CARLO TARALLO / BLE_API

prova invio BLE

Dependents:   BLE_HeartRate_IDB04A1

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@955:9228741f4c19, 2015-11-26 (annotated)

Committer:
rgrover1
Date:
Thu Nov 26 12:52:33 2015 +0000
Revision:
955:9228741f4c19
Parent:
954:8b33ea639a1f
Child:
956:21f1330d61de
Synchronized with git rev 0383194a

Author: Vincent Coubard

Add DisconnectionEventCAllbackChain accessor

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 710:b2e1a2660ec2 1 /* mbed Microcontroller Library
rgrover1 710:b2e1a2660ec2 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 710:b2e1a2660ec2 3 *
rgrover1 710:b2e1a2660ec2 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 710:b2e1a2660ec2 5 * you may not use this file except in compliance with the License.
rgrover1 710:b2e1a2660ec2 6 * You may obtain a copy of the License at
rgrover1 710:b2e1a2660ec2 7 *
rgrover1 710:b2e1a2660ec2 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 710:b2e1a2660ec2 9 *
rgrover1 710:b2e1a2660ec2 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 710:b2e1a2660ec2 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 710:b2e1a2660ec2 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 710:b2e1a2660ec2 13 * See the License for the specific language governing permissions and
rgrover1 710:b2e1a2660ec2 14 * limitations under the License.
rgrover1 710:b2e1a2660ec2 15 */
rgrover1 710:b2e1a2660ec2 16
rgrover1 710:b2e1a2660ec2 17 #ifndef __GAP_H__
rgrover1 710:b2e1a2660ec2 18 #define __GAP_H__
rgrover1 710:b2e1a2660ec2 19
rgrover1 710:b2e1a2660ec2 20 #include "GapAdvertisingData.h"
rgrover1 710:b2e1a2660ec2 21 #include "GapAdvertisingParams.h"
rgrover1 710:b2e1a2660ec2 22 #include "GapScanningParams.h"
rgrover1 710:b2e1a2660ec2 23 #include "GapEvents.h"
rgrover1 829:9072de50087b 24 #include "CallChainOfFunctionPointersWithContext.h"
rgrover1 710:b2e1a2660ec2 25 #include "FunctionPointerWithContext.h"
rgrover1 710:b2e1a2660ec2 26
rgrover1 937:4932e700daf2 27 /* Forward declarations for classes that will only be used for pointers or references in the following. */
rgrover1 710:b2e1a2660ec2 28 class GapAdvertisingParams;
rgrover1 710:b2e1a2660ec2 29 class GapScanningParams;
rgrover1 710:b2e1a2660ec2 30 class GapAdvertisingData;
rgrover1 710:b2e1a2660ec2 31
rgrover1 710:b2e1a2660ec2 32 class Gap {
rgrover1 710:b2e1a2660ec2 33 public:
rgrover1 710:b2e1a2660ec2 34 enum AddressType_t {
rgrover1 710:b2e1a2660ec2 35 ADDR_TYPE_PUBLIC = 0,
rgrover1 710:b2e1a2660ec2 36 ADDR_TYPE_RANDOM_STATIC,
rgrover1 710:b2e1a2660ec2 37 ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE,
rgrover1 710:b2e1a2660ec2 38 ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE
rgrover1 710:b2e1a2660ec2 39 };
rgrover1 937:4932e700daf2 40 typedef enum AddressType_t addr_type_t; /* @Note: Deprecated. Use AddressType_t instead. */
rgrover1 710:b2e1a2660ec2 41
rgrover1 710:b2e1a2660ec2 42 static const unsigned ADDR_LEN = 6;
rgrover1 710:b2e1a2660ec2 43 typedef uint8_t Address_t[ADDR_LEN]; /* 48-bit address, LSB format. */
rgrover1 937:4932e700daf2 44 typedef Address_t address_t; /* @Note: Deprecated. Use Address_t instead. */
rgrover1 710:b2e1a2660ec2 45
rgrover1 710:b2e1a2660ec2 46 enum TimeoutSource_t {
rgrover1 710:b2e1a2660ec2 47 TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
rgrover1 710:b2e1a2660ec2 48 TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
rgrover1 710:b2e1a2660ec2 49 TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
rgrover1 710:b2e1a2660ec2 50 TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
rgrover1 710:b2e1a2660ec2 51 };
rgrover1 710:b2e1a2660ec2 52
rgrover1 710:b2e1a2660ec2 53 /**
rgrover1 710:b2e1a2660ec2 54 * Enumeration for disconnection reasons. The values for these reasons are
rgrover1 937:4932e700daf2 55 * derived from Nordic's implementation, but the reasons are meant to be
rgrover1 937:4932e700daf2 56 * independent of the transport. If you are returned a reason that is not
rgrover1 937:4932e700daf2 57 * covered by this enumeration, please refer to the underlying
rgrover1 710:b2e1a2660ec2 58 * transport library.
rgrover1 710:b2e1a2660ec2 59 */
rgrover1 710:b2e1a2660ec2 60 enum DisconnectionReason_t {
rgrover1 710:b2e1a2660ec2 61 CONNECTION_TIMEOUT = 0x08,
rgrover1 710:b2e1a2660ec2 62 REMOTE_USER_TERMINATED_CONNECTION = 0x13,
rgrover1 937:4932e700daf2 63 REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote device terminated connection due to low resources.*/
rgrover1 937:4932e700daf2 64 REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote device terminated connection due to power off. */
rgrover1 710:b2e1a2660ec2 65 LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
rgrover1 710:b2e1a2660ec2 66 CONN_INTERVAL_UNACCEPTABLE = 0x3B,
rgrover1 710:b2e1a2660ec2 67 };
rgrover1 710:b2e1a2660ec2 68
rgrover1 937:4932e700daf2 69 /* Describes the current state of the device (more than one bit can be set). */
rgrover1 710:b2e1a2660ec2 70 struct GapState_t {
rgrover1 937:4932e700daf2 71 unsigned advertising : 1; /**< Peripheral is currently advertising. */
rgrover1 937:4932e700daf2 72 unsigned connected : 1; /**< Peripheral is connected to a central. */
rgrover1 710:b2e1a2660ec2 73 };
rgrover1 710:b2e1a2660ec2 74
rgrover1 710:b2e1a2660ec2 75 typedef uint16_t Handle_t; /* Type for connection handle. */
rgrover1 710:b2e1a2660ec2 76
rgrover1 710:b2e1a2660ec2 77 typedef struct {
rgrover1 710:b2e1a2660ec2 78 uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 79 uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 80 uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 81 uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 82 } ConnectionParams_t;
rgrover1 710:b2e1a2660ec2 83
rgrover1 710:b2e1a2660ec2 84 enum Role_t {
rgrover1 710:b2e1a2660ec2 85 PERIPHERAL = 0x1, /**< Peripheral Role. */
rgrover1 710:b2e1a2660ec2 86 CENTRAL = 0x2, /**< Central Role. */
rgrover1 710:b2e1a2660ec2 87 };
rgrover1 710:b2e1a2660ec2 88
rgrover1 710:b2e1a2660ec2 89 struct AdvertisementCallbackParams_t {
rgrover1 710:b2e1a2660ec2 90 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 91 int8_t rssi;
rgrover1 710:b2e1a2660ec2 92 bool isScanResponse;
rgrover1 710:b2e1a2660ec2 93 GapAdvertisingParams::AdvertisingType_t type;
rgrover1 710:b2e1a2660ec2 94 uint8_t advertisingDataLen;
rgrover1 710:b2e1a2660ec2 95 const uint8_t *advertisingData;
rgrover1 710:b2e1a2660ec2 96 };
rgrover1 710:b2e1a2660ec2 97 typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
rgrover1 710:b2e1a2660ec2 98
rgrover1 710:b2e1a2660ec2 99 struct ConnectionCallbackParams_t {
rgrover1 710:b2e1a2660ec2 100 Handle_t handle;
rgrover1 710:b2e1a2660ec2 101 Role_t role;
rgrover1 710:b2e1a2660ec2 102 AddressType_t peerAddrType;
rgrover1 710:b2e1a2660ec2 103 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 104 AddressType_t ownAddrType;
rgrover1 710:b2e1a2660ec2 105 Address_t ownAddr;
rgrover1 710:b2e1a2660ec2 106 const ConnectionParams_t *connectionParams;
rgrover1 710:b2e1a2660ec2 107
rgrover1 710:b2e1a2660ec2 108 ConnectionCallbackParams_t(Handle_t handleIn,
rgrover1 710:b2e1a2660ec2 109 Role_t roleIn,
rgrover1 710:b2e1a2660ec2 110 AddressType_t peerAddrTypeIn,
rgrover1 710:b2e1a2660ec2 111 const uint8_t *peerAddrIn,
rgrover1 710:b2e1a2660ec2 112 AddressType_t ownAddrTypeIn,
rgrover1 710:b2e1a2660ec2 113 const uint8_t *ownAddrIn,
rgrover1 710:b2e1a2660ec2 114 const ConnectionParams_t *connectionParamsIn) :
rgrover1 710:b2e1a2660ec2 115 handle(handleIn),
rgrover1 710:b2e1a2660ec2 116 role(roleIn),
rgrover1 710:b2e1a2660ec2 117 peerAddrType(peerAddrTypeIn),
rgrover1 710:b2e1a2660ec2 118 peerAddr(),
rgrover1 710:b2e1a2660ec2 119 ownAddrType(ownAddrTypeIn),
rgrover1 710:b2e1a2660ec2 120 ownAddr(),
rgrover1 710:b2e1a2660ec2 121 connectionParams(connectionParamsIn) {
rgrover1 710:b2e1a2660ec2 122 memcpy(peerAddr, peerAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 123 memcpy(ownAddr, ownAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 124 }
rgrover1 710:b2e1a2660ec2 125 };
rgrover1 710:b2e1a2660ec2 126
rgrover1 829:9072de50087b 127 struct DisconnectionCallbackParams_t {
rgrover1 829:9072de50087b 128 Handle_t handle;
rgrover1 829:9072de50087b 129 DisconnectionReason_t reason;
rgrover1 829:9072de50087b 130
rgrover1 829:9072de50087b 131 DisconnectionCallbackParams_t(Handle_t handleIn,
rgrover1 829:9072de50087b 132 DisconnectionReason_t reasonIn) :
rgrover1 829:9072de50087b 133 handle(handleIn),
rgrover1 829:9072de50087b 134 reason(reasonIn)
rgrover1 829:9072de50087b 135 {}
rgrover1 829:9072de50087b 136 };
rgrover1 829:9072de50087b 137
rgrover1 710:b2e1a2660ec2 138 static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
rgrover1 710:b2e1a2660ec2 139 static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
rgrover1 710:b2e1a2660ec2 140 return (durationInMillis * 1000) / UNIT_1_25_MS;
rgrover1 710:b2e1a2660ec2 141 }
rgrover1 766:03f1a26f132f 142
rgrover1 953:f6eb43f524b2 143 typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
rgrover1 953:f6eb43f524b2 144 typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
rgrover1 710:b2e1a2660ec2 145
rgrover1 954:8b33ea639a1f 146 typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
rgrover1 954:8b33ea639a1f 147 typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
rgrover1 954:8b33ea639a1f 148
rgrover1 955:9228741f4c19 149 typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
rgrover1 955:9228741f4c19 150 typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
rgrover1 955:9228741f4c19 151
rgrover1 753:0f60274cd3ad 152 typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
rgrover1 710:b2e1a2660ec2 153
rgrover1 710:b2e1a2660ec2 154 /*
rgrover1 710:b2e1a2660ec2 155 * The following functions are meant to be overridden in the platform-specific sub-class.
rgrover1 710:b2e1a2660ec2 156 */
rgrover1 710:b2e1a2660ec2 157 public:
rgrover1 710:b2e1a2660ec2 158 /**
rgrover1 710:b2e1a2660ec2 159 * Set the BTLE MAC address and type. Please note that the address format is
rgrover1 937:4932e700daf2 160 * least significant byte first (LSB). Please refer to Address_t.
rgrover1 710:b2e1a2660ec2 161 *
rgrover1 710:b2e1a2660ec2 162 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 163 */
rgrover1 710:b2e1a2660ec2 164 virtual ble_error_t setAddress(AddressType_t type, const Address_t address) {
rgrover1 734:4872b70437ce 165 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 166 (void)type;
rgrover1 734:4872b70437ce 167 (void)address;
rgrover1 734:4872b70437ce 168
rgrover1 728:997ba5e7b3b6 169 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 170 }
rgrover1 710:b2e1a2660ec2 171
rgrover1 710:b2e1a2660ec2 172 /**
rgrover1 710:b2e1a2660ec2 173 * Fetch the BTLE MAC address and type.
rgrover1 710:b2e1a2660ec2 174 *
rgrover1 710:b2e1a2660ec2 175 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 176 */
rgrover1 710:b2e1a2660ec2 177 virtual ble_error_t getAddress(AddressType_t *typeP, Address_t address) {
rgrover1 937:4932e700daf2 178 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 179 (void)typeP;
rgrover1 734:4872b70437ce 180 (void)address;
rgrover1 734:4872b70437ce 181
rgrover1 728:997ba5e7b3b6 182 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 183 }
rgrover1 710:b2e1a2660ec2 184
rgrover1 710:b2e1a2660ec2 185 /**
rgrover1 710:b2e1a2660ec2 186 * @return Minimum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 187 */
rgrover1 710:b2e1a2660ec2 188 virtual uint16_t getMinAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 189 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 190 }
rgrover1 710:b2e1a2660ec2 191
rgrover1 710:b2e1a2660ec2 192 /**
rgrover1 710:b2e1a2660ec2 193 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1 710:b2e1a2660ec2 194 */
rgrover1 710:b2e1a2660ec2 195 virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 196 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 197 }
rgrover1 710:b2e1a2660ec2 198
rgrover1 710:b2e1a2660ec2 199 /**
rgrover1 710:b2e1a2660ec2 200 * @return Maximum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 201 */
rgrover1 710:b2e1a2660ec2 202 virtual uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 203 return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 204 }
rgrover1 710:b2e1a2660ec2 205
rgrover1 710:b2e1a2660ec2 206 virtual ble_error_t stopAdvertising(void) {
rgrover1 728:997ba5e7b3b6 207 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 208 }
rgrover1 710:b2e1a2660ec2 209
rgrover1 710:b2e1a2660ec2 210 /**
rgrover1 710:b2e1a2660ec2 211 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 710:b2e1a2660ec2 212 *
rgrover1 710:b2e1a2660ec2 213 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 710:b2e1a2660ec2 214 */
rgrover1 710:b2e1a2660ec2 215 virtual ble_error_t stopScan() {
rgrover1 728:997ba5e7b3b6 216 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 217 }
rgrover1 710:b2e1a2660ec2 218
rgrover1 710:b2e1a2660ec2 219 /**
rgrover1 710:b2e1a2660ec2 220 * Create a connection (GAP Link Establishment).
rgrover1 710:b2e1a2660ec2 221 *
rgrover1 710:b2e1a2660ec2 222 * @param peerAddr
rgrover1 710:b2e1a2660ec2 223 * 48-bit address, LSB format.
rgrover1 710:b2e1a2660ec2 224 * @param peerAddrType
rgrover1 710:b2e1a2660ec2 225 * Address type of the peer.
rgrover1 710:b2e1a2660ec2 226 * @param connectionParams
rgrover1 710:b2e1a2660ec2 227 * Connection parameters.
rgrover1 710:b2e1a2660ec2 228 * @param scanParams
rgrover1 710:b2e1a2660ec2 229 * Paramters to be used while scanning for the peer.
rgrover1 710:b2e1a2660ec2 230 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 829:9072de50087b 231 * successfully. The connectionCallChain (if set) will be invoked upon
rgrover1 710:b2e1a2660ec2 232 * a connection event.
rgrover1 710:b2e1a2660ec2 233 */
rgrover1 710:b2e1a2660ec2 234 virtual ble_error_t connect(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 235 Gap::AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 236 const ConnectionParams_t *connectionParams,
rgrover1 710:b2e1a2660ec2 237 const GapScanningParams *scanParams) {
rgrover1 937:4932e700daf2 238 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 239 (void)peerAddr;
rgrover1 734:4872b70437ce 240 (void)peerAddrType;
rgrover1 734:4872b70437ce 241 (void)connectionParams;
rgrover1 734:4872b70437ce 242 (void)scanParams;
rgrover1 734:4872b70437ce 243
rgrover1 728:997ba5e7b3b6 244 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 245 }
rgrover1 710:b2e1a2660ec2 246
rgrover1 710:b2e1a2660ec2 247 /**
rgrover1 710:b2e1a2660ec2 248 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 249 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 250 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 251 *
rgrover1 710:b2e1a2660ec2 252 * @param reason
rgrover1 937:4932e700daf2 253 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 254 */
rgrover1 710:b2e1a2660ec2 255 virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
rgrover1 734:4872b70437ce 256 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 257 (void)connectionHandle;
rgrover1 734:4872b70437ce 258 (void)reason;
rgrover1 734:4872b70437ce 259
rgrover1 728:997ba5e7b3b6 260 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 261 }
rgrover1 710:b2e1a2660ec2 262
rgrover1 710:b2e1a2660ec2 263 /**
rgrover1 710:b2e1a2660ec2 264 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 265 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 266 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 267 *
rgrover1 710:b2e1a2660ec2 268 * @param reason
rgrover1 937:4932e700daf2 269 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 270 *
rgrover1 937:4932e700daf2 271 * @note: This version of disconnect() doesn't take a connection handle. It
rgrover1 937:4932e700daf2 272 * works reliably only for stacks that are limited to a single
rgrover1 710:b2e1a2660ec2 273 * connection. This API should be considered *deprecated* in favour of the
rgrover1 937:4932e700daf2 274 * alternative, which takes a connection handle. It will be dropped in the future.
rgrover1 710:b2e1a2660ec2 275 */
rgrover1 710:b2e1a2660ec2 276 virtual ble_error_t disconnect(DisconnectionReason_t reason) {
rgrover1 937:4932e700daf2 277 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 278 (void)reason;
rgrover1 734:4872b70437ce 279
rgrover1 728:997ba5e7b3b6 280 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 281 }
rgrover1 710:b2e1a2660ec2 282
rgrover1 710:b2e1a2660ec2 283 /**
rgrover1 710:b2e1a2660ec2 284 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 285 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 286 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 287 *
rgrover1 710:b2e1a2660ec2 288 * @param[out] params
rgrover1 710:b2e1a2660ec2 289 * The structure where the parameters will be stored. Memory
rgrover1 710:b2e1a2660ec2 290 * for this is owned by the caller.
rgrover1 710:b2e1a2660ec2 291 *
rgrover1 710:b2e1a2660ec2 292 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 710:b2e1a2660ec2 293 * the given structure pointed to by params.
rgrover1 710:b2e1a2660ec2 294 */
rgrover1 710:b2e1a2660ec2 295 virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
rgrover1 937:4932e700daf2 296 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 297 (void)params;
rgrover1 734:4872b70437ce 298
rgrover1 728:997ba5e7b3b6 299 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 300 }
rgrover1 710:b2e1a2660ec2 301
rgrover1 710:b2e1a2660ec2 302 /**
rgrover1 710:b2e1a2660ec2 303 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 304 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 305 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 306 *
rgrover1 710:b2e1a2660ec2 307 * @param[in] params
rgrover1 710:b2e1a2660ec2 308 * The structure containing the desired parameters.
rgrover1 710:b2e1a2660ec2 309 */
rgrover1 710:b2e1a2660ec2 310 virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
rgrover1 937:4932e700daf2 311 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 312 (void)params;
rgrover1 734:4872b70437ce 313
rgrover1 728:997ba5e7b3b6 314 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 315 }
rgrover1 710:b2e1a2660ec2 316
rgrover1 710:b2e1a2660ec2 317 /**
rgrover1 816:2b4f0ef8c06e 318 * Update connection parameters.
rgrover1 937:4932e700daf2 319 * In the central role this will initiate a Link Layer connection parameter update procedure.
rgrover1 937:4932e700daf2 320 * In the peripheral role, this will send the corresponding L2CAP request and wait for
rgrover1 816:2b4f0ef8c06e 321 * the central to perform the procedure.
rgrover1 816:2b4f0ef8c06e 322 *
rgrover1 710:b2e1a2660ec2 323 * @param[in] handle
rgrover1 937:4932e700daf2 324 * Connection Handle.
rgrover1 710:b2e1a2660ec2 325 * @param[in] params
rgrover1 710:b2e1a2660ec2 326 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 710:b2e1a2660ec2 327 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 710:b2e1a2660ec2 328 */
rgrover1 710:b2e1a2660ec2 329 virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 330 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 331 (void)handle;
rgrover1 734:4872b70437ce 332 (void)params;
rgrover1 734:4872b70437ce 333
rgrover1 728:997ba5e7b3b6 334 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 335 }
rgrover1 710:b2e1a2660ec2 336
rgrover1 710:b2e1a2660ec2 337 /**
rgrover1 710:b2e1a2660ec2 338 * Set the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 339 * @param[in] deviceName
rgrover1 710:b2e1a2660ec2 340 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 710:b2e1a2660ec2 341 */
rgrover1 710:b2e1a2660ec2 342 virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1 937:4932e700daf2 343 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 344 (void)deviceName;
rgrover1 734:4872b70437ce 345
rgrover1 728:997ba5e7b3b6 346 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 347 }
rgrover1 710:b2e1a2660ec2 348
rgrover1 710:b2e1a2660ec2 349 /**
rgrover1 710:b2e1a2660ec2 350 * Get the value of the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 351 * @param[out] deviceName
rgrover1 710:b2e1a2660ec2 352 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 710:b2e1a2660ec2 353 * terminated* string will be placed. Set this
rgrover1 710:b2e1a2660ec2 354 * value to NULL in order to obtain the deviceName-length
rgrover1 710:b2e1a2660ec2 355 * from the 'length' parameter.
rgrover1 710:b2e1a2660ec2 356 *
rgrover1 710:b2e1a2660ec2 357 * @param[in/out] lengthP
rgrover1 710:b2e1a2660ec2 358 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 710:b2e1a2660ec2 359 * (on output) the complete device name length (without the
rgrover1 710:b2e1a2660ec2 360 * null terminator).
rgrover1 710:b2e1a2660ec2 361 *
rgrover1 710:b2e1a2660ec2 362 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 710:b2e1a2660ec2 363 * length will return the complete device name length, and not the
rgrover1 710:b2e1a2660ec2 364 * number of bytes actually returned in deviceName. The application may
rgrover1 710:b2e1a2660ec2 365 * use this information to retry with a suitable buffer size.
rgrover1 710:b2e1a2660ec2 366 */
rgrover1 710:b2e1a2660ec2 367 virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 734:4872b70437ce 368 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 369 (void)deviceName;
rgrover1 734:4872b70437ce 370 (void)lengthP;
rgrover1 734:4872b70437ce 371
rgrover1 728:997ba5e7b3b6 372 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 373 }
rgrover1 710:b2e1a2660ec2 374
rgrover1 710:b2e1a2660ec2 375 /**
rgrover1 710:b2e1a2660ec2 376 * Set the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 377 * @param[in] appearance
rgrover1 710:b2e1a2660ec2 378 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 379 */
rgrover1 710:b2e1a2660ec2 380 virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1 937:4932e700daf2 381 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 382 (void)appearance;
rgrover1 734:4872b70437ce 383
rgrover1 728:997ba5e7b3b6 384 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 385 }
rgrover1 710:b2e1a2660ec2 386
rgrover1 710:b2e1a2660ec2 387 /**
rgrover1 710:b2e1a2660ec2 388 * Get the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 389 * @param[out] appearance
rgrover1 710:b2e1a2660ec2 390 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 391 */
rgrover1 710:b2e1a2660ec2 392 virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1 937:4932e700daf2 393 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 394 (void)appearanceP;
rgrover1 734:4872b70437ce 395
rgrover1 728:997ba5e7b3b6 396 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 397 }
rgrover1 710:b2e1a2660ec2 398
rgrover1 710:b2e1a2660ec2 399 /**
rgrover1 710:b2e1a2660ec2 400 * Set the radio's transmit power.
rgrover1 710:b2e1a2660ec2 401 * @param[in] txPower Radio transmit power in dBm.
rgrover1 710:b2e1a2660ec2 402 */
rgrover1 710:b2e1a2660ec2 403 virtual ble_error_t setTxPower(int8_t txPower) {
rgrover1 937:4932e700daf2 404 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 405 (void)txPower;
rgrover1 734:4872b70437ce 406
rgrover1 728:997ba5e7b3b6 407 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 408 }
rgrover1 710:b2e1a2660ec2 409
rgrover1 710:b2e1a2660ec2 410 /**
rgrover1 710:b2e1a2660ec2 411 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 710:b2e1a2660ec2 412 *
rgrover1 710:b2e1a2660ec2 413 * @param[out] valueArrayPP
rgrover1 710:b2e1a2660ec2 414 * Out parameter to receive the immutable array of Tx values.
rgrover1 710:b2e1a2660ec2 415 * @param[out] countP
rgrover1 710:b2e1a2660ec2 416 * Out parameter to receive the array's size.
rgrover1 710:b2e1a2660ec2 417 */
rgrover1 710:b2e1a2660ec2 418 virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
rgrover1 937:4932e700daf2 419 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 420 (void)valueArrayPP;
rgrover1 734:4872b70437ce 421 (void)countP;
rgrover1 734:4872b70437ce 422
rgrover1 742:861ed7eb186d 423 *countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 424 }
rgrover1 710:b2e1a2660ec2 425
rgrover1 710:b2e1a2660ec2 426 protected:
rgrover1 710:b2e1a2660ec2 427 /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
rgrover1 710:b2e1a2660ec2 428 virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
rgrover1 772:b6d27ab66c94 429 (void)scanningParams;
rgrover1 728:997ba5e7b3b6 430 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 431 }
rgrover1 710:b2e1a2660ec2 432
rgrover1 710:b2e1a2660ec2 433 /*
rgrover1 710:b2e1a2660ec2 434 * APIs with non-virtual implementations.
rgrover1 710:b2e1a2660ec2 435 */
rgrover1 710:b2e1a2660ec2 436 public:
rgrover1 710:b2e1a2660ec2 437 /**
rgrover1 937:4932e700daf2 438 * Returns the current GAP state of the device using a bitmask that
rgrover1 937:4932e700daf2 439 * describes whether the device is advertising or connected.
rgrover1 710:b2e1a2660ec2 440 */
rgrover1 710:b2e1a2660ec2 441 GapState_t getState(void) const {
rgrover1 710:b2e1a2660ec2 442 return state;
rgrover1 710:b2e1a2660ec2 443 }
rgrover1 710:b2e1a2660ec2 444
rgrover1 710:b2e1a2660ec2 445 /**
rgrover1 710:b2e1a2660ec2 446 * Set the GAP advertising mode to use for this device.
rgrover1 710:b2e1a2660ec2 447 */
rgrover1 710:b2e1a2660ec2 448 void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
rgrover1 710:b2e1a2660ec2 449 _advParams.setAdvertisingType(advType);
rgrover1 710:b2e1a2660ec2 450 }
rgrover1 710:b2e1a2660ec2 451
rgrover1 710:b2e1a2660ec2 452 /**
rgrover1 710:b2e1a2660ec2 453 * @param[in] interval
rgrover1 710:b2e1a2660ec2 454 * Advertising interval in units of milliseconds. Advertising
rgrover1 710:b2e1a2660ec2 455 * is disabled if interval is 0. If interval is smaller than
rgrover1 710:b2e1a2660ec2 456 * the minimum supported value, then the minimum supported
rgrover1 710:b2e1a2660ec2 457 * value is used instead. This minimum value can be discovered
rgrover1 710:b2e1a2660ec2 458 * using getMinAdvertisingInterval().
rgrover1 710:b2e1a2660ec2 459 *
rgrover1 710:b2e1a2660ec2 460 * This field must be set to 0 if connectionMode is equal
rgrover1 710:b2e1a2660ec2 461 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 710:b2e1a2660ec2 462 *
rgrover1 710:b2e1a2660ec2 463 * @note: Decreasing this value will allow central devices to detect a
rgrover1 937:4932e700daf2 464 * peripheral faster, at the expense of more power being used by the radio
rgrover1 710:b2e1a2660ec2 465 * due to the higher data transmit rate.
rgrover1 710:b2e1a2660ec2 466 *
rgrover1 710:b2e1a2660ec2 467 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 710:b2e1a2660ec2 468 * You should use the parallel API from Gap directly. A former call to
rgrover1 710:b2e1a2660ec2 469 * ble.setAdvertisingInterval(...) should now be achieved using
rgrover1 710:b2e1a2660ec2 470 * ble.gap().setAdvertisingInterval(...).
rgrover1 710:b2e1a2660ec2 471 *
rgrover1 710:b2e1a2660ec2 472 * @Note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 710:b2e1a2660ec2 473 * 'interval' argument. That required an explicit conversion from
rgrover1 710:b2e1a2660ec2 474 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 710:b2e1a2660ec2 475 * no longer required as the new units are milliseconds. Any application
rgrover1 937:4932e700daf2 476 * code depending on the old semantics needs to be updated accordingly.
rgrover1 710:b2e1a2660ec2 477 */
rgrover1 710:b2e1a2660ec2 478 void setAdvertisingInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 479 if (interval == 0) {
rgrover1 710:b2e1a2660ec2 480 stopAdvertising();
rgrover1 710:b2e1a2660ec2 481 } else if (interval < getMinAdvertisingInterval()) {
rgrover1 710:b2e1a2660ec2 482 interval = getMinAdvertisingInterval();
rgrover1 710:b2e1a2660ec2 483 }
rgrover1 786:d6d7087d8377 484 _advParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 485 }
rgrover1 710:b2e1a2660ec2 486
rgrover1 710:b2e1a2660ec2 487 /**
rgrover1 710:b2e1a2660ec2 488 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 489 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 710:b2e1a2660ec2 490 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 710:b2e1a2660ec2 491 */
rgrover1 710:b2e1a2660ec2 492 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 710:b2e1a2660ec2 493 _advParams.setTimeout(timeout);
rgrover1 710:b2e1a2660ec2 494 }
rgrover1 710:b2e1a2660ec2 495
rgrover1 710:b2e1a2660ec2 496 /**
rgrover1 710:b2e1a2660ec2 497 * Start advertising.
rgrover1 710:b2e1a2660ec2 498 */
rgrover1 710:b2e1a2660ec2 499 ble_error_t startAdvertising(void) {
rgrover1 937:4932e700daf2 500 setAdvertisingData(); /* Update the underlying stack. */
rgrover1 710:b2e1a2660ec2 501 return startAdvertising(_advParams);
rgrover1 710:b2e1a2660ec2 502 }
rgrover1 710:b2e1a2660ec2 503
rgrover1 710:b2e1a2660ec2 504 /**
rgrover1 710:b2e1a2660ec2 505 * Reset any advertising payload prepared from prior calls to
rgrover1 710:b2e1a2660ec2 506 * accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1 937:4932e700daf2 507 * initialized advertising payload to the underlying stack.
rgrover1 710:b2e1a2660ec2 508 */
rgrover1 710:b2e1a2660ec2 509 void clearAdvertisingPayload(void) {
rgrover1 710:b2e1a2660ec2 510 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 511 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 512 }
rgrover1 710:b2e1a2660ec2 513
rgrover1 710:b2e1a2660ec2 514 /**
rgrover1 710:b2e1a2660ec2 515 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 516 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 937:4932e700daf2 517 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 518 * small.
rgrover1 710:b2e1a2660ec2 519 *
rgrover1 710:b2e1a2660ec2 520 * @param[in] flags
rgrover1 710:b2e1a2660ec2 521 * The flags to be added. Please refer to
rgrover1 710:b2e1a2660ec2 522 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 710:b2e1a2660ec2 523 * flags may be specified in combination.
rgrover1 710:b2e1a2660ec2 524 */
rgrover1 710:b2e1a2660ec2 525 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 710:b2e1a2660ec2 526 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 527 if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 528 return rc;
rgrover1 710:b2e1a2660ec2 529 }
rgrover1 710:b2e1a2660ec2 530
rgrover1 710:b2e1a2660ec2 531 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 532 }
rgrover1 710:b2e1a2660ec2 533
rgrover1 710:b2e1a2660ec2 534 /**
rgrover1 710:b2e1a2660ec2 535 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 536 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 937:4932e700daf2 537 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 538 * small.
rgrover1 710:b2e1a2660ec2 539 *
rgrover1 710:b2e1a2660ec2 540 * @param app
rgrover1 710:b2e1a2660ec2 541 * The appearance of the peripheral.
rgrover1 710:b2e1a2660ec2 542 */
rgrover1 710:b2e1a2660ec2 543 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 710:b2e1a2660ec2 544 setAppearance(app);
rgrover1 710:b2e1a2660ec2 545
rgrover1 710:b2e1a2660ec2 546 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 547 if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 548 return rc;
rgrover1 710:b2e1a2660ec2 549 }
rgrover1 710:b2e1a2660ec2 550
rgrover1 710:b2e1a2660ec2 551 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 552 }
rgrover1 710:b2e1a2660ec2 553
rgrover1 710:b2e1a2660ec2 554 /**
rgrover1 710:b2e1a2660ec2 555 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 556 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 937:4932e700daf2 557 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 558 * small.
rgrover1 710:b2e1a2660ec2 559 *
rgrover1 937:4932e700daf2 560 * @param power
rgrover1 764:1e560f0d45e1 561 * The max transmit power to be used by the controller (in dBm).
rgrover1 710:b2e1a2660ec2 562 */
rgrover1 710:b2e1a2660ec2 563 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 710:b2e1a2660ec2 564 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 565 if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 566 return rc;
rgrover1 710:b2e1a2660ec2 567 }
rgrover1 710:b2e1a2660ec2 568
rgrover1 710:b2e1a2660ec2 569 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 570 }
rgrover1 710:b2e1a2660ec2 571
rgrover1 710:b2e1a2660ec2 572 /**
rgrover1 710:b2e1a2660ec2 573 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 574 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 710:b2e1a2660ec2 575 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1 937:4932e700daf2 576 * advertising payload is too small.
rgrover1 710:b2e1a2660ec2 577 *
rgrover1 937:4932e700daf2 578 * @param type The type describing the variable length data.
rgrover1 937:4932e700daf2 579 * @param data Data bytes.
rgrover1 937:4932e700daf2 580 * @param len Length of data.
rgrover1 710:b2e1a2660ec2 581 */
rgrover1 710:b2e1a2660ec2 582 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 583 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 710:b2e1a2660ec2 584 setDeviceName(data);
rgrover1 710:b2e1a2660ec2 585 }
rgrover1 710:b2e1a2660ec2 586
rgrover1 710:b2e1a2660ec2 587 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 588 if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 589 return rc;
rgrover1 710:b2e1a2660ec2 590 }
rgrover1 710:b2e1a2660ec2 591
rgrover1 710:b2e1a2660ec2 592 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 593 }
rgrover1 710:b2e1a2660ec2 594
rgrover1 710:b2e1a2660ec2 595 /**
rgrover1 765:4cd91998cd48 596 * Update a particular ADV field in the advertising payload (based on
rgrover1 765:4cd91998cd48 597 * matching type and length). Note: the length of the new data must be the
rgrover1 765:4cd91998cd48 598 * same as the old one.
rgrover1 763:36c3e2b1f1ae 599 *
rgrover1 937:4932e700daf2 600 * @param[in] type The ADV type field describing the variable length data.
rgrover1 937:4932e700daf2 601 * @param[in] data Data bytes.
rgrover1 937:4932e700daf2 602 * @param[in] len Length of data.
rgrover1 765:4cd91998cd48 603 *
rgrover1 765:4cd91998cd48 604 * @note: If advertisements are enabled, then the update will take effect immediately.
rgrover1 765:4cd91998cd48 605 *
rgrover1 765:4cd91998cd48 606 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
rgrover1 937:4932e700daf2 607 * a <type, len> match; otherwise, an appropriate error.
rgrover1 763:36c3e2b1f1ae 608 */
rgrover1 763:36c3e2b1f1ae 609 ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 763:36c3e2b1f1ae 610 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 763:36c3e2b1f1ae 611 setDeviceName(data);
rgrover1 763:36c3e2b1f1ae 612 }
rgrover1 763:36c3e2b1f1ae 613
rgrover1 763:36c3e2b1f1ae 614 ble_error_t rc;
rgrover1 763:36c3e2b1f1ae 615 if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 763:36c3e2b1f1ae 616 return rc;
rgrover1 763:36c3e2b1f1ae 617 }
rgrover1 763:36c3e2b1f1ae 618
rgrover1 763:36c3e2b1f1ae 619 return setAdvertisingData();
rgrover1 763:36c3e2b1f1ae 620 }
rgrover1 763:36c3e2b1f1ae 621
rgrover1 763:36c3e2b1f1ae 622 /**
rgrover1 937:4932e700daf2 623 * Set up a particular, user-constructed advertisement payload for the
rgrover1 710:b2e1a2660ec2 624 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 710:b2e1a2660ec2 625 * there are other APIs to build an advertisement payload (see above).
rgrover1 710:b2e1a2660ec2 626 */
rgrover1 710:b2e1a2660ec2 627 ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
rgrover1 710:b2e1a2660ec2 628 _advPayload = payload;
rgrover1 710:b2e1a2660ec2 629 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 630 }
rgrover1 710:b2e1a2660ec2 631
rgrover1 710:b2e1a2660ec2 632 /**
rgrover1 710:b2e1a2660ec2 633 * @return Read back advertising data. Useful for storing and
rgrover1 710:b2e1a2660ec2 634 * restoring payload.
rgrover1 710:b2e1a2660ec2 635 */
rgrover1 710:b2e1a2660ec2 636 const GapAdvertisingData &getAdvertisingPayload(void) const {
rgrover1 710:b2e1a2660ec2 637 return _advPayload;
rgrover1 710:b2e1a2660ec2 638 }
rgrover1 710:b2e1a2660ec2 639
rgrover1 710:b2e1a2660ec2 640 /**
rgrover1 710:b2e1a2660ec2 641 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 642 * scanResponse payload.
rgrover1 710:b2e1a2660ec2 643 *
rgrover1 937:4932e700daf2 644 * @param[in] type The type describing the variable length data.
rgrover1 937:4932e700daf2 645 * @param[in] data Data bytes.
rgrover1 937:4932e700daf2 646 * @param[in] len Length of data.
rgrover1 710:b2e1a2660ec2 647 */
rgrover1 710:b2e1a2660ec2 648 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 649 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 650 if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 651 return rc;
rgrover1 710:b2e1a2660ec2 652 }
rgrover1 710:b2e1a2660ec2 653
rgrover1 710:b2e1a2660ec2 654 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 655 }
rgrover1 710:b2e1a2660ec2 656
rgrover1 710:b2e1a2660ec2 657 /**
rgrover1 710:b2e1a2660ec2 658 * Reset any scan response prepared from prior calls to
rgrover1 710:b2e1a2660ec2 659 * accumulateScanResponse().
rgrover1 710:b2e1a2660ec2 660 *
rgrover1 710:b2e1a2660ec2 661 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 662 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 663 */
rgrover1 710:b2e1a2660ec2 664 void clearScanResponse(void) {
rgrover1 710:b2e1a2660ec2 665 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 666 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 667 }
rgrover1 710:b2e1a2660ec2 668
rgrover1 710:b2e1a2660ec2 669 /**
rgrover1 937:4932e700daf2 670 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 671 * @param[in] interval
rgrover1 710:b2e1a2660ec2 672 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 673 * @param[in] window
rgrover1 710:b2e1a2660ec2 674 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 675 * @param[in] timeout
rgrover1 937:4932e700daf2 676 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 677 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 678 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 679 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 680 *
rgrover1 710:b2e1a2660ec2 681 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 682 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 683 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 684 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 685 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 686 * interval.
rgrover1 710:b2e1a2660ec2 687 *
rgrover1 710:b2e1a2660ec2 688 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 689 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 690 *
rgrover1 710:b2e1a2660ec2 691 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 710:b2e1a2660ec2 692 */
rgrover1 710:b2e1a2660ec2 693 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 710:b2e1a2660ec2 694 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 710:b2e1a2660ec2 695 uint16_t timeout = 0,
rgrover1 710:b2e1a2660ec2 696 bool activeScanning = false) {
rgrover1 710:b2e1a2660ec2 697 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 698 if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 699 ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 700 ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
rgrover1 710:b2e1a2660ec2 701 _scanningParams.setActiveScanning(activeScanning);
rgrover1 710:b2e1a2660ec2 702 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 703 }
rgrover1 710:b2e1a2660ec2 704
rgrover1 710:b2e1a2660ec2 705 return rc;
rgrover1 710:b2e1a2660ec2 706 }
rgrover1 710:b2e1a2660ec2 707
rgrover1 710:b2e1a2660ec2 708 /**
rgrover1 937:4932e700daf2 709 * Set up the scanInterval parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 710 * @param[in] interval
rgrover1 710:b2e1a2660ec2 711 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 712 *
rgrover1 710:b2e1a2660ec2 713 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 714 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 715 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 716 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 717 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 718 * interval.
rgrover1 710:b2e1a2660ec2 719 *
rgrover1 710:b2e1a2660ec2 720 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 721 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 722 */
rgrover1 710:b2e1a2660ec2 723 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 724 return _scanningParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 725 }
rgrover1 710:b2e1a2660ec2 726
rgrover1 710:b2e1a2660ec2 727 /**
rgrover1 937:4932e700daf2 728 * Set up the scanWindow parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 729 * @param[in] window
rgrover1 710:b2e1a2660ec2 730 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 731 *
rgrover1 710:b2e1a2660ec2 732 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 733 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 734 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 735 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 736 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 737 * interval.
rgrover1 710:b2e1a2660ec2 738 *
rgrover1 710:b2e1a2660ec2 739 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 740 * enabled by using startScan().
rgrover1 770:079b714e9c1a 741 *
rgrover1 770:079b714e9c1a 742 * If scanning is already active, the updated value of scanWindow will be
rgrover1 770:079b714e9c1a 743 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 744 */
rgrover1 710:b2e1a2660ec2 745 ble_error_t setScanWindow(uint16_t window) {
rgrover1 770:079b714e9c1a 746 ble_error_t rc;
rgrover1 770:079b714e9c1a 747 if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 748 return rc;
rgrover1 770:079b714e9c1a 749 }
rgrover1 770:079b714e9c1a 750
rgrover1 770:079b714e9c1a 751 /* If scanning is already active, propagate the new setting to the stack. */
rgrover1 770:079b714e9c1a 752 if (scanningActive) {
rgrover1 770:079b714e9c1a 753 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 754 }
rgrover1 770:079b714e9c1a 755
rgrover1 770:079b714e9c1a 756 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 757 }
rgrover1 710:b2e1a2660ec2 758
rgrover1 710:b2e1a2660ec2 759 /**
rgrover1 937:4932e700daf2 760 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 761 * @param[in] timeout
rgrover1 937:4932e700daf2 762 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 763 *
rgrover1 710:b2e1a2660ec2 764 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 765 * enabled by using startScan().
rgrover1 770:079b714e9c1a 766 *
rgrover1 770:079b714e9c1a 767 * If scanning is already active, the updated value of scanTimeout will be
rgrover1 770:079b714e9c1a 768 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 769 */
rgrover1 710:b2e1a2660ec2 770 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 770:079b714e9c1a 771 ble_error_t rc;
rgrover1 770:079b714e9c1a 772 if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 773 return rc;
rgrover1 770:079b714e9c1a 774 }
rgrover1 770:079b714e9c1a 775
rgrover1 770:079b714e9c1a 776 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 777 if (scanningActive) {
rgrover1 770:079b714e9c1a 778 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 779 }
rgrover1 770:079b714e9c1a 780
rgrover1 770:079b714e9c1a 781 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 782 }
rgrover1 710:b2e1a2660ec2 783
rgrover1 710:b2e1a2660ec2 784 /**
rgrover1 937:4932e700daf2 785 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 786 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 787 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 788 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 789 *
rgrover1 710:b2e1a2660ec2 790 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 791 * enabled by using startScan().
rgrover1 770:079b714e9c1a 792 *
rgrover1 770:079b714e9c1a 793 * If scanning is already in progress, then active-scanning will be enabled
rgrover1 770:079b714e9c1a 794 * for the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 795 */
rgrover1 770:079b714e9c1a 796 ble_error_t setActiveScanning(bool activeScanning) {
rgrover1 710:b2e1a2660ec2 797 _scanningParams.setActiveScanning(activeScanning);
rgrover1 770:079b714e9c1a 798
rgrover1 770:079b714e9c1a 799 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 800 if (scanningActive) {
rgrover1 770:079b714e9c1a 801 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 802 }
rgrover1 770:079b714e9c1a 803
rgrover1 770:079b714e9c1a 804 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 805 }
rgrover1 710:b2e1a2660ec2 806
rgrover1 710:b2e1a2660ec2 807 /**
rgrover1 710:b2e1a2660ec2 808 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 710:b2e1a2660ec2 809 * effect.
rgrover1 710:b2e1a2660ec2 810 *
rgrover1 710:b2e1a2660ec2 811 * @param[in] callback
rgrover1 937:4932e700daf2 812 * The application-specific callback to be invoked upon
rgrover1 710:b2e1a2660ec2 813 * receiving every advertisement report. This can be passed in
rgrover1 710:b2e1a2660ec2 814 * as NULL, in which case scanning may not be enabled at all.
rgrover1 710:b2e1a2660ec2 815 */
rgrover1 710:b2e1a2660ec2 816 ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 817 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 818 if (callback) {
rgrover1 710:b2e1a2660ec2 819 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 820 scanningActive = true;
rgrover1 710:b2e1a2660ec2 821 onAdvertisementReport.attach(callback);
rgrover1 710:b2e1a2660ec2 822 }
rgrover1 710:b2e1a2660ec2 823 }
rgrover1 710:b2e1a2660ec2 824
rgrover1 710:b2e1a2660ec2 825 return err;
rgrover1 710:b2e1a2660ec2 826 }
rgrover1 710:b2e1a2660ec2 827
rgrover1 710:b2e1a2660ec2 828 /**
rgrover1 710:b2e1a2660ec2 829 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 710:b2e1a2660ec2 830 */
rgrover1 710:b2e1a2660ec2 831 template<typename T>
rgrover1 710:b2e1a2660ec2 832 ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 833 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 834 if (object && callbackMember) {
rgrover1 710:b2e1a2660ec2 835 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 836 scanningActive = true;
rgrover1 710:b2e1a2660ec2 837 onAdvertisementReport.attach(object, callbackMember);
rgrover1 710:b2e1a2660ec2 838 }
rgrover1 710:b2e1a2660ec2 839 }
rgrover1 710:b2e1a2660ec2 840
rgrover1 710:b2e1a2660ec2 841 return err;
rgrover1 710:b2e1a2660ec2 842 }
rgrover1 710:b2e1a2660ec2 843
rgrover1 753:0f60274cd3ad 844 /**
rgrover1 753:0f60274cd3ad 845 * Initialize radio-notification events to be generated from the stack.
rgrover1 937:4932e700daf2 846 * This API doesn't need to be called directly.
rgrover1 753:0f60274cd3ad 847 *
rgrover1 753:0f60274cd3ad 848 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 753:0f60274cd3ad 849 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 850 * radio is in use.
rgrover1 753:0f60274cd3ad 851 *
rgrover1 937:4932e700daf2 852 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
rgrover1 937:4932e700daf2 853 * signal is sent at the end of the radio event. These signals can be used
rgrover1 753:0f60274cd3ad 854 * by the application programmer to synchronize application logic with radio
rgrover1 753:0f60274cd3ad 855 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 937:4932e700daf2 856 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 753:0f60274cd3ad 857 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 753:0f60274cd3ad 858 *
rgrover1 753:0f60274cd3ad 859 * @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
rgrover1 753:0f60274cd3ad 860 */
rgrover1 753:0f60274cd3ad 861 virtual ble_error_t initRadioNotification(void) {
rgrover1 753:0f60274cd3ad 862 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 753:0f60274cd3ad 863 }
rgrover1 753:0f60274cd3ad 864
rgrover1 710:b2e1a2660ec2 865 private:
rgrover1 710:b2e1a2660ec2 866 ble_error_t setAdvertisingData(void) {
rgrover1 710:b2e1a2660ec2 867 return setAdvertisingData(_advPayload, _scanResponse);
rgrover1 710:b2e1a2660ec2 868 }
rgrover1 710:b2e1a2660ec2 869
rgrover1 710:b2e1a2660ec2 870 private:
rgrover1 896:791741895cd8 871 virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
rgrover1 896:791741895cd8 872 virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
rgrover1 710:b2e1a2660ec2 873
rgrover1 710:b2e1a2660ec2 874 public:
rgrover1 710:b2e1a2660ec2 875 /**
rgrover1 710:b2e1a2660ec2 876 * Accessors to read back currently active advertising params.
rgrover1 710:b2e1a2660ec2 877 */
rgrover1 710:b2e1a2660ec2 878 GapAdvertisingParams &getAdvertisingParams(void) {
rgrover1 710:b2e1a2660ec2 879 return _advParams;
rgrover1 710:b2e1a2660ec2 880 }
rgrover1 710:b2e1a2660ec2 881 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 710:b2e1a2660ec2 882 return _advParams;
rgrover1 710:b2e1a2660ec2 883 }
rgrover1 710:b2e1a2660ec2 884
rgrover1 710:b2e1a2660ec2 885 /**
rgrover1 937:4932e700daf2 886 * Set up a particular, user-constructed set of advertisement parameters for
rgrover1 710:b2e1a2660ec2 887 * the underlying stack. It would be uncommon for this API to be used
rgrover1 710:b2e1a2660ec2 888 * directly; there are other APIs to tweak advertisement parameters
rgrover1 710:b2e1a2660ec2 889 * individually.
rgrover1 710:b2e1a2660ec2 890 */
rgrover1 710:b2e1a2660ec2 891 void setAdvertisingParams(const GapAdvertisingParams &newParams) {
rgrover1 710:b2e1a2660ec2 892 _advParams = newParams;
rgrover1 710:b2e1a2660ec2 893 }
rgrover1 710:b2e1a2660ec2 894
rgrover1 710:b2e1a2660ec2 895 /* Event callback handlers. */
rgrover1 710:b2e1a2660ec2 896 public:
rgrover1 710:b2e1a2660ec2 897 /**
rgrover1 937:4932e700daf2 898 * Set up a callback for timeout events. Refer to TimeoutSource_t for
rgrover1 710:b2e1a2660ec2 899 * possible event types.
rgrover1 710:b2e1a2660ec2 900 */
rgrover1 953:f6eb43f524b2 901 void onTimeout(TimeoutEventCallback_t callback) {
rgrover1 953:f6eb43f524b2 902 timeoutCallbackChain.add(callback);
rgrover1 953:f6eb43f524b2 903 }
rgrover1 953:f6eb43f524b2 904
rgrover1 953:f6eb43f524b2 905 TimeoutEventCallbackChain_t& onTimeout() {
rgrover1 953:f6eb43f524b2 906 return timeoutCallbackChain;
rgrover1 953:f6eb43f524b2 907 }
rgrover1 710:b2e1a2660ec2 908
rgrover1 710:b2e1a2660ec2 909 /**
rgrover1 829:9072de50087b 910 * Append to a chain of callbacks to be invoked upon GAP connection.
rgrover1 710:b2e1a2660ec2 911 */
rgrover1 829:9072de50087b 912 void onConnection(ConnectionEventCallback_t callback) {connectionCallChain.add(callback);}
rgrover1 710:b2e1a2660ec2 913
rgrover1 829:9072de50087b 914 template<typename T>
rgrover1 829:9072de50087b 915 void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {connectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 916
rgrover1 954:8b33ea639a1f 917 ConnectionEventCallbackChain_t& onconnection() {
rgrover1 954:8b33ea639a1f 918 return connectionCallChain;
rgrover1 954:8b33ea639a1f 919 }
rgrover1 954:8b33ea639a1f 920
rgrover1 710:b2e1a2660ec2 921 /**
rgrover1 829:9072de50087b 922 * Append to a chain of callbacks to be invoked upon GAP disconnection.
rgrover1 816:2b4f0ef8c06e 923 */
rgrover1 829:9072de50087b 924 void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallChain.add(callback);}
rgrover1 816:2b4f0ef8c06e 925
rgrover1 710:b2e1a2660ec2 926 template<typename T>
rgrover1 829:9072de50087b 927 void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {disconnectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 928
rgrover1 955:9228741f4c19 929 DisconnectionEventCallbackChain_t& onDisconnection() {
rgrover1 955:9228741f4c19 930 return disconnectionCallChain;
rgrover1 955:9228741f4c19 931 }
rgrover1 955:9228741f4c19 932
rgrover1 710:b2e1a2660ec2 933 /**
rgrover1 710:b2e1a2660ec2 934 * Set the application callback for radio-notification events.
rgrover1 710:b2e1a2660ec2 935 *
rgrover1 710:b2e1a2660ec2 936 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 710:b2e1a2660ec2 937 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 938 * radio is in use.
rgrover1 710:b2e1a2660ec2 939 *
rgrover1 937:4932e700daf2 940 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
rgrover1 937:4932e700daf2 941 * signal is sent at the end of the radio event. These signals can be used
rgrover1 710:b2e1a2660ec2 942 * by the application programmer to synchronize application logic with radio
rgrover1 710:b2e1a2660ec2 943 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 937:4932e700daf2 944 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 710:b2e1a2660ec2 945 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 710:b2e1a2660ec2 946 *
rgrover1 710:b2e1a2660ec2 947 * @param callback
rgrover1 710:b2e1a2660ec2 948 * The application handler to be invoked in response to a radio
rgrover1 710:b2e1a2660ec2 949 * ACTIVE/INACTIVE event.
rgrover1 754:9b391fb5c5d7 950 *
rgrover1 937:4932e700daf2 951 * Or in the other version:
rgrover1 754:9b391fb5c5d7 952 *
rgrover1 754:9b391fb5c5d7 953 * @param tptr
rgrover1 754:9b391fb5c5d7 954 * Pointer to the object of a class defining the member callback
rgrover1 754:9b391fb5c5d7 955 * function (mptr).
rgrover1 754:9b391fb5c5d7 956 * @param mptr
rgrover1 754:9b391fb5c5d7 957 * The member callback (within the context of an object) to be
rgrover1 754:9b391fb5c5d7 958 * invoked in response to a radio ACTIVE/INACTIVE event.
rgrover1 710:b2e1a2660ec2 959 */
rgrover1 753:0f60274cd3ad 960 void onRadioNotification(void (*callback)(bool param)) {
rgrover1 753:0f60274cd3ad 961 radioNotificationCallback.attach(callback);
rgrover1 949:1902cbd0dd83 962 initRadioNotification();
rgrover1 753:0f60274cd3ad 963 }
rgrover1 753:0f60274cd3ad 964 template <typename T>
rgrover1 753:0f60274cd3ad 965 void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
rgrover1 753:0f60274cd3ad 966 radioNotificationCallback.attach(tptr, mptr);
rgrover1 949:1902cbd0dd83 967 initRadioNotification();
rgrover1 753:0f60274cd3ad 968 }
rgrover1 710:b2e1a2660ec2 969
rgrover1 710:b2e1a2660ec2 970 protected:
rgrover1 710:b2e1a2660ec2 971 Gap() :
rgrover1 710:b2e1a2660ec2 972 _advParams(),
rgrover1 710:b2e1a2660ec2 973 _advPayload(),
rgrover1 710:b2e1a2660ec2 974 _scanningParams(),
rgrover1 710:b2e1a2660ec2 975 _scanResponse(),
rgrover1 710:b2e1a2660ec2 976 state(),
rgrover1 770:079b714e9c1a 977 scanningActive(false),
rgrover1 953:f6eb43f524b2 978 timeoutCallbackChain(),
rgrover1 710:b2e1a2660ec2 979 radioNotificationCallback(),
rgrover1 710:b2e1a2660ec2 980 onAdvertisementReport(),
rgrover1 816:2b4f0ef8c06e 981 connectionCallChain(),
rgrover1 710:b2e1a2660ec2 982 disconnectionCallChain() {
rgrover1 710:b2e1a2660ec2 983 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 984 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 985 }
rgrover1 710:b2e1a2660ec2 986
rgrover1 710:b2e1a2660ec2 987 /* Entry points for the underlying stack to report events back to the user. */
rgrover1 710:b2e1a2660ec2 988 public:
rgrover1 710:b2e1a2660ec2 989 void processConnectionEvent(Handle_t handle,
rgrover1 710:b2e1a2660ec2 990 Role_t role,
rgrover1 710:b2e1a2660ec2 991 AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 992 const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 993 AddressType_t ownAddrType,
rgrover1 710:b2e1a2660ec2 994 const Address_t ownAddr,
rgrover1 710:b2e1a2660ec2 995 const ConnectionParams_t *connectionParams) {
rgrover1 710:b2e1a2660ec2 996 state.connected = 1;
rgrover1 829:9072de50087b 997 ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
rgrover1 829:9072de50087b 998 connectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 999 }
rgrover1 710:b2e1a2660ec2 1000
rgrover1 710:b2e1a2660ec2 1001 void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
rgrover1 710:b2e1a2660ec2 1002 state.connected = 0;
rgrover1 829:9072de50087b 1003 DisconnectionCallbackParams_t callbackParams(handle, reason);
rgrover1 829:9072de50087b 1004 disconnectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 1005 }
rgrover1 710:b2e1a2660ec2 1006
rgrover1 710:b2e1a2660ec2 1007 void processAdvertisementReport(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 1008 int8_t rssi,
rgrover1 710:b2e1a2660ec2 1009 bool isScanResponse,
rgrover1 710:b2e1a2660ec2 1010 GapAdvertisingParams::AdvertisingType_t type,
rgrover1 710:b2e1a2660ec2 1011 uint8_t advertisingDataLen,
rgrover1 710:b2e1a2660ec2 1012 const uint8_t *advertisingData) {
rgrover1 710:b2e1a2660ec2 1013 AdvertisementCallbackParams_t params;
rgrover1 710:b2e1a2660ec2 1014 memcpy(params.peerAddr, peerAddr, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 1015 params.rssi = rssi;
rgrover1 710:b2e1a2660ec2 1016 params.isScanResponse = isScanResponse;
rgrover1 710:b2e1a2660ec2 1017 params.type = type;
rgrover1 710:b2e1a2660ec2 1018 params.advertisingDataLen = advertisingDataLen;
rgrover1 710:b2e1a2660ec2 1019 params.advertisingData = advertisingData;
rgrover1 710:b2e1a2660ec2 1020 onAdvertisementReport.call(&params);
rgrover1 710:b2e1a2660ec2 1021 }
rgrover1 710:b2e1a2660ec2 1022
rgrover1 710:b2e1a2660ec2 1023 void processTimeoutEvent(TimeoutSource_t source) {
rgrover1 953:f6eb43f524b2 1024 if (timeoutCallbackChain) {
rgrover1 953:f6eb43f524b2 1025 timeoutCallbackChain(source);
rgrover1 710:b2e1a2660ec2 1026 }
rgrover1 710:b2e1a2660ec2 1027 }
rgrover1 710:b2e1a2660ec2 1028
rgrover1 710:b2e1a2660ec2 1029 protected:
rgrover1 710:b2e1a2660ec2 1030 GapAdvertisingParams _advParams;
rgrover1 710:b2e1a2660ec2 1031 GapAdvertisingData _advPayload;
rgrover1 710:b2e1a2660ec2 1032 GapScanningParams _scanningParams;
rgrover1 710:b2e1a2660ec2 1033 GapAdvertisingData _scanResponse;
rgrover1 710:b2e1a2660ec2 1034
rgrover1 710:b2e1a2660ec2 1035 GapState_t state;
rgrover1 770:079b714e9c1a 1036 bool scanningActive;
rgrover1 710:b2e1a2660ec2 1037
rgrover1 710:b2e1a2660ec2 1038 protected:
rgrover1 953:f6eb43f524b2 1039 TimeoutEventCallbackChain_t timeoutCallbackChain;
rgrover1 949:1902cbd0dd83 1040 RadioNotificationEventCallback_t radioNotificationCallback;
rgrover1 949:1902cbd0dd83 1041 AdvertisementReportCallback_t onAdvertisementReport;
rgrover1 954:8b33ea639a1f 1042 ConnectionEventCallbackChain_t connectionCallChain;
rgrover1 955:9228741f4c19 1043 DisconnectionEventCallbackChain_t disconnectionCallChain;
rgrover1 710:b2e1a2660ec2 1044
rgrover1 710:b2e1a2660ec2 1045 private:
rgrover1 937:4932e700daf2 1046 /* Disallow copy and assignment. */
rgrover1 710:b2e1a2660ec2 1047 Gap(const Gap &);
rgrover1 710:b2e1a2660ec2 1048 Gap& operator=(const Gap &);
rgrover1 710:b2e1a2660ec2 1049 };
rgrover1 710:b2e1a2660ec2 1050
rgrover1 710:b2e1a2660ec2 1051 #endif // ifndef __GAP_H__