BSP library for DISCO-STM32F746NG board. Added support for on-board QSPI Flash memory MICRO N25Q128A. Ported from library BSP_DISCO_L476VG.
Fork of BSP_DISCO_F746NG by
STM32F746G_DISCOVERY_QSPI_Exported_Functions
[STM32F746G-DISCOVERY QSPI]
Functions | |
uint8_t | BSP_QSPI_Init (void) |
Initializes the QSPI interface. | |
uint8_t | BSP_QSPI_DeInit (void) |
De-Initializes the QSPI interface. | |
uint8_t | BSP_QSPI_Read (uint8_t *pData, uint32_t ReadAddr, uint32_t Size) |
Reads an amount of data from the QSPI memory. | |
uint8_t | BSP_QSPI_Write (uint8_t *pData, uint32_t WriteAddr, uint32_t Size) |
Writes an amount of data to the QSPI memory. | |
uint8_t | BSP_QSPI_Erase_Block (uint32_t BlockAddress) |
Erases the specified block of the QSPI memory. | |
uint8_t | BSP_QSPI_Erase_Sector (uint32_t Sector) |
Erases the specified sector of the QSPI memory. | |
uint8_t | BSP_QSPI_Erase_Chip (void) |
Erases the entire QSPI memory. | |
uint8_t | BSP_QSPI_GetStatus (void) |
Reads current status of the QSPI memory. | |
uint8_t | BSP_QSPI_GetInfo (QSPI_Info *pInfo) |
Return the configuration of the QSPI memory. | |
uint8_t | BSP_QSPI_EnableMemoryMappedMode (void) |
Configure the QSPI in memory-mapped mode. | |
uint8_t | BSP_QSPI_SuspendErase (void) |
This function suspends an ongoing erase command. | |
uint8_t | BSP_QSPI_ResumeErase (void) |
This function resumes a paused erase command. |
Function Documentation
uint8_t BSP_QSPI_DeInit | ( | void | ) |
De-Initializes the QSPI interface.
- Return values:
-
QSPI memory status
Definition at line 165 of file stm32746g_discovery_qspi.c.
uint8_t BSP_QSPI_EnableMemoryMappedMode | ( | void | ) |
Configure the QSPI in memory-mapped mode.
- Return values:
-
QSPI memory status
Definition at line 506 of file stm32746g_discovery_qspi.c.
uint8_t BSP_QSPI_Erase_Block | ( | uint32_t | BlockAddress ) |
Erases the specified block of the QSPI memory.
- Parameters:
-
BlockAddress,: Block address to erase
- Return values:
-
QSPI memory status
Definition at line 308 of file stm32746g_discovery_qspi.c.
uint8_t BSP_QSPI_Erase_Chip | ( | void | ) |
Erases the entire QSPI memory.
- Return values:
-
QSPI memory status
Definition at line 397 of file stm32746g_discovery_qspi.c.
uint8_t BSP_QSPI_Erase_Sector | ( | uint32_t | Sector ) |
Erases the specified sector of the QSPI memory.
- Parameters:
-
Sector,: Sector address to erase (0 to 255)
- Return values:
-
QSPI memory status
- Note:
- This function is non blocking meaning that sector erase operation is started but not completed when the function returns. Application has to call BSP_QSPI_GetStatus() to know when the device is available again (i.e. erase operation completed).
Definition at line 356 of file stm32746g_discovery_qspi.c.
uint8_t BSP_QSPI_GetInfo | ( | QSPI_Info * | pInfo ) |
Return the configuration of the QSPI memory.
- Parameters:
-
pInfo,: pointer on the configuration structure
- Return values:
-
QSPI memory status
Definition at line 490 of file stm32746g_discovery_qspi.c.
uint8_t BSP_QSPI_GetStatus | ( | void | ) |
Reads current status of the QSPI memory.
- Return values:
-
QSPI memory status
Definition at line 437 of file stm32746g_discovery_qspi.c.
uint8_t BSP_QSPI_Init | ( | void | ) |
Initializes the QSPI interface.
- Return values:
-
QSPI memory status
Definition at line 120 of file stm32746g_discovery_qspi.c.
uint8_t BSP_QSPI_Read | ( | uint8_t * | pData, |
uint32_t | ReadAddr, | ||
uint32_t | Size | ||
) |
Reads an amount of data from the QSPI memory.
- Parameters:
-
pData,: Pointer to data to be read ReadAddr,: Read start address Size,: Size of data to read
- Return values:
-
QSPI memory status
Definition at line 188 of file stm32746g_discovery_qspi.c.
uint8_t BSP_QSPI_ResumeErase | ( | void | ) |
This function resumes a paused erase command.
- Return values:
-
QSPI memory status
Definition at line 586 of file stm32746g_discovery_qspi.c.
uint8_t BSP_QSPI_SuspendErase | ( | void | ) |
This function suspends an ongoing erase command.
- Return values:
-
QSPI memory status
Definition at line 539 of file stm32746g_discovery_qspi.c.
uint8_t BSP_QSPI_Write | ( | uint8_t * | pData, |
uint32_t | WriteAddr, | ||
uint32_t | Size | ||
) |
Writes an amount of data to the QSPI memory.
- Parameters:
-
pData,: Pointer to data to be written WriteAddr,: Write start address Size,: Size of data to write
- Return values:
-
QSPI memory status
Definition at line 228 of file stm32746g_discovery_qspi.c.
Generated on Fri Dec 21 2018 21:22:25 by
