Diff: ble/UUID.h

Revision:

710:b2e1a2660ec2

Child:

844:96aedb87cdd4

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ble/UUID.h	Fri Jun 19 15:53:28 2015 +0100
@@ -0,0 +1,143 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __UUID_H__
+#define __UUID_H__
+
+#include <stdint.h>
+#include <string.h>
+
+#include "blecommon.h"
+
+class UUID {
+public:
+    enum UUID_Type_t {
+        UUID_TYPE_SHORT = 0,    // Short BLE UUID
+        UUID_TYPE_LONG  = 1     // Full 128-bit UUID
+    };
+
+    typedef uint16_t      ShortUUIDBytes_t;
+
+    static const unsigned LENGTH_OF_LONG_UUID = 16;
+    typedef uint8_t       LongUUIDBytes_t[LENGTH_OF_LONG_UUID];
+
+public:
+    /**
+     * Creates a new 128-bit UUID
+     *
+     * @note   The UUID is a unique 128-bit (16 byte) ID used to identify
+     *         different service or characteristics on the BLE device.
+     *
+     * @param longUUID
+     *          The 128-bit (16-byte) UUID value, MSB first (big-endian).
+     */
+    UUID(const LongUUIDBytes_t longUUID) : type(UUID_TYPE_LONG), baseUUID(), shortUUID(0) {
+        setupLong(longUUID);
+    }
+
+    /**
+     * Creates a new 16-bit UUID
+     *
+     * @note The UUID is a unique 16-bit (2 byte) ID used to identify
+     *       different service or characteristics on the BLE device.
+     *
+     * For efficiency, and because 16 bytes would take a large chunk of the
+     * 27-byte data payload length of the Link Layer, the BLE specification adds
+     * two additional UUID formats: 16-bit and 32-bit UUIDs. These shortened
+     * formats can be used only with UUIDs that are defined in the Bluetooth
+     * specification (i.e., that are listed by the Bluetooth SIG as standard
+     * Bluetooth UUIDs).
+     *
+     * To reconstruct the full 128-bit UUID from the shortened version, insert
+     * the 16-bit short value (indicated by xxxx, including leading zeros) into
+     * the Bluetooth Base UUID:
+     *
+     *  0000xxxx-0000-1000-8000-00805F9B34FB
+     *
+     * @note Shortening is not available for UUIDs that are not derived from the
+     *       Bluetooth Base UUID. Such non-standard UUIDs are commonly called
+     *       vendor-specific UUIDs. In these cases, you’ll need to use the full
+     *       128-bit UUID value at all times.
+     *
+     * @note we don't yet support 32-bit shortened UUIDs.
+     */
+    UUID(ShortUUIDBytes_t shortUUID) : type(UUID_TYPE_SHORT), baseUUID(), shortUUID(shortUUID) {
+        /* empty */
+    }
+
+    UUID(const UUID &source) {
+        type      = source.type;
+        shortUUID = source.shortUUID;
+        memcpy(baseUUID, source.baseUUID, LENGTH_OF_LONG_UUID);
+    }
+
+    UUID(void) : type(UUID_TYPE_SHORT), shortUUID(BLE_UUID_UNKNOWN) {
+        /* empty */
+    }
+
+    /**
+     * Fill in a 128-bit UUID; this is useful when UUID isn't known at the time of object construction.
+     */
+    void setupLong(const LongUUIDBytes_t longUUID) {
+        type      = UUID_TYPE_LONG;
+        memcpy(baseUUID, longUUID, LENGTH_OF_LONG_UUID);
+        shortUUID = (uint16_t)((longUUID[2] << 8) | (longUUID[3]));
+    }
+
+public:
+    UUID_Type_t       shortOrLong(void)  const {return type;     }
+    const uint8_t    *getBaseUUID(void)  const {
+        if (type == UUID_TYPE_SHORT) {
+            return (const uint8_t*)&shortUUID;
+        } else {
+            return baseUUID;
+        }
+    }
+
+    ShortUUIDBytes_t  getShortUUID(void) const {return shortUUID;}
+    uint8_t           getLen(void)       const {
+        return ((type == UUID_TYPE_SHORT) ? sizeof(ShortUUIDBytes_t) : LENGTH_OF_LONG_UUID);
+    }
+
+    bool operator== (const UUID &other) const {
+        if ((this->type == UUID_TYPE_SHORT) && (other.type == UUID_TYPE_SHORT) &&
+            (this->shortUUID == other.shortUUID)) {
+            return true;
+        }
+
+        if ((this->type == UUID_TYPE_LONG) && (other.type == UUID_TYPE_LONG) &&
+            (memcmp(this->baseUUID, other.baseUUID, LENGTH_OF_LONG_UUID) == 0)) {
+            return true;
+        }
+
+        return false;
+    }
+
+    bool operator!= (const UUID &other) const {
+        return !(*this == other);
+    }
+
+private:
+    UUID_Type_t      type;      // UUID_TYPE_SHORT or UUID_TYPE_LONG
+    LongUUIDBytes_t  baseUUID;  /* the base of the long UUID (if
+                            * used). Note: bytes 12 and 13 (counting from LSB)
+                            * are zeroed out to allow comparison with other long
+                            * UUIDs which differ only in the 16-bit relative
+                            * part.*/
+    ShortUUIDBytes_t shortUUID; // 16 bit uuid (byte 2-3 using with base)
+};
+
+#endif // ifndef __UUID_H__
\ No newline at end of file