 * \param DATA_PORT Address of the data bus for transfer of commands and pixel data.
ttodorov 4:3ac4239f6c9c 90 * \param BL Pin for controlling the backlight. By default not used.
ttodorov 0:881ff0b71102 91 * \param RD Pin for the RD signal. This line is not needed by the driver, so if you would like to
ttodorov 0:881ff0b71102 92 * use the pin on the mbed for something else, just pull-up the respective pin on the LCD high,
ttodorov 0:881ff0b71102 93 * and do not assign a value to this parameter when creating the controller instance.
ttodorov 22:4c169297f374 94 * \param blType The backlight type, the default is to utilize the pin - if supplied - as a simple on/off switch
ttodorov 22:4c169297f374 95 * \param defaultBacklightLevel If using PWM to control backlight, this would be the default brightness in percent after LCD initialization.
ttodorov 0:881ff0b71102 96 */
ttodorov 22:4c169297f374 97 SSD1289_LCD( PinName CS, PinName RESET, PinName RS, PinName WR, BusOut* DATA_PORT, PinName BL = NC, PinName RD = NC, backlight_t blType = Constant, float defaultBackLightLevel = 1.0 );
ttodorov 0:881ff0b71102 98
ttodorov 0:881ff0b71102 99 /** Initialize display.
ttodorov 0:881ff0b71102 100 *
ttodorov 0:881ff0b71102 101 * Wakes up the display from sleep, initializes power parameters.
ttodorov 0:881ff0b71102 102 * This function must be called first, befor any painting on the
ttodorov 0:881ff0b71102 103 * display is done, otherwise the positioning of graphical elements
ttodorov 0:881ff0b71102 104 * will not work properly and any paynt operation will not be visible
ttodorov 0:881ff0b71102 105 * or produce garbage.
ttodorov 0:881ff0b71102 106 *
ttodorov 0:881ff0b71102 107 * \param oritentation The display orientation, landscape is default.
ttodorov 12:d0978272a340 108 * \param colors The correct color depth to use for the pixel data. Value is disregarded.
ttodorov 0:881ff0b71102 109 */
ttodorov 12:d0978272a340 110 virtual void Initialize( orientation_t orientation = LANDSCAPE, colordepth_t colors = RGB16 );
ttodorov 0:881ff0b71102 111
ttodorov 4:3ac4239f6c9c 112 /** Puts the display to sleep.
ttodorov 4:3ac4239f6c9c 113 *
ttodorov 4:3ac4239f6c9c 114 * When the display is in sleep mode, its power consumption is
ttodorov 4:3ac4239f6c9c 115 * minimized. Before new pixel data can be written to the display
ttodorov 4:3ac4239f6c9c 116 * memory, the controller needs to be brought out of sleep mode.
ttodorov 4:3ac4239f6c9c 117 * \sa #WakeUp( void );
ttodorov 4:3ac4239f6c9c 118 * \remarks The result of this operation might not be exactly as
ttodorov 4:3ac4239f6c9c 119 * expected. Putting the display to sleep will cause the
ttodorov 4:3ac4239f6c9c 120 * controller to switch to the standard color of the LCD,
ttodorov 4:3ac4239f6c9c 121 * so depending on whether the display is normally white,
ttodorov 4:3ac4239f6c9c 122 * or normally dark, the screen might or might not go
ttodorov 4:3ac4239f6c9c 123 * dark. Additional power saving can be achieved, if
ttodorov 4:3ac4239f6c9c 124 * the backlight of the used display is not hardwired on
ttodorov 4:3ac4239f6c9c 125 * the PCB and can be controlled via the BL pin.
ttodorov 4:3ac4239f6c9c 126 */
ttodorov 4:3ac4239f6c9c 127 virtual void Sleep( void );
ttodorov 4:3ac4239f6c9c 128
ttodorov 4:3ac4239f6c9c 129 /** Wakes up the display from sleep mode.
ttodorov 4:3ac4239f6c9c 130 *
ttodorov 4:3ac4239f6c9c 131 * This function needs to be called before any other, when the
ttodorov 4:3ac4239f6c9c 132 * display has been put into sleep mode by a previois call to
ttodorov 4:3ac4239f6c9c 133 * #Sleep( void ).
ttodorov 4:3ac4239f6c9c 134 */
ttodorov 4:3ac4239f6c9c 135 virtual void WakeUp( void );
ttodorov 4:3ac4239f6c9c 136
ttodorov 0:881ff0b71102 137 protected:
ttodorov 4:3ac4239f6c9c 138 /** Sends a command to the display.
ttodorov 4:3ac4239f6c9c 139 *
ttodorov 4:3ac4239f6c9c 140 * \param cmd The display command.
ttodorov 4:3ac4239f6c9c 141 * \remarks Commands are controller-specific and this function needs to
ttodorov 4:3ac4239f6c9c 142 * be implemented separately for each available controller.
ttodorov 4:3ac4239f6c9c 143 */
ttodorov 2:81ed304b7e9b 144 virtual void WriteCmd( unsigned short cmd );
ttodorov 4:3ac4239f6c9c 145
ttodorov 4:3ac4239f6c9c 146 /** Sends pixel data to the display.
ttodorov 4:3ac4239f6c9c 147 *
ttodorov 4:3ac4239f6c9c 148 * \param data The display data.
ttodorov 24:ac6e35658037 149 * \remarks Sending data is controller-specific and this function needs to
ttodorov 4:3ac4239f6c9c 150 * be implemented separately for each available controller.
ttodorov 4:3ac4239f6c9c 151 */
ttodorov 2:81ed304b7e9b 152 virtual void WriteData( unsigned short data );
ttodorov 4:3ac4239f6c9c 153
ttodorov 4:3ac4239f6c9c 154 /** Assigns a chunk of the display memory to receive data.
ttodorov 4:3ac4239f6c9c 155 *
ttodorov 4:3ac4239f6c9c 156 * When data is sent to the display after this function completes, the opertion will
ttodorov 4:3ac4239f6c9c 157 * start from the begining of the assigned address (pixel position) and the pointer
ttodorov 4:3ac4239f6c9c 158 * will be automatically incremented so that the next data write operation will continue
ttodorov 4:3ac4239f6c9c 159 * with the next pixel from the memory block. If more data is written than available
ttodorov 4:3ac4239f6c9c 160 * pixels, at the end of the block the pointer will jump back to its beginning and
ttodorov 4:3ac4239f6c9c 161 * commence again, until the next address change command is sent to the display.
ttodorov 4:3ac4239f6c9c 162 *
ttodorov 4:3ac4239f6c9c 163 * \param x1 The X coordinate of the pixel at the beginning of the block.
ttodorov 4:3ac4239f6c9c 164 * \param y1 The Y coordinate of the pixel at the beginning of the block.
ttodorov 4:3ac4239f6c9c 165 * \param x2 The X coordinate of the pixel at the end of the block.
ttodorov 4:3ac4239f6c9c 166 * \param y2 The Y coordinate of the pixel at the end of the block.
ttodorov 4:3ac4239f6c9c 167 * \remarks Addressing commands are controller-specific and this function needs to be
ttodorov 4:3ac4239f6c9c 168 * implemented separately for each available controller.
ttodorov 4:3ac4239f6c9c 169 */
ttodorov 20:4bdca8d8dadc 170 virtual void SetXY( unsigned short x1, unsigned short y1, unsigned short x2, unsigned short y2 );
ttodorov 0:881ff0b71102 171
ttodorov 10:69571adcfad5 172 /** Sets the color of the pixel at the address pointer of the controller.
ttodorov 10:69571adcfad5 173 *
ttodorov 10:69571adcfad5 174 * This function is to be provided by each implementation separately in
ttodorov 10:69571adcfad5 175 * order to account for different color depth used by the controller.
ttodorov 10:69571adcfad5 176 * \param color The color of the pixel.
ttodorov 20:4bdca8d8dadc 177 * \param mode The depth (palette) of the color.
ttodorov 10:69571adcfad5 178 */
ttodorov 20:4bdca8d8dadc 179 virtual void SetPixelColor( unsigned int color, colordepth_t mode = RGB24 );
ttodorov 10:69571adcfad5 180
ttodorov 0:881ff0b71102 181 private:
ttodorov 4:3ac4239f6c9c 182 DigitalOut _lcd_pin_wr;
ttodorov 4:3ac4239f6c9c 183 BusOut* _lcd_port;
ttodorov 4:3ac4239f6c9c 184 DigitalOut* _lcd_pin_bl;
ttodorov 0:881ff0b71102 185 DigitalOut* _lcd_pin_rd;
ttodorov 0:881ff0b71102 186 };
ttodorov 0:881ff0b71102 187
ttodorov 6:059ca1648211 188 #ifdef __cplusplus
ttodorov 6:059ca1648211 189 }
ttodorov 6:059ca1648211 190 #endif
ttodorov 6:059ca1648211 191
ttodorov 3:64a5b67d5b51 192 #endif /* TFTLCD_SSD1289_H */