CARLO TARALLO / BLE_API

prova invio BLE

Dependents:   BLE_HeartRate_IDB04A1

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@1192:718787de23b7, 2016-04-06 (annotated)

Committer:
vcoubard
Date:
Wed Apr 06 19:15:46 2016 +0100
Revision:
1192:718787de23b7
Parent:
1191:c8635748feec
Child:
1193:c8bbf3a6712d
Synchronized with git rev d279f7aa

Author: Andres Amaya Garcia

Change onShutdown(obj, func) definition



Change onShutdown(obj, func) definition for func so that it takes the same

arguments as function-only callbacks rather than void.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
vcoubard 1131:692ddf04fc42 1 /* mbed Microcontroller Library
vcoubard 1131:692ddf04fc42 2 * Copyright (c) 2006-2013 ARM Limited
vcoubard 1131:692ddf04fc42 3 *
vcoubard 1131:692ddf04fc42 4 * Licensed under the Apache License, Version 2.0 (the "License");
vcoubard 1131:692ddf04fc42 5 * you may not use this file except in compliance with the License.
vcoubard 1131:692ddf04fc42 6 * You may obtain a copy of the License at
vcoubard 1131:692ddf04fc42 7 *
vcoubard 1131:692ddf04fc42 8 * http://www.apache.org/licenses/LICENSE-2.0
vcoubard 1131:692ddf04fc42 9 *
vcoubard 1131:692ddf04fc42 10 * Unless required by applicable law or agreed to in writing, software
vcoubard 1131:692ddf04fc42 11 * distributed under the License is distributed on an "AS IS" BASIS,
vcoubard 1131:692ddf04fc42 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
vcoubard 1131:692ddf04fc42 13 * See the License for the specific language governing permissions and
vcoubard 1131:692ddf04fc42 14 * limitations under the License.
vcoubard 1131:692ddf04fc42 15 */
vcoubard 1131:692ddf04fc42 16
vcoubard 1131:692ddf04fc42 17 #ifndef __GAP_H__
vcoubard 1131:692ddf04fc42 18 #define __GAP_H__
vcoubard 1131:692ddf04fc42 19
vcoubard 1135:22aada733dbd 20 #include "ble/BLEProtocol.h"
vcoubard 1131:692ddf04fc42 21 #include "GapAdvertisingData.h"
vcoubard 1131:692ddf04fc42 22 #include "GapAdvertisingParams.h"
vcoubard 1131:692ddf04fc42 23 #include "GapScanningParams.h"
vcoubard 1131:692ddf04fc42 24 #include "GapEvents.h"
vcoubard 1131:692ddf04fc42 25 #include "CallChainOfFunctionPointersWithContext.h"
vcoubard 1131:692ddf04fc42 26 #include "FunctionPointerWithContext.h"
vcoubard 1135:22aada733dbd 27 #include "deprecate.h"
vcoubard 1131:692ddf04fc42 28
vcoubard 1131:692ddf04fc42 29 /* Forward declarations for classes that will only be used for pointers or references in the following. */
vcoubard 1131:692ddf04fc42 30 class GapAdvertisingParams;
vcoubard 1131:692ddf04fc42 31 class GapScanningParams;
vcoubard 1131:692ddf04fc42 32 class GapAdvertisingData;
vcoubard 1131:692ddf04fc42 33
vcoubard 1131:692ddf04fc42 34 class Gap {
vcoubard 1135:22aada733dbd 35 /*
vcoubard 1135:22aada733dbd 36 * DEPRECATION ALERT: all of the APIs in this `public` block are deprecated.
vcoubard 1135:22aada733dbd 37 * They have been relocated to the class BLEProtocol.
vcoubard 1135:22aada733dbd 38 */
vcoubard 1131:692ddf04fc42 39 public:
vcoubard 1135:22aada733dbd 40 /**
vcoubard 1135:22aada733dbd 41 * Address-type for BLEProtocol addresses.
vcoubard 1135:22aada733dbd 42 *
vcoubard 1183:1589830dbdb7 43 * @deprecated Use BLEProtocol::AddressType_t instead.
vcoubard 1135:22aada733dbd 44 */
vcoubard 1135:22aada733dbd 45 typedef BLEProtocol::AddressType_t AddressType_t;
vcoubard 1135:22aada733dbd 46
vcoubard 1135:22aada733dbd 47 /**
vcoubard 1135:22aada733dbd 48 * Address-type for BLEProtocol addresses.
vcoubard 1183:1589830dbdb7 49 *
vcoubard 1183:1589830dbdb7 50 * @deprecated Use BLEProtocol::AddressType_t instead.
vcoubard 1135:22aada733dbd 51 */
vcoubard 1135:22aada733dbd 52 typedef BLEProtocol::AddressType_t addr_type_t;
vcoubard 1135:22aada733dbd 53
vcoubard 1135:22aada733dbd 54 /**
vcoubard 1135:22aada733dbd 55 * Address-type for BLEProtocol addresses.
vcoubard 1135:22aada733dbd 56 *
vcoubard 1183:1589830dbdb7 57 * @deprecated Use BLEProtocol::AddressType_t instead. The following
vcoubard 1183:1589830dbdb7 58 * constants have been left in their deprecated state to
vcoubard 1183:1589830dbdb7 59 * transparenly support existing applications which may have
vcoubard 1183:1589830dbdb7 60 * used Gap::ADDR_TYPE_*.
vcoubard 1135:22aada733dbd 61 */
vcoubard 1135:22aada733dbd 62 enum DeprecatedAddressType_t {
vcoubard 1135:22aada733dbd 63 ADDR_TYPE_PUBLIC = BLEProtocol::AddressType::PUBLIC,
vcoubard 1135:22aada733dbd 64 ADDR_TYPE_RANDOM_STATIC = BLEProtocol::AddressType::RANDOM_STATIC,
vcoubard 1135:22aada733dbd 65 ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_RESOLVABLE,
vcoubard 1135:22aada733dbd 66 ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_NON_RESOLVABLE
vcoubard 1131:692ddf04fc42 67 };
vcoubard 1131:692ddf04fc42 68
vcoubard 1183:1589830dbdb7 69 /**
vcoubard 1183:1589830dbdb7 70 * Length (in octets) of the BLE MAC address.
vcoubard 1183:1589830dbdb7 71 */
vcoubard 1183:1589830dbdb7 72 static const unsigned ADDR_LEN = BLEProtocol::ADDR_LEN;
vcoubard 1183:1589830dbdb7 73 /**
vcoubard 1183:1589830dbdb7 74 * 48-bit address, LSB format.
vcoubard 1183:1589830dbdb7 75 *
vcoubard 1183:1589830dbdb7 76 * @deprecated Use BLEProtocol::AddressBytes_t instead.
vcoubard 1183:1589830dbdb7 77 */
vcoubard 1183:1589830dbdb7 78 typedef BLEProtocol::AddressBytes_t Address_t;
vcoubard 1183:1589830dbdb7 79 /**
vcoubard 1183:1589830dbdb7 80 * 48-bit address, LSB format.
vcoubard 1183:1589830dbdb7 81 *
vcoubard 1183:1589830dbdb7 82 * @deprecated Use BLEProtocol::AddressBytes_t instead.
vcoubard 1183:1589830dbdb7 83 */
vcoubard 1183:1589830dbdb7 84 typedef BLEProtocol::AddressBytes_t address_t;
vcoubard 1131:692ddf04fc42 85
vcoubard 1135:22aada733dbd 86 public:
vcoubard 1183:1589830dbdb7 87 /**
vcoubard 1183:1589830dbdb7 88 * Enumeration for timeout sources.
vcoubard 1183:1589830dbdb7 89 */
vcoubard 1131:692ddf04fc42 90 enum TimeoutSource_t {
vcoubard 1131:692ddf04fc42 91 TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
vcoubard 1131:692ddf04fc42 92 TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
vcoubard 1131:692ddf04fc42 93 TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
vcoubard 1131:692ddf04fc42 94 TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
vcoubard 1131:692ddf04fc42 95 };
vcoubard 1131:692ddf04fc42 96
vcoubard 1131:692ddf04fc42 97 /**
vcoubard 1131:692ddf04fc42 98 * Enumeration for disconnection reasons. The values for these reasons are
vcoubard 1131:692ddf04fc42 99 * derived from Nordic's implementation, but the reasons are meant to be
vcoubard 1131:692ddf04fc42 100 * independent of the transport. If you are returned a reason that is not
vcoubard 1131:692ddf04fc42 101 * covered by this enumeration, please refer to the underlying
vcoubard 1131:692ddf04fc42 102 * transport library.
vcoubard 1131:692ddf04fc42 103 */
vcoubard 1131:692ddf04fc42 104 enum DisconnectionReason_t {
vcoubard 1131:692ddf04fc42 105 CONNECTION_TIMEOUT = 0x08,
vcoubard 1131:692ddf04fc42 106 REMOTE_USER_TERMINATED_CONNECTION = 0x13,
vcoubard 1131:692ddf04fc42 107 REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote device terminated connection due to low resources.*/
vcoubard 1131:692ddf04fc42 108 REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote device terminated connection due to power off. */
vcoubard 1131:692ddf04fc42 109 LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
vcoubard 1131:692ddf04fc42 110 CONN_INTERVAL_UNACCEPTABLE = 0x3B,
vcoubard 1131:692ddf04fc42 111 };
vcoubard 1131:692ddf04fc42 112
vcoubard 1135:22aada733dbd 113 /**
vcoubard 1135:22aada733dbd 114 * Enumeration for whitelist advertising policy filter modes. The possible
vcoubard 1135:22aada733dbd 115 * filter modes were obtained from the Bluetooth Core Specification
vcoubard 1135:22aada733dbd 116 * 4.2 (Vol. 6), Part B, Section 4.3.2.
vcoubard 1135:22aada733dbd 117 *
vcoubard 1135:22aada733dbd 118 * @experimental
vcoubard 1135:22aada733dbd 119 */
vcoubard 1135:22aada733dbd 120 enum AdvertisingPolicyMode_t {
vcoubard 1135:22aada733dbd 121 ADV_POLICY_IGNORE_WHITELIST = 0,
vcoubard 1135:22aada733dbd 122 ADV_POLICY_FILTER_SCAN_REQS = 1,
vcoubard 1135:22aada733dbd 123 ADV_POLICY_FILTER_CONN_REQS = 2,
vcoubard 1135:22aada733dbd 124 ADV_POLICY_FILTER_ALL_REQS = 3,
vcoubard 1135:22aada733dbd 125 };
vcoubard 1135:22aada733dbd 126
vcoubard 1135:22aada733dbd 127 /**
vcoubard 1135:22aada733dbd 128 * Enumeration for whitelist scanning policy filter modes. The possible
vcoubard 1135:22aada733dbd 129 * filter modes were obtained from the Bluetooth Core Specification
vcoubard 1135:22aada733dbd 130 * 4.2 (Vol. 6), Part B, Section 4.3.3.
vcoubard 1135:22aada733dbd 131 *
vcoubard 1135:22aada733dbd 132 * @experimental
vcoubard 1135:22aada733dbd 133 */
vcoubard 1135:22aada733dbd 134 enum ScanningPolicyMode_t {
vcoubard 1135:22aada733dbd 135 SCAN_POLICY_IGNORE_WHITELIST = 0,
vcoubard 1135:22aada733dbd 136 SCAN_POLICY_FILTER_ALL_ADV = 1,
vcoubard 1135:22aada733dbd 137 };
vcoubard 1135:22aada733dbd 138
vcoubard 1135:22aada733dbd 139 /**
vcoubard 1135:22aada733dbd 140 * Enumeration for the whitelist initiator policy fiter modes. The possible
vcoubard 1135:22aada733dbd 141 * filter modes were obtained from the Bluetooth Core Specification
vcoubard 1135:22aada733dbd 142 * 4.2 (vol. 6), Part B, Section 4.4.4.
vcoubard 1135:22aada733dbd 143 *
vcoubard 1135:22aada733dbd 144 * @experimental
vcoubard 1135:22aada733dbd 145 */
vcoubard 1135:22aada733dbd 146 enum InitiatorPolicyMode_t {
vcoubard 1135:22aada733dbd 147 INIT_POLICY_IGNORE_WHITELIST = 0,
vcoubard 1135:22aada733dbd 148 INIT_POLICY_FILTER_ALL_ADV = 1,
vcoubard 1135:22aada733dbd 149 };
vcoubard 1135:22aada733dbd 150
vcoubard 1135:22aada733dbd 151 /**
vcoubard 1135:22aada733dbd 152 * Representation of a Bluetooth Low Enery Whitelist containing addresses.
vcoubard 1135:22aada733dbd 153 *
vcoubard 1135:22aada733dbd 154 * @experimental
vcoubard 1135:22aada733dbd 155 */
vcoubard 1135:22aada733dbd 156 struct Whitelist_t {
vcoubard 1183:1589830dbdb7 157 BLEProtocol::Address_t *addresses; /**< List of BLE addresses in the whitelist. */
vcoubard 1183:1589830dbdb7 158 uint8_t size; /**< Total number of BLE addresses in this whitelist */
vcoubard 1183:1589830dbdb7 159 uint8_t capacity; /**< Maximum number of BLE addresses that can be added to this whitelist. */
vcoubard 1135:22aada733dbd 160 };
vcoubard 1135:22aada733dbd 161
vcoubard 1135:22aada733dbd 162
vcoubard 1183:1589830dbdb7 163 /**
vcoubard 1183:1589830dbdb7 164 * Describes the current state of the device (more than one bit can be set).
vcoubard 1183:1589830dbdb7 165 */
vcoubard 1131:692ddf04fc42 166 struct GapState_t {
vcoubard 1131:692ddf04fc42 167 unsigned advertising : 1; /**< Peripheral is currently advertising. */
vcoubard 1131:692ddf04fc42 168 unsigned connected : 1; /**< Peripheral is connected to a central. */
vcoubard 1131:692ddf04fc42 169 };
vcoubard 1131:692ddf04fc42 170
vcoubard 1183:1589830dbdb7 171 /**
vcoubard 1183:1589830dbdb7 172 * Type for connection handle.
vcoubard 1183:1589830dbdb7 173 */
vcoubard 1183:1589830dbdb7 174 typedef uint16_t Handle_t;
vcoubard 1131:692ddf04fc42 175
vcoubard 1183:1589830dbdb7 176 /**
vcoubard 1183:1589830dbdb7 177 * Structure containing GAP connection parameters. When in peripheral role
vcoubard 1183:1589830dbdb7 178 * the connection parameters are suggestions. The choice of the connection
vcoubard 1183:1589830dbdb7 179 * parameters is eventually up to the central.
vcoubard 1183:1589830dbdb7 180 */
vcoubard 1131:692ddf04fc42 181 typedef struct {
vcoubard 1183:1589830dbdb7 182 uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see BLE_GAP_CP_LIMITS.*/
vcoubard 1183:1589830dbdb7 183 uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see BLE_GAP_CP_LIMITS.*/
vcoubard 1183:1589830dbdb7 184 uint16_t slaveLatency; /**< Slave Latency in number of connection events, see BLE_GAP_CP_LIMITS.*/
vcoubard 1183:1589830dbdb7 185 uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see BLE_GAP_CP_LIMITS.*/
vcoubard 1131:692ddf04fc42 186 } ConnectionParams_t;
vcoubard 1131:692ddf04fc42 187
vcoubard 1183:1589830dbdb7 188 /**
vcoubard 1183:1589830dbdb7 189 * Enumeration for the possible GAP roles of a BLE device.
vcoubard 1183:1589830dbdb7 190 */
vcoubard 1131:692ddf04fc42 191 enum Role_t {
vcoubard 1131:692ddf04fc42 192 PERIPHERAL = 0x1, /**< Peripheral Role. */
vcoubard 1131:692ddf04fc42 193 CENTRAL = 0x2, /**< Central Role. */
vcoubard 1131:692ddf04fc42 194 };
vcoubard 1131:692ddf04fc42 195
vcoubard 1183:1589830dbdb7 196 /**
vcoubard 1183:1589830dbdb7 197 * Structure containing data and metadata of a scanned advertising packet.
vcoubard 1183:1589830dbdb7 198 */
vcoubard 1131:692ddf04fc42 199 struct AdvertisementCallbackParams_t {
vcoubard 1183:1589830dbdb7 200 BLEProtocol::AddressBytes_t peerAddr; /**< The peer's BLE address. */
vcoubard 1183:1589830dbdb7 201 int8_t rssi; /**< The advertisement packet RSSI value. */
vcoubard 1183:1589830dbdb7 202 bool isScanResponse; /**< Whether this packet is the response to a scan request. */
vcoubard 1183:1589830dbdb7 203 GapAdvertisingParams::AdvertisingType_t type; /**< The type of advertisement. */
vcoubard 1183:1589830dbdb7 204 uint8_t advertisingDataLen; /**< Length of the advertisement data. */
vcoubard 1183:1589830dbdb7 205 const uint8_t *advertisingData; /**< Pointer to the advertisement packet's data. */
vcoubard 1131:692ddf04fc42 206 };
vcoubard 1183:1589830dbdb7 207
vcoubard 1183:1589830dbdb7 208 /**
vcoubard 1183:1589830dbdb7 209 * Type for the handlers of advertisement callback events. Refer to
vcoubard 1183:1589830dbdb7 210 * Gap::startScan().
vcoubard 1183:1589830dbdb7 211 */
vcoubard 1131:692ddf04fc42 212 typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
vcoubard 1131:692ddf04fc42 213
vcoubard 1183:1589830dbdb7 214 /**
vcoubard 1183:1589830dbdb7 215 * Encapsulates the parameters of a connection. This information is passed
vcoubard 1183:1589830dbdb7 216 * to the registered handler of connection events. Refer to Gap::onConnection().
vcoubard 1183:1589830dbdb7 217 */
vcoubard 1131:692ddf04fc42 218 struct ConnectionCallbackParams_t {
vcoubard 1183:1589830dbdb7 219 Handle_t handle; /**< The ID for this connection */
vcoubard 1183:1589830dbdb7 220 Role_t role; /**< This device's role in the connection */
vcoubard 1183:1589830dbdb7 221 BLEProtocol::AddressType_t peerAddrType; /**< The peer's BLE address type */
vcoubard 1183:1589830dbdb7 222 BLEProtocol::AddressBytes_t peerAddr; /**< The peer's BLE address */
vcoubard 1183:1589830dbdb7 223 BLEProtocol::AddressType_t ownAddrType; /**< This device's BLE address type */
vcoubard 1183:1589830dbdb7 224 BLEProtocol::AddressBytes_t ownAddr; /**< This devices's BLE address */
vcoubard 1183:1589830dbdb7 225 const ConnectionParams_t *connectionParams; /**< The currently configured connection parameters */
vcoubard 1131:692ddf04fc42 226
vcoubard 1183:1589830dbdb7 227 /**
vcoubard 1183:1589830dbdb7 228 * Constructor for ConnectionCallbackParams_t.
vcoubard 1183:1589830dbdb7 229 *
vcoubard 1183:1589830dbdb7 230 * @param[in] handleIn
vcoubard 1183:1589830dbdb7 231 * Value for ConnectionCallbackParams_t::handle
vcoubard 1183:1589830dbdb7 232 * @param[in] roleIn
vcoubard 1183:1589830dbdb7 233 * Value for ConnectionCallbackParams_t::role
vcoubard 1183:1589830dbdb7 234 * @param[in] peerAddrTypeIn
vcoubard 1183:1589830dbdb7 235 * Value for ConnectionCallbackParams_t::peerAddrType
vcoubard 1183:1589830dbdb7 236 * @param[in] peerAddrIn
vcoubard 1183:1589830dbdb7 237 * Value for ConnectionCallbackParams_t::peerAddr
vcoubard 1183:1589830dbdb7 238 * @param[in] ownAddrTypeIn
vcoubard 1183:1589830dbdb7 239 * Value for ConnectionCallbackParams_t::ownAddrType
vcoubard 1183:1589830dbdb7 240 * @param[in] ownAddrIn
vcoubard 1183:1589830dbdb7 241 * Value for ConnectionCallbackParams_t::ownAddr
vcoubard 1183:1589830dbdb7 242 * @param[in] connectionParamsIn
vcoubard 1183:1589830dbdb7 243 * Value for ConnectionCallbackParams_t::connectionParams
vcoubard 1183:1589830dbdb7 244 */
vcoubard 1135:22aada733dbd 245 ConnectionCallbackParams_t(Handle_t handleIn,
vcoubard 1135:22aada733dbd 246 Role_t roleIn,
vcoubard 1135:22aada733dbd 247 BLEProtocol::AddressType_t peerAddrTypeIn,
vcoubard 1135:22aada733dbd 248 const uint8_t *peerAddrIn,
vcoubard 1135:22aada733dbd 249 BLEProtocol::AddressType_t ownAddrTypeIn,
vcoubard 1135:22aada733dbd 250 const uint8_t *ownAddrIn,
vcoubard 1135:22aada733dbd 251 const ConnectionParams_t *connectionParamsIn) :
vcoubard 1131:692ddf04fc42 252 handle(handleIn),
vcoubard 1131:692ddf04fc42 253 role(roleIn),
vcoubard 1131:692ddf04fc42 254 peerAddrType(peerAddrTypeIn),
vcoubard 1131:692ddf04fc42 255 peerAddr(),
vcoubard 1131:692ddf04fc42 256 ownAddrType(ownAddrTypeIn),
vcoubard 1131:692ddf04fc42 257 ownAddr(),
vcoubard 1131:692ddf04fc42 258 connectionParams(connectionParamsIn) {
vcoubard 1131:692ddf04fc42 259 memcpy(peerAddr, peerAddrIn, ADDR_LEN);
vcoubard 1131:692ddf04fc42 260 memcpy(ownAddr, ownAddrIn, ADDR_LEN);
vcoubard 1131:692ddf04fc42 261 }
vcoubard 1131:692ddf04fc42 262 };
vcoubard 1131:692ddf04fc42 263
vcoubard 1183:1589830dbdb7 264 /**
vcoubard 1183:1589830dbdb7 265 * Structure that encapsulates information about a disconnection event.
vcoubard 1183:1589830dbdb7 266 * Refer to Gap::onDisconnection().
vcoubard 1183:1589830dbdb7 267 */
vcoubard 1131:692ddf04fc42 268 struct DisconnectionCallbackParams_t {
vcoubard 1183:1589830dbdb7 269 Handle_t handle; /**< The ID of the connection that caused the disconnection event */
vcoubard 1183:1589830dbdb7 270 DisconnectionReason_t reason; /**< The reason of the disconnection event */
vcoubard 1131:692ddf04fc42 271
vcoubard 1183:1589830dbdb7 272 /**
vcoubard 1183:1589830dbdb7 273 * Constructor for DisconnectionCallbackParams_t.
vcoubard 1183:1589830dbdb7 274 *
vcoubard 1183:1589830dbdb7 275 * @param[in] handleIn
vcoubard 1183:1589830dbdb7 276 * Value for DisconnectionCallbackParams_t::handle.
vcoubard 1183:1589830dbdb7 277 * @param[in] reasonIn
vcoubard 1183:1589830dbdb7 278 * Value for DisconnectionCallbackParams_t::reason.
vcoubard 1183:1589830dbdb7 279 */
vcoubard 1131:692ddf04fc42 280 DisconnectionCallbackParams_t(Handle_t handleIn,
vcoubard 1131:692ddf04fc42 281 DisconnectionReason_t reasonIn) :
vcoubard 1131:692ddf04fc42 282 handle(handleIn),
vcoubard 1131:692ddf04fc42 283 reason(reasonIn)
vcoubard 1131:692ddf04fc42 284 {}
vcoubard 1131:692ddf04fc42 285 };
vcoubard 1131:692ddf04fc42 286
vcoubard 1131:692ddf04fc42 287 static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
vcoubard 1183:1589830dbdb7 288 /**
vcoubard 1183:1589830dbdb7 289 * Helper function to convert from units of milliseconds to GAP duration
vcoubard 1183:1589830dbdb7 290 * units.
vcoubard 1183:1589830dbdb7 291 *
vcoubard 1183:1589830dbdb7 292 * @param[in] durationInMillis
vcoubard 1183:1589830dbdb7 293 * The duration in milliseconds.
vcoubard 1183:1589830dbdb7 294 *
vcoubard 1183:1589830dbdb7 295 * @return The duration in GAP duration units.
vcoubard 1183:1589830dbdb7 296 */
vcoubard 1131:692ddf04fc42 297 static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
vcoubard 1131:692ddf04fc42 298 return (durationInMillis * 1000) / UNIT_1_25_MS;
vcoubard 1131:692ddf04fc42 299 }
vcoubard 1131:692ddf04fc42 300
vcoubard 1183:1589830dbdb7 301 /**
vcoubard 1183:1589830dbdb7 302 * Type for the registered callbacks added to the timeout event callchain.
vcoubard 1183:1589830dbdb7 303 * Refer to Gap::onTimeout().
vcoubard 1183:1589830dbdb7 304 */
vcoubard 1131:692ddf04fc42 305 typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
vcoubard 1183:1589830dbdb7 306 /**
vcoubard 1183:1589830dbdb7 307 * Type for the timeout event callchain. Refer to Gap::onTimeout().
vcoubard 1183:1589830dbdb7 308 */
vcoubard 1131:692ddf04fc42 309 typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
vcoubard 1131:692ddf04fc42 310
vcoubard 1183:1589830dbdb7 311 /**
vcoubard 1183:1589830dbdb7 312 * Type for the registered callbacks added to the connection event
vcoubard 1183:1589830dbdb7 313 * callchain. Refer to Gap::onConnection().
vcoubard 1183:1589830dbdb7 314 */
vcoubard 1131:692ddf04fc42 315 typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
vcoubard 1183:1589830dbdb7 316 /**
vcoubard 1183:1589830dbdb7 317 * Type for the connection event callchain. Refer to Gap::onConnection().
vcoubard 1183:1589830dbdb7 318 */
vcoubard 1131:692ddf04fc42 319 typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
vcoubard 1131:692ddf04fc42 320
vcoubard 1183:1589830dbdb7 321 /**
vcoubard 1183:1589830dbdb7 322 * Type for the registered callbacks added to the disconnection event
vcoubard 1183:1589830dbdb7 323 * callchain. Refer to Gap::onDisconnetion().
vcoubard 1183:1589830dbdb7 324 */
vcoubard 1131:692ddf04fc42 325 typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
vcoubard 1183:1589830dbdb7 326 /**
vcoubard 1183:1589830dbdb7 327 * Type for the disconnection event callchain. Refer to Gap::onDisconnection().
vcoubard 1183:1589830dbdb7 328 */
vcoubard 1132:6362b7c2fdff 329 typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
vcoubard 1131:692ddf04fc42 330
vcoubard 1183:1589830dbdb7 331 /**
vcoubard 1183:1589830dbdb7 332 * Type for the handlers of radio notification callback events. Refer to
vcoubard 1183:1589830dbdb7 333 * Gap::onRadioNotification().
vcoubard 1183:1589830dbdb7 334 */
vcoubard 1131:692ddf04fc42 335 typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
vcoubard 1131:692ddf04fc42 336
vcoubard 1183:1589830dbdb7 337 /**
vcoubard 1183:1589830dbdb7 338 * Type for the handlers of shutdown callback events. Refer to
vcoubard 1183:1589830dbdb7 339 * Gap::onShutdown().
vcoubard 1183:1589830dbdb7 340 */
vcoubard 1135:22aada733dbd 341 typedef FunctionPointerWithContext<const Gap *> GapShutdownCallback_t;
vcoubard 1183:1589830dbdb7 342 /**
vcoubard 1183:1589830dbdb7 343 * Type for the shutdown event callchain. Refer to Gap::onShutdown().
vcoubard 1183:1589830dbdb7 344 */
vcoubard 1135:22aada733dbd 345 typedef CallChainOfFunctionPointersWithContext<const Gap *> GapShutdownCallbackChain_t;
vcoubard 1135:22aada733dbd 346
vcoubard 1131:692ddf04fc42 347 /*
vcoubard 1131:692ddf04fc42 348 * The following functions are meant to be overridden in the platform-specific sub-class.
vcoubard 1131:692ddf04fc42 349 */
vcoubard 1131:692ddf04fc42 350 public:
vcoubard 1131:692ddf04fc42 351 /**
vcoubard 1131:692ddf04fc42 352 * Set the BTLE MAC address and type. Please note that the address format is
vcoubard 1135:22aada733dbd 353 * least significant byte first (LSB). Please refer to BLEProtocol::AddressBytes_t.
vcoubard 1131:692ddf04fc42 354 *
vcoubard 1183:1589830dbdb7 355 * @param[in] type
vcoubard 1183:1589830dbdb7 356 * The type of the BLE address to set.
vcoubard 1183:1589830dbdb7 357 * @param[in] address
vcoubard 1183:1589830dbdb7 358 * The BLE address to set.
vcoubard 1183:1589830dbdb7 359 *
vcoubard 1131:692ddf04fc42 360 * @return BLE_ERROR_NONE on success.
vcoubard 1131:692ddf04fc42 361 */
vcoubard 1135:22aada733dbd 362 virtual ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
vcoubard 1131:692ddf04fc42 363 /* avoid compiler warnings about unused variables */
vcoubard 1131:692ddf04fc42 364 (void)type;
vcoubard 1131:692ddf04fc42 365 (void)address;
vcoubard 1131:692ddf04fc42 366
vcoubard 1131:692ddf04fc42 367 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 368 }
vcoubard 1131:692ddf04fc42 369
vcoubard 1131:692ddf04fc42 370 /**
vcoubard 1131:692ddf04fc42 371 * Fetch the BTLE MAC address and type.
vcoubard 1131:692ddf04fc42 372 *
vcoubard 1183:1589830dbdb7 373 * @param[out] typeP
vcoubard 1183:1589830dbdb7 374 * The current BLE address type.
vcoubard 1183:1589830dbdb7 375 * @param[out] address
vcoubard 1183:1589830dbdb7 376 * The current BLE address.
vcoubard 1183:1589830dbdb7 377 *
vcoubard 1131:692ddf04fc42 378 * @return BLE_ERROR_NONE on success.
vcoubard 1131:692ddf04fc42 379 */
vcoubard 1135:22aada733dbd 380 virtual ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
vcoubard 1131:692ddf04fc42 381 /* Avoid compiler warnings about unused variables. */
vcoubard 1131:692ddf04fc42 382 (void)typeP;
vcoubard 1131:692ddf04fc42 383 (void)address;
vcoubard 1131:692ddf04fc42 384
vcoubard 1131:692ddf04fc42 385 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 386 }
vcoubard 1131:692ddf04fc42 387
vcoubard 1131:692ddf04fc42 388 /**
vcoubard 1183:1589830dbdb7 389 * Get the minimum advertising interval in milliseconds for connectable
vcoubard 1183:1589830dbdb7 390 * undirected and connectable directed event types supported by the
vcoubard 1183:1589830dbdb7 391 * underlying BLE stack.
vcoubard 1183:1589830dbdb7 392 *
vcoubard 1134:d540a48f650d 393 * @return Minimum Advertising interval in milliseconds for connectable
vcoubard 1183:1589830dbdb7 394 * undirected and connectable directed event types.
vcoubard 1131:692ddf04fc42 395 */
vcoubard 1131:692ddf04fc42 396 virtual uint16_t getMinAdvertisingInterval(void) const {
vcoubard 1131:692ddf04fc42 397 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 398 }
vcoubard 1131:692ddf04fc42 399
vcoubard 1131:692ddf04fc42 400 /**
vcoubard 1183:1589830dbdb7 401 * Get the minimum advertising interval in milliseconds for scannable
vcoubard 1183:1589830dbdb7 402 * undirected and non-connectable undirected even types supported by the
vcoubard 1183:1589830dbdb7 403 * underlying BLE stack.
vcoubard 1183:1589830dbdb7 404 *
vcoubard 1134:d540a48f650d 405 * @return Minimum Advertising interval in milliseconds for scannable
vcoubard 1183:1589830dbdb7 406 * undirected and non-connectable undirected event types.
vcoubard 1131:692ddf04fc42 407 */
vcoubard 1131:692ddf04fc42 408 virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
vcoubard 1131:692ddf04fc42 409 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 410 }
vcoubard 1131:692ddf04fc42 411
vcoubard 1131:692ddf04fc42 412 /**
vcoubard 1183:1589830dbdb7 413 * Get the maximum advertising interval in milliseconds for all event types
vcoubard 1183:1589830dbdb7 414 * supported by the underlying BLE stack.
vcoubard 1183:1589830dbdb7 415 *
vcoubard 1131:692ddf04fc42 416 * @return Maximum Advertising interval in milliseconds.
vcoubard 1131:692ddf04fc42 417 */
vcoubard 1131:692ddf04fc42 418 virtual uint16_t getMaxAdvertisingInterval(void) const {
vcoubard 1131:692ddf04fc42 419 return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 420 }
vcoubard 1131:692ddf04fc42 421
vcoubard 1183:1589830dbdb7 422 /**
vcoubard 1183:1589830dbdb7 423 * Stop advertising. The current advertising parameters remain in effect.
vcoubard 1183:1589830dbdb7 424 *
vcoubard 1183:1589830dbdb7 425 * @retval BLE_ERROR_NONE if successfully stopped advertising procedure.
vcoubard 1183:1589830dbdb7 426 */
vcoubard 1131:692ddf04fc42 427 virtual ble_error_t stopAdvertising(void) {
vcoubard 1131:692ddf04fc42 428 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 429 }
vcoubard 1131:692ddf04fc42 430
vcoubard 1131:692ddf04fc42 431 /**
vcoubard 1131:692ddf04fc42 432 * Stop scanning. The current scanning parameters remain in effect.
vcoubard 1131:692ddf04fc42 433 *
vcoubard 1131:692ddf04fc42 434 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
vcoubard 1131:692ddf04fc42 435 */
vcoubard 1131:692ddf04fc42 436 virtual ble_error_t stopScan() {
vcoubard 1131:692ddf04fc42 437 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 438 }
vcoubard 1131:692ddf04fc42 439
vcoubard 1131:692ddf04fc42 440 /**
vcoubard 1131:692ddf04fc42 441 * Create a connection (GAP Link Establishment).
vcoubard 1131:692ddf04fc42 442 *
vcoubard 1183:1589830dbdb7 443 * @param[in] peerAddr
vcoubard 1183:1589830dbdb7 444 * 48-bit address, LSB format.
vcoubard 1183:1589830dbdb7 445 * @param[in] peerAddrType
vcoubard 1183:1589830dbdb7 446 * Address type of the peer.
vcoubard 1183:1589830dbdb7 447 * @param[in] connectionParams
vcoubard 1183:1589830dbdb7 448 * Connection parameters.
vcoubard 1183:1589830dbdb7 449 * @param[in] scanParams
vcoubard 1183:1589830dbdb7 450 * Paramters to be used while scanning for the peer.
vcoubard 1183:1589830dbdb7 451 *
vcoubard 1131:692ddf04fc42 452 * @return BLE_ERROR_NONE if connection establishment procedure is started
vcoubard 1183:1589830dbdb7 453 * successfully. The connectionCallChain (if set) will be invoked upon
vcoubard 1183:1589830dbdb7 454 * a connection event.
vcoubard 1131:692ddf04fc42 455 */
vcoubard 1135:22aada733dbd 456 virtual ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard 1135:22aada733dbd 457 BLEProtocol::AddressType_t peerAddrType,
vcoubard 1135:22aada733dbd 458 const ConnectionParams_t *connectionParams,
vcoubard 1135:22aada733dbd 459 const GapScanningParams *scanParams) {
vcoubard 1131:692ddf04fc42 460 /* Avoid compiler warnings about unused variables. */
vcoubard 1131:692ddf04fc42 461 (void)peerAddr;
vcoubard 1131:692ddf04fc42 462 (void)peerAddrType;
vcoubard 1131:692ddf04fc42 463 (void)connectionParams;
vcoubard 1131:692ddf04fc42 464 (void)scanParams;
vcoubard 1131:692ddf04fc42 465
vcoubard 1131:692ddf04fc42 466 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 467 }
vcoubard 1131:692ddf04fc42 468
vcoubard 1131:692ddf04fc42 469 /**
vcoubard 1135:22aada733dbd 470 * Create a connection (GAP Link Establishment).
vcoubard 1135:22aada733dbd 471 *
vcoubard 1183:1589830dbdb7 472 * @deprecated This funtion overloads Gap::connect(const BLEProtocol::Address_t peerAddr,
vcoubard 1183:1589830dbdb7 473 * BLEProtocol::AddressType_t peerAddrType,
vcoubard 1183:1589830dbdb7 474 * const ConnectionParams_t *connectionParams,
vcoubard 1183:1589830dbdb7 475 * const GapScanningParams *scanParams)
vcoubard 1183:1589830dbdb7 476 * to maintain backward compatibility for change from Gap::AddressType_t to
vcoubard 1183:1589830dbdb7 477 * BLEProtocol::AddressType_t.
vcoubard 1135:22aada733dbd 478 */
vcoubard 1135:22aada733dbd 479 ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard 1135:22aada733dbd 480 DeprecatedAddressType_t peerAddrType,
vcoubard 1135:22aada733dbd 481 const ConnectionParams_t *connectionParams,
vcoubard 1135:22aada733dbd 482 const GapScanningParams *scanParams)
vcoubard 1135:22aada733dbd 483 __deprecated_message("Gap::DeprecatedAddressType_t is deprecated, use BLEProtocol::AddressType_t instead") {
vcoubard 1135:22aada733dbd 484 return connect(peerAddr, (BLEProtocol::AddressType_t) peerAddrType, connectionParams, scanParams);
vcoubard 1135:22aada733dbd 485 }
vcoubard 1135:22aada733dbd 486
vcoubard 1135:22aada733dbd 487 /**
vcoubard 1131:692ddf04fc42 488 * This call initiates the disconnection procedure, and its completion will
vcoubard 1131:692ddf04fc42 489 * be communicated to the application with an invocation of the
vcoubard 1131:692ddf04fc42 490 * disconnectionCallback.
vcoubard 1131:692ddf04fc42 491 *
vcoubard 1183:1589830dbdb7 492 * @param[in] reason
vcoubard 1183:1589830dbdb7 493 * The reason for disconnection; to be sent back to the peer.
vcoubard 1183:1589830dbdb7 494 * @param[in] connectionHandle
vcoubard 1183:1589830dbdb7 495 * The handle of the connection to disconnect from.
vcoubard 1183:1589830dbdb7 496 *
vcoubard 1183:1589830dbdb7 497 * @return BLE_ERROR_NONE if disconnection was successful.
vcoubard 1131:692ddf04fc42 498 */
vcoubard 1131:692ddf04fc42 499 virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
vcoubard 1131:692ddf04fc42 500 /* avoid compiler warnings about unused variables */
vcoubard 1131:692ddf04fc42 501 (void)connectionHandle;
vcoubard 1131:692ddf04fc42 502 (void)reason;
vcoubard 1131:692ddf04fc42 503
vcoubard 1131:692ddf04fc42 504 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 505 }
vcoubard 1131:692ddf04fc42 506
vcoubard 1131:692ddf04fc42 507 /**
vcoubard 1131:692ddf04fc42 508 * This call initiates the disconnection procedure, and its completion will
vcoubard 1131:692ddf04fc42 509 * be communicated to the application with an invocation of the
vcoubard 1131:692ddf04fc42 510 * disconnectionCallback.
vcoubard 1131:692ddf04fc42 511 *
vcoubard 1183:1589830dbdb7 512 * @param[in] reason
vcoubard 1183:1589830dbdb7 513 * The reason for disconnection; to be sent back to the peer.
vcoubard 1183:1589830dbdb7 514 *
vcoubard 1183:1589830dbdb7 515 * @return BLE_ERROR_NONE if disconnection was successful.
vcoubard 1131:692ddf04fc42 516 *
vcoubard 1183:1589830dbdb7 517 * @deprecated This version of disconnect() doesn't take a connection handle. It
vcoubard 1183:1589830dbdb7 518 * works reliably only for stacks that are limited to a single
vcoubard 1183:1589830dbdb7 519 * connection. Use instead Gap::disconnect(Handle_t connectionHandle,
vcoubard 1183:1589830dbdb7 520 * DisconnectionReason_t reason) instead.
vcoubard 1131:692ddf04fc42 521 */
vcoubard 1131:692ddf04fc42 522 virtual ble_error_t disconnect(DisconnectionReason_t reason) {
vcoubard 1131:692ddf04fc42 523 /* Avoid compiler warnings about unused variables. */
vcoubard 1131:692ddf04fc42 524 (void)reason;
vcoubard 1131:692ddf04fc42 525
vcoubard 1131:692ddf04fc42 526 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 527 }
vcoubard 1131:692ddf04fc42 528
vcoubard 1131:692ddf04fc42 529 /**
vcoubard 1131:692ddf04fc42 530 * Get the GAP peripheral preferred connection parameters. These are the
vcoubard 1131:692ddf04fc42 531 * defaults that the peripheral would like to have in a connection. The
vcoubard 1131:692ddf04fc42 532 * choice of the connection parameters is eventually up to the central.
vcoubard 1131:692ddf04fc42 533 *
vcoubard 1131:692ddf04fc42 534 * @param[out] params
vcoubard 1131:692ddf04fc42 535 * The structure where the parameters will be stored. Memory
vcoubard 1131:692ddf04fc42 536 * for this is owned by the caller.
vcoubard 1131:692ddf04fc42 537 *
vcoubard 1131:692ddf04fc42 538 * @return BLE_ERROR_NONE if the parameters were successfully filled into
vcoubard 1183:1589830dbdb7 539 * the given structure pointed to by params.
vcoubard 1131:692ddf04fc42 540 */
vcoubard 1131:692ddf04fc42 541 virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
vcoubard 1131:692ddf04fc42 542 /* Avoid compiler warnings about unused variables. */
vcoubard 1131:692ddf04fc42 543 (void)params;
vcoubard 1131:692ddf04fc42 544
vcoubard 1131:692ddf04fc42 545 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 546 }
vcoubard 1131:692ddf04fc42 547
vcoubard 1131:692ddf04fc42 548 /**
vcoubard 1131:692ddf04fc42 549 * Set the GAP peripheral preferred connection parameters. These are the
vcoubard 1131:692ddf04fc42 550 * defaults that the peripheral would like to have in a connection. The
vcoubard 1131:692ddf04fc42 551 * choice of the connection parameters is eventually up to the central.
vcoubard 1131:692ddf04fc42 552 *
vcoubard 1131:692ddf04fc42 553 * @param[in] params
vcoubard 1131:692ddf04fc42 554 * The structure containing the desired parameters.
vcoubard 1183:1589830dbdb7 555 *
vcoubard 1183:1589830dbdb7 556 * @return BLE_ERROR_NONE if the preferred connection params were set
vcoubard 1183:1589830dbdb7 557 * correctly.
vcoubard 1131:692ddf04fc42 558 */
vcoubard 1131:692ddf04fc42 559 virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
vcoubard 1131:692ddf04fc42 560 /* Avoid compiler warnings about unused variables. */
vcoubard 1131:692ddf04fc42 561 (void)params;
vcoubard 1131:692ddf04fc42 562
vcoubard 1131:692ddf04fc42 563 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 564 }
vcoubard 1131:692ddf04fc42 565
vcoubard 1131:692ddf04fc42 566 /**
vcoubard 1183:1589830dbdb7 567 * Update connection parameters. In the central role this will initiate a
vcoubard 1183:1589830dbdb7 568 * Link Layer connection parameter update procedure. In the peripheral role,
vcoubard 1183:1589830dbdb7 569 * this will send the corresponding L2CAP request and wait for the central
vcoubard 1183:1589830dbdb7 570 * to perform the procedure.
vcoubard 1131:692ddf04fc42 571 *
vcoubard 1131:692ddf04fc42 572 * @param[in] handle
vcoubard 1131:692ddf04fc42 573 * Connection Handle.
vcoubard 1131:692ddf04fc42 574 * @param[in] params
vcoubard 1131:692ddf04fc42 575 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
vcoubard 1131:692ddf04fc42 576 * the parameters in the PPCP characteristic of the GAP service will be used instead.
vcoubard 1183:1589830dbdb7 577 *
vcoubard 1183:1589830dbdb7 578 * @return BLE_ERROR_NONE if the connection parameters were updated correctly.
vcoubard 1131:692ddf04fc42 579 */
vcoubard 1131:692ddf04fc42 580 virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
vcoubard 1131:692ddf04fc42 581 /* avoid compiler warnings about unused variables */
vcoubard 1131:692ddf04fc42 582 (void)handle;
vcoubard 1131:692ddf04fc42 583 (void)params;
vcoubard 1131:692ddf04fc42 584
vcoubard 1131:692ddf04fc42 585 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 586 }
vcoubard 1131:692ddf04fc42 587
vcoubard 1131:692ddf04fc42 588 /**
vcoubard 1131:692ddf04fc42 589 * Set the device name characteristic in the GAP service.
vcoubard 1183:1589830dbdb7 590 *
vcoubard 1131:692ddf04fc42 591 * @param[in] deviceName
vcoubard 1131:692ddf04fc42 592 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
vcoubard 1183:1589830dbdb7 593 *
vcoubard 1183:1589830dbdb7 594 * @return BLE_ERROR_NONE if the device name was set correctly.
vcoubard 1131:692ddf04fc42 595 */
vcoubard 1131:692ddf04fc42 596 virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard 1131:692ddf04fc42 597 /* Avoid compiler warnings about unused variables. */
vcoubard 1131:692ddf04fc42 598 (void)deviceName;
vcoubard 1131:692ddf04fc42 599
vcoubard 1131:692ddf04fc42 600 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 601 }
vcoubard 1131:692ddf04fc42 602
vcoubard 1131:692ddf04fc42 603 /**
vcoubard 1131:692ddf04fc42 604 * Get the value of the device name characteristic in the GAP service.
vcoubard 1183:1589830dbdb7 605 *
vcoubard 1131:692ddf04fc42 606 * @param[out] deviceName
vcoubard 1131:692ddf04fc42 607 * Pointer to an empty buffer where the UTF-8 *non NULL-
vcoubard 1131:692ddf04fc42 608 * terminated* string will be placed. Set this
vcoubard 1131:692ddf04fc42 609 * value to NULL in order to obtain the deviceName-length
vcoubard 1131:692ddf04fc42 610 * from the 'length' parameter.
vcoubard 1131:692ddf04fc42 611 *
vcoubard 1183:1589830dbdb7 612 * @param[in,out] lengthP
vcoubard 1131:692ddf04fc42 613 * (on input) Length of the buffer pointed to by deviceName;
vcoubard 1131:692ddf04fc42 614 * (on output) the complete device name length (without the
vcoubard 1131:692ddf04fc42 615 * null terminator).
vcoubard 1131:692ddf04fc42 616 *
vcoubard 1183:1589830dbdb7 617 * @return BLE_ERROR_NONE if the device name was fetched correctly from the
vcoubard 1183:1589830dbdb7 618 * underlying BLE stack.
vcoubard 1183:1589830dbdb7 619 *
vcoubard 1131:692ddf04fc42 620 * @note If the device name is longer than the size of the supplied buffer,
vcoubard 1183:1589830dbdb7 621 * length will return the complete device name length, and not the
vcoubard 1183:1589830dbdb7 622 * number of bytes actually returned in deviceName. The application may
vcoubard 1183:1589830dbdb7 623 * use this information to retry with a suitable buffer size.
vcoubard 1131:692ddf04fc42 624 */
vcoubard 1131:692ddf04fc42 625 virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
vcoubard 1131:692ddf04fc42 626 /* avoid compiler warnings about unused variables */
vcoubard 1131:692ddf04fc42 627 (void)deviceName;
vcoubard 1131:692ddf04fc42 628 (void)lengthP;
vcoubard 1131:692ddf04fc42 629
vcoubard 1131:692ddf04fc42 630 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 631 }
vcoubard 1131:692ddf04fc42 632
vcoubard 1131:692ddf04fc42 633 /**
vcoubard 1131:692ddf04fc42 634 * Set the appearance characteristic in the GAP service.
vcoubard 1183:1589830dbdb7 635 *
vcoubard 1131:692ddf04fc42 636 * @param[in] appearance
vcoubard 1131:692ddf04fc42 637 * The new value for the device-appearance.
vcoubard 1183:1589830dbdb7 638 *
vcoubard 1183:1589830dbdb7 639 * @return BLE_ERROR_NONE if the new appearance was set correctly.
vcoubard 1131:692ddf04fc42 640 */
vcoubard 1131:692ddf04fc42 641 virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard 1131:692ddf04fc42 642 /* Avoid compiler warnings about unused variables. */
vcoubard 1131:692ddf04fc42 643 (void)appearance;
vcoubard 1131:692ddf04fc42 644
vcoubard 1131:692ddf04fc42 645 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 646 }
vcoubard 1131:692ddf04fc42 647
vcoubard 1131:692ddf04fc42 648 /**
vcoubard 1131:692ddf04fc42 649 * Get the appearance characteristic in the GAP service.
vcoubard 1183:1589830dbdb7 650 *
vcoubard 1131:692ddf04fc42 651 * @param[out] appearance
vcoubard 1183:1589830dbdb7 652 * The current device-appearance value.
vcoubard 1183:1589830dbdb7 653 *
vcoubard 1183:1589830dbdb7 654 * @return BLE_ERROR_NONE if the device-appearance was fetched correctly
vcoubard 1183:1589830dbdb7 655 * from the underlying BLE stack.
vcoubard 1131:692ddf04fc42 656 */
vcoubard 1131:692ddf04fc42 657 virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard 1131:692ddf04fc42 658 /* Avoid compiler warnings about unused variables. */
vcoubard 1131:692ddf04fc42 659 (void)appearanceP;
vcoubard 1131:692ddf04fc42 660
vcoubard 1131:692ddf04fc42 661 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 662 }
vcoubard 1131:692ddf04fc42 663
vcoubard 1131:692ddf04fc42 664 /**
vcoubard 1131:692ddf04fc42 665 * Set the radio's transmit power.
vcoubard 1183:1589830dbdb7 666 *
vcoubard 1183:1589830dbdb7 667 * @param[in] txPower
vcoubard 1183:1589830dbdb7 668 * Radio's transmit power in dBm.
vcoubard 1183:1589830dbdb7 669 *
vcoubard 1183:1589830dbdb7 670 * @return BLE_ERROR_NONE if the new radio's transmit power was set
vcoubard 1183:1589830dbdb7 671 * correctly.
vcoubard 1131:692ddf04fc42 672 */
vcoubard 1131:692ddf04fc42 673 virtual ble_error_t setTxPower(int8_t txPower) {
vcoubard 1131:692ddf04fc42 674 /* Avoid compiler warnings about unused variables. */
vcoubard 1131:692ddf04fc42 675 (void)txPower;
vcoubard 1131:692ddf04fc42 676
vcoubard 1131:692ddf04fc42 677 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 678 }
vcoubard 1131:692ddf04fc42 679
vcoubard 1131:692ddf04fc42 680 /**
vcoubard 1131:692ddf04fc42 681 * Query the underlying stack for permitted arguments for setTxPower().
vcoubard 1131:692ddf04fc42 682 *
vcoubard 1131:692ddf04fc42 683 * @param[out] valueArrayPP
vcoubard 1131:692ddf04fc42 684 * Out parameter to receive the immutable array of Tx values.
vcoubard 1131:692ddf04fc42 685 * @param[out] countP
vcoubard 1131:692ddf04fc42 686 * Out parameter to receive the array's size.
vcoubard 1131:692ddf04fc42 687 */
vcoubard 1131:692ddf04fc42 688 virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
vcoubard 1131:692ddf04fc42 689 /* Avoid compiler warnings about unused variables. */
vcoubard 1131:692ddf04fc42 690 (void)valueArrayPP;
vcoubard 1131:692ddf04fc42 691 (void)countP;
vcoubard 1131:692ddf04fc42 692
vcoubard 1131:692ddf04fc42 693 *countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 694 }
vcoubard 1131:692ddf04fc42 695
vcoubard 1135:22aada733dbd 696 /**
vcoubard 1183:1589830dbdb7 697 * Get the maximum size of the whitelist.
vcoubard 1183:1589830dbdb7 698 *
vcoubard 1135:22aada733dbd 699 * @return Maximum size of the whitelist.
vcoubard 1135:22aada733dbd 700 *
vcoubard 1183:1589830dbdb7 701 * @note If using mbed OS the size of the whitelist can be configured by
vcoubard 1183:1589830dbdb7 702 * setting the YOTTA_CFG_WHITELIST_MAX_SIZE macro in your yotta
vcoubard 1183:1589830dbdb7 703 * config file.
vcoubard 1183:1589830dbdb7 704 *
vcoubard 1135:22aada733dbd 705 * @experimental
vcoubard 1135:22aada733dbd 706 */
vcoubard 1135:22aada733dbd 707 virtual uint8_t getMaxWhitelistSize(void) const
vcoubard 1135:22aada733dbd 708 {
vcoubard 1135:22aada733dbd 709 return 0;
vcoubard 1135:22aada733dbd 710 }
vcoubard 1135:22aada733dbd 711
vcoubard 1135:22aada733dbd 712 /**
vcoubard 1135:22aada733dbd 713 * Get the internal whitelist to be used by the Link Layer when scanning,
vcoubard 1135:22aada733dbd 714 * advertising or initiating a connection depending on the filter policies.
vcoubard 1135:22aada733dbd 715 *
vcoubard 1183:1589830dbdb7 716 * @param[in,out] whitelist
vcoubard 1135:22aada733dbd 717 * (on input) whitelist.capacity contains the maximum number
vcoubard 1135:22aada733dbd 718 * of addresses to be returned.
vcoubard 1135:22aada733dbd 719 * (on output) The populated whitelist with copies of the
vcoubard 1135:22aada733dbd 720 * addresses in the implementation's whitelist.
vcoubard 1135:22aada733dbd 721 *
vcoubard 1135:22aada733dbd 722 * @return BLE_ERROR_NONE if the implementation's whitelist was successfully
vcoubard 1135:22aada733dbd 723 * copied into the supplied reference.
vcoubard 1135:22aada733dbd 724 *
vcoubard 1135:22aada733dbd 725 * @experimental
vcoubard 1135:22aada733dbd 726 */
vcoubard 1135:22aada733dbd 727 virtual ble_error_t getWhitelist(Whitelist_t &whitelist) const
vcoubard 1135:22aada733dbd 728 {
vcoubard 1135:22aada733dbd 729 (void) whitelist;
vcoubard 1135:22aada733dbd 730 return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard 1135:22aada733dbd 731 }
vcoubard 1135:22aada733dbd 732
vcoubard 1135:22aada733dbd 733 /**
vcoubard 1135:22aada733dbd 734 * Set the internal whitelist to be used by the Link Layer when scanning,
vcoubard 1135:22aada733dbd 735 * advertising or initiating a connection depending on the filter policies.
vcoubard 1135:22aada733dbd 736 *
vcoubard 1135:22aada733dbd 737 * @param[in] whitelist
vcoubard 1135:22aada733dbd 738 * A reference to a whitelist containing the addresses to
vcoubard 1135:22aada733dbd 739 * be added to the internal whitelist.
vcoubard 1135:22aada733dbd 740 *
vcoubard 1135:22aada733dbd 741 * @return BLE_ERROR_NONE if the implementation's whitelist was successfully
vcoubard 1135:22aada733dbd 742 * populated with the addresses in the given whitelist.
vcoubard 1135:22aada733dbd 743 *
vcoubard 1135:22aada733dbd 744 * @note The whitelist must not contain addresses of type @ref
vcoubard 1135:22aada733dbd 745 * BLEProtocol::AddressType_t::RANDOM_PRIVATE_NON_RESOLVABLE, this
vcoubard 1135:22aada733dbd 746 * this will result in a @ref BLE_ERROR_INVALID_PARAM since the
vcoubard 1135:22aada733dbd 747 * remote peer might change its private address at any time and it
vcoubard 1135:22aada733dbd 748 * is not possible to resolve it.
vcoubard 1135:22aada733dbd 749 * @note If the input whitelist is larger than @ref getMaxWhitelistSize()
vcoubard 1135:22aada733dbd 750 * the @ref BLE_ERROR_PARAM_OUT_OF_RANGE is returned.
vcoubard 1135:22aada733dbd 751 *
vcoubard 1135:22aada733dbd 752 * @experimental
vcoubard 1135:22aada733dbd 753 */
vcoubard 1135:22aada733dbd 754 virtual ble_error_t setWhitelist(const Whitelist_t &whitelist)
vcoubard 1135:22aada733dbd 755 {
vcoubard 1135:22aada733dbd 756 (void) whitelist;
vcoubard 1135:22aada733dbd 757 return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard 1135:22aada733dbd 758 }
vcoubard 1135:22aada733dbd 759
vcoubard 1135:22aada733dbd 760 /**
vcoubard 1135:22aada733dbd 761 * Set the advertising policy filter mode to be used in the next call
vcoubard 1135:22aada733dbd 762 * to startAdvertising().
vcoubard 1135:22aada733dbd 763 *
vcoubard 1135:22aada733dbd 764 * @param[in] mode
vcoubard 1135:22aada733dbd 765 * The new advertising policy filter mode.
vcoubard 1135:22aada733dbd 766 *
vcoubard 1135:22aada733dbd 767 * @return BLE_ERROR_NONE if the specified policy filter mode was set
vcoubard 1135:22aada733dbd 768 * successfully.
vcoubard 1135:22aada733dbd 769 *
vcoubard 1135:22aada733dbd 770 * @experimental
vcoubard 1135:22aada733dbd 771 */
vcoubard 1135:22aada733dbd 772 virtual ble_error_t setAdvertisingPolicyMode(AdvertisingPolicyMode_t mode)
vcoubard 1135:22aada733dbd 773 {
vcoubard 1135:22aada733dbd 774 (void) mode;
vcoubard 1135:22aada733dbd 775 return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard 1135:22aada733dbd 776 }
vcoubard 1135:22aada733dbd 777
vcoubard 1135:22aada733dbd 778 /**
vcoubard 1135:22aada733dbd 779 * Set the scan policy filter mode to be used in the next call
vcoubard 1135:22aada733dbd 780 * to startScan().
vcoubard 1135:22aada733dbd 781 *
vcoubard 1135:22aada733dbd 782 * @param[in] mode
vcoubard 1135:22aada733dbd 783 * The new scan policy filter mode.
vcoubard 1135:22aada733dbd 784 *
vcoubard 1135:22aada733dbd 785 * @return BLE_ERROR_NONE if the specified policy filter mode was set
vcoubard 1135:22aada733dbd 786 * successfully.
vcoubard 1135:22aada733dbd 787 *
vcoubard 1135:22aada733dbd 788 * @experimental
vcoubard 1135:22aada733dbd 789 */
vcoubard 1135:22aada733dbd 790 virtual ble_error_t setScanningPolicyMode(ScanningPolicyMode_t mode)
vcoubard 1135:22aada733dbd 791 {
vcoubard 1135:22aada733dbd 792 (void) mode;
vcoubard 1135:22aada733dbd 793 return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard 1135:22aada733dbd 794 }
vcoubard 1135:22aada733dbd 795
vcoubard 1135:22aada733dbd 796 /**
vcoubard 1135:22aada733dbd 797 * Set the initiator policy filter mode to be used.
vcoubard 1135:22aada733dbd 798 *
vcoubard 1135:22aada733dbd 799 * @param[in] mode
vcoubard 1135:22aada733dbd 800 * The new initiator policy filter mode.
vcoubard 1135:22aada733dbd 801 *
vcoubard 1135:22aada733dbd 802 * @return BLE_ERROR_NONE if the specified policy filter mode was set
vcoubard 1135:22aada733dbd 803 * successfully.
vcoubard 1135:22aada733dbd 804 *
vcoubard 1135:22aada733dbd 805 * @experimental
vcoubard 1135:22aada733dbd 806 */
vcoubard 1135:22aada733dbd 807 virtual ble_error_t setInitiatorPolicyMode(InitiatorPolicyMode_t mode)
vcoubard 1135:22aada733dbd 808 {
vcoubard 1135:22aada733dbd 809 (void) mode;
vcoubard 1135:22aada733dbd 810 return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard 1135:22aada733dbd 811 }
vcoubard 1135:22aada733dbd 812
vcoubard 1135:22aada733dbd 813 /**
vcoubard 1135:22aada733dbd 814 * Get the advertising policy filter mode that will be used in the next
vcoubard 1135:22aada733dbd 815 * call to startAdvertising().
vcoubard 1135:22aada733dbd 816 *
vcoubard 1135:22aada733dbd 817 * @return The set advertising policy filter mode.
vcoubard 1135:22aada733dbd 818 *
vcoubard 1135:22aada733dbd 819 * @experimental
vcoubard 1135:22aada733dbd 820 */
vcoubard 1135:22aada733dbd 821 virtual AdvertisingPolicyMode_t getAdvertisingPolicyMode(void) const
vcoubard 1135:22aada733dbd 822 {
vcoubard 1135:22aada733dbd 823 return ADV_POLICY_IGNORE_WHITELIST;
vcoubard 1135:22aada733dbd 824 }
vcoubard 1135:22aada733dbd 825
vcoubard 1135:22aada733dbd 826 /**
vcoubard 1135:22aada733dbd 827 * Get the scan policy filter mode that will be used in the next
vcoubard 1135:22aada733dbd 828 * call to startScan().
vcoubard 1135:22aada733dbd 829 *
vcoubard 1135:22aada733dbd 830 * @return The set scan policy filter mode.
vcoubard 1135:22aada733dbd 831 *
vcoubard 1135:22aada733dbd 832 * @experimental
vcoubard 1135:22aada733dbd 833 */
vcoubard 1135:22aada733dbd 834 virtual ScanningPolicyMode_t getScanningPolicyMode(void) const
vcoubard 1135:22aada733dbd 835 {
vcoubard 1135:22aada733dbd 836 return SCAN_POLICY_IGNORE_WHITELIST;
vcoubard 1135:22aada733dbd 837 }
vcoubard 1135:22aada733dbd 838
vcoubard 1135:22aada733dbd 839 /**
vcoubard 1135:22aada733dbd 840 * Get the initiator policy filter mode that will be used.
vcoubard 1135:22aada733dbd 841 *
vcoubard 1135:22aada733dbd 842 * @return The set scan policy filter mode.
vcoubard 1135:22aada733dbd 843 *
vcoubard 1135:22aada733dbd 844 * @experimental
vcoubard 1135:22aada733dbd 845 */
vcoubard 1135:22aada733dbd 846 virtual InitiatorPolicyMode_t getInitiatorPolicyMode(void) const
vcoubard 1135:22aada733dbd 847 {
vcoubard 1135:22aada733dbd 848 return INIT_POLICY_IGNORE_WHITELIST;
vcoubard 1135:22aada733dbd 849 }
vcoubard 1135:22aada733dbd 850
vcoubard 1192:718787de23b7 851
vcoubard 1131:692ddf04fc42 852 protected:
vcoubard 1131:692ddf04fc42 853 /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
vcoubard 1183:1589830dbdb7 854
vcoubard 1183:1589830dbdb7 855 /**
vcoubard 1183:1589830dbdb7 856 * Start scanning procedure in the underlying BLE stack.
vcoubard 1183:1589830dbdb7 857 *
vcoubard 1183:1589830dbdb7 858 * @param[in] scanningParams
vcoubard 1183:1589830dbdb7 859 * The GAP scanning parameters.
vcoubard 1183:1589830dbdb7 860 *
vcoubard 1183:1589830dbdb7 861 * @return BLE_ERROR_NONE if the scan procedure started successfully.
vcoubard 1183:1589830dbdb7 862 */
vcoubard 1131:692ddf04fc42 863 virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
vcoubard 1131:692ddf04fc42 864 (void)scanningParams;
vcoubard 1131:692ddf04fc42 865 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 866 }
vcoubard 1131:692ddf04fc42 867
vcoubard 1131:692ddf04fc42 868 /*
vcoubard 1131:692ddf04fc42 869 * APIs with non-virtual implementations.
vcoubard 1131:692ddf04fc42 870 */
vcoubard 1131:692ddf04fc42 871 public:
vcoubard 1131:692ddf04fc42 872 /**
vcoubard 1183:1589830dbdb7 873 * Get the current GAP state of the device using a bitmask that
vcoubard 1131:692ddf04fc42 874 * describes whether the device is advertising or connected.
vcoubard 1183:1589830dbdb7 875 *
vcoubard 1183:1589830dbdb7 876 * @return The current GAP state of the device.
vcoubard 1131:692ddf04fc42 877 */
vcoubard 1131:692ddf04fc42 878 GapState_t getState(void) const {
vcoubard 1131:692ddf04fc42 879 return state;
vcoubard 1131:692ddf04fc42 880 }
vcoubard 1131:692ddf04fc42 881
vcoubard 1131:692ddf04fc42 882 /**
vcoubard 1131:692ddf04fc42 883 * Set the GAP advertising mode to use for this device.
vcoubard 1183:1589830dbdb7 884 *
vcoubard 1183:1589830dbdb7 885 * @param[in] advType
vcoubard 1183:1589830dbdb7 886 * The new type of the advertising packets.
vcoubard 1131:692ddf04fc42 887 */
vcoubard 1131:692ddf04fc42 888 void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
vcoubard 1131:692ddf04fc42 889 _advParams.setAdvertisingType(advType);
vcoubard 1131:692ddf04fc42 890 }
vcoubard 1131:692ddf04fc42 891
vcoubard 1131:692ddf04fc42 892 /**
vcoubard 1183:1589830dbdb7 893 * Set the advertising interval.
vcoubard 1183:1589830dbdb7 894 *
vcoubard 1131:692ddf04fc42 895 * @param[in] interval
vcoubard 1131:692ddf04fc42 896 * Advertising interval in units of milliseconds. Advertising
vcoubard 1131:692ddf04fc42 897 * is disabled if interval is 0. If interval is smaller than
vcoubard 1131:692ddf04fc42 898 * the minimum supported value, then the minimum supported
vcoubard 1131:692ddf04fc42 899 * value is used instead. This minimum value can be discovered
vcoubard 1131:692ddf04fc42 900 * using getMinAdvertisingInterval().
vcoubard 1131:692ddf04fc42 901 *
vcoubard 1131:692ddf04fc42 902 * This field must be set to 0 if connectionMode is equal
vcoubard 1131:692ddf04fc42 903 * to ADV_CONNECTABLE_DIRECTED.
vcoubard 1131:692ddf04fc42 904 *
vcoubard 1183:1589830dbdb7 905 * @note Decreasing this value will allow central devices to detect a
vcoubard 1183:1589830dbdb7 906 * peripheral faster, at the expense of more power being used by the radio
vcoubard 1183:1589830dbdb7 907 * due to the higher data transmit rate.
vcoubard 1131:692ddf04fc42 908 *
vcoubard 1183:1589830dbdb7 909 * @note [WARNING] This API previously used 0.625ms as the unit for its
vcoubard 1183:1589830dbdb7 910 * @p interval argument. That required an explicit conversion from
vcoubard 1183:1589830dbdb7 911 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
vcoubard 1183:1589830dbdb7 912 * no longer required as the new units are milliseconds. Any application
vcoubard 1183:1589830dbdb7 913 * code depending on the old semantics needs to be updated accordingly.
vcoubard 1131:692ddf04fc42 914 */
vcoubard 1131:692ddf04fc42 915 void setAdvertisingInterval(uint16_t interval) {
vcoubard 1131:692ddf04fc42 916 if (interval == 0) {
vcoubard 1131:692ddf04fc42 917 stopAdvertising();
vcoubard 1131:692ddf04fc42 918 } else if (interval < getMinAdvertisingInterval()) {
vcoubard 1131:692ddf04fc42 919 interval = getMinAdvertisingInterval();
vcoubard 1131:692ddf04fc42 920 }
vcoubard 1131:692ddf04fc42 921 _advParams.setInterval(interval);
vcoubard 1131:692ddf04fc42 922 }
vcoubard 1131:692ddf04fc42 923
vcoubard 1131:692ddf04fc42 924 /**
vcoubard 1183:1589830dbdb7 925 * Set the advertising timeout. The length of time to advertise for before
vcoubard 1183:1589830dbdb7 926 * a timeout event is generated.
vcoubard 1183:1589830dbdb7 927 *
vcoubard 1131:692ddf04fc42 928 * @param[in] timeout
vcoubard 1131:692ddf04fc42 929 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
vcoubard 1131:692ddf04fc42 930 * and 16383). Use 0 to disable the advertising timeout.
vcoubard 1131:692ddf04fc42 931 */
vcoubard 1131:692ddf04fc42 932 void setAdvertisingTimeout(uint16_t timeout) {
vcoubard 1131:692ddf04fc42 933 _advParams.setTimeout(timeout);
vcoubard 1131:692ddf04fc42 934 }
vcoubard 1131:692ddf04fc42 935
vcoubard 1131:692ddf04fc42 936 /**
vcoubard 1131:692ddf04fc42 937 * Start advertising.
vcoubard 1183:1589830dbdb7 938 *
vcoubard 1183:1589830dbdb7 939 * @return BLE_ERROR_NONE if the device started advertising successfully.
vcoubard 1131:692ddf04fc42 940 */
vcoubard 1131:692ddf04fc42 941 ble_error_t startAdvertising(void) {
vcoubard 1191:c8635748feec 942 ble_error_t rc;
vcoubard 1192:718787de23b7 943 setAdvertisingData(); /* Update the underlying stack. */
vcoubard 1191:c8635748feec 944 if ((rc = startAdvertising(_advParams)) == BLE_ERROR_NONE) {
vcoubard 1191:c8635748feec 945 state.advertising = 1;
vcoubard 1191:c8635748feec 946 }
vcoubard 1191:c8635748feec 947 return rc;
vcoubard 1131:692ddf04fc42 948 }
vcoubard 1131:692ddf04fc42 949
vcoubard 1131:692ddf04fc42 950 /**
vcoubard 1131:692ddf04fc42 951 * Reset any advertising payload prepared from prior calls to
vcoubard 1131:692ddf04fc42 952 * accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard 1131:692ddf04fc42 953 * initialized advertising payload to the underlying stack.
vcoubard 1131:692ddf04fc42 954 */
vcoubard 1131:692ddf04fc42 955 void clearAdvertisingPayload(void) {
vcoubard 1131:692ddf04fc42 956 _advPayload.clear();
vcoubard 1192:718787de23b7 957 setAdvertisingData();
vcoubard 1131:692ddf04fc42 958 }
vcoubard 1131:692ddf04fc42 959
vcoubard 1131:692ddf04fc42 960 /**
vcoubard 1131:692ddf04fc42 961 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1131:692ddf04fc42 962 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1131:692ddf04fc42 963 * as an additional 31 bytes if the advertising payload is too
vcoubard 1131:692ddf04fc42 964 * small.
vcoubard 1131:692ddf04fc42 965 *
vcoubard 1131:692ddf04fc42 966 * @param[in] flags
vcoubard 1131:692ddf04fc42 967 * The flags to be added. Please refer to
vcoubard 1131:692ddf04fc42 968 * GapAdvertisingData::Flags for valid flags. Multiple
vcoubard 1131:692ddf04fc42 969 * flags may be specified in combination.
vcoubard 1183:1589830dbdb7 970 *
vcoubard 1183:1589830dbdb7 971 * @return BLE_ERROR_NONE if the data was successfully added to the
vcoubard 1183:1589830dbdb7 972 * advertising payload.
vcoubard 1131:692ddf04fc42 973 */
vcoubard 1131:692ddf04fc42 974 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
vcoubard 1131:692ddf04fc42 975 ble_error_t rc;
vcoubard 1192:718787de23b7 976 if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
vcoubard 1131:692ddf04fc42 977 return rc;
vcoubard 1131:692ddf04fc42 978 }
vcoubard 1131:692ddf04fc42 979
vcoubard 1192:718787de23b7 980 return setAdvertisingData();
vcoubard 1131:692ddf04fc42 981 }
vcoubard 1131:692ddf04fc42 982
vcoubard 1131:692ddf04fc42 983 /**
vcoubard 1131:692ddf04fc42 984 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1131:692ddf04fc42 985 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1131:692ddf04fc42 986 * as an additional 31 bytes if the advertising payload is too
vcoubard 1131:692ddf04fc42 987 * small.
vcoubard 1131:692ddf04fc42 988 *
vcoubard 1183:1589830dbdb7 989 * @param[in] app
vcoubard 1183:1589830dbdb7 990 * The appearance of the peripheral.
vcoubard 1183:1589830dbdb7 991 *
vcoubard 1183:1589830dbdb7 992 * @return BLE_ERROR_NONE if the data was successfully added to the
vcoubard 1183:1589830dbdb7 993 * advertising payload.
vcoubard 1131:692ddf04fc42 994 */
vcoubard 1131:692ddf04fc42 995 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
vcoubard 1192:718787de23b7 996 setAppearance(app);
vcoubard 1192:718787de23b7 997
vcoubard 1131:692ddf04fc42 998 ble_error_t rc;
vcoubard 1192:718787de23b7 999 if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
vcoubard 1131:692ddf04fc42 1000 return rc;
vcoubard 1131:692ddf04fc42 1001 }
vcoubard 1131:692ddf04fc42 1002
vcoubard 1192:718787de23b7 1003 return setAdvertisingData();
vcoubard 1131:692ddf04fc42 1004 }
vcoubard 1131:692ddf04fc42 1005
vcoubard 1131:692ddf04fc42 1006 /**
vcoubard 1131:692ddf04fc42 1007 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1131:692ddf04fc42 1008 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1131:692ddf04fc42 1009 * as an additional 31 bytes if the advertising payload is too
vcoubard 1131:692ddf04fc42 1010 * small.
vcoubard 1131:692ddf04fc42 1011 *
vcoubard 1183:1589830dbdb7 1012 * @param[in] power
vcoubard 1183:1589830dbdb7 1013 * The max transmit power to be used by the controller (in dBm).
vcoubard 1183:1589830dbdb7 1014 *
vcoubard 1183:1589830dbdb7 1015 * @return BLE_ERROR_NONE if the data was successfully added to the
vcoubard 1183:1589830dbdb7 1016 * advertising payload.
vcoubard 1131:692ddf04fc42 1017 */
vcoubard 1131:692ddf04fc42 1018 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
vcoubard 1131:692ddf04fc42 1019 ble_error_t rc;
vcoubard 1192:718787de23b7 1020 if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
vcoubard 1131:692ddf04fc42 1021 return rc;
vcoubard 1131:692ddf04fc42 1022 }
vcoubard 1131:692ddf04fc42 1023
vcoubard 1192:718787de23b7 1024 return setAdvertisingData();
vcoubard 1131:692ddf04fc42 1025 }
vcoubard 1131:692ddf04fc42 1026
vcoubard 1131:692ddf04fc42 1027 /**
vcoubard 1131:692ddf04fc42 1028 * Accumulate a variable length byte-stream as an AD structure in the
vcoubard 1131:692ddf04fc42 1029 * advertising payload. Please note that the payload is limited to 31 bytes.
vcoubard 1131:692ddf04fc42 1030 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard 1131:692ddf04fc42 1031 * advertising payload is too small.
vcoubard 1131:692ddf04fc42 1032 *
vcoubard 1183:1589830dbdb7 1033 * @param[in] type
vcoubard 1183:1589830dbdb7 1034 * The type describing the variable length data.
vcoubard 1183:1589830dbdb7 1035 * @param[in] data
vcoubard 1183:1589830dbdb7 1036 * Data bytes.
vcoubard 1183:1589830dbdb7 1037 * @param[in] len
vcoubard 1183:1589830dbdb7 1038 * Length of data.
vcoubard 1135:22aada733dbd 1039 *
vcoubard 1135:22aada733dbd 1040 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard 1135:22aada733dbd 1041 * matching AD type; otherwise, an appropriate error.
vcoubard 1135:22aada733dbd 1042 *
vcoubard 1135:22aada733dbd 1043 * @note When the specified AD type is INCOMPLETE_LIST_16BIT_SERVICE_IDS,
vcoubard 1135:22aada733dbd 1044 * COMPLETE_LIST_16BIT_SERVICE_IDS, INCOMPLETE_LIST_32BIT_SERVICE_IDS,
vcoubard 1135:22aada733dbd 1045 * COMPLETE_LIST_32BIT_SERVICE_IDS, INCOMPLETE_LIST_128BIT_SERVICE_IDS,
vcoubard 1135:22aada733dbd 1046 * COMPLETE_LIST_128BIT_SERVICE_IDS or LIST_128BIT_SOLICITATION_IDS the
vcoubard 1135:22aada733dbd 1047 * supplied value is appended to the values previously added to the
vcoubard 1135:22aada733dbd 1048 * payload.
vcoubard 1131:692ddf04fc42 1049 */
vcoubard 1131:692ddf04fc42 1050 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard 1192:718787de23b7 1051 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
vcoubard 1192:718787de23b7 1052 setDeviceName(data);
vcoubard 1192:718787de23b7 1053 }
vcoubard 1192:718787de23b7 1054
vcoubard 1131:692ddf04fc42 1055 ble_error_t rc;
vcoubard 1192:718787de23b7 1056 if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
vcoubard 1131:692ddf04fc42 1057 return rc;
vcoubard 1131:692ddf04fc42 1058 }
vcoubard 1131:692ddf04fc42 1059
vcoubard 1192:718787de23b7 1060 return setAdvertisingData();
vcoubard 1131:692ddf04fc42 1061 }
vcoubard 1131:692ddf04fc42 1062
vcoubard 1131:692ddf04fc42 1063 /**
vcoubard 1131:692ddf04fc42 1064 * Update a particular ADV field in the advertising payload (based on
vcoubard 1135:22aada733dbd 1065 * matching type).
vcoubard 1131:692ddf04fc42 1066 *
vcoubard 1183:1589830dbdb7 1067 * @param[in] type
vcoubard 1183:1589830dbdb7 1068 * The ADV type field describing the variable length data.
vcoubard 1183:1589830dbdb7 1069 * @param[in] data
vcoubard 1183:1589830dbdb7 1070 * Data bytes.
vcoubard 1183:1589830dbdb7 1071 * @param[in] len
vcoubard 1183:1589830dbdb7 1072 * Length of data.
vcoubard 1131:692ddf04fc42 1073 *
vcoubard 1183:1589830dbdb7 1074 * @note If advertisements are enabled, then the update will take effect immediately.
vcoubard 1131:692ddf04fc42 1075 *
vcoubard 1131:692ddf04fc42 1076 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard 1135:22aada733dbd 1077 * matching AD type; otherwise, an appropriate error.
vcoubard 1131:692ddf04fc42 1078 */
vcoubard 1131:692ddf04fc42 1079 ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard 1192:718787de23b7 1080 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
vcoubard 1192:718787de23b7 1081 setDeviceName(data);
vcoubard 1192:718787de23b7 1082 }
vcoubard 1192:718787de23b7 1083
vcoubard 1131:692ddf04fc42 1084 ble_error_t rc;
vcoubard 1192:718787de23b7 1085 if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
vcoubard 1131:692ddf04fc42 1086 return rc;
vcoubard 1131:692ddf04fc42 1087 }
vcoubard 1131:692ddf04fc42 1088
vcoubard 1192:718787de23b7 1089 return setAdvertisingData();
vcoubard 1131:692ddf04fc42 1090 }
vcoubard 1131:692ddf04fc42 1091
vcoubard 1131:692ddf04fc42 1092 /**
vcoubard 1131:692ddf04fc42 1093 * Set up a particular, user-constructed advertisement payload for the
vcoubard 1131:692ddf04fc42 1094 * underlying stack. It would be uncommon for this API to be used directly;
vcoubard 1183:1589830dbdb7 1095 * there are other APIs to build an advertisement payload (refer to
vcoubard 1183:1589830dbdb7 1096 * Gap::accumulateAdvertisingPayload()).
vcoubard 1183:1589830dbdb7 1097 *
vcoubard 1183:1589830dbdb7 1098 * @param[in] payload
vcoubard 1183:1589830dbdb7 1099 * A reference to a user constructed advertisement
vcoubard 1183:1589830dbdb7 1100 * payload.
vcoubard 1183:1589830dbdb7 1101 *
vcoubard 1183:1589830dbdb7 1102 * @return BLE_ERROR_NONE if the advertisement payload was successfully
vcoubard 1183:1589830dbdb7 1103 * set.
vcoubard 1131:692ddf04fc42 1104 */
vcoubard 1131:692ddf04fc42 1105 ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
vcoubard 1192:718787de23b7 1106 _advPayload = payload;
vcoubard 1192:718787de23b7 1107 return setAdvertisingData();
vcoubard 1131:692ddf04fc42 1108 }
vcoubard 1131:692ddf04fc42 1109
vcoubard 1131:692ddf04fc42 1110 /**
vcoubard 1183:1589830dbdb7 1111 * Get a reference to the advertising payload.
vcoubard 1183:1589830dbdb7 1112 *
vcoubard 1183:1589830dbdb7 1113 * @return Read back advertising data.
vcoubard 1183:1589830dbdb7 1114 *
vcoubard 1183:1589830dbdb7 1115 * @note Useful for storing and restoring payload.
vcoubard 1131:692ddf04fc42 1116 */
vcoubard 1131:692ddf04fc42 1117 const GapAdvertisingData &getAdvertisingPayload(void) const {
vcoubard 1131:692ddf04fc42 1118 return _advPayload;
vcoubard 1131:692ddf04fc42 1119 }
vcoubard 1131:692ddf04fc42 1120
vcoubard 1131:692ddf04fc42 1121 /**
vcoubard 1131:692ddf04fc42 1122 * Accumulate a variable length byte-stream as an AD structure in the
vcoubard 1131:692ddf04fc42 1123 * scanResponse payload.
vcoubard 1131:692ddf04fc42 1124 *
vcoubard 1183:1589830dbdb7 1125 * @param[in] type
vcoubard 1183:1589830dbdb7 1126 * The type describing the variable length data.
vcoubard 1183:1589830dbdb7 1127 * @param[in] data
vcoubard 1183:1589830dbdb7 1128 * Data bytes.
vcoubard 1183:1589830dbdb7 1129 * @param[in] len
vcoubard 1183:1589830dbdb7 1130 * Length of data.
vcoubard 1183:1589830dbdb7 1131 *
vcoubard 1183:1589830dbdb7 1132 * @return BLE_ERROR_NONE if the data was successfully added to the scan
vcoubard 1183:1589830dbdb7 1133 * response payload.
vcoubard 1131:692ddf04fc42 1134 */
vcoubard 1131:692ddf04fc42 1135 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard 1131:692ddf04fc42 1136 ble_error_t rc;
vcoubard 1192:718787de23b7 1137 if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
vcoubard 1131:692ddf04fc42 1138 return rc;
vcoubard 1131:692ddf04fc42 1139 }
vcoubard 1131:692ddf04fc42 1140
vcoubard 1192:718787de23b7 1141 return setAdvertisingData();
vcoubard 1131:692ddf04fc42 1142 }
vcoubard 1131:692ddf04fc42 1143
vcoubard 1131:692ddf04fc42 1144 /**
vcoubard 1131:692ddf04fc42 1145 * Reset any scan response prepared from prior calls to
vcoubard 1183:1589830dbdb7 1146 * Gap::accumulateScanResponse().
vcoubard 1131:692ddf04fc42 1147 *
vcoubard 1183:1589830dbdb7 1148 * @note This should be followed by a call to Gap::setAdvertisingPayload() or
vcoubard 1183:1589830dbdb7 1149 * Gap::startAdvertising() before the update takes effect.
vcoubard 1131:692ddf04fc42 1150 */
vcoubard 1131:692ddf04fc42 1151 void clearScanResponse(void) {
vcoubard 1131:692ddf04fc42 1152 _scanResponse.clear();
vcoubard 1192:718787de23b7 1153 setAdvertisingData();
vcoubard 1131:692ddf04fc42 1154 }
vcoubard 1131:692ddf04fc42 1155
vcoubard 1131:692ddf04fc42 1156 /**
vcoubard 1131:692ddf04fc42 1157 * Set up parameters for GAP scanning (observer mode).
vcoubard 1183:1589830dbdb7 1158 *
vcoubard 1131:692ddf04fc42 1159 * @param[in] interval
vcoubard 1131:692ddf04fc42 1160 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 1161 * @param[in] window
vcoubard 1131:692ddf04fc42 1162 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 1163 * @param[in] timeout
vcoubard 1131:692ddf04fc42 1164 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
vcoubard 1131:692ddf04fc42 1165 * @param[in] activeScanning
vcoubard 1131:692ddf04fc42 1166 * Set to True if active-scanning is required. This is used to fetch the
vcoubard 1131:692ddf04fc42 1167 * scan response from a peer if possible.
vcoubard 1131:692ddf04fc42 1168 *
vcoubard 1183:1589830dbdb7 1169 * @return BLE_ERROR_NONE if the scan parameters were correctly set.
vcoubard 1131:692ddf04fc42 1170 *
vcoubard 1183:1589830dbdb7 1171 * @note The scanning window divided by the interval determines the duty cycle for
vcoubard 1183:1589830dbdb7 1172 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1183:1589830dbdb7 1173 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1183:1589830dbdb7 1174 * to have the interval and window set to the same value. In this case,
vcoubard 1183:1589830dbdb7 1175 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1183:1589830dbdb7 1176 * interval.
vcoubard 1131:692ddf04fc42 1177 *
vcoubard 1183:1589830dbdb7 1178 * @note Once the scanning parameters have been configured, scanning can be
vcoubard 1183:1589830dbdb7 1179 * enabled by using startScan().
vcoubard 1183:1589830dbdb7 1180 *
vcoubard 1183:1589830dbdb7 1181 * @note The scan interval and window are recommendations to the BLE stack.
vcoubard 1131:692ddf04fc42 1182 */
vcoubard 1131:692ddf04fc42 1183 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
vcoubard 1131:692ddf04fc42 1184 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
vcoubard 1131:692ddf04fc42 1185 uint16_t timeout = 0,
vcoubard 1131:692ddf04fc42 1186 bool activeScanning = false) {
vcoubard 1131:692ddf04fc42 1187 ble_error_t rc;
vcoubard 1131:692ddf04fc42 1188 if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
vcoubard 1131:692ddf04fc42 1189 ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
vcoubard 1131:692ddf04fc42 1190 ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
vcoubard 1131:692ddf04fc42 1191 _scanningParams.setActiveScanning(activeScanning);
vcoubard 1131:692ddf04fc42 1192 return BLE_ERROR_NONE;
vcoubard 1131:692ddf04fc42 1193 }
vcoubard 1131:692ddf04fc42 1194
vcoubard 1131:692ddf04fc42 1195 return rc;
vcoubard 1131:692ddf04fc42 1196 }
vcoubard 1131:692ddf04fc42 1197
vcoubard 1131:692ddf04fc42 1198 /**
vcoubard 1131:692ddf04fc42 1199 * Set up the scanInterval parameter for GAP scanning (observer mode).
vcoubard 1183:1589830dbdb7 1200 *
vcoubard 1131:692ddf04fc42 1201 * @param[in] interval
vcoubard 1131:692ddf04fc42 1202 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 1203 *
vcoubard 1183:1589830dbdb7 1204 * @return BLE_ERROR_NONE if the scan interval was correctly set.
vcoubard 1131:692ddf04fc42 1205 *
vcoubard 1183:1589830dbdb7 1206 * @note The scanning window divided by the interval determines the duty cycle for
vcoubard 1183:1589830dbdb7 1207 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1183:1589830dbdb7 1208 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1183:1589830dbdb7 1209 * to have the interval and window set to the same value. In this case,
vcoubard 1183:1589830dbdb7 1210 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1183:1589830dbdb7 1211 * interval.
vcoubard 1183:1589830dbdb7 1212 *
vcoubard 1183:1589830dbdb7 1213 * @note Once the scanning parameters have been configured, scanning can be
vcoubard 1183:1589830dbdb7 1214 * enabled by using startScan().
vcoubard 1131:692ddf04fc42 1215 */
vcoubard 1131:692ddf04fc42 1216 ble_error_t setScanInterval(uint16_t interval) {
vcoubard 1131:692ddf04fc42 1217 return _scanningParams.setInterval(interval);
vcoubard 1131:692ddf04fc42 1218 }
vcoubard 1131:692ddf04fc42 1219
vcoubard 1131:692ddf04fc42 1220 /**
vcoubard 1131:692ddf04fc42 1221 * Set up the scanWindow parameter for GAP scanning (observer mode).
vcoubard 1183:1589830dbdb7 1222 *
vcoubard 1131:692ddf04fc42 1223 * @param[in] window
vcoubard 1131:692ddf04fc42 1224 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 1225 *
vcoubard 1183:1589830dbdb7 1226 * @return BLE_ERROR_NONE if the scan window was correctly set.
vcoubard 1131:692ddf04fc42 1227 *
vcoubard 1183:1589830dbdb7 1228 * @note The scanning window divided by the interval determines the duty cycle for
vcoubard 1183:1589830dbdb7 1229 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1183:1589830dbdb7 1230 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1183:1589830dbdb7 1231 * to have the interval and window set to the same value. In this case,
vcoubard 1183:1589830dbdb7 1232 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1183:1589830dbdb7 1233 * interval.
vcoubard 1131:692ddf04fc42 1234 *
vcoubard 1183:1589830dbdb7 1235 * @note Once the scanning parameters have been configured, scanning can be
vcoubard 1183:1589830dbdb7 1236 * enabled by using startScan().
vcoubard 1183:1589830dbdb7 1237 *
vcoubard 1183:1589830dbdb7 1238 * @note If scanning is already active, the updated value of scanWindow will be
vcoubard 1183:1589830dbdb7 1239 * propagated to the underlying BLE stack.
vcoubard 1131:692ddf04fc42 1240 */
vcoubard 1131:692ddf04fc42 1241 ble_error_t setScanWindow(uint16_t window) {
vcoubard 1131:692ddf04fc42 1242 ble_error_t rc;
vcoubard 1131:692ddf04fc42 1243 if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
vcoubard 1131:692ddf04fc42 1244 return rc;
vcoubard 1131:692ddf04fc42 1245 }
vcoubard 1131:692ddf04fc42 1246
vcoubard 1131:692ddf04fc42 1247 /* If scanning is already active, propagate the new setting to the stack. */
vcoubard 1131:692ddf04fc42 1248 if (scanningActive) {
vcoubard 1131:692ddf04fc42 1249 return startRadioScan(_scanningParams);
vcoubard 1131:692ddf04fc42 1250 }
vcoubard 1131:692ddf04fc42 1251
vcoubard 1131:692ddf04fc42 1252 return BLE_ERROR_NONE;
vcoubard 1131:692ddf04fc42 1253 }
vcoubard 1131:692ddf04fc42 1254
vcoubard 1131:692ddf04fc42 1255 /**
vcoubard 1131:692ddf04fc42 1256 * Set up parameters for GAP scanning (observer mode).
vcoubard 1183:1589830dbdb7 1257 *
vcoubard 1131:692ddf04fc42 1258 * @param[in] timeout
vcoubard 1131:692ddf04fc42 1259 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
vcoubard 1131:692ddf04fc42 1260 *
vcoubard 1183:1589830dbdb7 1261 * @return BLE_ERROR_NONE if the scan timeout was correctly set.
vcoubard 1131:692ddf04fc42 1262 *
vcoubard 1183:1589830dbdb7 1263 * @note Once the scanning parameters have been configured, scanning can be
vcoubard 1183:1589830dbdb7 1264 * enabled by using startScan().
vcoubard 1183:1589830dbdb7 1265 *
vcoubard 1183:1589830dbdb7 1266 * @note If scanning is already active, the updated value of scanTimeout will be
vcoubard 1183:1589830dbdb7 1267 * propagated to the underlying BLE stack.
vcoubard 1131:692ddf04fc42 1268 */
vcoubard 1131:692ddf04fc42 1269 ble_error_t setScanTimeout(uint16_t timeout) {
vcoubard 1131:692ddf04fc42 1270 ble_error_t rc;
vcoubard 1131:692ddf04fc42 1271 if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
vcoubard 1131:692ddf04fc42 1272 return rc;
vcoubard 1131:692ddf04fc42 1273 }
vcoubard 1131:692ddf04fc42 1274
vcoubard 1131:692ddf04fc42 1275 /* If scanning is already active, propagate the new settings to the stack. */
vcoubard 1131:692ddf04fc42 1276 if (scanningActive) {
vcoubard 1131:692ddf04fc42 1277 return startRadioScan(_scanningParams);
vcoubard 1131:692ddf04fc42 1278 }
vcoubard 1131:692ddf04fc42 1279
vcoubard 1131:692ddf04fc42 1280 return BLE_ERROR_NONE;
vcoubard 1131:692ddf04fc42 1281 }
vcoubard 1131:692ddf04fc42 1282
vcoubard 1131:692ddf04fc42 1283 /**
vcoubard 1183:1589830dbdb7 1284 * Modify the active scanning parameter for GAP scanning (observer mode).
vcoubard 1183:1589830dbdb7 1285 * This is used to fetch the scan response from a peer if possible.
vcoubard 1183:1589830dbdb7 1286 *
vcoubard 1131:692ddf04fc42 1287 * @param[in] activeScanning
vcoubard 1183:1589830dbdb7 1288 * Set to True if active-scanning is required.
vcoubard 1131:692ddf04fc42 1289 *
vcoubard 1183:1589830dbdb7 1290 * @return BLE_ERROR_NONE if active scanning was successfully set.
vcoubard 1131:692ddf04fc42 1291 *
vcoubard 1183:1589830dbdb7 1292 * @note Once the scanning parameters have been configured, scanning can be
vcoubard 1183:1589830dbdb7 1293 * enabled by using startScan().
vcoubard 1183:1589830dbdb7 1294 *
vcoubard 1183:1589830dbdb7 1295 * @note If scanning is already in progress, then active-scanning will be enabled
vcoubard 1183:1589830dbdb7 1296 * for the underlying BLE stack.
vcoubard 1131:692ddf04fc42 1297 */
vcoubard 1131:692ddf04fc42 1298 ble_error_t setActiveScanning(bool activeScanning) {
vcoubard 1131:692ddf04fc42 1299 _scanningParams.setActiveScanning(activeScanning);
vcoubard 1131:692ddf04fc42 1300
vcoubard 1131:692ddf04fc42 1301 /* If scanning is already active, propagate the new settings to the stack. */
vcoubard 1131:692ddf04fc42 1302 if (scanningActive) {
vcoubard 1131:692ddf04fc42 1303 return startRadioScan(_scanningParams);
vcoubard 1131:692ddf04fc42 1304 }
vcoubard 1131:692ddf04fc42 1305
vcoubard 1131:692ddf04fc42 1306 return BLE_ERROR_NONE;
vcoubard 1131:692ddf04fc42 1307 }
vcoubard 1131:692ddf04fc42 1308
vcoubard 1131:692ddf04fc42 1309 /**
vcoubard 1131:692ddf04fc42 1310 * Start scanning (Observer Procedure) based on the parameters currently in
vcoubard 1131:692ddf04fc42 1311 * effect.
vcoubard 1131:692ddf04fc42 1312 *
vcoubard 1131:692ddf04fc42 1313 * @param[in] callback
vcoubard 1131:692ddf04fc42 1314 * The application-specific callback to be invoked upon
vcoubard 1131:692ddf04fc42 1315 * receiving every advertisement report. This can be passed in
vcoubard 1131:692ddf04fc42 1316 * as NULL, in which case scanning may not be enabled at all.
vcoubard 1183:1589830dbdb7 1317 *
vcoubard 1183:1589830dbdb7 1318 * @return BLE_ERROR_NONE if the device successfully started the scan
vcoubard 1183:1589830dbdb7 1319 * procedure.
vcoubard 1131:692ddf04fc42 1320 */
vcoubard 1131:692ddf04fc42 1321 ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
vcoubard 1131:692ddf04fc42 1322 ble_error_t err = BLE_ERROR_NONE;
vcoubard 1131:692ddf04fc42 1323 if (callback) {
vcoubard 1131:692ddf04fc42 1324 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
vcoubard 1131:692ddf04fc42 1325 scanningActive = true;
vcoubard 1131:692ddf04fc42 1326 onAdvertisementReport.attach(callback);
vcoubard 1131:692ddf04fc42 1327 }
vcoubard 1131:692ddf04fc42 1328 }
vcoubard 1131:692ddf04fc42 1329
vcoubard 1131:692ddf04fc42 1330 return err;
vcoubard 1131:692ddf04fc42 1331 }
vcoubard 1131:692ddf04fc42 1332
vcoubard 1131:692ddf04fc42 1333 /**
vcoubard 1183:1589830dbdb7 1334 * Same as Gap::startScan(), but allows the possibility to add an object
vcoubard 1183:1589830dbdb7 1335 * reference and member function as handler for advertisement event
vcoubard 1183:1589830dbdb7 1336 * callbacks.
vcoubard 1183:1589830dbdb7 1337 *
vcoubard 1183:1589830dbdb7 1338 * @param[in] object
vcoubard 1183:1589830dbdb7 1339 * Pointer to the object of a class defining the member callback
vcoubard 1183:1589830dbdb7 1340 * function (@p callbackMember).
vcoubard 1183:1589830dbdb7 1341 * @param[in] callbackMember
vcoubard 1183:1589830dbdb7 1342 * The member callback (within the context of an object) to be
vcoubard 1183:1589830dbdb7 1343 * invoked.
vcoubard 1183:1589830dbdb7 1344 *
vcoubard 1183:1589830dbdb7 1345 * @return BLE_ERROR_NONE if the device successfully started the scan
vcoubard 1183:1589830dbdb7 1346 * procedure.
vcoubard 1131:692ddf04fc42 1347 */
vcoubard 1131:692ddf04fc42 1348 template<typename T>
vcoubard 1131:692ddf04fc42 1349 ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
vcoubard 1131:692ddf04fc42 1350 ble_error_t err = BLE_ERROR_NONE;
vcoubard 1131:692ddf04fc42 1351 if (object && callbackMember) {
vcoubard 1131:692ddf04fc42 1352 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
vcoubard 1131:692ddf04fc42 1353 scanningActive = true;
vcoubard 1131:692ddf04fc42 1354 onAdvertisementReport.attach(object, callbackMember);
vcoubard 1131:692ddf04fc42 1355 }
vcoubard 1131:692ddf04fc42 1356 }
vcoubard 1131:692ddf04fc42 1357
vcoubard 1131:692ddf04fc42 1358 return err;
vcoubard 1131:692ddf04fc42 1359 }
vcoubard 1131:692ddf04fc42 1360
vcoubard 1131:692ddf04fc42 1361 /**
vcoubard 1131:692ddf04fc42 1362 * Initialize radio-notification events to be generated from the stack.
vcoubard 1131:692ddf04fc42 1363 * This API doesn't need to be called directly.
vcoubard 1131:692ddf04fc42 1364 *
vcoubard 1131:692ddf04fc42 1365 * Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard 1131:692ddf04fc42 1366 * (nACTIVE) signals from the stack that notify the application when the
vcoubard 1131:692ddf04fc42 1367 * radio is in use.
vcoubard 1131:692ddf04fc42 1368 *
vcoubard 1131:692ddf04fc42 1369 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1131:692ddf04fc42 1370 * signal is sent at the end of the radio event. These signals can be used
vcoubard 1131:692ddf04fc42 1371 * by the application programmer to synchronize application logic with radio
vcoubard 1131:692ddf04fc42 1372 * activity. For example, the ACTIVE signal can be used to shut off external
vcoubard 1131:692ddf04fc42 1373 * devices, to manage peak current drawn during periods when the radio is on,
vcoubard 1131:692ddf04fc42 1374 * or to trigger sensor data collection for transmission in the Radio Event.
vcoubard 1131:692ddf04fc42 1375 *
vcoubard 1131:692ddf04fc42 1376 * @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
vcoubard 1131:692ddf04fc42 1377 */
vcoubard 1131:692ddf04fc42 1378 virtual ble_error_t initRadioNotification(void) {
vcoubard 1131:692ddf04fc42 1379 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard 1131:692ddf04fc42 1380 }
vcoubard 1131:692ddf04fc42 1381
vcoubard 1131:692ddf04fc42 1382 private:
vcoubard 1183:1589830dbdb7 1383 /**
vcoubard 1192:718787de23b7 1384 * Helper function used to set the advertising data in the underlying BLE stack.
vcoubard 1192:718787de23b7 1385 *
vcoubard 1192:718787de23b7 1386 * @return BLE_ERROR_NONE if the advertising data was successfully set.
vcoubard 1192:718787de23b7 1387 */
vcoubard 1192:718787de23b7 1388 ble_error_t setAdvertisingData(void) {
vcoubard 1192:718787de23b7 1389 return setAdvertisingData(_advPayload, _scanResponse);
vcoubard 1192:718787de23b7 1390 }
vcoubard 1192:718787de23b7 1391
vcoubard 1192:718787de23b7 1392 private:
vcoubard 1192:718787de23b7 1393 /**
vcoubard 1183:1589830dbdb7 1394 * Functionality that is BLE stack-dependent and must be implemented by the
vcoubard 1183:1589830dbdb7 1395 * ported. This is a helper function to set the advertising data in the
vcoubard 1183:1589830dbdb7 1396 * BLE stack.
vcoubard 1183:1589830dbdb7 1397 *
vcoubard 1183:1589830dbdb7 1398 * @param[in] advData
vcoubard 1183:1589830dbdb7 1399 * The new advertising data.
vcoubard 1183:1589830dbdb7 1400 * @param[in] scanResponse
vcoubard 1183:1589830dbdb7 1401 * The new scan response data.
vcoubard 1183:1589830dbdb7 1402 *
vcoubard 1183:1589830dbdb7 1403 * @return BLE_ERROR_NONE if the advertising data was set successfully.
vcoubard 1183:1589830dbdb7 1404 */
vcoubard 1131:692ddf04fc42 1405 virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
vcoubard 1183:1589830dbdb7 1406
vcoubard 1183:1589830dbdb7 1407 /**
vcoubard 1183:1589830dbdb7 1408 * Functionality that is BLE stack-dependent and must be implemented by the
vcoubard 1183:1589830dbdb7 1409 * ported. This is a helper function to start the advertising procedure in
vcoubard 1183:1589830dbdb7 1410 * the underlying BLE stack.
vcoubard 1183:1589830dbdb7 1411 *
vcoubard 1183:1589830dbdb7 1412 * @param[in]
vcoubard 1183:1589830dbdb7 1413 * The advertising parameters.
vcoubard 1183:1589830dbdb7 1414 *
vcoubard 1183:1589830dbdb7 1415 * @return BLE_ERROR_NONE if the advertising procedure was successfully
vcoubard 1183:1589830dbdb7 1416 * started.
vcoubard 1183:1589830dbdb7 1417 */
vcoubard 1131:692ddf04fc42 1418 virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
vcoubard 1131:692ddf04fc42 1419
vcoubard 1131:692ddf04fc42 1420 public:
vcoubard 1131:692ddf04fc42 1421 /**
vcoubard 1183:1589830dbdb7 1422 * Accessor to read back currently active advertising parameters.
vcoubard 1183:1589830dbdb7 1423 *
vcoubard 1183:1589830dbdb7 1424 * @return A reference to the current advertising parameters.
vcoubard 1131:692ddf04fc42 1425 */
vcoubard 1131:692ddf04fc42 1426 GapAdvertisingParams &getAdvertisingParams(void) {
vcoubard 1131:692ddf04fc42 1427 return _advParams;
vcoubard 1131:692ddf04fc42 1428 }
vcoubard 1183:1589830dbdb7 1429
vcoubard 1183:1589830dbdb7 1430 /**
vcoubard 1183:1589830dbdb7 1431 * A const alternative to Gap::getAdvertisingParams().
vcoubard 1183:1589830dbdb7 1432 *
vcoubard 1183:1589830dbdb7 1433 * @return A const reference to the current advertising parameters.
vcoubard 1183:1589830dbdb7 1434 */
vcoubard 1131:692ddf04fc42 1435 const GapAdvertisingParams &getAdvertisingParams(void) const {
vcoubard 1131:692ddf04fc42 1436 return _advParams;
vcoubard 1131:692ddf04fc42 1437 }
vcoubard 1131:692ddf04fc42 1438
vcoubard 1131:692ddf04fc42 1439 /**
vcoubard 1131:692ddf04fc42 1440 * Set up a particular, user-constructed set of advertisement parameters for
vcoubard 1131:692ddf04fc42 1441 * the underlying stack. It would be uncommon for this API to be used
vcoubard 1131:692ddf04fc42 1442 * directly; there are other APIs to tweak advertisement parameters
vcoubard 1131:692ddf04fc42 1443 * individually.
vcoubard 1183:1589830dbdb7 1444 *
vcoubard 1183:1589830dbdb7 1445 * @param[in] newParams
vcoubard 1183:1589830dbdb7 1446 * The new advertising parameters.
vcoubard 1131:692ddf04fc42 1447 */
vcoubard 1131:692ddf04fc42 1448 void setAdvertisingParams(const GapAdvertisingParams &newParams) {
vcoubard 1131:692ddf04fc42 1449 _advParams = newParams;
vcoubard 1131:692ddf04fc42 1450 }
vcoubard 1131:692ddf04fc42 1451
vcoubard 1131:692ddf04fc42 1452 /* Event callback handlers. */
vcoubard 1131:692ddf04fc42 1453 public:
vcoubard 1131:692ddf04fc42 1454 /**
vcoubard 1131:692ddf04fc42 1455 * Set up a callback for timeout events. Refer to TimeoutSource_t for
vcoubard 1131:692ddf04fc42 1456 * possible event types.
vcoubard 1183:1589830dbdb7 1457 *
vcoubard 1183:1589830dbdb7 1458 * @param[in] callback
vcoubard 1183:1589830dbdb7 1459 * Event handler being registered.
vcoubard 1183:1589830dbdb7 1460 *
vcoubard 1183:1589830dbdb7 1461 * @note It is possible to unregister callbacks using onTimeout().detach(callback).
vcoubard 1131:692ddf04fc42 1462 */
vcoubard 1131:692ddf04fc42 1463 void onTimeout(TimeoutEventCallback_t callback) {
vcoubard 1131:692ddf04fc42 1464 timeoutCallbackChain.add(callback);
vcoubard 1131:692ddf04fc42 1465 }
vcoubard 1131:692ddf04fc42 1466
vcoubard 1131:692ddf04fc42 1467 /**
vcoubard 1183:1589830dbdb7 1468 * @brief Provide access to the callchain of timeout event callbacks.
vcoubard 1183:1589830dbdb7 1469 *
vcoubard 1183:1589830dbdb7 1470 * @note It is possible to register callbacks using onTimeout().add(callback).
vcoubard 1183:1589830dbdb7 1471 *
vcoubard 1183:1589830dbdb7 1472 * @note It is possible to unregister callbacks using onTimeout().detach(callback).
vcoubard 1183:1589830dbdb7 1473 *
vcoubard 1183:1589830dbdb7 1474 * @return A reference to the timeout event callbacks chain.
vcoubard 1131:692ddf04fc42 1475 */
vcoubard 1131:692ddf04fc42 1476 TimeoutEventCallbackChain_t& onTimeout() {
vcoubard 1131:692ddf04fc42 1477 return timeoutCallbackChain;
vcoubard 1131:692ddf04fc42 1478 }
vcoubard 1131:692ddf04fc42 1479
vcoubard 1131:692ddf04fc42 1480 /**
vcoubard 1131:692ddf04fc42 1481 * Append to a chain of callbacks to be invoked upon GAP connection.
vcoubard 1183:1589830dbdb7 1482 *
vcoubard 1183:1589830dbdb7 1483 * @param[in] callback
vcoubard 1183:1589830dbdb7 1484 * Event handler being registered.
vcoubard 1183:1589830dbdb7 1485 *
vcoubard 1131:692ddf04fc42 1486 * @note It is possible to unregister callbacks using onConnection().detach(callback)
vcoubard 1131:692ddf04fc42 1487 */
vcoubard 1183:1589830dbdb7 1488 void onConnection(ConnectionEventCallback_t callback) {
vcoubard 1183:1589830dbdb7 1489 connectionCallChain.add(callback);
vcoubard 1183:1589830dbdb7 1490 }
vcoubard 1131:692ddf04fc42 1491
vcoubard 1131:692ddf04fc42 1492 /**
vcoubard 1183:1589830dbdb7 1493 * Same as Gap::onConnection(), but allows the possibility to add an object
vcoubard 1183:1589830dbdb7 1494 * reference and member function as handler for connection event
vcoubard 1183:1589830dbdb7 1495 * callbacks.
vcoubard 1183:1589830dbdb7 1496 *
vcoubard 1183:1589830dbdb7 1497 * @param[in] tptr
vcoubard 1183:1589830dbdb7 1498 * Pointer to the object of a class defining the member callback
vcoubard 1183:1589830dbdb7 1499 * function (@p mptr).
vcoubard 1183:1589830dbdb7 1500 * @param[in] mptr
vcoubard 1183:1589830dbdb7 1501 * The member callback (within the context of an object) to be
vcoubard 1183:1589830dbdb7 1502 * invoked.
vcoubard 1183:1589830dbdb7 1503 */
vcoubard 1183:1589830dbdb7 1504 template<typename T>
vcoubard 1183:1589830dbdb7 1505 void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {
vcoubard 1183:1589830dbdb7 1506 connectionCallChain.add(tptr, mptr);
vcoubard 1183:1589830dbdb7 1507 }
vcoubard 1183:1589830dbdb7 1508
vcoubard 1183:1589830dbdb7 1509 /**
vcoubard 1183:1589830dbdb7 1510 * @brief Provide access to the callchain of connection event callbacks.
vcoubard 1183:1589830dbdb7 1511 *
vcoubard 1183:1589830dbdb7 1512 * @return A reference to the connection event callbacks chain.
vcoubard 1183:1589830dbdb7 1513 *
vcoubard 1183:1589830dbdb7 1514 * @note It is possible to register callbacks using onConnection().add(callback).
vcoubard 1183:1589830dbdb7 1515 *
vcoubard 1183:1589830dbdb7 1516 * @note It is possible to unregister callbacks using onConnection().detach(callback).
vcoubard 1131:692ddf04fc42 1517 */
vcoubard 1132:6362b7c2fdff 1518 ConnectionEventCallbackChain_t& onConnection() {
vcoubard 1131:692ddf04fc42 1519 return connectionCallChain;
vcoubard 1131:692ddf04fc42 1520 }
vcoubard 1131:692ddf04fc42 1521
vcoubard 1131:692ddf04fc42 1522 /**
vcoubard 1131:692ddf04fc42 1523 * Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard 1183:1589830dbdb7 1524 *
vcoubard 1183:1589830dbdb7 1525 * @param[in] callback
vcoubard 1183:1589830dbdb7 1526 Event handler being registered.
vcoubard 1183:1589830dbdb7 1527 *
vcoubard 1183:1589830dbdb7 1528 * @note It is possible to unregister callbacks using onDisconnection().detach(callback).
vcoubard 1131:692ddf04fc42 1529 */
vcoubard 1183:1589830dbdb7 1530 void onDisconnection(DisconnectionEventCallback_t callback) {
vcoubard 1183:1589830dbdb7 1531 disconnectionCallChain.add(callback);
vcoubard 1183:1589830dbdb7 1532 }
vcoubard 1131:692ddf04fc42 1533
vcoubard 1131:692ddf04fc42 1534 /**
vcoubard 1183:1589830dbdb7 1535 * Same as Gap::onDisconnection(), but allows the possibility to add an object
vcoubard 1183:1589830dbdb7 1536 * reference and member function as handler for disconnection event
vcoubard 1183:1589830dbdb7 1537 * callbacks.
vcoubard 1183:1589830dbdb7 1538 *
vcoubard 1183:1589830dbdb7 1539 * @param[in] tptr
vcoubard 1183:1589830dbdb7 1540 * Pointer to the object of a class defining the member callback
vcoubard 1183:1589830dbdb7 1541 * function (@p mptr).
vcoubard 1183:1589830dbdb7 1542 * @param[in] mptr
vcoubard 1183:1589830dbdb7 1543 * The member callback (within the context of an object) to be
vcoubard 1183:1589830dbdb7 1544 * invoked.
vcoubard 1183:1589830dbdb7 1545 */
vcoubard 1183:1589830dbdb7 1546 template<typename T>
vcoubard 1183:1589830dbdb7 1547 void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {
vcoubard 1183:1589830dbdb7 1548 disconnectionCallChain.add(tptr, mptr);
vcoubard 1183:1589830dbdb7 1549 }
vcoubard 1183:1589830dbdb7 1550
vcoubard 1183:1589830dbdb7 1551 /**
vcoubard 1183:1589830dbdb7 1552 * @brief Provide access to the callchain of disconnection event callbacks.
vcoubard 1183:1589830dbdb7 1553 *
vcoubard 1183:1589830dbdb7 1554 * @return A reference to the disconnection event callback chain.
vcoubard 1183:1589830dbdb7 1555 *
vcoubard 1183:1589830dbdb7 1556 * @note It is possible to register callbacks using onDisconnection().add(callback).
vcoubard 1183:1589830dbdb7 1557 *
vcoubard 1183:1589830dbdb7 1558 * @note It is possible to unregister callbacks using onDisconnection().detach(callback).
vcoubard 1131:692ddf04fc42 1559 */
vcoubard 1131:692ddf04fc42 1560 DisconnectionEventCallbackChain_t& onDisconnection() {
vcoubard 1131:692ddf04fc42 1561 return disconnectionCallChain;
vcoubard 1131:692ddf04fc42 1562 }
vcoubard 1131:692ddf04fc42 1563
vcoubard 1131:692ddf04fc42 1564 /**
vcoubard 1131:692ddf04fc42 1565 * Set the application callback for radio-notification events.
vcoubard 1131:692ddf04fc42 1566 *
vcoubard 1131:692ddf04fc42 1567 * Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard 1131:692ddf04fc42 1568 * (nACTIVE) signals from the stack that notify the application when the
vcoubard 1131:692ddf04fc42 1569 * radio is in use.
vcoubard 1131:692ddf04fc42 1570 *
vcoubard 1131:692ddf04fc42 1571 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1131:692ddf04fc42 1572 * signal is sent at the end of the radio event. These signals can be used
vcoubard 1131:692ddf04fc42 1573 * by the application programmer to synchronize application logic with radio
vcoubard 1131:692ddf04fc42 1574 * activity. For example, the ACTIVE signal can be used to shut off external
vcoubard 1131:692ddf04fc42 1575 * devices, to manage peak current drawn during periods when the radio is on,
vcoubard 1131:692ddf04fc42 1576 * or to trigger sensor data collection for transmission in the Radio Event.
vcoubard 1131:692ddf04fc42 1577 *
vcoubard 1183:1589830dbdb7 1578 * @param[in] callback
vcoubard 1183:1589830dbdb7 1579 * The application handler to be invoked in response to a radio
vcoubard 1183:1589830dbdb7 1580 * ACTIVE/INACTIVE event.
vcoubard 1131:692ddf04fc42 1581 */
vcoubard 1131:692ddf04fc42 1582 void onRadioNotification(void (*callback)(bool param)) {
vcoubard 1131:692ddf04fc42 1583 radioNotificationCallback.attach(callback);
vcoubard 1131:692ddf04fc42 1584 }
vcoubard 1183:1589830dbdb7 1585
vcoubard 1183:1589830dbdb7 1586 /**
vcoubard 1183:1589830dbdb7 1587 * Same as Gap::onRadioNotification(), but allows the posibility to
vcoubard 1183:1589830dbdb7 1588 * register an object reference and member function as handler for radio
vcoubard 1183:1589830dbdb7 1589 * notification events.
vcoubard 1183:1589830dbdb7 1590 *
vcoubard 1183:1589830dbdb7 1591 * @param[in] tptr
vcoubard 1183:1589830dbdb7 1592 * Pointer to the object of a class defining the member callback
vcoubard 1183:1589830dbdb7 1593 * function (@p mptr).
vcoubard 1183:1589830dbdb7 1594 * @param[in] mptr
vcoubard 1183:1589830dbdb7 1595 * The member callback (within the context of an object) to be
vcoubard 1183:1589830dbdb7 1596 * invoked in response to a radio ACTIVE/INACTIVE event.
vcoubard 1183:1589830dbdb7 1597 */
vcoubard 1131:692ddf04fc42 1598 template <typename T>
vcoubard 1131:692ddf04fc42 1599 void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
vcoubard 1131:692ddf04fc42 1600 radioNotificationCallback.attach(tptr, mptr);
vcoubard 1131:692ddf04fc42 1601 }
vcoubard 1131:692ddf04fc42 1602
vcoubard 1135:22aada733dbd 1603 /**
vcoubard 1135:22aada733dbd 1604 * Setup a callback to be invoked to notify the user application that the
vcoubard 1135:22aada733dbd 1605 * Gap instance is about to shutdown (possibly as a result of a call
vcoubard 1135:22aada733dbd 1606 * to BLE::shutdown()).
vcoubard 1135:22aada733dbd 1607 *
vcoubard 1183:1589830dbdb7 1608 * @param[in] callback
vcoubard 1183:1589830dbdb7 1609 * The handler that is being registered to be notified of
vcoubard 1183:1589830dbdb7 1610 * shutdown events.
vcoubard 1183:1589830dbdb7 1611 *
vcoubard 1183:1589830dbdb7 1612 * @note It is possible to chain together multiple onShutdown callbacks
vcoubard 1135:22aada733dbd 1613 * (potentially from different modules of an application) to be notified
vcoubard 1135:22aada733dbd 1614 * before the Gap instance is shutdown.
vcoubard 1135:22aada733dbd 1615 *
vcoubard 1183:1589830dbdb7 1616 * @note It is also possible to set up a callback into a member function of
vcoubard 1135:22aada733dbd 1617 * some object.
vcoubard 1135:22aada733dbd 1618 *
vcoubard 1183:1589830dbdb7 1619 * @note It is possible to unregister a callback using onShutdown().detach(callback)
vcoubard 1135:22aada733dbd 1620 */
vcoubard 1135:22aada733dbd 1621 void onShutdown(const GapShutdownCallback_t& callback) {
vcoubard 1135:22aada733dbd 1622 shutdownCallChain.add(callback);
vcoubard 1135:22aada733dbd 1623 }
vcoubard 1183:1589830dbdb7 1624
vcoubard 1183:1589830dbdb7 1625 /**
vcoubard 1183:1589830dbdb7 1626 * Same as Gap::onShutdown(), but allows the posibility to
vcoubard 1183:1589830dbdb7 1627 * register an object reference and member function as handler for shutdown
vcoubard 1183:1589830dbdb7 1628 * events.
vcoubard 1183:1589830dbdb7 1629 *
vcoubard 1183:1589830dbdb7 1630 * @param[in] objPtr
vcoubard 1183:1589830dbdb7 1631 * Pointer to the object of a class defining the member callback
vcoubard 1183:1589830dbdb7 1632 * function (@p memberPtr).
vcoubard 1183:1589830dbdb7 1633 * @param[in] memberPtr
vcoubard 1183:1589830dbdb7 1634 * The member callback (within the context of an object) to be
vcoubard 1183:1589830dbdb7 1635 * invoked in response to a shutdown event.
vcoubard 1183:1589830dbdb7 1636 */
vcoubard 1135:22aada733dbd 1637 template <typename T>
vcoubard 1192:718787de23b7 1638 void onShutdown(T *objPtr, void (T::*memberPtr)(const Gap *)) {
vcoubard 1135:22aada733dbd 1639 shutdownCallChain.add(objPtr, memberPtr);
vcoubard 1135:22aada733dbd 1640 }
vcoubard 1135:22aada733dbd 1641
vcoubard 1135:22aada733dbd 1642 /**
vcoubard 1183:1589830dbdb7 1643 * @brief Provide access to the callchain of shutdown event callbacks.
vcoubard 1183:1589830dbdb7 1644 *
vcoubard 1183:1589830dbdb7 1645 * @return A reference to the shutdown event callback chain.
vcoubard 1183:1589830dbdb7 1646 *
vcoubard 1183:1589830dbdb7 1647 * @note It is possible to register callbacks using onShutdown().add(callback).
vcoubard 1183:1589830dbdb7 1648 *
vcoubard 1183:1589830dbdb7 1649 * @note It is possible to unregister callbacks using onShutdown().detach(callback).
vcoubard 1135:22aada733dbd 1650 */
vcoubard 1135:22aada733dbd 1651 GapShutdownCallbackChain_t& onShutdown() {
vcoubard 1135:22aada733dbd 1652 return shutdownCallChain;
vcoubard 1135:22aada733dbd 1653 }
vcoubard 1135:22aada733dbd 1654
vcoubard 1135:22aada733dbd 1655 public:
vcoubard 1135:22aada733dbd 1656 /**
vcoubard 1135:22aada733dbd 1657 * Notify all registered onShutdown callbacks that the Gap instance is
vcoubard 1135:22aada733dbd 1658 * about to be shutdown and clear all Gap state of the
vcoubard 1135:22aada733dbd 1659 * associated object.
vcoubard 1135:22aada733dbd 1660 *
vcoubard 1135:22aada733dbd 1661 * This function is meant to be overridden in the platform-specific
vcoubard 1135:22aada733dbd 1662 * sub-class. Nevertheless, the sub-class is only expected to reset its
vcoubard 1135:22aada733dbd 1663 * state and not the data held in Gap members. This shall be achieved by a
vcoubard 1135:22aada733dbd 1664 * call to Gap::reset() from the sub-class' reset() implementation.
vcoubard 1135:22aada733dbd 1665 *
vcoubard 1135:22aada733dbd 1666 * @return BLE_ERROR_NONE on success.
vcoubard 1135:22aada733dbd 1667 *
vcoubard 1183:1589830dbdb7 1668 * @note Currently a call to reset() does not reset the advertising and
vcoubard 1135:22aada733dbd 1669 * scan parameters to default values.
vcoubard 1135:22aada733dbd 1670 */
vcoubard 1135:22aada733dbd 1671 virtual ble_error_t reset(void) {
vcoubard 1135:22aada733dbd 1672 /* Notify that the instance is about to shutdown */
vcoubard 1135:22aada733dbd 1673 shutdownCallChain.call(this);
vcoubard 1135:22aada733dbd 1674 shutdownCallChain.clear();
vcoubard 1135:22aada733dbd 1675
vcoubard 1135:22aada733dbd 1676 /* Clear Gap state */
vcoubard 1135:22aada733dbd 1677 state.advertising = 0;
vcoubard 1135:22aada733dbd 1678 state.connected = 0;
vcoubard 1180:e11b058d005e 1679 connectionCount = 0;
vcoubard 1135:22aada733dbd 1680
vcoubard 1135:22aada733dbd 1681 /* Clear scanning state */
vcoubard 1135:22aada733dbd 1682 scanningActive = false;
vcoubard 1135:22aada733dbd 1683
vcoubard 1135:22aada733dbd 1684 /* Clear advertising and scanning data */
vcoubard 1135:22aada733dbd 1685 _advPayload.clear();
vcoubard 1135:22aada733dbd 1686 _scanResponse.clear();
vcoubard 1135:22aada733dbd 1687
vcoubard 1135:22aada733dbd 1688 /* Clear callbacks */
vcoubard 1135:22aada733dbd 1689 timeoutCallbackChain.clear();
vcoubard 1135:22aada733dbd 1690 connectionCallChain.clear();
vcoubard 1135:22aada733dbd 1691 disconnectionCallChain.clear();
vcoubard 1135:22aada733dbd 1692 radioNotificationCallback = NULL;
vcoubard 1135:22aada733dbd 1693 onAdvertisementReport = NULL;
vcoubard 1135:22aada733dbd 1694
vcoubard 1135:22aada733dbd 1695 return BLE_ERROR_NONE;
vcoubard 1135:22aada733dbd 1696 }
vcoubard 1135:22aada733dbd 1697
vcoubard 1131:692ddf04fc42 1698 protected:
vcoubard 1183:1589830dbdb7 1699 /**
vcoubard 1183:1589830dbdb7 1700 * Construct a Gap instance.
vcoubard 1183:1589830dbdb7 1701 */
vcoubard 1131:692ddf04fc42 1702 Gap() :
vcoubard 1131:692ddf04fc42 1703 _advParams(),
vcoubard 1131:692ddf04fc42 1704 _advPayload(),
vcoubard 1131:692ddf04fc42 1705 _scanningParams(),
vcoubard 1131:692ddf04fc42 1706 _scanResponse(),
vcoubard 1180:e11b058d005e 1707 connectionCount(0),
vcoubard 1131:692ddf04fc42 1708 state(),
vcoubard 1131:692ddf04fc42 1709 scanningActive(false),
vcoubard 1131:692ddf04fc42 1710 timeoutCallbackChain(),
vcoubard 1131:692ddf04fc42 1711 radioNotificationCallback(),
vcoubard 1131:692ddf04fc42 1712 onAdvertisementReport(),
vcoubard 1131:692ddf04fc42 1713 connectionCallChain(),
vcoubard 1131:692ddf04fc42 1714 disconnectionCallChain() {
vcoubard 1131:692ddf04fc42 1715 _advPayload.clear();
vcoubard 1131:692ddf04fc42 1716 _scanResponse.clear();
vcoubard 1131:692ddf04fc42 1717 }
vcoubard 1131:692ddf04fc42 1718
vcoubard 1131:692ddf04fc42 1719 /* Entry points for the underlying stack to report events back to the user. */
vcoubard 1131:692ddf04fc42 1720 public:
vcoubard 1183:1589830dbdb7 1721 /**
vcoubard 1183:1589830dbdb7 1722 * Helper function that notifies all registered handlers of an occurrence
vcoubard 1183:1589830dbdb7 1723 * of a connection event. This function is meant to be called from the
vcoubard 1183:1589830dbdb7 1724 * BLE stack specific implementation when a connection event occurs.
vcoubard 1183:1589830dbdb7 1725 *
vcoubard 1183:1589830dbdb7 1726 * @param[in] handle
vcoubard 1183:1589830dbdb7 1727 * The ID of the connection that generated the event.
vcoubard 1183:1589830dbdb7 1728 * @param[in] role
vcoubard 1183:1589830dbdb7 1729 * The role of this BLE device in the connection.
vcoubard 1183:1589830dbdb7 1730 * @param[in] peerAddrType
vcoubard 1183:1589830dbdb7 1731 * The peer's BLE address type.
vcoubard 1183:1589830dbdb7 1732 * @param[in] peerAddr
vcoubard 1183:1589830dbdb7 1733 * The peer's BLE address.
vcoubard 1183:1589830dbdb7 1734 * @param[in] ownAddrType
vcoubard 1183:1589830dbdb7 1735 * This device's BLE address type.
vcoubard 1183:1589830dbdb7 1736 * @param[in] ownAddr
vcoubard 1183:1589830dbdb7 1737 * This device's BLE address.
vcoubard 1183:1589830dbdb7 1738 * @param[in] connectionParams
vcoubard 1183:1589830dbdb7 1739 * The parameters configured for this connection.
vcoubard 1183:1589830dbdb7 1740 */
vcoubard 1135:22aada733dbd 1741 void processConnectionEvent(Handle_t handle,
vcoubard 1135:22aada733dbd 1742 Role_t role,
vcoubard 1135:22aada733dbd 1743 BLEProtocol::AddressType_t peerAddrType,
vcoubard 1135:22aada733dbd 1744 const BLEProtocol::AddressBytes_t peerAddr,
vcoubard 1135:22aada733dbd 1745 BLEProtocol::AddressType_t ownAddrType,
vcoubard 1135:22aada733dbd 1746 const BLEProtocol::AddressBytes_t ownAddr,
vcoubard 1135:22aada733dbd 1747 const ConnectionParams_t *connectionParams) {
vcoubard 1180:e11b058d005e 1748 /* Update Gap state */
vcoubard 1180:e11b058d005e 1749 state.advertising = 0;
vcoubard 1180:e11b058d005e 1750 state.connected = 1;
vcoubard 1180:e11b058d005e 1751 ++connectionCount;
vcoubard 1180:e11b058d005e 1752
vcoubard 1131:692ddf04fc42 1753 ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
vcoubard 1131:692ddf04fc42 1754 connectionCallChain.call(&callbackParams);
vcoubard 1131:692ddf04fc42 1755 }
vcoubard 1131:692ddf04fc42 1756
vcoubard 1183:1589830dbdb7 1757 /**
vcoubard 1183:1589830dbdb7 1758 * Helper function that notifies all registered handlers of an occurrence
vcoubard 1183:1589830dbdb7 1759 * of a disconnection event. This function is meant to be called from the
vcoubard 1183:1589830dbdb7 1760 * BLE stack specific implementation when a disconnection event occurs.
vcoubard 1183:1589830dbdb7 1761 *
vcoubard 1183:1589830dbdb7 1762 * @param[in] handle
vcoubard 1183:1589830dbdb7 1763 * The ID of the connection that generated the event.
vcoubard 1183:1589830dbdb7 1764 * @param[in] reason
vcoubard 1183:1589830dbdb7 1765 * The reason for disconnection.
vcoubard 1183:1589830dbdb7 1766 */
vcoubard 1131:692ddf04fc42 1767 void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
vcoubard 1180:e11b058d005e 1768 /* Update Gap state */
vcoubard 1180:e11b058d005e 1769 --connectionCount;
vcoubard 1180:e11b058d005e 1770 if (!connectionCount) {
vcoubard 1180:e11b058d005e 1771 state.connected = 0;
vcoubard 1180:e11b058d005e 1772 }
vcoubard 1180:e11b058d005e 1773
vcoubard 1131:692ddf04fc42 1774 DisconnectionCallbackParams_t callbackParams(handle, reason);
vcoubard 1131:692ddf04fc42 1775 disconnectionCallChain.call(&callbackParams);
vcoubard 1131:692ddf04fc42 1776 }
vcoubard 1131:692ddf04fc42 1777
vcoubard 1183:1589830dbdb7 1778 /**
vcoubard 1183:1589830dbdb7 1779 * Helper function that notifies the registered handler of a scanned
vcoubard 1183:1589830dbdb7 1780 * advertisement packet. This function is meant to be called from the
vcoubard 1183:1589830dbdb7 1781 * BLE stack specific implementation when a such event occurs.
vcoubard 1183:1589830dbdb7 1782 *
vcoubard 1183:1589830dbdb7 1783 * @param[in] peerAddr
vcoubard 1183:1589830dbdb7 1784 * The peer's BLE address.
vcoubard 1183:1589830dbdb7 1785 * @param[in] rssi
vcoubard 1183:1589830dbdb7 1786 * The advertisement packet RSSI value.
vcoubard 1183:1589830dbdb7 1787 * @param[in] isScanReponse
vcoubard 1183:1589830dbdb7 1788 * Whether this packet is the response to a scan request.
vcoubard 1183:1589830dbdb7 1789 * @param[in] type
vcoubard 1183:1589830dbdb7 1790 * The type of advertisement.
vcoubard 1183:1589830dbdb7 1791 * @param[in] advertisingDataLen
vcoubard 1183:1589830dbdb7 1792 * Length of the advertisement data.
vcoubard 1183:1589830dbdb7 1793 * @param[in] advertisingData
vcoubard 1183:1589830dbdb7 1794 * Pointer to the advertisement packet's data.
vcoubard 1183:1589830dbdb7 1795 */
vcoubard 1135:22aada733dbd 1796 void processAdvertisementReport(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard 1135:22aada733dbd 1797 int8_t rssi,
vcoubard 1135:22aada733dbd 1798 bool isScanResponse,
vcoubard 1131:692ddf04fc42 1799 GapAdvertisingParams::AdvertisingType_t type,
vcoubard 1135:22aada733dbd 1800 uint8_t advertisingDataLen,
vcoubard 1135:22aada733dbd 1801 const uint8_t *advertisingData) {
vcoubard 1131:692ddf04fc42 1802 AdvertisementCallbackParams_t params;
vcoubard 1131:692ddf04fc42 1803 memcpy(params.peerAddr, peerAddr, ADDR_LEN);
vcoubard 1131:692ddf04fc42 1804 params.rssi = rssi;
vcoubard 1131:692ddf04fc42 1805 params.isScanResponse = isScanResponse;
vcoubard 1131:692ddf04fc42 1806 params.type = type;
vcoubard 1131:692ddf04fc42 1807 params.advertisingDataLen = advertisingDataLen;
vcoubard 1131:692ddf04fc42 1808 params.advertisingData = advertisingData;
vcoubard 1131:692ddf04fc42 1809 onAdvertisementReport.call(&params);
vcoubard 1131:692ddf04fc42 1810 }
vcoubard 1131:692ddf04fc42 1811
vcoubard 1183:1589830dbdb7 1812 /**
vcoubard 1183:1589830dbdb7 1813 * Helper function that notifies all registered handlers of an occurrence
vcoubard 1183:1589830dbdb7 1814 * of a timeout event. This function is meant to be called from the
vcoubard 1183:1589830dbdb7 1815 * BLE stack specific implementation when a timeout event occurs.
vcoubard 1183:1589830dbdb7 1816 *
vcoubard 1183:1589830dbdb7 1817 * @param[in] source
vcoubard 1183:1589830dbdb7 1818 * The source of the timout event.
vcoubard 1183:1589830dbdb7 1819 */
vcoubard 1131:692ddf04fc42 1820 void processTimeoutEvent(TimeoutSource_t source) {
vcoubard 1179:4ab722f8dca0 1821 if (source == TIMEOUT_SRC_ADVERTISING) {
vcoubard 1179:4ab722f8dca0 1822 /* Update gap state if the source is an advertising timeout */
vcoubard 1179:4ab722f8dca0 1823 state.advertising = 0;
vcoubard 1179:4ab722f8dca0 1824 }
vcoubard 1131:692ddf04fc42 1825 if (timeoutCallbackChain) {
vcoubard 1131:692ddf04fc42 1826 timeoutCallbackChain(source);
vcoubard 1131:692ddf04fc42 1827 }
vcoubard 1131:692ddf04fc42 1828 }
vcoubard 1131:692ddf04fc42 1829
vcoubard 1131:692ddf04fc42 1830 protected:
vcoubard 1183:1589830dbdb7 1831 /**
vcoubard 1183:1589830dbdb7 1832 * Currently set advertising parameters.
vcoubard 1183:1589830dbdb7 1833 */
vcoubard 1131:692ddf04fc42 1834 GapAdvertisingParams _advParams;
vcoubard 1183:1589830dbdb7 1835 /**
vcoubard 1183:1589830dbdb7 1836 * Currently set advertising data.
vcoubard 1183:1589830dbdb7 1837 */
vcoubard 1131:692ddf04fc42 1838 GapAdvertisingData _advPayload;
vcoubard 1183:1589830dbdb7 1839 /**
vcoubard 1183:1589830dbdb7 1840 * Currently set scanning parameters.
vcoubard 1183:1589830dbdb7 1841 */
vcoubard 1131:692ddf04fc42 1842 GapScanningParams _scanningParams;
vcoubard 1183:1589830dbdb7 1843 /**
vcoubard 1183:1589830dbdb7 1844 * Currently set scan response data.
vcoubard 1183:1589830dbdb7 1845 */
vcoubard 1131:692ddf04fc42 1846 GapAdvertisingData _scanResponse;
vcoubard 1131:692ddf04fc42 1847
vcoubard 1180:e11b058d005e 1848 /**
vcoubard 1180:e11b058d005e 1849 * Total number of open connections.
vcoubard 1180:e11b058d005e 1850 */
vcoubard 1180:e11b058d005e 1851 uint8_t connectionCount;
vcoubard 1183:1589830dbdb7 1852 /**
vcoubard 1183:1589830dbdb7 1853 * The current GAP state.
vcoubard 1183:1589830dbdb7 1854 */
vcoubard 1131:692ddf04fc42 1855 GapState_t state;
vcoubard 1183:1589830dbdb7 1856 /**
vcoubard 1183:1589830dbdb7 1857 * Whether active scanning is set. This is used to fetch the scan response
vcoubard 1183:1589830dbdb7 1858 * from a peer if possible.
vcoubard 1183:1589830dbdb7 1859 */
vcoubard 1131:692ddf04fc42 1860 bool scanningActive;
vcoubard 1131:692ddf04fc42 1861
vcoubard 1131:692ddf04fc42 1862 protected:
vcoubard 1183:1589830dbdb7 1863 /**
vcoubard 1183:1589830dbdb7 1864 * Callchain containing all registered callback handlers for timeout
vcoubard 1183:1589830dbdb7 1865 * events.
vcoubard 1183:1589830dbdb7 1866 */
vcoubard 1131:692ddf04fc42 1867 TimeoutEventCallbackChain_t timeoutCallbackChain;
vcoubard 1183:1589830dbdb7 1868 /**
vcoubard 1183:1589830dbdb7 1869 * The registered callback handler for radio notification events.
vcoubard 1183:1589830dbdb7 1870 */
vcoubard 1131:692ddf04fc42 1871 RadioNotificationEventCallback_t radioNotificationCallback;
vcoubard 1183:1589830dbdb7 1872 /**
vcoubard 1183:1589830dbdb7 1873 * The registered callback handler for scanned advertisement packet
vcoubard 1183:1589830dbdb7 1874 * notifications.
vcoubard 1183:1589830dbdb7 1875 */
vcoubard 1131:692ddf04fc42 1876 AdvertisementReportCallback_t onAdvertisementReport;
vcoubard 1183:1589830dbdb7 1877 /**
vcoubard 1183:1589830dbdb7 1878 * Callchain containing all registered callback handlers for connection
vcoubard 1183:1589830dbdb7 1879 * events.
vcoubard 1183:1589830dbdb7 1880 */
vcoubard 1131:692ddf04fc42 1881 ConnectionEventCallbackChain_t connectionCallChain;
vcoubard 1183:1589830dbdb7 1882 /**
vcoubard 1183:1589830dbdb7 1883 * Callchain containing all registered callback handlers for disconnection
vcoubard 1183:1589830dbdb7 1884 * events.
vcoubard 1183:1589830dbdb7 1885 */
vcoubard 1131:692ddf04fc42 1886 DisconnectionEventCallbackChain_t disconnectionCallChain;
vcoubard 1131:692ddf04fc42 1887
vcoubard 1131:692ddf04fc42 1888 private:
vcoubard 1183:1589830dbdb7 1889 /**
vcoubard 1183:1589830dbdb7 1890 * Callchain containing all registered callback handlers for shutdown
vcoubard 1183:1589830dbdb7 1891 * events.
vcoubard 1183:1589830dbdb7 1892 */
vcoubard 1135:22aada733dbd 1893 GapShutdownCallbackChain_t shutdownCallChain;
vcoubard 1135:22aada733dbd 1894
vcoubard 1135:22aada733dbd 1895 private:
vcoubard 1131:692ddf04fc42 1896 /* Disallow copy and assignment. */
vcoubard 1131:692ddf04fc42 1897 Gap(const Gap &);
vcoubard 1131:692ddf04fc42 1898 Gap& operator=(const Gap &);
vcoubard 1131:692ddf04fc42 1899 };
vcoubard 1131:692ddf04fc42 1900
rgrover1 710:b2e1a2660ec2 1901 #endif // ifndef __GAP_H__